Provided by: sssd-ad_2.7.3-2ubuntu2_amd64 
NAME
sssd-ad - SSSD Active Directory provider
DESCRIPTION
This manual page describes the configuration of the AD provider for sssd(8). For a
detailed syntax reference, refer to the “FILE FORMAT” section of the sssd.conf(5) manual
page.
The AD provider is a back end used to connect to an Active Directory server. This provider
requires that the machine be joined to the AD domain and a keytab is available. Back end
communication occurs over a GSSAPI-encrypted channel, SSL/TLS options should not be used
with the AD provider and will be superseded by Kerberos usage.
The AD provider supports connecting to Active Directory 2008 R2 or later. Earlier versions
may work, but are unsupported.
The AD provider can be used to get user information and authenticate users from trusted
domains. Currently only trusted domains in the same forest are recognized. In addition
servers from trusted domains are always auto-discovered.
The AD provider enables SSSD to use the sssd-ldap(5) identity provider and the sssd-
krb5(5) authentication provider with optimizations for Active Directory environments. The
AD provider accepts the same options used by the sssd-ldap and sssd-krb5 providers with
some exceptions. However, it is neither necessary nor recommended to set these options.
The AD provider primarily copies the traditional ldap and krb5 provider default options
with some exceptions, the differences are listed in the “MODIFIED DEFAULT OPTIONS”
section.
The AD provider can also be used as an access, chpass, sudo and autofs provider. No
configuration of the access provider is required on the client side.
If “auth_provider=ad” or “access_provider=ad” is configured in sssd.conf then the
id_provider must also be set to “ad”.
By default, the AD provider will map UID and GID values from the objectSID parameter in
Active Directory. For details on this, see the “ID MAPPING” section below. If you want to
disable ID mapping and instead rely on POSIX attributes defined in Active Directory, you
should set
ldap_id_mapping = False
If POSIX attributes should be used, it is recommended for performance reasons that the
attributes are also replicated to the Global Catalog. If POSIX attributes are replicated,
SSSD will attempt to locate the domain of a requested numerical ID with the help of the
Global Catalog and only search that domain. In contrast, if POSIX attributes are not
replicated to the Global Catalog, SSSD must search all the domains in the forest
sequentially. Please note that the “cache_first” option might be also helpful in speeding
up domainless searches. Note that if only a subset of POSIX attributes is present in the
Global Catalog, the non-replicated attributes are currently not read from the LDAP port.
Users, groups and other entities served by SSSD are always treated as case-insensitive in
the AD provider for compatibility with Active Directory's LDAP implementation.
CONFIGURATION OPTIONS
Refer to the section “DOMAIN SECTIONS” of the sssd.conf(5) manual page for details on the
configuration of an SSSD domain.
ad_domain (string)
Specifies the name of the Active Directory domain. This is optional. If not provided,
the configuration domain name is used.
For proper operation, this option should be specified as the lower-case version of the
long version of the Active Directory domain.
The short domain name (also known as the NetBIOS or the flat name) is autodetected by
the SSSD.
ad_enabled_domains (string)
A comma-separated list of enabled Active Directory domains. If provided, SSSD will
ignore any domains not listed in this option. If left unset, all domains from the AD
forest will be available.
For proper operation, this option must be specified in all lower-case and as the fully
qualified domain name of the Active Directory domain. For example:
ad_enabled_domains = sales.example.com, eng.example.com
The short domain name (also known as the NetBIOS or the flat name) will be
autodetected by SSSD.
Default: Not set
ad_server, ad_backup_server (string)
The comma-separated list of hostnames of the AD servers to which SSSD should connect
in order of preference. For more information on failover and server redundancy, see
the “FAILOVER” section.
This is optional if autodiscovery is enabled. For more information on service
discovery, refer to the “SERVICE DISCOVERY” section.
Note: Trusted domains will always auto-discover servers even if the primary server is
explicitly defined in the ad_server option.
ad_hostname (string)
Optional. On machines where the hostname(5) does not reflect the fully qualified name,
sssd will try to expand the short name. If it is not possible or the short name should
be really used instead, set this parameter explicitly.
This field is used to determine the host principal in use in the keytab and to perform
dynamic DNS updates. It must match the hostname for which the keytab was issued.
ad_enable_dns_sites (boolean)
Enables DNS sites - location based service discovery.
If true and service discovery (see Service Discovery paragraph at the bottom of the
man page) is enabled, the SSSD will first attempt to discover the Active Directory
server to connect to using the Active Directory Site Discovery and fall back to the
DNS SRV records if no AD site is found. The DNS SRV configuration, including the
discovery domain, is used during site discovery as well.
Default: true
ad_access_filter (string)
This option specifies LDAP access control filter that the user must match in order to
be allowed access. Please note that the “access_provider” option must be explicitly
set to “ad” in order for this option to have an effect.
The option also supports specifying different filters per domain or forest. This
extended filter would consist of: “KEYWORD:NAME:FILTER”. The keyword can be either
“DOM”, “FOREST” or missing.
If the keyword equals to “DOM” or is missing, then “NAME” specifies the domain or
subdomain the filter applies to. If the keyword equals to “FOREST”, then the filter
equals to all domains from the forest specified by “NAME”.
Multiple filters can be separated with the “?” character, similarly to how search
bases work.
Nested group membership must be searched for using a special OID
“:1.2.840.113556.1.4.1941:” in addition to the full DOM:domain.example.org: syntax to
ensure the parser does not attempt to interpret the colon characters associated with
the OID. If you do not use this OID then nested group membership will not be resolved.
See usage example below and refer here for further information about the OID:
[MS-ADTS] section LDAP extensions[1]
The most specific match is always used. For example, if the option specified filter
for a domain the user is a member of and a global filter, the per-domain filter would
be applied. If there are more matches with the same specification, the first one is
used.
Examples:
# apply filter on domain called dom1 only:
dom1:(memberOf=cn=admins,ou=groups,dc=dom1,dc=com)
# apply filter on domain called dom2 only:
DOM:dom2:(memberOf=cn=admins,ou=groups,dc=dom2,dc=com)
# apply filter on forest called EXAMPLE.COM only:
FOREST:EXAMPLE.COM:(memberOf=cn=admins,ou=groups,dc=example,dc=com)
# apply filter for a member of a nested group in dom1:
DOM:dom1:(memberOf:1.2.840.113556.1.4.1941:=cn=nestedgroup,ou=groups,dc=example,dc=com)
Default: Not set
ad_site (string)
Specify AD site to which client should try to connect. If this option is not provided,
the AD site will be auto-discovered.
Default: Not set
ad_enable_gc (boolean)
By default, the SSSD connects to the Global Catalog first to retrieve users from
trusted domains and uses the LDAP port to retrieve group memberships or as a fallback.
Disabling this option makes the SSSD only connect to the LDAP port of the current AD
server.
Please note that disabling Global Catalog support does not disable retrieving users
from trusted domains. The SSSD would connect to the LDAP port of trusted domains
instead. However, Global Catalog must be used in order to resolve cross-domain group
memberships.
Default: true
ad_gpo_access_control (string)
This option specifies the operation mode for GPO-based access control functionality:
whether it operates in disabled mode, enforcing mode, or permissive mode. Please note
that the “access_provider” option must be explicitly set to “ad” in order for this
option to have an effect.
GPO-based access control functionality uses GPO policy settings to determine whether
or not a particular user is allowed to logon to the host. For more information on the
supported policy settings please refer to the “ad_gpo_map” options.
Please note that current version of SSSD does not support Active Directory's built-in
groups. Built-in groups (such as Administrators with SID S-1-5-32-544) in GPO access
control rules will be ignored by SSSD. See upstream issue tracker
https://github.com/SSSD/sssd/issues/5063 .
Before performing access control SSSD applies group policy security filtering on the
GPOs. For every single user login, the applicability of the GPOs that are linked to
the host is checked. In order for a GPO to apply to a user, the user or at least one
of the groups to which it belongs must have following permissions on the GPO:
• Read: The user or one of its groups must have read access to the properties of the
GPO (RIGHT_DS_READ_PROPERTY)
• Apply Group Policy: The user or at least one of its groups must be allowed to
apply the GPO (RIGHT_DS_CONTROL_ACCESS).
By default, the Authenticated Users group is present on a GPO and this group has both
Read and Apply Group Policy access rights. Since authentication of a user must have
been completed successfully before GPO security filtering and access control are
started, the Authenticated Users group permissions on the GPO always apply also to the
user.
NOTE: If the operation mode is set to enforcing, it is possible that users that were
previously allowed logon access will now be denied logon access (as dictated by the
GPO policy settings). In order to facilitate a smooth transition for administrators, a
permissive mode is available that will not enforce the access control rules, but will
evaluate them and will output a syslog message if access would have been denied. By
examining the logs, administrators can then make the necessary changes before setting
the mode to enforcing. For logging GPO-based access control debug level 'trace
functions' is required (see sssctl(8) manual page).
There are three supported values for this option:
• disabled: GPO-based access control rules are neither evaluated nor enforced.
• enforcing: GPO-based access control rules are evaluated and enforced.
• permissive: GPO-based access control rules are evaluated, but not enforced.
Instead, a syslog message will be emitted indicating that the user would have been
denied access if this option's value were set to enforcing.
Default: enforcing
ad_gpo_implicit_deny (boolean)
Normally when no applicable GPOs are found the users are allowed access. When this
option is set to True users will be allowed access only when explicitly allowed by a
GPO rule. Otherwise users will be denied access. This can be used to harden security
but be careful when using this option because it can deny access even to users in the
built-in Administrators group if no GPO rules apply to them.
Default: False
The following 2 tables should illustrate when a user is allowed or rejected based on
the allow and deny login rights defined on the server-side and the setting of
ad_gpo_implicit_deny.
┌───────────────────────────────────────────────────┐
│ad_gpo_implicit_deny = False (default) │
├────────────┬────────────┬─────────────────────────┤
│allow-rules │ deny-rules │ results │
├────────────┼────────────┼─────────────────────────┤
│ missing │ missing │ all users are allowed │
├────────────┼────────────┼─────────────────────────┤
│ missing │ present │ only users not in │
│ │ │ deny-rules are allowed │
├────────────┼────────────┼─────────────────────────┤
│ present │ missing │ only users in │
│ │ │ allow-rules are allowed │
├────────────┼────────────┼─────────────────────────┤
│ present │ present │ only users in │
│ │ │ allow-rules and not in │
│ │ │ deny-rules are allowed │
└────────────┴────────────┴─────────────────────────┘
┌───────────────────────────────────────────────────┐
│ad_gpo_implicit_deny = True │
├────────────┬────────────┬─────────────────────────┤
│allow-rules │ deny-rules │ results │
├────────────┼────────────┼─────────────────────────┤
│ missing │ missing │ no users are allowed │
├────────────┼────────────┼─────────────────────────┤
│ missing │ present │ no users are allowed │
├────────────┼────────────┼─────────────────────────┤
│ present │ missing │ only users in │
│ │ │ allow-rules are allowed │
├────────────┼────────────┼─────────────────────────┤
│ present │ present │ only users in │
│ │ │ allow-rules and not in │
│ │ │ deny-rules are allowed │
└────────────┴────────────┴─────────────────────────┘
ad_gpo_ignore_unreadable (boolean)
Normally when some group policy containers (AD object) of applicable group policy
objects are not readable by SSSD then users are denied access. This option allows to
ignore group policy containers and with them associated policies if their attributes
in group policy containers are not readable for SSSD.
Default: False
ad_gpo_cache_timeout (integer)
The amount of time between lookups of GPO policy files against the AD server. This
will reduce the latency and load on the AD server if there are many access-control
requests made in a short period.
Default: 5 (seconds)
ad_gpo_map_interactive (string)
A comma-separated list of PAM service names for which GPO-based access control is
evaluated based on the InteractiveLogonRight and DenyInteractiveLogonRight policy
settings. Only those GPOs are evaluated for which the user has Read and Apply Group
Policy permission (see option “ad_gpo_access_control”). If an evaluated GPO contains
the deny interactive logon setting for the user or one of its groups, the user is
denied local access. If none of the evaluated GPOs has an interactive logon right
defined, the user is granted local access. If at least one evaluated GPO contains
interactive logon right settings, the user is granted local access only, if it or at
least one of its groups is part of the policy settings.
Note: Using the Group Policy Management Editor this value is called "Allow log on
locally" and "Deny log on locally".
It is possible to add another PAM service name to the default set by using
“+service_name” or to explicitly remove a PAM service name from the default set by
using “-service_name”. For example, in order to replace a default PAM service name for
this logon right (e.g. “login”) with a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_interactive = +my_pam_service, -login
Default: the default set of PAM service names includes:
• login
• su
• su-l
• gdm-fingerprint
• gdm-password
• gdm-smartcard
• kdm
• lightdm
• lxdm
• sddm
• unity
• xdm
ad_gpo_map_remote_interactive (string)
A comma-separated list of PAM service names for which GPO-based access control is
evaluated based on the RemoteInteractiveLogonRight and DenyRemoteInteractiveLogonRight
policy settings. Only those GPOs are evaluated for which the user has Read and Apply
Group Policy permission (see option “ad_gpo_access_control”). If an evaluated GPO
contains the deny remote logon setting for the user or one of its groups, the user is
denied remote interactive access. If none of the evaluated GPOs has a remote
interactive logon right defined, the user is granted remote access. If at least one
evaluated GPO contains remote interactive logon right settings, the user is granted
remote access only, if it or at least one of its groups is part of the policy
settings.
Note: Using the Group Policy Management Editor this value is called "Allow log on
through Remote Desktop Services" and "Deny log on through Remote Desktop Services".
It is possible to add another PAM service name to the default set by using
“+service_name” or to explicitly remove a PAM service name from the default set by
using “-service_name”. For example, in order to replace a default PAM service name for
this logon right (e.g. “sshd”) with a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_remote_interactive = +my_pam_service, -sshd
Default: the default set of PAM service names includes:
• sshd
• cockpit
ad_gpo_map_network (string)
A comma-separated list of PAM service names for which GPO-based access control is
evaluated based on the NetworkLogonRight and DenyNetworkLogonRight policy settings.
Only those GPOs are evaluated for which the user has Read and Apply Group Policy
permission (see option “ad_gpo_access_control”). If an evaluated GPO contains the deny
network logon setting for the user or one of its groups, the user is denied network
logon access. If none of the evaluated GPOs has a network logon right defined, the
user is granted logon access. If at least one evaluated GPO contains network logon
right settings, the user is granted logon access only, if it or at least one of its
groups is part of the policy settings.
Note: Using the Group Policy Management Editor this value is called "Access this
computer from the network" and "Deny access to this computer from the network".
It is possible to add another PAM service name to the default set by using
“+service_name” or to explicitly remove a PAM service name from the default set by
using “-service_name”. For example, in order to replace a default PAM service name for
this logon right (e.g. “ftp”) with a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_network = +my_pam_service, -ftp
Default: the default set of PAM service names includes:
• ftp
• samba
ad_gpo_map_batch (string)
A comma-separated list of PAM service names for which GPO-based access control is
evaluated based on the BatchLogonRight and DenyBatchLogonRight policy settings. Only
those GPOs are evaluated for which the user has Read and Apply Group Policy permission
(see option “ad_gpo_access_control”). If an evaluated GPO contains the deny batch
logon setting for the user or one of its groups, the user is denied batch logon
access. If none of the evaluated GPOs has a batch logon right defined, the user is
granted logon access. If at least one evaluated GPO contains batch logon right
settings, the user is granted logon access only, if it or at least one of its groups
is part of the policy settings.
Note: Using the Group Policy Management Editor this value is called "Allow log on as a
batch job" and "Deny log on as a batch job".
It is possible to add another PAM service name to the default set by using
“+service_name” or to explicitly remove a PAM service name from the default set by
using “-service_name”. For example, in order to replace a default PAM service name for
this logon right (e.g. “crond”) with a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_batch = +my_pam_service, -crond
Note: Cron service name may differ depending on Linux distribution used.
Default: the default set of PAM service names includes:
• crond
ad_gpo_map_service (string)
A comma-separated list of PAM service names for which GPO-based access control is
evaluated based on the ServiceLogonRight and DenyServiceLogonRight policy settings.
Only those GPOs are evaluated for which the user has Read and Apply Group Policy
permission (see option “ad_gpo_access_control”). If an evaluated GPO contains the deny
service logon setting for the user or one of its groups, the user is denied service
logon access. If none of the evaluated GPOs has a service logon right defined, the
user is granted logon access. If at least one evaluated GPO contains service logon
right settings, the user is granted logon access only, if it or at least one of its
groups is part of the policy settings.
Note: Using the Group Policy Management Editor this value is called "Allow log on as a
service" and "Deny log on as a service".
It is possible to add a PAM service name to the default set by using “+service_name”.
Since the default set is empty, it is not possible to remove a PAM service name from
the default set. For example, in order to add a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_service = +my_pam_service
Default: not set
ad_gpo_map_permit (string)
A comma-separated list of PAM service names for which GPO-based access is always
granted, regardless of any GPO Logon Rights.
It is possible to add another PAM service name to the default set by using
“+service_name” or to explicitly remove a PAM service name from the default set by
using “-service_name”. For example, in order to replace a default PAM service name for
unconditionally permitted access (e.g. “sudo”) with a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_permit = +my_pam_service, -sudo
Default: the default set of PAM service names includes:
• polkit-1
• sudo
• sudo-i
• systemd-user
ad_gpo_map_deny (string)
A comma-separated list of PAM service names for which GPO-based access is always
denied, regardless of any GPO Logon Rights.
It is possible to add a PAM service name to the default set by using “+service_name”.
Since the default set is empty, it is not possible to remove a PAM service name from
the default set. For example, in order to add a custom pam service name (e.g.
“my_pam_service”), you would use the following configuration:
ad_gpo_map_deny = +my_pam_service
Default: not set
ad_gpo_default_right (string)
This option defines how access control is evaluated for PAM service names that are not
explicitly listed in one of the ad_gpo_map_* options. This option can be set in two
different manners. First, this option can be set to use a default logon right. For
example, if this option is set to 'interactive', it means that unmapped PAM service
names will be processed based on the InteractiveLogonRight and
DenyInteractiveLogonRight policy settings. Alternatively, this option can be set to
either always permit or always deny access for unmapped PAM service names.
Supported values for this option include:
• interactive
• remote_interactive
• network
• batch
• service
• permit
• deny
Default: deny
ad_maximum_machine_account_password_age (integer)
SSSD will check once a day if the machine account password is older than the given age
in days and try to renew it. A value of 0 will disable the renewal attempt.
Default: 30 days
ad_machine_account_password_renewal_opts (string)
This option should only be used to test the machine account renewal task. The option
expects 2 integers separated by a colon (':'). The first integer defines the interval
in seconds how often the task is run. The second specifies the initial timeout in
seconds before the task is run for the first time after startup.
Default: 86400:750 (24h and 15m)
ad_update_samba_machine_account_password (boolean)
If enabled, when SSSD renews the machine account password, it will also be updated in
Samba's database. This prevents Samba's copy of the machine account password from
getting out of date when it is set up to use AD for authentication.
Default: false
ad_use_ldaps (bool)
By default SSSD uses the plain LDAP port 389 and the Global Catalog port 3628. If this
option is set to True SSSD will use the LDAPS port 636 and Global Catalog port 3629
with LDAPS protection. Since AD does not allow to have multiple encryption layers on a
single connection and we still want to use SASL/GSSAPI or SASL/GSS-SPNEGO for
authentication the SASL security property maxssf is set to 0 (zero) for those
connections.
Default: False
ad_allow_remote_domain_local_groups (boolean)
If this option is set to “true” SSSD will not filter out Domain Local groups from
remote domains in the AD forest. By default they are filtered out e.g. when following
a nested group hierarchy in remote domains because they are not valid in the local
domain. To be compatible with other solutions which make AD users and groups available
on Linux client this option was added.
Please note that setting this option to “true” will be against the intention of Domain
Local group in Active Directory and SHOULD ONLY BE USED TO FACILITATE MIGRATION FROM
OTHER SOLUTIONS. Although the group exists and user can be member of the group the
intention is that the group should be only used in the domain it is defined and in no
others. Since there is only one type of POSIX groups the only way to achieve this on
the Linux side is to ignore those groups. This is also done by Active Directory as can
be seen in the PAC of the Kerberos ticket for a local service or in tokenGroups
requests where remote Domain Local groups are missing as well.
Given the comments above, if this option is set to “true” the tokenGroups request must
be disabled by setting “ldap_use_tokengroups” to “false” to get consistent
group-memberships of a users. Additionally the Global Catalog lookup should be skipped
as well by setting “ad_enable_gc” to “false”. Finally it might be necessary to modify
“ldap_group_nesting_level” if the remote Domain Local groups can only be found with a
deeper nesting level.
Default: False
dyndns_update (boolean)
Optional. This option tells SSSD to automatically update the Active Directory DNS
server with the IP address of this client. The update is secured using GSS-TSIG. As a
consequence, the Active Directory administrator only needs to allow secure updates for
the DNS zone. The IP address of the AD LDAP connection is used for the updates, if it
is not otherwise specified by using the “dyndns_iface” option.
NOTE: On older systems (such as RHEL 5), for this behavior to work reliably, the
default Kerberos realm must be set properly in /etc/krb5.conf
Default: true
dyndns_ttl (integer)
The TTL to apply to the client DNS record when updating it. If dyndns_update is false
this has no effect. This will override the TTL serverside if set by an administrator.
Default: 3600 (seconds)
dyndns_iface (string)
Optional. Applicable only when dyndns_update is true. Choose the interface or a list
of interfaces whose IP addresses should be used for dynamic DNS updates. Special value
“*” implies that IPs from all interfaces should be used.
Default: Use the IP addresses of the interface which is used for AD LDAP connection
Example: dyndns_iface = em1, vnet1, vnet2
dyndns_refresh_interval (integer)
How often should the back end perform periodic DNS update in addition to the automatic
update performed when the back end goes online. This option is optional and applicable
only when dyndns_update is true. Note that the lowest possible value is 60 seconds
in-case if value is provided less than 60, parameter will assume lowest value only.
Default: 86400 (24 hours)
dyndns_update_ptr (bool)
Whether the PTR record should also be explicitly updated when updating the client's
DNS records. Applicable only when dyndns_update is true.
Default: True
dyndns_force_tcp (bool)
Whether the nsupdate utility should default to using TCP for communicating with the
DNS server.
Default: False (let nsupdate choose the protocol)
dyndns_auth (string)
Whether the nsupdate utility should use GSS-TSIG authentication for secure updates
with the DNS server, insecure updates can be sent by setting this option to 'none'.
Default: GSS-TSIG
dyndns_auth_ptr (string)
Whether the nsupdate utility should use GSS-TSIG authentication for secure PTR updates
with the DNS server, insecure updates can be sent by setting this option to 'none'.
Default: Same as dyndns_auth
dyndns_server (string)
The DNS server to use when performing a DNS update. In most setups, it's recommended
to leave this option unset.
Setting this option makes sense for environments where the DNS server is different
from the identity server.
Please note that this option will be only used in fallback attempt when previous
attempt using autodetected settings failed.
Default: None (let nsupdate choose the server)
dyndns_update_per_family (boolean)
DNS update is by default performed in two steps - IPv4 update and then IPv6 update. In
some cases it might be desirable to perform IPv4 and IPv6 update in single step.
Default: true
override_homedir (string)
Override the user's home directory. You can either provide an absolute value or a
template. In the template, the following sequences are substituted:
%u
login name
%U
UID number
%d
domain name
%f
fully qualified user name (user@domain)
%l
The first letter of the login name.
%P
UPN - User Principal Name (name@REALM)
%o
The original home directory retrieved from the identity provider.
%H
The value of configure option homedir_substring.
%%
a literal '%'
This option can also be set per-domain.
example:
override_homedir = /home/%u
Default: Not set (SSSD will use the value retrieved from LDAP)
Please note, the home directory from a specific override for the user, either locally
(see sss_override(8)) or centrally managed IPA id-overrides, has a higher precedence
and will be used instead of the value given by override_homedir.
homedir_substring (string)
The value of this option will be used in the expansion of the override_homedir option
if the template contains the format string %H. An LDAP directory entry can directly
contain this template so that this option can be used to expand the home directory
path for each client machine (or operating system). It can be set per-domain or
globally in the [nss] section. A value specified in a domain section will override one
set in the [nss] section.
Default: /home
krb5_confd_path (string)
Absolute path of a directory where SSSD should place Kerberos configuration snippets.
To disable the creation of the configuration snippets set the parameter to 'none'.
Default: not set (krb5.include.d subdirectory of SSSD's pubconf directory)
MODIFIED DEFAULT OPTIONS
Certain option defaults do not match their respective backend provider defaults, these
option names and AD provider-specific defaults are listed below:
KRB5 Provider
• krb5_validate = true
• krb5_use_enterprise_principal = true
LDAP Provider
• ldap_schema = ad
• ldap_force_upper_case_realm = true
• ldap_id_mapping = true
• ldap_sasl_mech = GSS-SPNEGO
• ldap_referrals = false
• ldap_account_expire_policy = ad
• ldap_use_tokengroups = true
• ldap_sasl_authid = sAMAccountName@REALM (typically SHORTNAME$@REALM)
The AD provider looks for a different principal than the LDAP provider by default,
because in an Active Directory environment the principals are divided into two groups
- User Principals and Service Principals. Only User Principal can be used to obtain a
TGT and by default, computer object's principal is constructed from its sAMAccountName
and the AD realm. The well-known host/hostname@REALM principal is a Service Principal
and thus cannot be used to get a TGT with.
NSS configuration
• fallback_homedir = /home/%d/%u
The AD provider automatically sets "fallback_homedir = /home/%d/%u" to provide
personal home directories for users without the homeDirectory attribute. If your AD
Domain is properly populated with Posix attributes, and you want to avoid this
fallback behavior, you can explicitly set "fallback_homedir = %o".
Note that the system typically expects a home directory in /home/%u folder. If you
decide to use a different directory structure, some other parts of your system may
need adjustments.
For example automated creation of home directories in combination with selinux
requires selinux adjustment, otherwise the home directory will be created with wrong
selinux context.
FAILOVER
The failover feature allows back ends to automatically switch to a different server if the
current server fails.
Failover Syntax
The list of servers is given as a comma-separated list; any number of spaces is allowed
around the comma. The servers are listed in order of preference. The list can contain any
number of servers.
For each failover-enabled config option, two variants exist: primary and backup. The idea
is that servers in the primary list are preferred and backup servers are only searched if
no primary servers can be reached. If a backup server is selected, a timeout of 31 seconds
is set. After this timeout SSSD will periodically try to reconnect to one of the primary
servers. If it succeeds, it will replace the current active (backup) server.
The Failover Mechanism
The failover mechanism distinguishes between a machine and a service. The back end first
tries to resolve the hostname of a given machine; if this resolution attempt fails, the
machine is considered offline. No further attempts are made to connect to this machine for
any other service. If the resolution attempt succeeds, the back end tries to connect to a
service on this machine. If the service connection attempt fails, then only this
particular service is considered offline and the back end automatically switches over to
the next service. The machine is still considered online and might still be tried for
another service.
Further connection attempts are made to machines or services marked as offline after a
specified period of time; this is currently hard coded to 30 seconds.
If there are no more machines to try, the back end as a whole switches to offline mode,
and then attempts to reconnect every 30 seconds.
Failover time outs and tuning
Resolving a server to connect to can be as simple as running a single DNS query or can
involve several steps, such as finding the correct site or trying out multiple host names
in case some of the configured servers are not reachable. The more complex scenarios can
take some time and SSSD needs to balance between providing enough time to finish the
resolution process but on the other hand, not trying for too long before falling back to
offline mode. If the SSSD debug logs show that the server resolution is timing out before
a live server is contacted, you can consider changing the time outs.
This section lists the available tunables. Please refer to their description in the
sssd.conf(5), manual page.
dns_resolver_server_timeout
Time in milliseconds that sets how long would SSSD talk to a single DNS server before
trying next one.
Default: 1000
dns_resolver_op_timeout
Time in seconds to tell how long would SSSD try to resolve single DNS query (e.g.
resolution of a hostname or an SRV record) before trying the next hostname or
discovery domain.
Default: 3
dns_resolver_timeout
How long would SSSD try to resolve a failover service. This service resolution
internally might include several steps, such as resolving DNS SRV queries or locating
the site.
Default: 6
For LDAP-based providers, the resolve operation is performed as part of an LDAP connection
operation. Therefore, also the “ldap_opt_timeout” timeout should be set to a larger value
than “dns_resolver_timeout” which in turn should be set to a larger value than
“dns_resolver_op_timeout” which should be larger than “dns_resolver_server_timeout”.
SERVICE DISCOVERY
The service discovery feature allows back ends to automatically find the appropriate
servers to connect to using a special DNS query. This feature is not supported for backup
servers.
Configuration
If no servers are specified, the back end automatically uses service discovery to try to
find a server. Optionally, the user may choose to use both fixed server addresses and
service discovery by inserting a special keyword, “_srv_”, in the list of servers. The
order of preference is maintained. This feature is useful if, for example, the user
prefers to use service discovery whenever possible, and fall back to a specific server
when no servers can be discovered using DNS.
The domain name
Please refer to the “dns_discovery_domain” parameter in the sssd.conf(5) manual page for
more details.
The protocol
The queries usually specify _tcp as the protocol. Exceptions are documented in respective
option description.
See Also
For more information on the service discovery mechanism, refer to RFC 2782.
ID MAPPING
The ID-mapping feature allows SSSD to act as a client of Active Directory without
requiring administrators to extend user attributes to support POSIX attributes for user
and group identifiers.
NOTE: When ID-mapping is enabled, the uidNumber and gidNumber attributes are ignored. This
is to avoid the possibility of conflicts between automatically-assigned and
manually-assigned values. If you need to use manually-assigned values, ALL values must be
manually-assigned.
Please note that changing the ID mapping related configuration options will cause user and
group IDs to change. At the moment, SSSD does not support changing IDs, so the SSSD
database must be removed. Because cached passwords are also stored in the database,
removing the database should only be performed while the authentication servers are
reachable, otherwise users might get locked out. In order to cache the password, an
authentication must be performed. It is not sufficient to use sss_cache(8) to remove the
database, rather the process consists of:
• Making sure the remote servers are reachable
• Stopping the SSSD service
• Removing the database
• Starting the SSSD service
Moreover, as the change of IDs might necessitate the adjustment of other system properties
such as file and directory ownership, it's advisable to plan ahead and test the ID mapping
configuration thoroughly.
Mapping Algorithm
Active Directory provides an objectSID for every user and group object in the directory.
This objectSID can be broken up into components that represent the Active Directory domain
identity and the relative identifier (RID) of the user or group object.
The SSSD ID-mapping algorithm takes a range of available UIDs and divides it into
equally-sized component sections - called "slices"-. Each slice represents the space
available to an Active Directory domain.
When a user or group entry for a particular domain is encountered for the first time, the
SSSD allocates one of the available slices for that domain. In order to make this
slice-assignment repeatable on different client machines, we select the slice based on the
following algorithm:
The SID string is passed through the murmurhash3 algorithm to convert it to a 32-bit
hashed value. We then take the modulus of this value with the total number of available
slices to pick the slice.
NOTE: It is possible to encounter collisions in the hash and subsequent modulus. In these
situations, we will select the next available slice, but it may not be possible to
reproduce the same exact set of slices on other machines (since the order that they are
encountered will determine their slice). In this situation, it is recommended to either
switch to using explicit POSIX attributes in Active Directory (disabling ID-mapping) or
configure a default domain to guarantee that at least one is always consistent. See
“Configuration” for details.
Configuration
Minimum configuration (in the “[domain/DOMAINNAME]” section):
ldap_id_mapping = True
ldap_schema = ad
The default configuration results in configuring 10,000 slices, each capable of holding up
to 200,000 IDs, starting from 200,000 and going up to 2,000,200,000. This should be
sufficient for most deployments.
Advanced Configuration
ldap_idmap_range_min (integer)
Specifies the lower (inclusive) bound of the range of POSIX IDs to use for mapping
Active Directory user and group SIDs. It is the first POSIX ID which can be used
for the mapping.
NOTE: This option is different from “min_id” in that “min_id” acts to filter the
output of requests to this domain, whereas this option controls the range of ID
assignment. This is a subtle distinction, but the good general advice would be to
have “min_id” be less-than or equal to “ldap_idmap_range_min”
Default: 200000
ldap_idmap_range_max (integer)
Specifies the upper (exclusive) bound of the range of POSIX IDs to use for mapping
Active Directory user and group SIDs. It is the first POSIX ID which cannot be
used for the mapping anymore, i.e. one larger than the last one which can be used
for the mapping.
NOTE: This option is different from “max_id” in that “max_id” acts to filter the
output of requests to this domain, whereas this option controls the range of ID
assignment. This is a subtle distinction, but the good general advice would be to
have “max_id” be greater-than or equal to “ldap_idmap_range_max”
Default: 2000200000
ldap_idmap_range_size (integer)
Specifies the number of IDs available for each slice. If the range size does not
divide evenly into the min and max values, it will create as many complete slices
as it can.
NOTE: The value of this option must be at least as large as the highest user RID
planned for use on the Active Directory server. User lookups and login will fail
for any user whose RID is greater than this value.
For example, if your most recently-added Active Directory user has
objectSid=S-1-5-21-2153326666-2176343378-3404031434-1107, “ldap_idmap_range_size”
must be at least 1108 as range size is equal to maximal SID minus minimal SID plus
one (e.g. 1108 = 1107 - 0 + 1).
It is important to plan ahead for future expansion, as changing this value will
result in changing all of the ID mappings on the system, leading to users with
different local IDs than they previously had.
Default: 200000
ldap_idmap_default_domain_sid (string)
Specify the domain SID of the default domain. This will guarantee that this domain
will always be assigned to slice zero in the ID map, bypassing the murmurhash
algorithm described above.
Default: not set
ldap_idmap_default_domain (string)
Specify the name of the default domain.
Default: not set
ldap_idmap_autorid_compat (boolean)
Changes the behavior of the ID-mapping algorithm to behave more similarly to
winbind's “idmap_autorid” algorithm.
When this option is configured, domains will be allocated starting with slice zero
and increasing monatomically with each additional domain.
NOTE: This algorithm is non-deterministic (it depends on the order that users and
groups are requested). If this mode is required for compatibility with machines
running winbind, it is recommended to also use the “ldap_idmap_default_domain_sid”
option to guarantee that at least one domain is consistently allocated to slice
zero.
Default: False
ldap_idmap_helper_table_size (integer)
Maximal number of secondary slices that is tried when performing mapping from UNIX
id to SID.
Note: Additional secondary slices might be generated when SID is being mapped to
UNIX id and RID part of SID is out of range for secondary slices generated so far.
If value of ldap_idmap_helper_table_size is equal to 0 then no additional
secondary slices are generated.
Default: 10
Well-Known SIDs
SSSD supports to look up the names of Well-Known SIDs, i.e. SIDs with a special hardcoded
meaning. Since the generic users and groups related to those Well-Known SIDs have no
equivalent in a Linux/UNIX environment no POSIX IDs are available for those objects.
The SID name space is organized in authorities which can be seen as different domains. The
authorities for the Well-Known SIDs are
• Null Authority
• World Authority
• Local Authority
• Creator Authority
• NT Authority
• Built-in
The capitalized version of these names are used as domain names when returning the fully
qualified name of a Well-Known SID.
Since some utilities allow to modify SID based access control information with the help of
a name instead of using the SID directly SSSD supports to look up the SID by the name as
well. To avoid collisions only the fully qualified names can be used to look up Well-Known
SIDs. As a result the domain names “NULL AUTHORITY”, “WORLD AUTHORITY”, “ LOCAL
AUTHORITY”, “CREATOR AUTHORITY”, “NT AUTHORITY” and “BUILTIN” should not be used as domain
names in sssd.conf.
EXAMPLE
The following example assumes that SSSD is correctly configured and example.com is one of
the domains in the [sssd] section. This example shows only the AD provider-specific
options.
[domain/EXAMPLE]
id_provider = ad
auth_provider = ad
access_provider = ad
chpass_provider = ad
ad_server = dc1.example.com
ad_hostname = client.example.com
ad_domain = example.com
NOTES
The AD access control provider checks if the account is expired. It has the same effect as
the following configuration of the LDAP provider:
access_provider = ldap
ldap_access_order = expire
ldap_account_expire_policy = ad
However, unless the “ad” access control provider is explicitly configured, the default
access provider is “permit”. Please note that if you configure an access provider other
than “ad”, you need to set all the connection parameters (such as LDAP URIs and encryption
details) manually.
When the autofs provider is set to “ad”, the RFC2307 schema attribute mapping (nisMap,
nisObject, ...) is used, because these attributes are included in the default Active
Directory schema.
SEE ALSO
sssd(8), sssd.conf(5), sssd-ldap(5), sssd-krb5(5), sssd-simple(5), sssd-ipa(5), sssd-
ad(5), sssd-files(5), sssd-sudo(5), sssd-session-recording(5), sss_cache(8),
sss_debuglevel(8), sss_obfuscate(8), sss_seed(8), sssd_krb5_locator_plugin(8),
sss_ssh_authorizedkeys(8), sss_ssh_knownhostsproxy(8), sssd-ifp(5), pam_sss(8).
sss_rpcidmapd(5) sssd-systemtap(5)
AUTHORS
The SSSD upstream - https://github.com/SSSD/sssd/
NOTES
1. [MS-ADTS] section LDAP extensions
https://msdn.microsoft.com/en-us/library/cc223367.aspx