Provided by: dirvish_1.2.1-2.1_all bug

NAME

       dirvish.conf - dirvish configuration file.

DESCRIPTION

       The dirvish.conf file provides configuration information and default values for dirvish.

       The file format is fairly simple.  Each option requires either a single-value or a list of
       values and unless otherwise indicated must be specified according to  its  expected  type.
       Single  value options are specified by lines of the form option: value.  Options expecting
       list must be specified in a multi-line format as shown here  where  the  lines  specifying
       values are indented by any kind of whitespace even if only one value is being specified.

            option:
                 value1
                 value2
                 .
                 .
                 .
                 valueN
         Each  value  must  be  provided on its own line.  Any leading and trailing whitespace is
       discarded.  Options whose names with an initial capital (ex: Foo) are discarded by dirvish
       itself but may be used by support utilities.  Blank lines are ignored.

       While  this  simplistic  format  may  allow  for  configuration errors it allows arbitrary
       options to be declared that custom support scripts could use.

       A # introduces a comment to the end of the line.

       On  startup  the  dirvish  utilities  will  first  load  a   master   dirvish.conf   file.
       /etc/dirvish.conf  will be tried first but if not present /etc/dirvish/master.conf will be
       tried.

       During installation dirvish may have been configured expect the system-wide  configuration
       files in some location other than /etc/dirvish.

       Multiple configuration files will be loaded by the --config, --vault and --branch command-
       line options as well as the config: and  client:  configuration  parameters.   To  prevent
       looping each configuration file can only be loaded once.

DIRVISH OPTIONS

       Like  the  command  line  each option may be specified any number of times.  Those options
       that expect lists will accumulate all of their arguments and for single value options each
       specification will override the ones before.

       Boolean  values  need to specified as 1 or 0 or may be specified using SET or UNSET.  Some
       Boolean values are set by default and must be explicitly unset if unwanted.

       Each option is marked here with one of (B) for Boolean, (S) single value, (L) list or  (0)
       other.

       SET option option ... (O)

       UNSET option option ... (O)
              Set or unset one or more boolean options.

              NOTE: The SET and UNSET directives do not use colons <:>.

       RESET option (O)
              Reset a list option so that it contains no values.

              This may be used to start specification of the option.

              NOTE: The RESET directive does not use a colon <:>.

       bank: (L)
              Specify paths to directories containing vaults.

              A  bank is a directory containing one or more vaults.  The system supports multiple
              banks so that filesystem mount-points can be managed more effectively.

              When a vault is specified the banks will be searched in list order until the  vault
              is  found.   This  way vaults can be moved between banks or added without having to
              update a master index.

              Multiple bank: values will accumulate.

       branch: branch_name (S)
              Specify a branch to use.

              A branch is a sequence of images.

              This also specifies a default value for reference:.

              Setting this in a config file may cause the command line option to  be  overridden.
              Use branch-default: instead.

       branch-default: branch_name (S)
              Specify a default branch to use.

       client: [username@]client_name (S)
              specify a client to back up.

              Setting  this  to  the same value as hostname will cause dirvish to do a local copy
              and stay off the network.  This automatically invokes whole-file.

              The   first   time   this   parameter   is    set    /etc/dirvish/client_name    or
              /etc/dirvish/client_name.conf will be loaded.

       checksum: (B)
              Force  the  checksum  comparison  of  file  contents  even  when the inode fails to
              indicate a change has occurred.

              Default value: 0

       config: filename (S)
              Load configuration file.

              Similar to #include, filename or filename.conf will be loaded immediately.

              If filename is a relative path it will be looked for in  the  vault  and  then  the
              system-wide configuration directories.

       devices: (B)
              If this is unset device special files will be excluded from backups.

              This  may  need  to  be unset when doing backups of where the client OS uses device
              numbers or types unsupported by the server OSs or  where  the  presence  of  device
              nodes in the vault present a security issue.

       exclude: (L)
              Specify a filename patterns to exclude.

              Patterns are based on shell glob with some enhancements.

              See rsync(1) for more details.

              Multiple exclude: values will accumulate.

       file-exclude: filename (S)
              Load a set of patterns from a file.

              If  filename  is  a  relative  path it will be looked for in the vault and then the
              system-wide configuration directories.

       expire: expire_date (S)
              Specify a time for the image to expire.

              This does not actually expire anything.  What it does do is add an  Expire:  option
              to  the  image  summary file with the absolute time appended so that dirvish-expire
              can automate old image removal.

              Setting this in a config file may cause the command line option to  be  overridden.
              Use expire-rule: and expire-default: instead.

              See Time::ParseDate(3pm) for more details.

       expire-default: expire_date (S)
              Specify a default expiration time.

              This  value  will  only be used if expire is not set and expire-rule doesn't have a
              match.

       expire-rule: (L)
              specify rules for expiration.

              Rules are specified similar to crontab or in Time::Periodformat.

              See EXPIRE RULES for more details.

              Multiple expire-rule: values will accumulate.

       image: image_name (S)
              Specify a name for the image.

              image_name is passed through POSIX::strftime

              Setting this in a config file may cause the command line option to  be  overridden.
              Use image-default: instead.

              See strftime(3) for more details.

       image-default: image_name (S)
              Set the default image_name.

              This value will only be used if image: is not set.

       image-perm: octal_mode (S)
              Set the permissions for the image.

              While  the  image  is  being  created the image directory permissions will be 0700.
              After completion it will be changed to octal_mode or 0755.

              See chmod(1) and umask(2) for more details.

       image-time: parsedate_expression (S)
              Time to use when creating the image name.

              If an absolute time without a date is provided it will be forced into the past.

              If this isn't set the current time will be used.

              See Time::ParseDate(3pm) for more details.

       image-temp: dirname (S)
              Temporary directory name to use for new image.  This  allows  you  to  have  images
              created  with  the  same  directory  name  each run so that automatic processes can
              access them.

              The next time an image is made on the branch this option will cause  the  directory
              to be renamed to its official name.

       index: none|text|gzip|bzip2 (S)
              Create an index file listing all files in the image.

              The  index  file  will  be  created  using find -ls so the list will be in the same
              format as ls-dils with paths converted to reflect the source location.

              If index is set to bzip2 or gzip or a path to one the index file will be compressed
              accordingly.

              This  index  will  be  used  by  dirvish-locate  to  locate versions of files.  See
              dirvish-locate(8) for more details.

       init: (B)
              Create an initial image.

              Turning this on will prevent backups from being incremental.

       log: text|gzip|bzip2 (S)
              Specify format for the image log file.

              If log is set to bzip2 or gzip or a path to one the log  file  will  be  compressed
              accordingly.

       meta-perm: octal-mode (S)
              Set the permissions for the image meta-data files.

              If  this  value  is set the permissions of the meta-data files in the image will be
              changed after the image is created.  Otherwise the active umask will prevail.

              SECURITY NOTE: The log, index, and error files contain lists of files.  It  may  be
              possible  that  filenames  themselves may be or contain confidential information so
              uncontrolled access may constitute a security weakness.

              See chmod(1) and umask(2) for more details.

       numeric-ids: (B)
              Use numeric uid/gid values instead of  looking  up  user/group  names  for  setting
              permissions.

              See rsync(1) for more details.

              Default value: 1

       password-file: filepath (S)
              Specify  file  containing  password  for  connection  to  an rsync daemon on backup
              client.

              This is not useful for remote shell passwords.

              See --password-file in rsync(1) for more details.

       permissions: (B)
              Preserve file permissions.  If this is unset permissions will  not  be  checked  or
              preserved.

              With  rsync  version 2.5.6 not preserving permissions will break the linking.  Only
              unset this if you are running a later version of rsync.

              See rsync(1) for more details.

              Default value: 1

       pre-server: shell_command (S)

       pre-client: shell_command (S)

       post-client: shell_command (S)

       post-server: shell_command (S)
              Execute shell_command on client or server before or after making backup.

              The client commands are run on the client system using  the  remote  shell  command
              (see the rsh: parameter).

              The  order of execution is pre-server, pre-client, rsync, post-client, post-server.
              The shell_command will be passed through strftime(3) to allow date  strings  to  be
              expanded.

              Each  pre  or  post  shell_commands  will  be  run with these environment variables
              DIRVISH_SERVER, DIRVISH_CLIENT, DIRVISH_SRC, DIRVISH_DEST  and  DIRVISH_IMAGE  set.
              The  current  directory  will  be DIRVISH_SRC on the client and DIRVISH_DEST on the
              server.  If there are any exclude patterns defined  the  pre-server  shell  command
              will  also have the exclude file's path in DIRVISH_EXCLUDE so it may read or modify
              the exlude list.

              STDOUT from each shell_command will be written to the image log file.

              The exit status of each script will be checked.  Non-zero values will be recognised
              as  failure  and  logged.   Failure of the pre-server command will halt all further
              action.  Failure of the pre-client command will prevent the rsync from running  and
              the post-server command, if any, will be run.

              Post  shell_commands  will also have DIRVISH_STATUS set to success, warning, error,
              or fatal error.

              This is useful for multiple things.  The client shell_commands can be used to  stop
              and  start  services  so  their  files  can  be  backed  up  safely.  You might use
              post-server: to schedule replication or a tape backup of the new image.   Use  your
              imagination.

       reference: branch_name|image_name (S)
              Specify an existing image or a branch from which to create the new image.

              If  a  branch_name is specified, the last existing image from its history file will
              be used.  A branch will take precedence over an image of the same name.

              If this isn't specified the branch name will be used as a default value.

       rsh: command (S)
              Remote shell utility.

              This can be used to specify the location of ssh or rsh and/or to  provide  addition
              options for said utility such as -p port for ssh to use an alternate port number.

              If not specified ssh will be used.

              This  remote shell command will be used not only as the default rsync transport but
              also for any pre-client and post-client commands.

       rsync: command (S)
              Path to rsync executable on the server.

       rsync-client: command (S)
              Path to rsync executable on the client.

       rsync-option: (L)
              Specify additional options for the rsync command.

              Only one option per list item is supported.

              This allows you to use rsync features that are not directly supported  by  dirvish.
              Where  dirvish  does  support an rsync feature it is probably better to use the the
              dirvish supplied mechanism for setting it.

              Multiple rsync-option: values will accumulate.

       sparse: (B)
              Try to handle sparse files efficiently so they take up less space in the vault.

              NOTE: Some filesystem types may have problems seeking over null regions.

       speed-limit: Mbps (S)
              Specify a maximum transfer rate.

              This allows you to limit the network bandwidth consumed.  The value is specified in
              approximate   Mega-bits   per   second   which   correlates  to  network  transport
              specifications.  An adaptive algorithm is used so the actual  bandwidth  usage  may
              exceed Mbps occasionally.

              See --bwlimit in rsync(1) for more details.

       stats: (B)
              Have rsync report transfer statistics.

              See rsync(1) for more details.

              Default value: 1

       summary: short|long (S)
              Specify summary format.

              A  short  summary will only include final used values.  A long summary will include
              all configuration values.

              With long format you custom options in the configuration files will appear  in  the
              summary.

              The default is short.

       tree: path [alias] (S)
              Specify a directory path on the client to backup.

              If  path is prefixed with a colon the transfer will be done from an rsync daemon on
              the client otherwise the transfer will be done through a remote shell process.

              The optional  alias  specifies  the  path  that  should  appear  in  the  index  so
              dirvish-locate  will  report  paths  consistant  with  common usage.  This can help
              reduce confusion when dealing with users unfamiliar with the physical  topology  of
              their network provided files.

       no-run: (B)
              Don't actually do anything.

              Process   all   configuration   files,   options   and   tests   then   produce   a
              summary/configuration file on standard output and exit.

              I can't think why you would do this in a configuration file  but  if  you  want  to
              shoot yourself in the foot, be my guest.

       vault: vault (S)
              Specify the vault to store the image in.

              Although  multiple  vaults  may  share  a  filesystem  a  given  vault  cannot span
              filesystems.  For filesystem purposes the vault is the level of atomicity.

              This will seldom be specified in a configuration file.

       whole-file: (B)
              Transfer whole files instead of just the parts that have changed.

              This may be slightly faster for files that have more changed  than  left  the  same
              such  as  compressed  or  encrypted  files.  In most cases this will be slower when
              transferring over the network but will use less CPU resources.  This will be faster
              if  the  transfers  are not over the network or when the network is faster than the
              destination disk subsystem.

       xdev: (B)
              Do not cross mount-points when traversing the tree on the client.

       zxfer: (B)
              Enable compression on data-transfer.

SCHEDULING OPTIONS

       Dirvish: path (S)
              Location of dirvish executable.

              If not set defaults to dirvish.

       Runall: (L)
              Specify branches to be scheduled for automated backups.  Each value is specified in
              the form
                   vault:branch [image_time]

              If image_time is set here it will be used.

              This  option  can  only be set in the master configuration file and multiple values
              will accumulate.

EXPIRE RULES

       Expire rules is a list of rules used to determine an expiration time for an image.

       The last rule that matches will apply so list order is significant.  This allows rules  to
       be set in client, vault and branch configuration files to override rules set in the master
       configuration file without having to use RESET.  In most cases  it  is  better  to  use  a
       expire-default: value than to define a rule that matches all possible times.

       Each rule has an pattern expression against which the current time is compared followed by
       a date specifier in Time::ParseDate format.  See Time::ParseDate(3pm) for more details.

       A matching rule with an empty/missing date specifier or specifying never will result in no
       expiration.

       The  time  pattern  expression  may  be  in either crontab or in Time::Period format.  See
       crontab(5) and Time::Period(3pm) for more details.

       The crontab formated patterns are converted to Time::Period format so the limitations  and
       extensions  for  the  specification  of option values of Time::Period apply to the crontab
       format as well.  Most notable is that the days of the week are numbered 1-7 for sun-sat so
       0 is not a valid wday but sat
        is.

       Here are two equivalent examples of an expire-rule list.

            expire-default: +5 weeks
            expire-rule:

            #MIN  HR    DOM   MON         DOW   EXPIRE
            *     *     *     *           1     +3 months
            *     *     1-7   *           su    +1 year
            *     *     1-7   1,4,7,10    1     never
            *     10-20 *     *           *     +10 days
       or:
            wd { sun }                          +3 months
            wd { sun } md { 1-7 }               +1 year
            wd { 1 } md { 1-7 } mo { 1,4,7,10 } never
            hr { 10-20 }                        +10 days

       This  describes  is an aggressive retention schedule.  If the nightly backup is made dated
       the 1st Sunday of each quarter it is is kept forever, the 1st Sunday of any other month is
       kept  for  1  year,  all other Sunday's are kept for 3 months, the remaining nightlies are
       kept for 5 weeks.  In addition, if the backup is made between 10AM and 8PM it will  expire
       after  10 days.  This would be appropriate for someone with a huge backup server who is so
       paranoid he makes two backups per day.  The other possibility for the hour spec  would  be
       for ad-hoc special backups to have a default that differs from the normal dailies.

       It should be noted that all expiration rules will do is to cause dirvish to put an Expire:
       option in the summary file.  The dirvish-expire utility will have to be  run  to  actually
       delete any expired images.

FILES

       /etc/dirvish/master.conf
              alternate master configuration file.

       /etc/dirvish.conf
              master configuration file.

       /etc/dirvish/client[.conf]
              client configuration file.

       bank/vault/dirvish/default[.conf]
              default vault configuration file.

       bank/vault/dirvish/branch[.conf]
              branch configuration file.

       bank/vault/dirvish/branch.hist
              branch history file.

       bank/vault/image/summary
              image creation summary.

       bank/vault/image/log
              image creation log.

       bank/vault/image/tree
              actual image of source directory tree.

       bank/vault/image/rsync_error
              Error output from rsync if errors or warnings were detected.

SEE ALSO

       dirvish(8)
       dirvish-expire(8)
       dirvish-runall(8)
       dirvish-locate(8)
       ssh(1),
       rsync(1)
       Time::ParseDate(3pm)
       strftime(3)

AUTHOR

       Dirvish was created by J.W. Schultz of Pegasystems Technologies.

BUGS

       Rsync  version 2.5.6 has a bug so that unsetting the perms option will not disable testing
       for permissions.  Disabling perms will break image linking.

       Options set in configuration files will override command line options that have  been  set
       before  the  file  is  read.  This behaviour while consistent may confuse users.  For this
       reason the more frequently used command line options have options paired  with  a  default
       option so the order of specification will be more forgiving.  It is recommended that where
       such default options exist in configuration  files  they  should  be  preferred  over  the
       primary option.

       It  is  possible to specify almost any command line option as a option.  Some of them just
       don't make sense to use here.

                                                                                  DIRVISH.CONF(5)