Provided by: gemrb_0.9.0+dfsg-1build1_amd64 bug

NAME

       GemRB - a reimplementation of the Infinity Engine

SYNOPSIS

       gemrb [-q] [-c CONFIG-FILE]
       gemrb PATH-TO-GAME
       torment

DESCRIPTION

       GemRB  a portable open-source implementation of Bioware’s Infinity Engine, which runs fine
       RPGs like Baldur's Gate, Icewind Dale and Planescape: Torment.

       GemRB reimplements only the game engine. To actually play anything, you have to  have  the
       data  from the original game(s), installed or unpackaged where GemRB can find it.  See the
       GamePath and CDn settings in the engine  configuration  file  below.  A  full  install  is
       recommended.

OPTIONS

       -q     Disable audio completely, regardless of supported audio plugins.

       -c FILE
              Use the specified configuration file FILE instead of the default gemrb.cfg.

              Note:  You  can  also  use the program's name as a mean to select the configuration
              file.  For example, if the program's name is torment instead of gemrb,  the  engine
              first  searches  for  torment.cfg  and  only  if  it's  not  found  it searches for
              gemrb.cfg.

              To use this feature, just create a symbolic link  torment  pointing  to  the  gemrb
              binary and then run torment instead.

CONFIGURATION

       A  configuration file consists of pairs PARAMETER=VALUE, each on its own line. The case of
       PARAMETER is not significant, GameType is the same as GAMETYPE. If the same  PARAMETER  is
       defined more than once, only the last occurrence is used.

       Empty lines and lines starting with `#' (hash sign) are ignored.

       At  least  the  GamePath  parameter  needs  to be changed. That is often enough, so do not
       fiddle with the other paths too much.

General Parameters:

       GameType=(auto|bg1|bg2|iwd|iwd2|how|pst)
              Type of the game. The value is a name of subdirectory in override/ and  GUIScripts/
              directories  with  game type-specific files and scripts. It is at present also used
              for various tweaks hardcoded in the GemRB engine. To autodetect the game type,  use
              the default "auto".

       GameName=STRING
              Arbitrary name of the game. It will be displayed in the window's title bar.

       Encoding=(default|polish|czech|german)
              Specify language used in the game data.

       GUIEnhancements=INT
              The  value  is  a bitfield. Set it to 1 to enable a few GUI enhancements, mostly in
              BG2.  Set to 2 or 3 to try to autoidentify items on transfer (if the character  has
              enough lore).  Disabled by default.

       EndianSwitch=(0|1)
              Set  this  to  1  if  you  are  running  GemRB on a big-endian machine. Disabled by
              default.

       MultipleQuickSaves=(0|1)
              EXPERIMENTAL. Set this to 1 if you want GemRB to keep multiple  quicksaves  around.
              Disabled by default.

       MaxPartySize=INT
              Set  this  to  1-10  if you want more party members or enforce fewer. 6 by default.
              NOTE: For bigger parties you need to choose a big enough resolution, so there  will
              be  enough  room for all the party portraits! No space for that in PST or IWD2. The
              10pp mod is required to fix various game scripts, so the extra party members  don't
              get stuck in cutscenes.

       Logging=(0|1)
              By  default (set to 1) logging is enabled and several loggers are used depending on
              the plaftorm. Use 0 to disable all logging, which can help in performance  critical
              settings.

Video Parameters:

       Width=INT
              Game window width (in pixels).

              WARNING: This is not arbitrary but depends on the game data. For custom resolutions
              the widescreen mod needs to be used.

       Height=INT
              Game window height (in pixels).

              WARNING: This is not arbitrary but depends on the game data. For custom resolutions
              the widescreen mod needs to be used.

       Bpp=INT
              Color depth of the game window (in bits per pixel).

       Fullscreen=(0|1)
              Whether the game should run in fullscreen mode.

       SkipIntroVideos=(0|1)
              If  set to 1, the intro and logo videos are skipped to save developer's nerves. The
              default is 0.

       GCDebug=(0|2047)
              Bitfield with reserved bits for drawing Map debug layers.
                No Debugging features = 0 (default)
                DEBUG_SHOW_INFOPOINTS            = 1
                DEBUG_SHOW_CONTAINERS            = 2
                DEBUG_SHOW_DOORS                 = 4
                DEBUG_SHOW_DOORS_SECRET          = 8
                DEBUG_SHOW_DOORS_DISABLED        = 16
                DEBUG_SHOW_DOORS_ALL             = 28
                DEBUG_SHOW_LIGHTMAP              = 32
                DEBUG_SHOW_WALLS                 = 64
                DEBUG_SHOW_WALLS_ANIM_COVER = 128
                DEBUG_SHOW_WALLS_ALL             = 192
                DEBUG_SHOW_SEARCHMAP             = 256
                DEBUG_SHOW_FOG_UNEXPLORED        = 512
                DEBUG_SHOW_FOG_INVISIBLE         = 1024
                DEBUG_SHOW_FOG_ALL               = 1536

Audio Parameters:

       AudioDriver=(openal|sdlaudio|none)
              Use the specified plugin as the audio driver. The default  is  openal,  while  none
              will disable all audio.

Path parameters:

       CaseSensitive=(0|1)
              When  this  parameter  is set to 1, the engine will try to find files regardless of
              their names' case at the cost  of  a  slight  speed  penalty.  This  is  especially
              important  when using game files on CD-ROMs, where the files can't be renamed. Like
              many Windows programs, the original games use inconsistent mix of lower/upper  case
              letters for naming and referencing their files.

              Set this parameter to 1 on Unix-like systems.

       GamePath=PATH
              Path  to  the  directory where the original game is installed. If you can't install
              the game under MS Windows or with WINE, you can try to unpack the data  files  with
              the unshield program found at http://synce.sourceforge.net.

       CD1=PATH
       CD2=PATH
       CDn=...
              Path to the data files for the game's particular CDs or any other data sources.

       CachePath=PATH
              User-writable  directory  where the engine caches uncompressed and temporary files.
              Defaults to a subdirectory of the current directory.

       GemRBPath=PATH
              Path to the GemRB installation. (To be obsoleted; preset at build time).

       GUIScriptsPath=PATH
              Path to the directory with scripts controlling the game's GUI.  (To  be  obsoleted;
              preset at build time).

       GemRBOverridePath=PATH
              Path  where GemRB looks for its game override directory.  It defaults to GemRBPath.
              GemRB reuses some of the unused files from the original or replaces them  and  this
              is  the  where they can be found. The path is preset at build time.  This directory
              has the highest priority when searching, so putting files in the game override will
              not affect them. Use another directory and add it as ModPath to the GemRB config.

       GemRBUnhardcodedPath=PATH
              Path  where GemRB looks for its unhardcoded engine data.  It defaults to GemRBPath.
              The original games hardcoded this information in the engine.  The path is preset at
              build time.

       The  following  variables do not need to be altered, unless you are doing something really
       special!

       SavePath=PATH
              Path to the directory with save games. Note that  this  directory  has  to  contain
              save/  and/or  eventually mpsave/ subdirectories and that only these subdirectories
              contain the actual saved games.

              SavePath defaults to GamePath.

       GameDataPath=PATH
              Path to the original game's installed data files, relative  to  GamePath.   Usually
              it's data.

       GameOverridePath=PATH
              Path  to  the  original  game's  override  dir, relative to GamePath.  Usually it's
              override.  Original games use this directory to place last-minute patches.

       GameCharactersPath=PATH
              Path to the original game's installed data files, relative  to  GamePath.   Usually
              it's characters.

       GamePortraitsPath=PATH
              Path  to  the  original game's installed data files, relative to GamePath.  Usually
              it's portraits.

       GameScriptsPath=PATH
              Path to the original game's installed data files, relative  to  GamePath.   Usually
              it's scripts.

       GameSoundsPath=PATH
              Path  to  the  original game's installed data files, relative to GamePath.  Usually
              it's sounds.

       ModPath=PATH
              Path where GemRB looks for additional engine override files.   It  is  not  set  by
              default. This directory has precedence over GemRBOverridePath.

       CustomFontPath=PATH
              Path  where  GemRB looks for additional font files. It is meant to be used with the
              TTF font plugin and fonts.2da as a way to specify where to look for system or other
              external  fonts.  Check the online documentation for the details.  It is not set by
              default.

Input Parameters:

       DoubleClickDelay=INT
              Millisecond threshold for detecting a double click. The default is 250.

       RepeatKeyDelay=INT
              Millisecond threshold for detecting a repeated key press. The default is 250.

       UseSoftKeyboard=(0|1)
              Toggles use of software keyboard on devices that support one. It pops up when  text
              input is required. Disabled by default.

       NumFingScroll=(2|3|4)
              Number of fingers for multitouch to trigger scrolling. The default is 2.

       NumFingKboard=(2|3|4)
              Number  of  fingers for multitouch to open up the software keyboard. The default is
              3.  The value should not be equal to NumFingScroll above.

       NumFingInfo=(2|3|4)
              Number of fingers for multitouch to emulate a  special  keypress  (alt,  tab).  The
              default is 2.

       MouseFeedback=(0-3)
              Bitfield with reserved bits for disabling the mouse.
                Show mouse+tooltips = 0 (default)
                Hide mouse          = 1
                Hide tooltips       = 2
                Hide mouse+tooltips = 3

       TouchInput=(0-1)
              Override setting for when autodetection does not have satisfactory results.
                Autodetect         = -1 (default)
                Force disable      = 0
                Enable             = 1

Development parameters:

       EnableCheatKeys=(0|1)
              This  parameter  is  meant  for  developers. If set to 1, certain keys allow you to
              inspect the internal state of objects, do forbidden  things,  etc.   The  keys  are
              listed  in  the  CheatKeys.txt file. Do NOT use this option unless you want to make
              your hands dirty :-). The default is 0.

       DrawFPS=(0|1)
              This parameter is meant for developers. If set to 1, the current  FPS  (Frames  per
              Second) value is drawn in the top left window corner. The default is 0.

       DebugMode=(n)
              This parameter is meant for developers. It is a combination of bit values

              1 - count references,

              2 - display cutscene warnings,

              4 - display variable warnings,

              8 - display action warnings,

              16 - display trigger warnings,

              32 - enable views debug mode,

              64 - enable window debug mode,

              128 - enable font debug mode,

              256 - enable text debug mode.

              The default is 0.

       DelayPlugin=FILENAME
              Named plugin will be loaded after other (nondelayed) plugins were loaded.  FILENAME
              is a name  without  path,  but  with  extension,  for  example  libNullSound.so  or
              libNullSound.dll.  You can use this parameter more than once.

       SkipPlugin=FILENAME
              Named  plugin  will  not  be  loaded.   FILENAME  is  a name without path, but with
              extension, for example libNullSound.so  or  libNullSound.dll.   You  can  use  this
              parameter more than once.

       SaveAsOriginal=(0|1)
              Set  this  parameter  to  1,  if you want to keep the save game compatible with the
              original engine. It is enabled by default.

       KeepCache=(0|1)
              Set this parameter to 1, if you want to keep the cache after exiting GemRB.  It  is
              disabled by default.

       IgnoreOriginalINI=(0|1)
              Set  this  parameter  to  1,  if  you want to ignore the settings from the original
              configuration files - baldur.ini / icewind.ini / torment.ini.  It  is  disabled  by
              default.

       GamepadPointerSpeed=INT
              Pointer movement speed with gamepads. The default is 10.

       VitaKeepAspectRatio=(0|1)
              If set to 1, original aspect ratio is preserved while game area is scaled to native
              PS Vita resolution. It is enabled by default.

FILES

       /etc/gemrb/gemrb.cfg
              system-wide configuration file

       /usr/share/gemrb/unhardcoded/
              directory with GemRB-distributed data files. These used  to  be  hardcoded  in  the
              original engine. The files are sorted into directories for specific games.

       /usr/share/gemrb/override/
              directory  with  GemRB-distributed data files. These files override their namesakes
              in the original data.

       /usr/share/gemrb/GUIScripts/
              directory with Python scripts providing GUI setup and interaction.  The  files  are
              sorted into directories for specific games.

       ~/.gemrb/gemrb.cfg
       ~/.gemrb/override/
       ~/.gemrb/GUIScripts/
              user's own configuration and data files.
       ~/.gemrb/cache/
              cache directory

BUGS

       Many.  GemRB is still in development stage and not complete.

       If  you  stumble  over  something  which is supposed to work but doesn't, file an issue at
       https://github.com/gemrb/gemrb or first visit the  official  IRC  channel  #GemRB  on  the
       FreeNode IRC network.

AUTHOR

       The GemRB Project development team at https://gemrb.org

COPYING

       Copyright (C) 2003-2021 The GemRB Project

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as  published  by  the  Free  Software  Foundation;  either
       version 2 of the License, or (at your option) any later version.

       This  program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc.,  51  Franklin  Street,  Fifth  Floor,
       Boston, MA 02110-1301, USA.

                                                                                         GEMRB(6)