NAME

       firehol-blacklist - set up a unidirectional or bidirectional blacklist

SYNOPSIS

       {  blacklist | blacklist4 | blacklist6 } [ type ] [ inface device ] [ log “text” ] [ nolog
       ] [ connlog “text” ] [ loglimit “text” ] [ accounting accounting_name  ]  ip...  [  except
       rule-params [or rule-params [or ... ]]]

DESCRIPTION

       The  blacklist  helper  command creates a blacklist for the ip list given (which can be in
       quotes or not).

       If the type full or all is supplied  (or  no  type  at  all),  a  bidirectional  stateless
       blacklist  will  be  generated.   The  firewall  will  REJECT  all traffic going to the IP
       addresses and DROP all traffic coming from them.

       If the type stateful is supplied, a bidirectional stateful blacklist  will  be  generated.
       The firewall will REJECT all traffic going to the IP addresses and DROP all traffic coming
       from them.

       The differences between full and stateful are:

       1. stateful is resource efficient, since only the packets that  initiate  connections  are
          examined.  Established connections will never be re-tested against the blacklist.

       2. when  using  full and an ipset is updated to match the IP of an established connection,
          this established connection will immediately be blocked too.

       If the type input or him, her, it, this, these  is  supplied,  a  unidirectional  stateful
       blacklist will be generated.  Connections can be established to such IP addresses, but the
       IP addresses will not be able to connect to the firewall or hosts protected by it.

       Using log (log every packet), connlog (log connections once),  or  loglimit  (log  packets
       according  to  global  throttling settings), the text will be logged when matching packets
       are found.

       Using nolog will disable logging for this rule.

       Using inface, the blacklist will be created on the interface device  only  (this  includes
       forwarded traffic).

       accounting will update the NFACCT accounting with the name given.

       If  the  keyword  except is found, then all the parameters following it are rules to match
       packets that should excluded from the  blacklist  (i.e. they  are  a  whitelist  for  this
       blacklist).  See firehol-params(5) for more details.

       Blacklists must be declared before the first router or interface.

       IP Lists for abuse, malware, attacks, proxies, anonymizers, etc can be downloaded with the
       contrib/update-ipsets.sh script.  Information about the supported IP Lists can be found at
       FireHOL IP Lists (http://iplists.firehol.org/)

EXAMPLES

              blacklist full 192.0.2.1 192.0.2.2
              blacklist input "192.0.2.3 192.0.2.4"
              blacklist full inface eth0 log "BADGUY" 192.0.1.1 192.0.1.2

SEE ALSO

       • firehol(1) - FireHOL program

       • firehol.conf(5) - FireHOL configuration

       • FireHOL Website (http://firehol.org/)

       • FireHOL Online PDF Manual (http://firehol.org/firehol-manual.pdf)

       • FireHOL Online Documentation (http://firehol.org/documentation/)

       • FireHOL IP Lists (http://iplists.firehol.org/)

AUTHORS

       FireHOL Team.