Provided by: xserver-xorg-video-nouveau_1.0.17-2build1_amd64 bug

NAME

       nouveau - NVIDIA video driver

SYNOPSIS

       Section "Device"
         Identifier "devname"
         Driver "nouveau"
         ...
       EndSection

DESCRIPTION

       nouveau is an Xorg driver for NVIDIA video cards.  The driver supports 2D acceleration and
       provides support for the following  framebuffer  depths:  (15,)  16   and  24.   TrueColor
       visuals are supported for these depths.

SUPPORTED HARDWARE

       The  nouveau  driver  supports PCI, PCI-Express and AGP video cards based on the following
       NVIDIA chips:

       RIVA TNT              NV4

       RIVA TNT2             NV5

       GeForce 256, QUADRO   NV10

       GeForce2, QUADRO2     NV11 & NV15

       GeForce3, QUADRO DCC  NV20

       nForce, nForce2       NV1A, NV1F

       GeForce4, QUADRO4     NV17, NV18, NV25, NV28

       GeForce FX, QUADRO FX NV30, NV31, NV34, NV35, NV36, NV37, NV38

       GeForce 6XXX          NV40, NV41, NV43, NV44, NV45, C51, MCP61

       GeForce 7XXX          G70, G71, G72, G73, MCP67, MCP68, MCP73

       GeForce 8XXX, 9XXX, 2XX, 3XX
                             G80, G84, G86, G92, G94, G96, G98, G200, GT215, GT216, GT218, MCP77,
                             MCP79, MCP89

       GeForce 4XX, 5XX      GF100, GF104, GF106, GF108, GF110, GF114, GF116, GF117, GF119

       GeForce 6XX, 7XX      GK104, GK106, GK107, GK110, GK208

       GeForce GTX 750       GM107, GM108

       GeForce GTX 9XX       GM200, GM204, GM206

       GeForce GTX 10XX      GP102, GP104, GP106, GP107, GP108

CONFIGURATION DETAILS

       Please  refer to xorg.conf(5) for general configuration details.  This section only covers
       configuration details specific to this driver.

       The driver auto-detects the chipset type and the amount of video memory  present  for  all
       chips.

       The following driver Options are supported:

       Option "HWCursor" "boolean"
              Enable or disable the HW cursor.  Default: on.

       Option "AccelMethod" "string"
              Specify the acceleration method. One of "none", or "exa". Default: exa.

       Option "NoAccel" "boolean"
              Disable or enable acceleration.  Default: acceleration is enabled.

       Option "ShadowFB" "boolean"
              Enable or disable use of the shadow framebuffer layer.  Default: off.

       Option "WrappedFB" "boolean"
              Enable  or  disable  wfb, only affects nv50+. Useful for some legacy configurations
              where high rendering latency is perceived.  Default: wfb is disabled.

       Option "GLXVBlank" "boolean"
              Synchronize GLX clients to VBlank. Useful where tearing is a  problem,  harmful  if
              the GPU isn't fast enough to keep up with the monitor refresh rate. Default: on.

       Option "ZaphodHeads" "string"
              Specify  the  randr  output(s)  to  use  with  zaphod  mode for a particular driver
              instance.  If you use this option you most use this option for all instances of the
              driver.
              For  example: Option "ZaphodHeads" "LVDS,VGA-0" will assign xrandr outputs LVDS and
              VGA-0 to this instance of the driver.

       Option "PageFlip" "boolean"
              Enable DRI2 page flipping. Default: on.

       Option "SwapLimit" "integer"
              Set maximum allowed number of pending OpenGL double-buffer  swaps  for  a  drawable
              before a client is blocked.
              A  value  of 1 corresponds to double-buffering. A value of 2 corresponds to triple-
              buffering. Higher values may allow higher framerate,  but  also  increase  lag  for
              interactive  applications,  e.g.,  games.  Nouveau  currently  reliably  supports a
              maximum value of 2 on XOrg 1.12+. A maximum setting of  2  on  older  x-servers  is
              allowed,   but   it   will  break  conformance  with  the  OpenML  OML_sync_control
              specification  and  will  cause  failure  of  software  that  relies   on   correct
              presentation timing behaviour as defined in that specification.
              Default: 1.

       Option "DRI" "integer"
              Define  the  maximum  level  of  DRI  to  enable.  Valid  values  are  2 or 3.  exa
              acceleration will honor the maximum level if it is supported.  Default: 2.

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7)

AUTHORS

       Authors include: David McKay, Jarno Paananen, Chas Inman, Dave Schmenk, Mark Vojkovich

COPYRIGHT

       NOTICE TO USER:   The source code  is copyrighted  under   U.S.  and  international  laws.
       Users  and possessors of this source code are hereby granted a nonexclusive,  royalty-free
       copyright license to use this code in individual and commercial software.

       Any use of this source code must include,  in the user documentation and internal comments
       to the code,  notices to the end user as follows:

       Copyright 1993-2003 NVIDIA, Corporation.  All rights reserved.

       NVIDIA,  CORPORATION  MAKES  NO REPRESENTATION ABOUT THE SUITABILITY OF  THIS SOURCE  CODE
       FOR ANY PURPOSE.  IT IS  PROVIDED  "AS IS" WITHOUT EXPRESS  OR  IMPLIED  WARRANTY  OF  ANY
       KIND.   NVIDIA,  CORPORATION  DISCLAIMS  ALL WARRANTIES  WITH REGARD  TO THIS SOURCE CODE,
       INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS   FOR  A
       PARTICULAR  PURPOSE.    IN  NO EVENT SHALL NVIDIA, CORPORATION  BE LIABLE FOR ANY SPECIAL,
       INDIRECT,  INCIDENTAL, OR CONSEQUENTIAL DAMAGES,  OR  ANY  DAMAGES   WHATSOEVER  RESULTING
       FROM LOSS OF USE,  DATA OR PROFITS,  WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
       TORTIOUS ACTION,  ARISING OUT OF OR IN CONNECTION WITH THE  USE  OR  PERFORMANCE  OF  THIS
       SOURCE CODE.

       U.S. Government  End  Users.   This source code  is a "commercial item,"  as that  term is
       defined at  48 C.F.R. 2.101 (OCT 1995), consisting  of  "commercial   computer   software"
       and   "commercial  computer   software   documentation,"   as such  terms  are  used in 48
       C.F.R. 12.212 (SEPT 1995)  and is provided to the U.S. Government only  as   a  commercial
       end  item.    Consistent  with   48  C.F.R.   12.212  and   48  C.F.R.  227.7202-1 through
       227.7202-4 (JUNE 1995), all U.S. Government End Users  acquire the source code  with  only
       those rights set forth herein.