NAME

       usbguard-daemon.conf - USBGuard daemon configuration file

DESCRIPTION

       The usbguard-daemon.conf file is loaded by the USBGuard daemon after it parses its
       command-line options. It is used to configure runtime parameters of the daemon. The
       default search path is /etc/usbguard/usbguard-daemon.conf. It may be overridden using the
       -c command-line option, see usbguard-daemon(8) for further details.

OPTIONS

       RuleFile=path
           The USBGuard daemon will use this file to load the policy rule set from it and to
           write new rules received via the IPC interface. Default:
           %sysconfdir%/usbguard/rules.conf

       RuleFolder=path
           The USBGuard daemon will use this folder to load the policy rule set from it and to
           write new rules received via the IPC interface. Usually, we set the option to
           /etc/usbguard/rules.d/. The USBGuard daemon is supposed to behave like any other
           standard Linux daemon therefore it loads rule files in alpha-numeric order. File names
           inside RuleFolder directory should start with a two-digit number prefix indicating the
           position, in which the rules are scanned by the daemon.

       ImplicitPolicyTarget=target
           How to treat USB devices that don’t match any rule in the policy. Target should be one
           of allow, block or reject (logically remove the device node from the system). Default:
           block

       PresentDevicePolicy=policy
           How to treat USB devices that are already connected when the daemon starts. Policy
           should be one of allow, block, reject, keep (keep whatever state the device is
           currently in) or apply-policy (evaluate the rule set for every present device).
           Default: apply-policy

       PresentControllerPolicy=policy
           How to treat USB controller devices that are already connected when the daemon starts.
           One of allow, block, reject, keep or apply-policy. Default: keep

       InsertedDevicePolicy=policy
           How to treat USB devices that are already connected after the daemon starts. One of
           block, reject, apply-policy. Default: apply-policy

       AuthorizedDefault=authorizedDefault
           The USBGuard daemon modifies some of the default authorization state attributes of
           controller devices. This setting, enables you to define what value the default
           authorization is set to. Authorized default should be one of keep (do not change
           authorization state), none (every new device starts out deauthorized), all (every new
           device starts out authorized) or internal (internal devices start out authorized,
           external do not). Default: none

       RestoreControllerDeviceState=boolean
           The USBGuard daemon modifies some attributes of controller devices like the default
           authorization state of new child device instances. Using this setting, you can control
           whether the daemon will try to restore the attribute values to the state before
           modification on shutdown. Default: false

       DeviceManagerBackend=backend
           Which device manager backend implementation to use. Backend should be one of uevent
           (default) or umockdev (useful for testing). UEvent backend is a netlink based
           implementation which uses sysfs to scan for present devices and an uevent socket for
           receiving USB device related events. UMockDev based device manager is capable of
           simulating devices based on umockdev-record files. Default: uevent

       IPCAllowedUsers=username [username ...]
           A space delimited list of usernames that the daemon will accept IPC connections from.
           Default: root

       IPCAllowedGroups=groupname [groupname ...]
           A space delimited list of groupnames that the daemon will accept IPC connections from.

       IPCAccessControlFiles=path
           The files at this location will be interpreted by the daemon as IPC access control
           definition files. See the IPC ACCESS CONTROL section for more details.

       DeviceRulesWithPort=boolean
           Generate device specific rules including the "via-port" attribute. Default: false

       AuditBackend=backend
           USBGuard audit events log backend. The backend value should be one of FileAudit or
           LinuxAudit. Default: FileAudit

       AuditFilePath=filepath
           USBGuard audit events log file path. Required if AuditBackend is set to FileAudit.
           Default: %localstatedir%/log/usbguard/usbguard-audit.log

       HidePII=boolean
           Hides personally identifiable information such as device serial numbers and hashes of
           descriptors (which include the serial number) from audit entries. Default: false

SECURITY CONSIDERATIONS

   IPC
       The daemon provides the USBGuard public IPC interface. Depending on your distribution
       defaults, access to this interface is limited to a certain group or a specific user only.
       Please set either the IPCAllowedUsers, IPCAllowedGroups or IPCAccessControlFiles options
       to limit access to the IPC interface. Do not leave the ACL unconfigured as that will
       expose the IPC interface to all local users and will allow them to manipulate the
       authorization state of USB devices and modify the USBGuard policy.

   RestoreControllerDeviceState configuration option
       If set to true, the USB authorization policy could be bypassed by performing some sort of
       attack on the daemon (via a local exploit or via a USB device) to make it shutdown and
       restore to the operating-system default state (known to be permissive).

IPC ACCESS CONTROL

       Access to the USBGuard IPC interface can be limited per user or group. Furthermore, by
       using the IPC Access Control files, it is possible to limit the access down to the level
       of Sections and Privileges as explained below.

   Recommended: IPCAccessControlFiles
       When you set IPCAccessControlFiles option, the daemon will look for IPC access control
       files in the directory specified by the set value. Each file in the directory is processed
       as follows:

        1. The basename of the file is interpreted as a username, UID, groupname or GID. If the
           name starts with : (colon), it is assumed that the rest of the name represents a group
           identifier (groupname or GID in case of a numeric-only string). Otherwise, it is
           interpreted as a user identifier (username or UID in case of numeric-only string).

        2. The contents of the file are parsed as Section=[privilege1][,privilege2] ...
           formatted lines which specify the section privileges. If a section is omitted, it is
           assumed that no privileges are given for that section.

       Available sections and privileges:

       •   Devices

           •   modify: Change authorization state of devices including permanent changes (i.e.
               modification of device specific rules in the policy).

           •   list: Ability to get a list of recognized devices and their attributes.

           •   listen: Listen to device presence and device policy changes.

       •   Policy

           •   modify: Append rules to or remove any rules from the policy.

           •   list: Ability to view the currently enforced policy.

       •   Exceptions

           •   listen: Receive exception messages.

       •   Parameters

           •   modify: Set values of run-time parameters.

           •   list: Get values of run-time parameters.

           •   listen: Listen to property parameter changes.

       The following is a generally usable and reasonably safe example of an access control file.
       It allows one to modify USB device authorization state (Devices=modify), list USB devices
       (Devices=list), listen to USB device related events (Devices=listen), list USB
       authorization policy rules (Policy=list) and listen to exception events
       (Exceptions=listen):

           Devices=modify,list,listen
           Policy=list
           Exceptions=listen

       You can create or remove the IPC access control files using usbguard add-user and usbguard
       remove-user CLI commands. See usbguard(1) for more details. If you want to create the IPC
       access control files manually, you need to set the files permissions to 0600.

   Legacy: IPCAllowedUsers and IPCAllowedGroups
       Example configuration allowing full IPC access to users root, joe and members of the group
       wheel:

           IPCAllowedUsers=root joe
           IPCAllowedGroups=wheel

SEE ALSO

       usbguard-daemon(8), usbguard-rules.conf(5)

BUGS

       If you find a bug in this software or if you’d like to request a feature to be
       implemented, please file a ticket at https://github.com/USBGuard/usbguard/issues/new.

AUTHOR

       USBGuard was originally written by Daniel Kopeček. Many people have contributed to it.

RESOURCES

       Main web site: https://usbguard.github.io/

COPYING

       License GPLv2+: GNU GPL version 2 or later http://gnu.org/licenses/gpl.html. This is free
       software: you are free to change and redistribute it. There is NO WARRANTY, to the extent
       permitted by law.

                                            06/13/2022                       USBGUARD-DAEMON.C(5)