Provided by: openssl_3.0.5-2ubuntu1_amd64 
NAME
OSSL_PROVIDER-FIPS - OpenSSL FIPS provider
DESCRIPTION
The OpenSSL FIPS provider is a special provider that conforms to the Federal Information
Processing Standards (FIPS) specified in FIPS 140-2. This 'module' contains an approved
set of cryptographic algorithms that is validated by an accredited testing laboratory.
Properties
The implementations in this provider specifically have these properties defined:
"provider=fips"
"fips=yes"
It may be used in a property query string with fetching functions such as EVP_MD_fetch(3)
or EVP_CIPHER_fetch(3), as well as with other functions that take a property query string,
such as EVP_PKEY_CTX_new_from_name(3).
It isn't mandatory to query for any of these properties, except to make sure to get
implementations of this provider and none other.
The "fips=yes" property can be use to make sure only FIPS approved implementations are
used for crypto operations. This may also include other non-crypto support operations
that are not in the FIPS provider, such as asymmetric key encoders, see "Asymmetric Key
Management" in OSSL_PROVIDER-default(7).
OPERATIONS AND ALGORITHMS
The OpenSSL FIPS provider supports these operations and algorithms:
Hashing Algorithms / Message Digests
SHA1, see EVP_MD-SHA1(7)
SHA2, see EVP_MD-SHA2(7)
SHA3, see EVP_MD-SHA3(7)
KECCAK-KMAC, see EVP_MD-KECCAK-KMAC(7)
Symmetric Ciphers
AES, see EVP_CIPHER-AES(7)
DES-EDE3 (TripleDES), see EVP_CIPHER-DES(7)
Message Authentication Code (MAC)
CMAC, see EVP_MAC-CMAC(7)
GMAC, see EVP_MAC-GMAC(7)
HMAC, see EVP_MAC-HMAC(7)
KMAC, see EVP_MAC-KMAC(7)
Key Derivation Function (KDF)
HKDF, see EVP_KDF-HKDF(7)
TLS13-KDF, see EVP_KDF-TLS13_KDF(7)
SSKDF, see EVP_KDF-SSKDF(7)
PBKDF2, see EVP_KDF-PBKDF2(7)
SSHKDF, see EVP_KDF-SSHKDF(7)
TLS1-PRF, see EVP_KDF-TLS1_PRF(7)
KBKDF, see EVP_KDF-KBKDF(7)
X942KDF-ASN1, see EVP_KDF-X942-ASN1(7)
X942KDF-CONCAT, see EVP_KDF-X942-CONCAT(7)
X963KDF, see EVP_KDF-X963(7)
Key Exchange
DH, see EVP_KEYEXCH-DH(7)
ECDH, see EVP_KEYEXCH-ECDH(7)
X25519, see EVP_KEYEXCH-X25519(7)
X448, see EVP_KEYEXCH-X448(7)
Asymmetric Signature
DSA, see EVP_KEYEXCH-DSA(7)
RSA, see EVP_SIGNATURE-RSA(7)
X25519, see EVP_SIGNATURE-ED25519(7)
X448, see EVP_SIGNATURE-ED448(7)
HMAC, see EVP_SIGNATURE-HMAC(7)
CMAC, see EVP_SIGNATURE-CMAC(7)
Asymmetric Cipher
RSA, see EVP_KEYEXCH-RSA(7)
Asymmetric Key Encapsulation
RSA, see EVP_KEM-RSA(7)
Asymmetric Key Management
DH, see EVP_KEYMGMT-DH(7)
DHX, see EVP_KEYMGMT-DHX(7)
DSA, see EVP_KEYMGMT-DSA(7)
RSA, see EVP_KEYMGMT-RSA(7)
EC, see EVP_KEYMGMT-EC(7)
X25519, see EVP_KEYMGMT-X25519(7)
X448, see EVP_KEYMGMT-X448(7)
SELF TESTING
One of the requirements for the FIPS module is self testing. An optional callback
mechanism is available to return information to the user using
OSSL_SELF_TEST_set_callback(3).
The parameters passed to the callback are described in OSSL_SELF_TEST_new(3)
The OpenSSL FIPS module uses the following mechanism to provide information about the self
tests as they run. This is useful for debugging if a self test is failing. The callback
also allows forcing any self test to fail, in order to check that it operates correctly on
failure. Note that all self tests run even if a self test failure occurs.
The FIPS module passes the following type(s) to OSSL_SELF_TEST_onbegin().
"Module_Integrity" (OSSL_SELF_TEST_TYPE_MODULE_INTEGRITY)
Uses HMAC SHA256 on the module file to validate that the module has not been modified.
The integrity value is compared to a value written to a configuration file during
installation.
"Install_Integrity" (OSSL_SELF_TEST_TYPE_INSTALL_INTEGRITY)
Uses HMAC SHA256 on a fixed string to validate that the installation process has
already been performed and the self test KATS have already been tested, The integrity
value is compared to a value written to a configuration file after successfully
running the self tests during installation.
"KAT_Cipher" (OSSL_SELF_TEST_TYPE_KAT_CIPHER)
Known answer test for a symmetric cipher.
"KAT_AsymmetricCipher" (OSSL_SELF_TEST_TYPE_KAT_ASYM_CIPHER)
Known answer test for a asymmetric cipher.
"KAT_Digest" (OSSL_SELF_TEST_TYPE_KAT_DIGEST)
Known answer test for a digest.
"KAT_Signature" (OSSL_SELF_TEST_TYPE_KAT_SIGNATURE)
Known answer test for a signature.
"PCT_Signature" (OSSL_SELF_TEST_TYPE_PCT_SIGNATURE)
Pairwise Consistency check for a signature.
"KAT_KDF" (OSSL_SELF_TEST_TYPE_KAT_KDF)
Known answer test for a key derivation function.
"KAT_KA" (OSSL_SELF_TEST_TYPE_KAT_KA)
Known answer test for key agreement.
"DRBG" (OSSL_SELF_TEST_TYPE_DRBG)
Known answer test for a Deterministic Random Bit Generator.
"Conditional_PCT" (OSSL_SELF_TEST_TYPE_PCT)
Conditional test that is run during the generation of key pairs.
"Continuous_RNG_Test" (OSSL_SELF_TEST_TYPE_CRNG)
Continuous random number generator test.
The "Module_Integrity" self test is always run at startup. The "Install_Integrity" self
test is used to check if the self tests have already been run at installation time. If
they have already run then the self tests are not run on subsequent startups. All other
self test categories are run once at installation time, except for the
"Pairwise_Consistency_Test".
There is only one instance of the "Module_Integrity" and "Install_Integrity" self tests.
All other self tests may have multiple instances.
The FIPS module passes the following descriptions(s) to OSSL_SELF_TEST_onbegin().
"HMAC" (OSSL_SELF_TEST_DESC_INTEGRITY_HMAC)
"Module_Integrity" and "Install_Integrity" use this.
"RSA" (OSSL_SELF_TEST_DESC_PCT_RSA_PKCS1)
"ECDSA" (OSSL_SELF_TEST_DESC_PCT_ECDSA)
"DSA" (OSSL_SELF_TEST_DESC_PCT_DSA)
Key generation tests used with the "Pairwise_Consistency_Test" type.
"RSA_Encrypt" (OSSL_SELF_TEST_DESC_ASYM_RSA_ENC)
"RSA_Decrypt" (OSSL_SELF_TEST_DESC_ASYM_RSA_DEC)
"KAT_AsymmetricCipher" uses this to indicate an encrypt or decrypt KAT.
"AES_GCM" (OSSL_SELF_TEST_DESC_CIPHER_AES_GCM)
"AES_ECB_Decrypt" (OSSL_SELF_TEST_DESC_CIPHER_AES_ECB)
"TDES" (OSSL_SELF_TEST_DESC_CIPHER_TDES)
Symmetric cipher tests used with the "KAT_Cipher" type.
"SHA1" (OSSL_SELF_TEST_DESC_MD_SHA1)
"SHA2" (OSSL_SELF_TEST_DESC_MD_SHA2)
"SHA3" (OSSL_SELF_TEST_DESC_MD_SHA3)
Digest tests used with the "KAT_Digest" type.
"DSA" (OSSL_SELF_TEST_DESC_SIGN_DSA)
"RSA" (OSSL_SELF_TEST_DESC_SIGN_RSA)
"ECDSA" (OSSL_SELF_TEST_DESC_SIGN_ECDSA)
Signature tests used with the "KAT_Signature" type.
"ECDH" (OSSL_SELF_TEST_DESC_KA_ECDH)
"DH" (OSSL_SELF_TEST_DESC_KA_DH)
Key agreement tests used with the "KAT_KA" type.
"HKDF" (OSSL_SELF_TEST_DESC_KDF_HKDF)
"TLS13_KDF_EXTRACT" (OSSL_SELF_TEST_DESC_KDF_TLS13_EXTRACT)
"TLS13_KDF_EXPAND" (OSSL_SELF_TEST_DESC_KDF_TLS13_EXPAND)
"SSKDF" (OSSL_SELF_TEST_DESC_KDF_SSKDF)
"X963KDF" (OSSL_SELF_TEST_DESC_KDF_X963KDF)
"X942KDF" (OSSL_SELF_TEST_DESC_KDF_X942KDF)
"PBKDF2" (OSSL_SELF_TEST_DESC_KDF_PBKDF2)
"SSHKDF" (OSSL_SELF_TEST_DESC_KDF_SSHKDF)
"TLS12_PRF" (OSSL_SELF_TEST_DESC_KDF_TLS12_PRF)
"KBKDF" (OSSL_SELF_TEST_DESC_KDF_KBKDF)
Key Derivation Function tests used with the "KAT_KDF" type.
"CTR" (OSSL_SELF_TEST_DESC_DRBG_CTR)
"HASH" (OSSL_SELF_TEST_DESC_DRBG_HASH)
"HMAC" (OSSL_SELF_TEST_DESC_DRBG_HMAC)
DRBG tests used with the "DRBG" type.
= item "RNG" (OSSL_SELF_TEST_DESC_RNG)
"Continuous_RNG_Test" uses this.
EXAMPLES
A simple self test callback is shown below for illustrative purposes.
#include <openssl/self_test.h>
static OSSL_CALLBACK self_test_cb;
static int self_test_cb(const OSSL_PARAM params[], void *arg)
{
int ret = 0;
const OSSL_PARAM *p = NULL;
const char *phase = NULL, *type = NULL, *desc = NULL;
p = OSSL_PARAM_locate_const(params, OSSL_PROV_PARAM_SELF_TEST_PHASE);
if (p == NULL || p->data_type != OSSL_PARAM_UTF8_STRING)
goto err;
phase = (const char *)p->data;
p = OSSL_PARAM_locate_const(params, OSSL_PROV_PARAM_SELF_TEST_DESC);
if (p == NULL || p->data_type != OSSL_PARAM_UTF8_STRING)
goto err;
desc = (const char *)p->data;
p = OSSL_PARAM_locate_const(params, OSSL_PROV_PARAM_SELF_TEST_TYPE);
if (p == NULL || p->data_type != OSSL_PARAM_UTF8_STRING)
goto err;
type = (const char *)p->data;
/* Do some logging */
if (strcmp(phase, OSSL_SELF_TEST_PHASE_START) == 0)
BIO_printf(bio_out, "%s : (%s) : ", desc, type);
if (strcmp(phase, OSSL_SELF_TEST_PHASE_PASS) == 0
|| strcmp(phase, OSSL_SELF_TEST_PHASE_FAIL) == 0)
BIO_printf(bio_out, "%s\n", phase);
/* Corrupt the SHA1 self test during the 'corrupt' phase by returning 0 */
if (strcmp(phase, OSSL_SELF_TEST_PHASE_CORRUPT) == 0
&& strcmp(desc, OSSL_SELF_TEST_DESC_MD_SHA1) == 0) {
BIO_printf(bio_out, "%s %s", phase, desc);
return 0;
}
ret = 1;
err:
return ret;
}
SEE ALSO
openssl-fipsinstall(1), fips_config(5), OSSL_SELF_TEST_set_callback(3),
OSSL_SELF_TEST_new(3), OSSL_PARAM(3), openssl-core.h(7), openssl-core_dispatch.h(7),
provider(7)
HISTORY
The type and functions described here were added in OpenSSL 3.0.
COPYRIGHT
Copyright 2019-2022 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except
in compliance with the License. You can obtain a copy in the file LICENSE in the source
distribution or at <https://www.openssl.org/source/license.html>.