Provided by: pgbouncer_1.16.1-1ubuntu2_amd64 
NAME
pgbouncer.ini - configuration file for pgbouncer
DESCRIPTION
The configuration file is in “ini” format. Section names are between “[” and ”]”. Lines
starting with “;” or “#” are taken as comments and ignored. The characters “;” and “#”
are not recognized as special when they appear later in the line.
GENERIC SETTINGS
logfile
Specifies the log file. For daemonization (-d), either this or syslog need to be set.
The log file is kept open, so after rotation kill -HUP or on console RELOAD; should be
done. On Windows, the service must be stopped and started.
Note that setting logfile does not by itself turn off logging to stderr. Use the command-
line option -q or -d for that.
Default: not set
pidfile
Specifies the PID file. Without pidfile set, daemonization (-d) is not allowed.
Default: not set
listen_addr
Specifies a list of addresses where to listen for TCP connections. You may also use *
meaning “listen on all addresses”. When not set, only Unix socket connections are
accepted.
Addresses can be specified numerically (IPv4/IPv6) or by name.
Default: not set
listen_port
Which port to listen on. Applies to both TCP and Unix sockets.
Default: 6432
unix_socket_dir
Specifies location for Unix sockets. Applies to both listening socket and server
connections. If set to an empty string, Unix sockets are disabled. A value that starts
with @ specifies that a Unix socket in the abstract namespace should be created (currently
supported on Linux and Windows).
For online reboot (-R) to work, a Unix socket needs to be configured, and it needs to be
in the file-system namespace.
Default: /tmp (empty on Windows)
unix_socket_mode
File system mode for Unix socket. Ignored for sockets in the abstract namespace. Not
supported on Windows.
Default: 0777
unix_socket_group
Group name to use for Unix socket. Ignored for sockets in the abstract namespace. Not
supported on Windows.
Default: not set
user
If set, specifies the Unix user to change to after startup. Works only if PgBouncer is
started as root or if it’s already running as given user. Not supported on Windows.
Default: not set
auth_file
The name of the file to load user names and passwords from. See section Authentication
file format below about details.
Default: not set
auth_hba_file
HBA configuration file to use when auth_type is hba.
Default: not set
auth_type
How to authenticate users.
pam PAM is used to authenticate users, auth_file is ignored. This method is not
compatible with databases using the auth_user option. The service name reported to
PAM is “pgbouncer”. pam is not supported in the HBA configuration file.
hba The actual authentication type is loaded from auth_hba_file. This allows different
authentication methods for different access paths, for example: connections over
Unix socket use the peer auth method, connections over TCP must use TLS.
cert Client must connect over TLS connection with a valid client certificate. The user
name is then taken from the CommonName field from the certificate.
md5 Use MD5-based password check. This is the default authentication method.
auth_file may contain both MD5-encrypted and plain-text passwords. If md5 is
configured and a user has a SCRAM secret, then SCRAM authentication is used
automatically instead.
scram-sha-256
Use password check with SCRAM-SHA-256. auth_file has to contain SCRAM secrets or
plain-text passwords.
plain The clear-text password is sent over the wire. Deprecated.
trust No authentication is done. The user name must still exist in auth_file.
any Like the trust method, but the user name given is ignored. Requires that all
databases are configured to log in as a specific user. Additionally, the console
database allows any user to log in as admin.
auth_query
Query to load user’s password from database.
Direct access to pg_shadow requires admin rights. It’s preferable to use a non-superuser
that calls a SECURITY DEFINER function instead.
Note that the query is run inside the target database. So if a function is used, it needs
to be installed into each database.
Default: SELECT usename, passwd FROM pg_shadow WHERE usename=$1
auth_user
If auth_user is set, then any user not specified in auth_file will be queried through the
auth_query query from pg_shadow in the database, using auth_user. The password of
auth_user will be taken from auth_file. (If the auth_user does not require a password
then it does not need to be defined in auth_file.)
Direct access to pg_shadow requires admin rights. It’s preferable to use a non-superuser
that calls a SECURITY DEFINER function instead.
Default: not set
pool_mode
Specifies when a server connection can be reused by other clients.
session
Server is released back to pool after client disconnects. Default.
transaction
Server is released back to pool after transaction finishes.
statement
Server is released back to pool after query finishes. Transactions spanning
multiple statements are disallowed in this mode.
max_client_conn
Maximum number of client connections allowed. When increased then the file descriptor
limits should also be increased. Note that the actual number of file descriptors used is
more than max_client_conn. The theoretical maximum used is:
max_client_conn + (max pool_size * total databases * total users)
if each user connects under its own user name to the server. If a database user is
specified in the connection string (all users connect under the same user name), the
theoretical maximum is:
max_client_conn + (max pool_size * total databases)
The theoretical maximum should be never reached, unless somebody deliberately crafts a
special load for it. Still, it means you should set the number of file descriptors to a
safely high number.
Search for ulimit in your favorite shell man page. Note: ulimit does not apply in a
Windows environment.
Default: 100
default_pool_size
How many server connections to allow per user/database pair. Can be overridden in the
per-database configuration.
Default: 20
min_pool_size
Add more server connections to pool if below this number. Improves behavior when usual
load comes suddenly back after period of total inactivity. The value is effectively
capped at the pool size.
Default: 0 (disabled)
reserve_pool_size
How many additional connections to allow to a pool (see reserve_pool_timeout). 0
disables.
Default: 0 (disabled)
reserve_pool_timeout
If a client has not been serviced in this many seconds, use additional connections from
the reserve pool. 0 disables.
Default: 5.0
max_db_connections
Do not allow more than this many server connections per database (regardless of user).
This considers the PgBouncer database that the client has connected to, not the PostgreSQL
database of the outgoing connection.
This can also be set per database in the [databases] section.
Note that when you hit the limit, closing a client connection to one pool will not
immediately allow a server connection to be established for another pool, because the
server connection for the first pool is still open. Once the server connection closes
(due to idle timeout), a new server connection will immediately be opened for the waiting
pool.
Default: 0 (unlimited)
max_user_connections
Do not allow more than this many server connections per user (regardless of database).
This considers the PgBouncer user that is associated with a pool, which is either the user
specified for the server connection or in absence of that the user the client has
connected as.
This can also be set per user in the [users] section.
Note that when you hit the limit, closing a client connection to one pool will not
immediately allow a server connection to be established for another pool, because the
server connection for the first pool is still open. Once the server connection closes
(due to idle timeout), a new server connection will immediately be opened for the waiting
pool.
Default: 0 (unlimited)
server_round_robin
By default, PgBouncer reuses server connections in LIFO (last-in, first-out) manner, so
that few connections get the most load. This gives best performance if you have a single
server serving a database. But if there is TCP round-robin behind a database IP address,
then it is better if PgBouncer also uses connections in that manner, thus achieving
uniform load.
Default: 0
ignore_startup_parameters
By default, PgBouncer allows only parameters it can keep track of in startup packets:
client_encoding, datestyle, timezone and standard_conforming_strings. All others
parameters will raise an error. To allow others parameters, they can be specified here,
so that PgBouncer knows that they are handled by the admin and it can ignore them.
Default: empty
disable_pqexec
Disable Simple Query protocol (PQexec). Unlike Extended Query protocol, Simple Query
allows multiple queries in one packet, which allows some classes of SQL-injection attacks.
Disabling it can improve security. Obviously this means only clients that exclusively use
the Extended Query protocol will stay working.
Default: 0
application_name_add_host
Add the client host address and port to the application name setting set on connection
start. This helps in identifying the source of bad queries etc. This logic applies only
on start of connection. If application_name is later changed with SET, PgBouncer does not
change it again.
Default: 0
conffile
Show location of current config file. Changing it will make PgBouncer use another config
file for next RELOAD / SIGHUP.
Default: file from command line
service_name
Used on win32 service registration.
Default: pgbouncer
job_name
Alias for service_name.
stats_period
Sets how often the averages shown in various SHOW commands are updated and how often
aggregated statistics are written to the log (but see log_stats). [seconds]
Default: 60
LOG SETTINGS
syslog
Toggles syslog on/off. On Windows, the event log is used instead.
Default: 0
syslog_ident
Under what name to send logs to syslog.
Default: pgbouncer (program name)
syslog_facility
Under what facility to send logs to syslog. Possibilities: auth, authpriv, daemon, user,
local0-7.
Default: daemon
log_connections
Log successful logins.
Default: 1
log_disconnections
Log disconnections with reasons.
Default: 1
log_pooler_errors
Log error messages the pooler sends to clients.
Default: 1
log_stats
Write aggregated statistics into the log, every stats_period. This can be disabled if
external monitoring tools are used to grab the same data from SHOW commands.
Default: 1
verbose
Increase verbosity. Mirrors the “-v” switch on the command line. Using “-v -v” on the
command line is the same as verbose=2.
Default: 0
CONSOLE ACCESS CONTROL
admin_users
Comma-separated list of database users that are allowed to connect and run all commands on
the console. Ignored when auth_type is any, in which case any user name is allowed in as
admin.
Default: empty
stats_users
Comma-separated list of database users that are allowed to connect and run read-only
queries on the console. That means all SHOW commands except SHOW FDS.
Default: empty
CONNECTION SANITY CHECKS, TIMEOUTS
server_reset_query
Query sent to server on connection release, before making it available to other clients.
At that moment no transaction is in progress so it should not include ABORT or ROLLBACK.
The query is supposed to clean any changes made to the database session so that the next
client gets the connection in a well-defined state. The default is DISCARD ALL which
cleans everything, but that leaves the next client no pre-cached state. It can be made
lighter, e.g. DEALLOCATE ALL to just drop prepared statements, if the application does not
break when some state is kept around.
When transaction pooling is used, the server_reset_query is not used, as clients must not
use any session-based features as each transaction ends up in a different connection and
thus gets a different session state.
Default: DISCARD ALL
server_reset_query_always
Whether server_reset_query should be run in all pooling modes. When this setting is off
(default), the server_reset_query will be run only in pools that are in sessions-pooling
mode. Connections in transaction-pooling mode should not have any need for a reset query.
This setting is for working around broken setups that run applications that use session
features over a transaction-pooled PgBouncer. It changes non-deterministic breakage to
deterministic breakage: Clients always lose their state after each transaction.
Default: 0
server_check_delay
How long to keep released connections available for immediate re-use, without running
sanity-check queries on it. If 0 then the query is ran always.
Default: 30.0
server_check_query
Simple do-nothing query to check if the server connection is alive.
If an empty string, then sanity checking is disabled.
Default: SELECT 1;
server_fast_close
Disconnect a server in session pooling mode immediately or after the end of the current
transaction if it is in “close_needed” mode (set by RECONNECT, RELOAD that changes
connection settings, or DNS change), rather than waiting for the session end. In
statement or transaction pooling mode, this has no effect since that is the default
behavior there.
If because of this setting a server connection is closed before the end of the client
session, the client connection is also closed. This ensures that the client notices that
the session has been interrupted.
This setting makes connection configuration changes take effect sooner if session pooling
and long-running sessions are used. The downside is that client sessions are liable to be
interrupted by a configuration change, so client applications will need logic to reconnect
and reestablish session state. But note that no transactions will be lost, because
running transactions are not interrupted, only idle sessions.
Default: 0
server_lifetime
The pooler will close an unused server connection that has been connected longer than
this. Setting it to 0 means the connection is to be used only once, then closed.
[seconds]
Default: 3600.0
server_idle_timeout
If a server connection has been idle more than this many seconds it will be dropped. If 0
then timeout is disabled. [seconds]
Default: 600.0
server_connect_timeout
If connection and login won’t finish in this amount of time, the connection will be
closed. [seconds]
Default: 15.0
server_login_retry
If login failed, because of failure from connect() or authentication that pooler waits
this much before retrying to connect. [seconds]
Default: 15.0
client_login_timeout
If a client connects but does not manage to log in in this amount of time, it will be
disconnected. Mainly needed to avoid dead connections stalling SUSPEND and thus online
restart. [seconds]
Default: 60.0
autodb_idle_timeout
If the automatically created (via “*“) database pools have been unused this many seconds,
they are freed. The negative aspect of that is that their statistics are also forgotten.
[seconds]
Default: 3600.0
dns_max_ttl
How long the DNS lookups can be cached. If a DNS lookup returns several answers,
PgBouncer will robin-between them in the meantime. The actual DNS TTL is ignored.
[seconds]
Default: 15.0
dns_nxdomain_ttl
How long error and NXDOMAIN DNS lookups can be cached. [seconds]
Default: 15.0
dns_zone_check_period
Period to check if a zone serial has changed.
PgBouncer can collect DNS zones from host names (everything after first dot) and then
periodically check if the zone serial changes. If it notices changes, all host names
under that zone are looked up again. If any host IP changes, its connections are
invalidated.
Works only with UDNS and c-ares backends (--with-udns or --with-cares to configure).
Default: 0.0 (disabled)
resolv_conf
The location of a custom resolv.conf file. This is to allow specifying custom DNS servers
and perhaps other name resolution options, independent of the global operating system
configuration.
Requires evdns (>= 2.0.3) or c-ares (>= 1.15.0) backend.
The parsing of the file is done by the DNS backend library, not PgBouncer, so see the
library’s documentation for details on allowed syntax and directives.
Default: empty (use operating system defaults)
TLS SETTINGS
client_tls_sslmode
TLS mode to use for connections from clients. TLS connections are disabled by default.
When enabled, client_tls_key_file and client_tls_cert_file must be also configured to set
up the key and certificate PgBouncer uses to accept client connections.
disable
Plain TCP. If client requests TLS, it’s ignored. Default.
allow If client requests TLS, it is used. If not, plain TCP is used. If the client
presents a client certificate, it is not validated.
prefer Same as allow.
require
Client must use TLS. If not, the client connection is rejected. If the client
presents a client certificate, it is not validated.
verify-ca
Client must use TLS with valid client certificate.
verify-full
Same as verify-ca.
client_tls_key_file
Private key for PgBouncer to accept client connections.
Default: not set
client_tls_cert_file
Certificate for private key. Clients can validate it.
Default: not set
client_tls_ca_file
Root certificate file to validate client certificates.
Default: not set
client_tls_protocols
Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2,
tlsv1.3. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3), secure (tlsv1.2,tlsv1.3),
legacy (all).
Default: secure
client_tls_ciphers
Allowed TLS ciphers, in OpenSSL syntax. Shortcuts: default/secure, compat/legacy,
insecure/all, normal, fast.
Only connections using TLS version 1.2 and lower are affected. There is currently no
setting that controls the cipher choices used by TLS version 1.3 connections.
Default: fast
client_tls_ecdhcurve
Elliptic Curve name to use for ECDH key exchanges.
Allowed values: none (DH is disabled), auto (256-bit ECDH), curve name.
Default: auto
client_tls_dheparams
DHE key exchange type.
Allowed values: none (DH is disabled), auto (2048-bit DH), legacy (1024-bit DH).
Default: auto
server_tls_sslmode
TLS mode to use for connections to PostgreSQL servers. TLS connections are disabled by
default.
disable
Plain TCP. TCP is not even requested from the server. Default.
allow FIXME: if server rejects plain, try TLS?
prefer TLS connection is always requested first from PostgreSQL, when refused connection
will be established over plain TCP. Server certificate is not validated.
require
Connection must go over TLS. If server rejects it, plain TCP is not attempted.
Server certificate is not validated.
verify-ca
Connection must go over TLS and server certificate must be valid according to
server_tls_ca_file. Server host name is not checked against certificate.
verify-full
Connection must go over TLS and server certificate must be valid according to
server_tls_ca_file. Server host name must match certificate information.
server_tls_ca_file
Root certificate file to validate PostgreSQL server certificates.
Default: not set
server_tls_key_file
Private key for PgBouncer to authenticate against PostgreSQL server.
Default: not set
server_tls_cert_file
Certificate for private key. PostgreSQL server can validate it.
Default: not set
server_tls_protocols
Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2,
tlsv1.3. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3), secure (tlsv1.2,tlsv1.3),
legacy (all).
Default: secure
server_tls_ciphers
Allowed TLS ciphers, in OpenSSL syntax. Shortcuts: default/secure, compat/legacy,
insecure/all, normal, fast.
Only connections using TLS version 1.2 and lower are affected. There is currently no
setting that controls the cipher choices used by TLS version 1.3 connections.
Default: fast
DANGEROUS TIMEOUTS
Setting the following timeouts can cause unexpected errors.
query_timeout
Queries running longer than that are canceled. This should be used only with slightly
smaller server-side statement_timeout, to apply only for network problems. [seconds]
Default: 0.0 (disabled)
query_wait_timeout
Maximum time queries are allowed to spend waiting for execution. If the query is not
assigned to a server during that time, the client is disconnected. This is used to
prevent unresponsive servers from grabbing up connections. [seconds]
It also helps when the server is down or database rejects connections for any reason. If
this is disabled, clients will be queued indefinitely.
Default: 120
client_idle_timeout
Client connections idling longer than this many seconds are closed. This should be larger
than the client-side connection lifetime settings, and only used for network problems.
[seconds]
Default: 0.0 (disabled)
idle_transaction_timeout
If a client has been in “idle in transaction” state longer, it will be disconnected.
[seconds]
Default: 0.0 (disabled)
suspend_timeout
How many seconds to wait for buffer flush during SUSPEND or reboot (-R). A connection is
dropped if the flush does not succeed.
Default: 10
LOW-LEVEL NETWORK SETTINGS
pkt_buf
Internal buffer size for packets. Affects size of TCP packets sent and general memory
usage. Actual libpq packets can be larger than this, so no need to set it large.
Default: 4096
max_packet_size
Maximum size for PostgreSQL packets that PgBouncer allows through. One packet is either
one query or one result set row. Full result set can be larger.
Default: 2147483647
listen_backlog
Backlog argument for listen(2). Determines how many new unanswered connection attempts
are kept in queue. When the queue is full, further new connections are dropped.
Default: 128
sbuf_loopcnt
How many times to process data on one connection, before proceeding. Without this limit,
one connection with a big result set can stall PgBouncer for a long time. One loop
processes one pkt_buf amount of data. 0 means no limit.
Default: 5
so_reuseport
Specifies whether to set the socket option SO_REUSEPORT on TCP listening sockets. On some
operating systems, this allows running multiple PgBouncer instances on the same host
listening on the same port and having the kernel distribute the connections automatically.
This option is a way to get PgBouncer to use more CPU cores. (PgBouncer is single-
threaded and uses one CPU core per instance.)
The behavior in detail depends on the operating system kernel. As of this writing, this
setting has the desired effect on (sufficiently recent versions of) Linux, DragonFlyBSD,
and FreeBSD. (On FreeBSD, it applies the socket option SO_REUSEPORT_LB instead.) Some
other operating systems support the socket option but it won’t have the desired effect: It
will allow multiple processes to bind to the same port but only one of them will get the
connections. See your operating system’s setsockopt() documentation for details.
On systems that don’t support the socket option at all, turning this setting on will
result in an error.
Each PgBouncer instance on the same host needs different settings for at least
unix_socket_dir and pidfile, as well as logfile if that is used. Also note that if you
make use of this option, you can no longer connect to a specific PgBouncer instance via
TCP/IP, which might have implications for monitoring and metrics collection.
Default: 0
tcp_defer_accept
For details on this and other TCP options, please see man 7 tcp.
Default: 45 on Linux, otherwise 0
tcp_socket_buffer
Default: not set
tcp_keepalive
Turns on basic keepalive with OS defaults.
On Linux, the system defaults are tcp_keepidle=7200, tcp_keepintvl=75, tcp_keepcnt=9.
They are probably similar on other operating systems.
Default: 1
tcp_keepcnt
Default: not set
tcp_keepidle
Default: not set
tcp_keepintvl
Default: not set
tcp_user_timeout
Sets the TCP_USER_TIMEOUT socket option. This specifies the maximum amount of time in
milliseconds that transmitted data may remain unacknowledged before the TCP connection is
forcibly closed. If set to 0, then operating system’s default is used.
This is currently only supported on Linux.
Default: 0
SECTION [DATABASES]
This contains key=value pairs where the key will be taken as a database name and the value
as a libpq connection string style list of key=value pairs. Not all features known from
libpq can be used (service=, .pgpass), since the actual libpq is not used.
The database name can contain characters _0-9A-Za-z without quoting. Names that contain
other characters need to be quoted with standard SQL identifier quoting: double quotes,
with “” for a single instance of a double quote.
The database name “pgbouncer” is reserved for the admin console and cannot be used as a
key here.
“*” acts as a fallback database: If the exact name does not exist, its value is taken as
connection string for the requested database. For example, if there is an entry (and no
other overriding entries)
* = host=foo
then a connection to PgBouncer specifying a database “bar” will effectively behave as if
an entry
bar = host=foo dbname=bar
exists (taking advantage of the default for dbname being the client-side database name;
see below).
Such automatically created database entries are cleaned up if they stay idle longer than
the time specified by the autodb_idle_timeout parameter.
dbname
Destination database name.
Default: same as client-side database name
host
Host name or IP address to connect to. Host names are resolved at connection time, the
result is cached per dns_max_ttl parameter. When a host name’s resolution changes,
existing server connections are automatically closed when they are released (according to
the pooling mode), and new server connections immediately use the new resolution. If DNS
returns several results, they are used in round-robin manner.
If the value begins with /, then a Unix socket in the file-system namespace is used. If
the value begins with @, then a Unix socket in the abstract namespace is used.
Default: not set, meaning to use a Unix socket
port
Default: 5432
user
If user= is set, all connections to the destination database will be done with the
specified user, meaning that there will be only one pool for this database.
Otherwise, PgBouncer logs into the destination database with the client user name, meaning
that there will be one pool per user.
password
If no password is specified here, the password from the auth_file or auth_query will be
used.
auth_user
Override of the global auth_user setting, if specified.
pool_size
Set the maximum size of pools for this database. If not set, the default_pool_size is
used.
min_pool_size
Set the minimum pool size for this database. If not set, the global min_pool_size is
used.
reserve_pool
Set additional connections for this database. If not set, reserve_pool_size is used.
connect_query
Query to be executed after a connection is established, but before allowing the connection
to be used by any clients. If the query raises errors, they are logged but ignored
otherwise.
pool_mode
Set the pool mode specific to this database. If not set, the default pool_mode is used.
max_db_connections
Configure a database-wide maximum (i.e. all pools within the database will not have more
than this many server connections).
client_encoding
Ask specific client_encoding from server.
datestyle
Ask specific datestyle from server.
timezone
Ask specific timezone from server.
SECTION [USERS]
This contains key=value pairs where the key will be taken as a user name and the value as
a libpq connection string style list of key=value pairs of configuration settings specific
for this user. Only a few settings are available here.
pool_mode
Set the pool mode to be used for all connections from this user. If not set, the database
or default pool_mode is used.
max_user_connections
Configure a maximum for the user (i.e. all pools with the user will not have more than
this many server connections).
INCLUDE DIRECTIVE
The PgBouncer configuration file can contain include directives, which specify another
configuration file to read and process. This allows splitting the configuration file into
physically separate parts. The include directives look like this:
%include filename
If the file name is not absolute path it is taken as relative to current working
directory.
AUTHENTICATION FILE FORMAT
PgBouncer needs its own user database. The users are loaded from a text file in the
following format:
"username1" "password" ...
"username2" "md5abcdef012342345" ...
"username2" "SCRAM-SHA-256$<iterations>:<salt>$<storedkey>:<serverkey>"
There should be at least 2 fields, surrounded by double quotes. The first field is the
user name and the second is either a plain-text, a MD5-hashed password, or a SCRAM secret.
PgBouncer ignores the rest of the line. Double quotes in a field value can be escaped by
writing two double quotes.
PostgreSQL MD5-hashed password format:
"md5" + md5(password + username)
So user admin with password 1234 will have MD5-hashed password
md545f2603610af569b6155c45067268c6b.
PostgreSQL SCRAM secret format:
SCRAM-SHA-256$<iterations>:<salt>$<storedkey>:<serverkey>
See the PostgreSQL documentation and RFC 5803 for details on this.
The passwords or secrets stored in the authentication file serve two purposes. First,
they are used to verify the passwords of incoming client connections, if a password-based
authentication method is configured. Second, they are used as the passwords for outgoing
connections to the backend server, if the backend server requires password-based
authentication (unless the password is specified directly in the database’s connection
string). The latter works if the password is stored in plain text or MD5-hashed. SCRAM
secrets can only be used for logging into a server if the client authentication also uses
SCRAM, the PgBouncer database definition does not specify a user name, and the SCRAM
secrets are identical in PgBouncer and the PostgreSQL server (same salt and iterations,
not merely the same password). This is due to an inherent security property of SCRAM: The
stored SCRAM secret cannot by itself be used for deriving login credentials.
The authentication file can be written by hand, but it’s also useful to generate it from
some other list of users and passwords. See ./etc/mkauth.py for a sample script to
generate the authentication file from the pg_shadow system table. Alternatively, use
auth_query instead of auth_file to avoid having to maintain a separate authentication
file.
HBA FILE FORMAT
It follows the format of the PostgreSQL pg_hba.conf file (see
<https://www.postgresql.org/docs/current/auth-pg-hba-conf.html>).
• Supported record types: local, host, hostssl, hostnossl.
• Database field: Supports all, sameuser, @file, multiple names. Not supported:
replication, samerole, samegroup.
• User name field: Supports all, @file, multiple names. Not supported: +groupname.
• Address field: Supports IPv4, IPv6. Not supported: DNS names, domain prefixes.
• Auth-method field: Only methods supported by PgBouncer’s auth_type are supported, except
any and pam, which only work globally. User name map (map=) parameter is not supported.
EXAMPLE
Minimal config:
[databases]
template1 = host=localhost dbname=template1 auth_user=someuser
[pgbouncer]
pool_mode = session
listen_port = 6432
listen_addr = localhost
auth_type = md5
auth_file = users.txt
logfile = pgbouncer.log
pidfile = pgbouncer.pid
admin_users = someuser
stats_users = stat_collector
Database defaults:
[databases]
; foodb over Unix socket
foodb =
; redirect bardb to bazdb on localhost
bardb = host=localhost dbname=bazdb
; access to destination database will go with single user
forcedb = host=localhost port=300 user=baz password=foo client_encoding=UNICODE datestyle=ISO
Example of a secure function for auth_query:
CREATE OR REPLACE FUNCTION pgbouncer.user_lookup(in i_username text, out uname text, out phash text)
RETURNS record AS $$
BEGIN
SELECT usename, passwd FROM pg_catalog.pg_shadow
WHERE usename = i_username INTO uname, phash;
RETURN;
END;
$$ LANGUAGE plpgsql SECURITY DEFINER;
REVOKE ALL ON FUNCTION pgbouncer.user_lookup(text) FROM public, pgbouncer;
GRANT EXECUTE ON FUNCTION pgbouncer.user_lookup(text) TO pgbouncer;
SEE ALSO
pgbouncer(1) - man page for general usage, console commands
<https://www.pgbouncer.org/>