Provided by: tcl-udp_1.0.11-2_amd64 
NAME
udp - Create UDP sockets in Tcl
SYNOPSIS
package require Tcl 8.2
package require udp 1.0.11
udp_open ?port? ?reuse? ?ipv6?
udp_conf sock host port
udp_conf sock ?-myport? ?-remote? ?-peer? ?-broadcast bool? ?-ttl count? ?-mcastadd
"groupaddr ?netwif?"? ?-mcastdrop "groupaddr ?netwif?"? ?-mcastgroups? ?-mcastloop bool?
udp_peek sock ?buffersize?
_________________________________________________________________
DESCRIPTION
This package provides support for using UDP through Tcl. The package provides a new
channel type and attempts to permit the use of packet oriented UDP over stream oriented
Tcl channels. The package defined three commands but udp_conf should be considered
depreciated in favour of the standard Tcl command fconfigure.
COMMANDS
udp_open ?port? ?reuse? ?ipv6?
udp_open will open a UDP socket. If a port is specified the UDP socket will be
opened on that port. Otherwise the system will choose a port and the user can use
the udp_conf command to obtain the port number if required.
The following keywords can be used to specify options on the opened socket.
reuse Using this keyword sets the SO_REUSEADDR socket option which permits
multiple sockets to be bound to the same address/port combination.
ipv6 By default a IPv4 socket is created. When keyword ipv6 is specified an IPv6
socket is opened.
udp_conf sock host port
Deprecated in favour of the standard Tcl fconfigure command.
udp_conf in this configuration is used to specify the remote destination for
packets written to this sock. You must call this command before writing data to the
UDP socket.
udp_conf sock ?-myport? ?-remote? ?-peer? ?-broadcast bool? ?-ttl count? ?-mcastadd
"groupaddr ?netwif?"? ?-mcastdrop "groupaddr ?netwif?"? ?-mcastgroups? ?-mcastloop bool?
Deprecated in favour of the standard Tcl fconfigure command.
In addition to being used to configure the remote host, the udp_conf command is
used to obtain information about the UDP socket. NOTE all these options are now
available using the standard Tcl fconfigure command.
-myport
Returns the local port number of the socket.
-remote
Returns the remote hostname and port number as set using udp_conf sock host
port.
-peer Returns the remote hostname and port number for the packet most recently
received by this socket.
-broadcast ?boolean?
UDP packets can listen and send on the broadcast address. For some systems a
flag must be set on the socket to use broadcast. With no argument this
option will return the broadcast setting. With a boolean argument the
setting can be modified. This option is not permitted when using IPv6.
-ttl ?count?
The time-to-live is given as the number of router hops the packet may do.
For multicast packets this is important in specifying the distribution of
the packet. The system default for multicast is 1 which restricts the packet
to the local subnet. To permit packets to pass routers, you must increase
the ttl. A value of 31 should keep it within a site, while 255 is global.
-mcastadd groupaddr
-mcastadd "groupaddr netwif"
-mcastdrop groupaddr
-mcastdrop "groupaddr netwif"
-mcastgroups
tcludp sockets can support IPv4 and IPv6 multicast operations. To receive
multicast packets the application has to notify the operating system that it
should join a particular multicast group. For IPv4 these are specified as
addresses in the range 224.0.0.0 to 239.255.255.255.
When specifying only the groupaddr the system will determine the network
interface to use. Specifying the netwif will join a multicast group on a
specific network interface. This is useful on a multihomed system with
multiple network interfaces. On windows you must specify the network
interface index. For other platforms the network interface (e.g. 'eth0')
name can be specified.
To view the current set of multicast groups for a channel use -mcastgroups
-mcastloop ?boolean?
With multicast udp the system can choose to receive packets that it has sent
or it can drop them. This is known as multicast loopback and can be
controlled using this option. By default the value is true and your
application will receive its own transmissions.
udp_peek sock ?buffersize?
Examine a packet without removing it from the buffer. Option buffersize specifies
the maximum buffer size. Value must be between 0 and 16.
This function is not available on windows.
EXAMPLES
# Send data to a remote UDP socket
proc udp_puts {host port} {
set s [udp_open]
fconfigure $s -remote [list $host $port]
puts $s "Hello, World"
close $f
}
# A simple UDP server
package require udp
proc udpEventHandler {sock} {
set pkt [read $sock]
set peer [fconfigure $sock -peer]
puts "$peer: [string length $pkt] {$pkt}"
return
}
proc udp_listen {port} {
set srv [udp_open $port]
fconfigure $srv -buffering none -translation binary
fileevent $srv readable [list ::udpEventHandler $srv]
puts "Listening on udp port: [fconfigure $srv -myport]"
return $srv
}
set sock [udp_listen 53530]
vwait forever
close $sock
# A multicast demo.
proc udpEvent {chan} {
set data [read $chan]
set peer [fconfigure $chan -peer]
puts "$peer [string length $data] '$data'"
if {[string match "QUIT*" $data]} {
close $chan
set ::forever 1
}
return
}
set group 224.5.1.21
set port 7771
set s [udp_open $port]
fconfigure $s -buffering none -blocking 0
fconfigure $s -mcastadd $group -remote [list $group $port]
fileevent $s readable [list udpEvent $s]
puts -nonewline $s "hello, world"
set ::forever 0
vwait ::forever
exit
HISTORY
Some of the code in this extension is copied from Michael Miller's tcludp package.
(http://www.neosoft.com/tcl/ftparchive/sorted/comm/tcludp-1.0/) Compared with Michael's
UDP extension, this extension provides Windows support and provides the ability of using
'gets/puts' to read/write the socket. In addition, it provides more configuration ability.
Enhancements to support binary data and to setup the package for the Tcl Extension
Architecture by Pat Thoyts.
Support for IPv6 and allowing a multicast join on a specific network interface is added by
Huub Eikens.
SEE ALSO
socket(3tcl)
KEYWORDS
networking, socket, udp
COPYRIGHT
Copyright (c) 1999-2000 Columbia University; all rights reserved