Provided by: freebsd-manpages_12.2-1_all bug

NAME

     ng_tag — mbuf tags manipulating netgraph node type

SYNOPSIS

     #include <netgraph/ng_tag.h>

DESCRIPTION

     The tag node type allows mbuf packet tags (see mbuf_tags(9)) to be examined, stripped or
     applied to data travelling through a Netgraph network.  Mbuf tags are used in many parts of
     the FreeBSD kernel network subsystem, including the storage of VLAN tags as described in
     vlan(4), Mandatory Access Control (MAC) labels as described in mac(9), IPsec policy
     information as described in ipsec(4), and packet filter tags used by pf(4).  One should also
     consider useful setting or checking ipfw(8) tags, which are implemented as mbuf tags, too.

     Each node allows an arbitrary number of connections to arbitrarily named hooks.  With each
     hook is associated a tag which will be searched in the list of all tags attached to a packet
     incoming to this hook, a destination hook for matching packets, a destination hook for non-
     matching packets, a tag which will be appended to data leaving node through this hook, and
     various statistics counters.

     The list of incoming packet's tags is traversed to find a tag with specified type and cookie
     values.  Upon match, if specified tag_len is non-zero, tag_data of tag is checked to be
     identical to that specified in the hook structure.  Packets with matched tags are forwarded
     to “match” destination hook, or forwarded to “non-match” hook otherwise.  Either or both
     destination hooks can be an empty string, or may not exist, in which case the packet is
     dropped.

     Tag list of packets leaving the node is extended with a new tag specified in outgoing hook
     structure (it is possible to avoid appending a new tag to pass packet completely unchanged
     by specifying zero type and cookie values in the structure of the corresponding outgoing
     hook).  Additionally, a tag can be stripped from incoming packet after match if strip flag
     is set.  This can be used for simple tag removal or tag replacement, if combined with tag
     addition on outgoing matching hook.  Note that new tag is appended unconditionally, without
     checking if such a tag is already present in the list (it is up to user to check if this is
     a concern).

     New hooks are initially configured to drop all incoming packets (as all hook names are empty
     strings; zero values can be specified to forward all packets to non-matching hook), and to
     forward all outgoing packets without any tag appending.

     Data payload of packets passing through the node is completely unchanged, all operations can
     affect tag list only.

HOOKS

     This node type supports any number of hooks having arbitrary names.  In order to allow
     internal optimizations, user should never try to configure a hook with a structure pointing
     to hooks which do not exist yet.  The safe way is to create all hooks first, then begin to
     configure them.

CONTROL MESSAGES

     This node type supports the generic control messages, plus the following:

     NGM_TAG_SET_HOOKIN (sethookin)
          This command sets tag values which will be searched in the tag list of incoming packets
          on a hook.  The following structure must be supplied as an argument:

              struct ng_tag_hookin {
                char            thisHook[NG_HOOKSIZ];     /* name of hook */
                char            ifMatch[NG_HOOKSIZ];      /* match dest hook */
                char            ifNotMatch[NG_HOOKSIZ];   /* !match dest hook */
                uint8_t         strip;                    /* strip tag if found */
                uint32_t        tag_cookie;               /* ABI/Module ID */
                uint16_t        tag_id;                   /* tag ID */
                uint16_t        tag_len;                  /* length of data */
                uint8_t         tag_data[0];              /* tag data */
              };

          The hook to be updated is specified in thisHook.  Data bytes of tag corresponding to
          specified tag_id (type) and tag_cookie are placed in the tag_data array; there must be
          tag_len of them.  Matching and non-matching incoming packets are delivered out the
          hooks named ifMatch and ifNotMatch, respectively.  If strip flag is non-zero, then
          found tag is deleted from list of packet tags.

     NGM_TAG_GET_HOOKIN (gethookin)
          This command takes an ASCII string argument, the hook name, and returns the
          corresponding struct ng_tag_hookin as shown above.

     NGM_TAG_SET_HOOKOUT (sethookout)
          This command sets tags values which will be applied to outgoing packets.  The following
          structure must be supplied as an argument:

              struct ng_tag_hookout {
                char            thisHook[NG_HOOKSIZ];     /* name of hook */
                uint32_t        tag_cookie;               /* ABI/Module ID */
                uint16_t        tag_id;                   /* tag ID */
                uint16_t        tag_len;                  /* length of data */
                uint8_t         tag_data[0];              /* tag data */
              };

          The hook to be updated is specified in thisHook.  Other variables mean basically the
          same as in struct ng_tag_hookin shown above, except used for setting values in a new
          tag.

     NGM_TAG_GET_HOOKOUT (gethookout)
          This command takes an ASCII string argument, the hook name, and returns the
          corresponding struct ng_tag_hookout as shown above.

     NGM_TAG_GET_STATS (getstats)
          This command takes an ASCII string argument, the hook name, and returns the statistics
          associated with the hook as a struct ng_tag_hookstat.

     NGM_TAG_CLR_STATS (clrstats)
          This command takes an ASCII string argument, the hook name, and clears the statistics
          associated with the hook.

     NGM_TAG_GETCLR_STATS (getclrstats)
          This command is identical to NGM_TAG_GET_STATS, except that the statistics are also
          atomically cleared.

     Note: statistics counters as well as three statistics messages above work only if code was
     compiled with the NG_TAG_DEBUG option.  The reason for this is that statistics is rarely
     used in practice, but still consumes CPU cycles for every packet.  Moreover, it is even not
     accurate on SMP systems due to lack of synchronization between threads, as this is very
     expensive.

SHUTDOWN

     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have
     been disconnected.

EXAMPLES

     It is possible to do a simple L7 filtering by using ipfw(8) tags in conjunction with
     ng_bpf(4) traffic analyzer.  Example below explains how to filter DirectConnect P2P network
     data traffic, which cannot be done by usual means as it uses random ports.  It is known that
     such data connection always contains a TCP packet with 6-byte payload string "$Send|".  So
     ipfw's netgraph action will be used to divert all TCP packets to an ng_bpf(4) node which
     will check for the specified string and return non-matching packets to ipfw(8).  Matching
     packets are passed to ng_tag node, which will set a tag and pass them back to ng_bpf(4) node
     on a hook programmed to accept all packets and pass them back to ipfw(8).  A script provided
     in ng_bpf(4) manual page will be used for programming node.  Note that packets diverted from
     ipfw(8) to Netgraph have no link-level header, so offsets in tcpdump(1) expressions must be
     altered accordingly.  Thus, there will be expression “ether[40:2]=0x244c &&
     ether[42:4]=0x6f636b20” on incoming hook and empty expression to match all packets from
     ng_tag.

     So, this is ngctl(8) script for nodes creating and naming for easier access:

         /usr/sbin/ngctl -f- <<-SEQ
                 mkpeer ipfw: bpf 41 ipfw
                 name ipfw:41 dcbpf
                 mkpeer dcbpf: tag matched th1
                 name dcbpf:matched ngdc
         SEQ

     Now “ngdc” node (which is of type ng_tag) must be programmed to echo all packets received on
     the “th1” hook back, with the ipfw(8) tag 412 attached.  MTAG_IPFW value for tag_cookie was
     taken from file <netinet/ip_fw.h> and value for tag_id is tag number (412), with zero tag
     length:

         ngctl msg ngdc: sethookin { thisHook=\"th1\" ifNotMatch=\"th1\" }
         ngctl msg ngdc: sethookout { thisHook=\"th1\" \
           tag_cookie=1148380143 \
           tag_id=412 }

     Do not forget to program ng_bpf(4) “ipfw” hook with the above expression (see ng_bpf(4) for
     script doing this) and “matched” hook with an empty expression:

         ngctl msg dcbpf: setprogram { thisHook=\"matched\" ifMatch=\"ipfw\" \
           bpf_prog_len=1 bpf_prog=[ { code=6 k=8192 } ] }

     After finishing with netgraph(4) nodes, ipfw(8) rules must be added to enable packet flow:

         ipfw add 100 netgraph 41 tcp from any to any iplen 46
         ipfw add 110 reset tcp from any to any tagged 412

     Note: one should ensure that packets are returned to ipfw after processing inside
     netgraph(4), by setting appropriate sysctl(8) variable:

         sysctl net.inet.ip.fw.one_pass=0

SEE ALSO

     netgraph(4), ng_bpf(4), ng_ipfw(4), ipfw(8), ngctl(8), mbuf_tags(9)

HISTORY

     The ng_tag node type was implemented in FreeBSD 6.2.

AUTHORS

     Vadim Goncharov <vadimnuclight@tpu.ru>

BUGS

     For manipulating any tags with data payload (that is, all tags with non-zero tag_len) one
     should care about non-portable machine-dependent representation of tags on the low level as
     byte stream.  Perhaps this should be done by another program rather than manually.