Provided by: gammu-smsd_1.42.0-5_amd64 
NAME
gammu-smsdrc - gammu-smsd(1) configuration file
DESCRIPTION
gammu-smsd reads configuration from a config file. It's location can be specified on
command line, otherwise default path /etc/gammu-smsdrc is used.
This file use ini file syntax, see ini.
Configuration file of gammu-smsd consists of at least two sections - [gammu] and [smsd].
For gammu-smsd-sql you can also use [sql] and [tables].
The [gammu] section is configuration of a phone connection and is same as described in
gammurc with the only exception that LogFile is ignored and common logging for gammu
library and SMS daemon is used. However the LogFormat directive still configures how much
messages gammu emits.
[smsd] The [smsd] section configures SMS daemon itself, which are described in following
subsections. First general parameters of SMS daemon are listed and then specific
parameters for storage backends.
[include_numbers]
List of numbers from which accept messages, see Message filtering.
[exclude_numbers]
List of numbers from which reject messages, see Message filtering.
[include_smsc]
List of SMSC numbers from which accept messages, see Message filtering.
[exclude_smsc]
List of SMSC numbers from which reject messages, see Message filtering.
[sql] Configure SQL queries used by gammu-smsd-sql, you usually don't have to modify
them.
SEE ALSO:
Configurable queries
[tables]
Configure SQL table names used by gammu-smsd-sql, you usually don't have to modify
them.
SEE ALSO:
Configurable tables
GENERAL PARAMETERS OF SMS DAEMON
Service
SMSD service to use, one of following choices:
FILES Stores messages in files, see gammu-smsd-files for details.
NULL Does not store messages at all, see gammu-smsd-null for details.
SQL Stores messages in SQL database, see gammu-smsd-sql for details, choose
database type to use by Driver.
New in version 1.28.93.
MYSQL Deprecated since version 1.28.93: Use Service = SQL and Driver =
native_mysql instead.
Compatibility option for older configuration files, stores messages in MySQL
database, see gammu-smsd-mysql for details.
PGSQL Deprecated since version 1.28.93: Use Service = SQL and Driver =
native_pgsql instead.
Compatibility option for older configuration files, stores messages in
PostgreSQL database, see gammu-smsd-pgsql for details.
DBI Deprecated since version 1.28.93: Use Service = SQL and Driver = DBI driver
instead.
Compatibility option for older configuration files, stores messages in any
database supported by libdbi, see gammu-smsd-dbi for details.
NOTE:
Availability of backends depends on platform and compile time configuration.
PIN PIN for SIM card. This is optional, but you should set it if your phone after power
on requires PIN.
NetworkCode
Network personalisation password. This is optional, but some phones require it
after power on.
PhoneCode
Phone lock password. This is optional, but some phones require it after power on.
LogFile
File where SMSD actions are being logged. You can also use special value syslog
which will send all messages to syslog daemon. On Windows another special value
eventlog exists, which will send logs to Windows Event Log.
If you run SMSD as a system daemon (or service), it is recommended to use absolute
path to log file as startup directory might be different than you expect.
Default is to provide no logging.
NOTE:
For logging to Windows Event Log, it is recommended to install Event Log source
by invoking gammu-smsd -e (this is automatically done during installation of
Gammu).
LogFacility
Facility to use on logging backends which support it (currently only syslog). One
of following chouces:
• DAEMON (default)
• USER
• LOCAL0
• LOCAL1
• LOCAL2
• LOCAL3
• LOCAL4
• LOCAL5
• LOCAL6
• LOCAL7
New in version 1.30.91.
DebugLevel
Debug level for SMSD. The integer value should be sum of all flags you want to
enable.
1 enables basic debugging information
2 enables logging of SQL queries of service backends
4 enables logging of gammu debug information
Generally to get as much debug information as possible, use 255.
Default is 0, what should mean no extra information.
CommTimeout
How many seconds should SMSD wait after there is no message in outbox before
scanning it again.
Default is 30.
SendTimeout
Shows how many seconds SMSD should wait for network answer during sending sms. If
nothing happen during this time, sms will be resent.
Default is 30.
MaxRetries
How many times will SMSD try to resend message if sending fails. This is tracked
per message and currently supported only with SQL backends.
Default is 1.
RetryTimeout
How long to wait before resending failed message (needs to be enabled by
MaxRetries).
Is used in update_retries.
Default is 600.
ReceiveFrequency
The number of seconds between testing for received SMSes, when the phone is busy
sending SMSes. Normally a test for received SMSes is done every CommTimeout seconds
and after each sent SMS.
Default is 15.
StatusFrequency
The number of seconds between refreshing phone status (battery, signal) stored in
shared memory and possibly in service backends. Use 0 to disable.
You might want to increase this for higher throughput.
Default is 60.
LoopSleep
The number of seconds how long will SMSD sleep before checking for some activity.
Please note that setting this to higher value than 1 will have effects to other
time based configurations, because they will be effectively rounded to multiply of
this value.
Setting this to 0 disables sleeping. Please note this might cause Gammu to consume
quite a lot of CPU power as it will effectively do busy loop.
This sleep is utilized only if the main loop (sending and receiving messages) takes
less than defined time. For example if you set LoopSleep to 5 seconds and sending
messages take 10 seconds, no sleep will be done in the iteration which is sending
messages. Also the sleep time is lowered by the already processed time.
Default is 1.
MultipartTimeout
The number of seconds how long will SMSD wait for all parts of multipart message.
If all parts won't arrive in time, parts will be processed as separate messages.
Default is 600 (10 minutes).
CheckSecurity
Whether to check if phone wants to enter PIN.
Default is 1 (enabled).
HangupCalls
New in version 1.34.0.
Whether to automatically hangup any incoming calls.
Default is 0 (disabled).
CheckBattery
Whether to check phone battery state periodically.
Default is 1 (enabled).
CheckSignal
Whether to check signal level periodically.
Default is 1 (enabled).
CheckNetwork
New in version 1.37.90.
Whether to check network status periodically.
If phone is reported to be not on the network, SMSD tries to power it on.
Default is 1 (enabled).
ResetFrequency
The number of seconds between performing a preventive soft reset in order to
minimize the cases of hanging phones e.g. Nokia 5110 will sometimes freeze to a
state when only after unmounting the battery the phone will be functional again.
Default is 0 (not used).
HardResetFrequency
New in version 1.28.92.
WARNING:
For some phones hard reset means deleting all data in it. Use ResetFrequency
instead, unless you know what you are doing.
The number of seconds between performing a preventive hard reset in order to
minimize the cases of hanging phones.
Default is 0 (not used).
DeliveryReport
Whether delivery reports should be used, one of no, log, sms.
log one line log entry,
sms store in inbox as a received SMS
no no delivery reports
Default is no.
DeliveryReportDelay
Delay in seconds how long is still delivery report considered valid. This depends
on brokenness of your network (delivery report should have same timestamp as sent
message). Increase this if delivery reports are not paired with sent messages.
Default is 600 (10 minutes).
PhoneID
String with info about phone used for sending/receiving. This can be useful if you
want to run several SMS daemons (see Multiple modems).
When you set PhoneID, all messages (including injected ones) will be marked by this
string (stored as SenderID in the database) and it allows more SMS daemons to share
a single database.
SMSD daemon will in such case send outbox messages only with matching or empty
SenderID.
This option has actually no effect with gammu-smsd-files.
SMSC New in version 1.36.2.
SMSC number to use for sending messages if not specified in the message (see
options of gammu-smsd-inject).
In most cases you don't need this settings as Gammu tries to read correct SMSC from
phone, but sometimes this fails (try gammu getsmsc).
RunOnReceive
Executes a program after receiving message.
This parameter is executed through shell, so you might need to escape some special
characters and you can include any number of parameters. Additionally parameters
with identifiers of received messages are appended to the command line. The
identifiers depend on used service backend, typically it is ID of inserted row for
database backends or file name for file based backends.
Gammu SMSD waits for the script to terminate. If you make some time consuming
there, it will make SMSD not receive new messages. However to limit breakage from
this situation, the waiting time is limited to two minutes. After this time SMSD
will continue in normal operation and might execute your script again.
The process has available lot of information about received message in environment,
check gammu-smsd-run for more details.
RunOnFailure
New in version 1.28.93.
Executes a program on failure.
This can be used to proactively react on some failures or to interactively detect
failure of sending message.
The program will receive optional parameter, which can currently be either INIT
(meaning failure during phone initialization) or message ID, which would indicate
error while sending the message.
NOTE:
The environment with message (as is in RunOnReceive) is not passed to the
command.
RunOnSent
New in version 1.36.4.
Executes a program after sending message.
The program will receive optional parameter a message ID and environment with
message details as described in gammu-smsd-run.
RunOnIncomingCall
New in version 1.38.5.
Executes a program after cancelling incoming call.
The program will receive a parameter with a phone number of the call. This
requires HangupCalls to be enabled.
IncludeNumbersFile
File with list of numbers which are accepted by SMSD. The file contains one number
per line, blank lines are ignored. The file is read at startup and is reread only
when configuration is being reread. See Message filtering for details.
ExcludeNumbersFile
File with list of numbers which are not accepted by SMSD. The file contains one
number per line, blank lines are ignored. The file is read at startup and is reread
only when configuration is being reread. See Message filtering for details.
IncludeSMSCFile
File with list of SMSC numbers which are accepted by SMSD. The file contains one
number per line, blank lines are ignored. The file is read at startup and is reread
only when configuration is being reread. See Message filtering for details.
ExcludeSMSCFile
File with list of SMSC numbers which are not accepted by SMSD. The file contains
one number per line, blank lines are ignored. The file is read at startup and is
reread only when configuration is being reread. See Message filtering for details.
BackendRetries
How many times will SMSD backend retry operation.
The implementation on different backends is different, for database backends it
generally means how many times it will try to reconnect to the server.
Default is 10.
Send New in version 1.28.91.
Whether to enable sending of messages.
Default is True.
Receive
New in version 1.28.91.
Whether to enable receiving of messages.
Default is True.
DATABASE BACKENDS OPTIONS
All DBI, ODBC, MYSQL and PGSQL backends (see gammu-smsd-mysql, gammu-smsd-odbc,
gammu-smsd-pgsql, gammu-smsd-dbi for their documentation) supports same options for
configuring connection to a database:
User User name used for connection to a database.
Password
Password used for connection to a database.
Host Database server address. It can also contain port or socket path after semicolon,
for example localhost:/path/to/socket or 192.168.1.1:8000.
For ODBC this is used as Data source name.
NOTE:
Some database servers differentiate usage of localhost (to use local socket) and
127.0.0.1 (to use locat TCP/IP connection). Please make sure your SMSD settings
match the database server ones.
New in version 1.28.92.
PC Deprecated since version 1.28.92: Please use Host instead.
Synonym for Host, kept for backwards compatibility.
Database
Name of database (or schema) to use and where SMSD can find it's tables.
Please note that you should create tables in this database before using gammu-smsd.
SQL files for creating needed tables are included in documentation for individual
database backends: gammu-smsd-mysql, gammu-smsd-odbc, gammu-smsd-pgsql,
gammu-smsd-dbi
SkipSMSCNumber
When you send sms from some SMS centers you can have delivery reports from other
SMSC number. You can set here number of this SMSC used by you and Gammu will not
check it's number during assigning reports to sent SMS.
Driver SQL driver to use, Gammu supports several native drivers and generic interface
using ODBC and DBI. Availability of the backends depends on compile time options.
Available drivers:
odbc
Connects to the database using ODBC, see gammu-smsd-odbc.
native_mysql
Stores messages in MySQL database, see gammu-smsd-mysql for details.
native_pgsql
Stores messages in PostgreSQL database, see gammu-smsd-pgsql for details.
db2, firebird, freetds, ingres, msql, mysql, oracle, pgsql, sqlite, sqlite3
Stores messages using DBI library in given backend. You need to have installed
appropriate DBI driver to make it work. See gammu-smsd-dbi for details.
SQL SQL dialect to use. This is specially useful with gammu-smsd-odbc where SMSD does
not know which server it is actually talking to.
Possible values:
• mysql - MySQL
• pgsql - PostgreSQL
• sqlite - SQLite
• mssql - Microsoft SQL Server
• sybase - Sybase
• access - Microsoft Access
• oracle - Oracle
• odbc - Generic ODBC
New in version 1.28.93.
SEE ALSO:
You can also completely customize SQL queries used as described in SQL Queries.
DriversPath
Path, where DBI drivers are stored, this usually does not have to be set if you
have properly installed drivers.
DBDir Database directory for some (currently only sqlite) DBI drivers. Set here path
where sqlite database files are stored.
Files backend options
The FILES backend accepts following configuration options. See gammu-smsd-files for more
detailed service backend description. Please note that all path should contain trailing
path separator (/ on Unix systems):
InboxPath
Where the received SMSes are stored.
Default is current directory.
OutboxPath
Where SMSes to be sent should be placed.
Default is current directory.
SentSMSPath
Where the transmitted SMSes are placed, if same as OutboxPath transmitted messages
are deleted.
Default is to delete transmitted messages.
ErrorSMSPath
Where SMSes with error in transmission is placed.
Default is same as SentSMSPath.
InboxFormat
The format in which the SMS will be stored: detail, unicode, standard.
detail format used for message backup by gammu, see gammu-smsbackup.
unicode
message text stored in unicode (UTF-16)
standard
message text stored in system charset
The standard and unicode settings do not apply for 8-bit messages, which are always
written raw as they are received with extension .bin.
Default is unicode.
NOTE:
In detail format, all message parts are stored into single file, for all others
each message part is saved separately.
OutboxFormat
The format in which messages created by gammu-smsd-inject will be stored, it
accepts same values as InboxFormat.
Default is detail if Gammu is compiled in with backup functions, unicode otherwise.
TransmitFormat
The format for transmitting the SMS: auto, unicode, 7bit.
This option is used only if OutboxFormat is not set to detail. In such case
encoding specified in the message is used (you can specify it to
gammu-smsd-inject).
Default is auto.
MESSAGE FILTERING
SMSD allows one to process only limited subset of incoming messages. You can define
filters for sender number in [include_numbers] and [exclude_numbers] sections or using
IncludeNumbersFile and ExcludeNumbersFile directives.
If [include_numbers] section exists, all values (keys are ignored) from it are used as
allowed phone numbers and no other message is processed. On the other side, in
[exclude_numbers] you can specify numbers which you want to skip.
Lists from both sources are merged together. If there is any number in include list, only
include list is used and only messages in this list are being accepted. If include list is
empty, exclude list can be used to ignore messages from some numbers. If both lists are
empty, all messages are accepted.
Similar filtering rules can be used for SMSC number filtering, they just use different set
of configuration options - [include_smsc] and [exclude_smsc] sections or IncludeSMSCFile
and ExcludeSMSCFile directives.
EXAMPLES
There is more complete example available in Gammu documentation. Please note that for
simplicity following examples do not include [gammu] section, you can look into gammurc
for some examples how it can look like.
Files service
SMSD configuration file for FILES backend could look like:
[smsd]
Service = files
PIN = 1234
LogFile = syslog
InboxPath = /var/spool/sms/inbox/
OutboxPath = /var/spool/sms/outbox/
SentSMSPath = /var/spool/sms/sent/
ErrorSMSPath = /var/spool/sms/error/
MySQL service
If you want to use MYSQL backend, you will need something like this:
[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
DBI service using SQLite
For gammu-smsd-dbi backend, in this particular case SQLite:
[smsd]
Service = sql
Driver = sqlite3
DBDir = /var/lib/sqlite3
Database = smsd.db
ODBC service using MySQL
For gammu-smsd-odbc backend, in this particular case using DSN smsd server:
[smsd]
Service = sql
Driver = odbc
Host = smsd
The DSN definition (in ~/.odbc.ini on UNIX) for using MySQL server would look like:
[smsd]
Description = MySQL
Driver = MySQL
Server = 127.0.0.1
Database = smsd
Port =
Socket =
Option =
Stmt =
[smsdsuse]
Driver = MySQL ODBC 3.51.27r695 Driver
DATABASE = smsd
SERVER = 127.0.0.1
Numbers filtering
Process only messages from 123456 number:
[include_numbers]
number1 = 123456
Do not process messages from evil number 666:
[exclude_numbers]
number1 = 666
Debugging
Enabling debugging:
[smsd]
debuglevel = 255
logfile = smsd.log
Multiple modems
You can run any number of SMSD instances and they can even share same backend database.
For routing the messages, you need to set different PhoneID for each instance and set
SenderID column in outbox table.
Following example shows configuration for two modems, but you can have any number of SMSD
instances. The only limitation is performance of your hardware, especially if all modems
are connected using USB.
Configuration for first SMSD:
[gammu]
device = /dev/ttyACM0
connection = at
[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
PhoneID = first
Configuration for second SMSD:
[gammu]
device = /dev/ttyACM1
connection = at
[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
PhoneID = second
You can then start two separate instances of SMSD:
gammu-smsd -c /path/to/first-smsdrc
gammu-smsd -c /path/to/second-smsdrc
AUTHOR
Michal Čihař <michal@cihar.com>
COPYRIGHT
2009-2015, Michal Čihař <michal@cihar.com>