Provided by: libbobcat-dev_5.11.01-1_amd64 
NAME
FBB::SyslogStream - An output stream inserting syslog messages
SYNOPSIS
#include <bobcat/syslogstream>
Linking option: -lbobcat
DESCRIPTION
FBB::SyslogStream objects may be used as a std::ostream to write syslog messages using
stream facilities.
Multiple separate insertions can be used to create a single syslog message: the message is
only sent to the syslog daemon after receiving a flush command (e.g., after inserting
std::flush or std::endl). Non-printable characters (like ’\n’) show up in the syslog
message as octal values, preceded by # (e.g., #012 for ’\n’). The newline normally
inserted by std::endl is ignored: SyslogStream objects interpret std::endl like
std::flush.
One series of insertions may contain multiple std::endl or std::flush manipulators. At
each of these manipulators a new message is sent to the syslog daemon, containing all info
that has so far been buffered. After sending a message to the syslog daemon, the
SyslogStream’s internal buffer is cleared.
NAMESPACE
FBB
All constructors, members, operators and manipulators, mentioned in this man-page, are
defined in the namespace FBB.
INHERITS FROM
std::ostream
ENUMERATIONS
The following enumerations are defined in the namespace FBB:
Priority:
The values of this enumeration match the corresponding priority LOG_xxx values used with
syslog(3):
o EMERG:
system is unusable;
o ALERT:
action must be taken immediately;
o CRIT:
critical conditions;
o ERR:
error conditions;
o WARNING:
warning conditions;
o NOTICE:
normal, but significant, condition;
o INFO:
informational message;
o DEBUG:
debug-level message; The setMask member (see below) can be used to select which
type of messages will actually be processed by the syslog daemon.
PriorityType:
This enumeration has two values fine-tuning the type of messages that are actually
processed by the syslog daemon:
o SINGLE:
Only messages of the priority specified at the setMask call are processed by the
syslog daemon;
o UPTO:
Messages of priority EMERG up to the the priority specified at the setMask call are
processed by the syslog daemon; By default, the syslog daemon processes all
messages it receives.
Facility:
The values of this enumeration match the corresponding facility LOG_xxx values used with
syslog(3):
o AUTHPRIV:
security/authorization messages (private)
o CRON:
clock daemon (cron and at)
o DAEMON:
other system daemons
o KERN:
kernel messages
o LOCAL0:
reserved for local use. LOCAL1 through LOCAL7 are available as well.
o LPR:
line printer subsystem
o MAIL:
mail subsystem
o NEWS:
USENET news subsystem
o SYSLOGBUF:
messages generated internally by syslogbufd
o USER:
generic user-level messages
o UUCP:
UUCP subsystem
CONSTRUCTORS
o SyslogStream(string const &ident = "", FBB::Priority priority = FBB::NOTICE,
FBB::Facility facility = FBB::USER, int option = 0):
This constructor initializes a SyslogStream object. The ident parameter is usually
the name of the program. Its content are prepended to syslog messages.
The priority parameter determines the default importance of the message sent to the
syslog daemon. By default messages are sent to the syslog daemon with priority
FBB::NOTICE. Syslog messages may be given different priority by inserting a
SyslogStream manipulator (see below). The priority set at construction time may
also be modified using the setPriority and setDefaultPriority members.
Which messages actually appear in log facilities is not determined by the messages’
priorities, but by syslog’s log mask. The log mask can be set by the static member
setMask (see below).
The facility parameter determines the type of program doing the logging. By default
FBB::USER is used.
The option parameter may be used to specify various options (use the binary `bitor’
(`|’) operator to combine options):
LOG_CONS: write directly to system console if there is an error while sending
to system logger
LOG_NDELAY: open the connection immediately (normally, the con- nection is opened
when the first message is logged)
LOG_PERROR: print to stderr as well
LOG__PID: include PID with each message
By default no options are used.
Copy and move constructors (and assignment operators) are not available.
MEMBER FUNCTIONS
All members of std::ostream are available, as FBB::SyslogStream inherits from this class.
o void close():
If the SyslogStream’s internal buffer is not empty it is flushed to the syslog
daemon. Thereafer closelog(3) is called.
o Priority defaultPriority() const:
Returns the current default priority. I.e., the priority that will be used for the
messages after inserting endl or flush.
o void open(string const &ident, FBB::Priority priority = FBB::NOTICE, FBB::Facility
facility = FBB::USER, int option = 0):
Redefines the current identifier, priority, facility and options that are used when
sending messages to the syslog daemon. If the SyslogStream’s internal buffer is not
empty it is first flushed to the syslog daemon using the identifier, priority and
options that were active just before calling open.
o Priority priority() const:
Returns the next priority. I.e., the priority that will be used for the next
message that is sent to the syslog daemon.
o Priority setDefaultPriority(Priority priority):
Changes the default priority of the next message that is sent to the syslog daemon
after inserting std::eoln or std::flush. The previously active default priority is
returned.
o Priority setPriority(Priority priority):
Changes the priority for the next message that is sent to the syslog daemon after
inserting std::eoln or std::flush. Subsequent messages will again use the default
priority. The previously active priority setting is returned.
STATIC MEMBER FUNCTIONS
o Priority setMask(Priority priority, PriorityMask upTo):
Syslog messages of (if upTo equals SINGLE) or up to (if upTo equals UPTO) the
indicated priority are processed by the syslog daemon.
o Priority setMask(Priority priority, Priority ...priorities):
Syslog messages of the priorities passed to setMask are processed by the syslog
daemon. At least one priority must be specified.
o Facility stoF(std::string const &name, Facility facility = USER):
Returns the facility matching the name of the facility provided by name. Facility
matching is performed case insensitively. E.g., if name contains daemon, facility
FBB::DAEMON is returned. If name does not match any facility name then the value of
this function’s second argument is returned. The function’s name (stoF) was used in
analogy of the various sto... conversion functions that were made available by the
C++11 standard.
o Priority stoP(std::string const &name, Priority priority = NOTICE):
Returns the priority matching the name of the priority provided by name. Priority
matching is performed case insensitively. E.g., if name contains emerg, priority
FBB::EMERG is returned. If name does not match any priority name then the value of
this function’s second argument is returned. The function’s name (stoP) was used in
analogy of the various sto... conversion functions that were made available by the
C++11 standard.
MANIPULATORS
The following set of manipulators are all defined as (static) members. They may be
inserted into an FBB::SyslogStream object. Except for the last manipulator (strerrno),
they have the following characteristics in common:
o They change the priority of the messages that are subsequently inserted by the
FBB::SyslogStream object, thus acting like a separate setPriority call.
o When inserting multiple manipulators before the inserted message is flushed (e.g.,
using the std::flush or the std::endl manipulators) the last inserted
FBB::SyslogStream manipulator will be used.
o If the manipulators are not inserted into an FBB::SyslogStream object (but in
another std::ostream type of object) then they perform no action.
Here are the available manipulators:
o SyslogStream::alert:
Messages are inserted with priority FBB::ALERT.
o SyslogStream::crit:
Message are inserted with priority FBB::CRIT.
o SyslogStream::debug:
Messages are inserted with priority FBB::DEBUG.
o SyslogStream::emerg:
Messages are inserted with priority FBB::EMERG.
o SyslogStream::err:
Messages are inserted with priority FBB::ERR.
o SyslogStream::info:
Messages are inserted with priority FBB::INFO.
o SyslogStream::notice:
Messages are inserted with priority FBB::NOTICE.
o SyslogStream::strerrno:
This manipulator inserts the textual interpretation of std::errno’s current value
into a std::ostream. Note that, different from the other manipulators, the object
into which this manipulator is inserted does not have to be a FBB::SyslogStream
object.
o SyslogStream::warning:
Messages are inserted with priority FBB::WARNING.
EXAMPLE
#include <bobcat/syslogstream>
using namespace std;
using namespace FBB;
int main(int argc, char **argv)
{
SyslogStream sls(argv[0]);
sls << SyslogStream::debug << "Hello world" << flush <<
SyslogStream::strerrno << endl;
}
FILES
bobcat/syslogstream - defines the class interface
SEE ALSO
bobcat(7), closelog(3), openlog(3), rsyslogd(8), syslog(3), syslogbuf(3bobcat)
BUGS
The constructor’s option parameter is an int. Because of this, int values rather than
enumeration values are passed to the constructor. It is the responsibility of the
programmer to pass defined option values only.
BOBCAT PROJECT FILES
o https://fbb-git.gitlab.io/bobcat/: gitlab project page;
o bobcat_5.11.01-x.dsc: detached signature;
o bobcat_5.11.01-x.tar.gz: source archive;
o bobcat_5.11.01-x_i386.changes: change log;
o libbobcat1_5.11.01-x_*.deb: debian package containing the libraries;
o libbobcat1-dev_5.11.01-x_*.deb: debian package containing the libraries, headers
and manual pages;
BOBCAT
Bobcat is an acronym of `Brokken’s Own Base Classes And Templates’.
COPYRIGHT
This is free software, distributed under the terms of the GNU General Public License
(GPL).
AUTHOR
Frank B. Brokken (f.b.brokken@rug.nl).