Provided by: golang-go_1.19~1_amd64 
NAME
go - tool for managing Go source code
DESCRIPTION
The ‘go test’ command takes both flags that apply to ‘go test’ itself and flags that apply
to the resulting test binary.
Several of the flags control profiling and write an execution profile suitable for "go
tool pprof"; run "go tool pprof -h" for more information. The --alloc_space,
--alloc_objects, and --show_bytes options of pprof control how the information is
presented.
The following flags are recognized by the ‘go test’ command and control the execution of
any test:
-bench regexp
Run only those benchmarks matching a regular expression. By default, no benchmarks
are run. To run all benchmarks, use ‘-bench .’ or ‘-bench=.’. The regular
expression is split by unbracketed slash (/) characters into a sequence of regular
expressions, and each part of a benchmark’s identifier must match the corresponding
element in the sequence, if any. Possible parents of matches are run with b.N=1 to
identify sub-benchmarks. For example, given -bench=X/Y, top-level benchmarks
matching X are run with b.N=1 to find any sub-benchmarks matching Y, which are then
run in full.
-benchtime t
Run enough iterations of each benchmark to take t, specified as a time.Duration
(for example, -benchtime 1h30s).
The default is 1 second (1s).
The special syntax Nx means to run the benchmark N times (for example, -benchtime
100x).
-count n
Run each test, benchmark, and fuzz seed n times (default 1).
If -cpu is set, run n times for each GOMAXPROCS value.
Examples are always run once. -count does not apply to fuzz tests matched by -fuzz.
-cover Enable coverage analysis.
Note that because coverage works by annotating the source code before compilation,
compilation and test failures with coverage enabled may report line numbers that
don’t correspond to the original sources.
-covermode set,count,atomic
Set the mode for coverage analysis for the package[s] being tested. The default is
"set" unless -race is enabled, in which case it is "atomic".
The values:
set: bool: does this statement run?
count: int: how many times does this statement run?
atomic: int: count, but correct in multithreaded tests;
significantly more expensive.
Sets -cover.
-coverpkg pattern1,pattern2,pattern3
Apply coverage analysis in each test to packages matching the patterns. The
default is for each test to analyze only the package being tested.
See ‘go help packages’ for a description of package patterns.
Sets -cover.
-cpu 1,2,4
Specify a list of GOMAXPROCS values for which the tests, benchmarks or fuzz tests
should be executed. The default is the current value of GOMAXPROCS. -cpu does not
apply to fuzz tests matched by -fuzz.
-failfast
Do not start new tests after the first test failure.
-fuzz regexp
Run the fuzz test matching the regular expression. When specified, the command line
argument must match exactly one package within the main module, and regexp must
match exactly one fuzz test within that package. Fuzzing will occur after tests,
benchmarks, seed corpora of other fuzz tests, and examples have completed. See the
Fuzzing section of the testing package documentation for details.
-fuzztime t
Run enough iterations of the fuzz target during fuzzing to take t, specified as a
time.Duration (for example, -fuzztime 1h30s).
The default is to run forever.
The special syntax Nx means to run the fuzz target N times (for example, -fuzztime
1000x).
-fuzzminimizetime t
Run enough iterations of the fuzz target during each minimization attempt to take
t, as specified as a time.Duration (for example, -fuzzminimizetime 30s).
The default is 60s.
The special syntax Nx means to run the fuzz target N times (for example,
-fuzzminimizetime 100x).
-json Log verbose output and test results in JSON. This presents the same information as
the -v flag in a machine-readable format.
-list regexp
List tests, benchmarks, fuzz tests, or examples matching the regular expression. No
tests, benchmarks, fuzz tests, or examples will be run. This will only list top-
level tests. No subtest or subbenchmarks will be shown.
-parallel n
Allow parallel execution of test functions that call t.Parallel, and fuzz targets
that call t.Parallel when running the seed corpus. The value of this flag is the
maximum number of tests to run simultaneously.
While fuzzing, the value of this flag is the maximum number of subprocesses that
may call the fuzz function simultaneously, regardless of whether T.Parallel is
called.
By default, -parallel is set to the value of GOMAXPROCS. Setting -parallel to
values higher than GOMAXPROCS may cause degraded performance due to CPU contention,
especially when fuzzing. Note that -parallel only applies within a single test
binary. The ‘go test’ command may run tests for different packages in parallel as
well, according to the setting of the -p flag (see ‘go help build’).
-run regexp
Run only those tests, examples, and fuzz tests matching the regular expression. For
tests, the regular expression is split by unbracketed slash (/) characters into a
sequence of regular expressions, and each part of a test’s identifier must match
the corresponding element in the sequence, if any. Note that possible parents of
matches are run too, so that -run=X/Y matches and runs and reports the result of
all tests matching X, even those without sub-tests matching Y, because it must run
them to look for those sub-tests.
-short Tell long-running tests to shorten their run time. It is off by default but set
during all.bash so that installing the Go tree can run a sanity check but not spend
time running exhaustive tests.
-shuffle off,on,N
Randomize the execution order of tests and benchmarks. It is off by default. If
-shuffle is set to on, then it will seed the randomizer using the system clock. If
-shuffle is set to an integer N, then N will be used as the seed value. In both
cases, the seed will be reported for reproducibility.
-timeout d
If a test binary runs longer than duration d, panic.
If d is 0, the timeout is disabled.
The default is 10 minutes (10m).
-v Verbose output: log all tests as they are run. Also print all text from Log and
Logf calls even if the test succeeds.
-vet list
Configure the invocation of "go vet" during "go test" to use the comma-separated
list of vet checks.
If list is empty, "go test" runs "go vet" with a curated list of checks believed to
be always worth addressing.
If list is "off", "go test" does not run "go vet" at all.
The following flags are also recognized by ‘go test’ and can be used to profile the tests
during execution:
-benchmem
Print memory allocation statistics for benchmarks.
-blockprofile block.out
Write a goroutine blocking profile to the specified file when all tests are
complete.
Writes test binary as -c would.
-blockprofilerate n
Control the detail provided in goroutine blocking profiles by calling
runtime.SetBlockProfileRate with n.
See ‘go doc runtime.SetBlockProfileRate’.
The profiler aims to sample, on average, one blocking event every n nanoseconds the
program spends blocked. By default, if -test.blockprofile is set without this flag,
all blocking events are recorded, equivalent to -test.blockprofilerate=1.
-coverprofile cover.out
Write a coverage profile to the file after all tests have passed.
Sets -cover.
-cpuprofile cpu.out
Write a CPU profile to the specified file before exiting.
Writes test binary as -c would.
-memprofile mem.out
Write an allocation profile to the file after all tests have passed.
Writes test binary as -c would.
-memprofilerate n
Enable more precise (and expensive) memory allocation profiles by setting
runtime.MemProfileRate. See ‘go doc runtime.MemProfileRate’. To profile all memory
allocations, use -test.memprofilerate=1.
-mutexprofile mutex.out
Write a mutex contention profile to the specified file when all tests are complete.
Writes test binary as -c would.
-mutexprofilefraction n
Sample 1 in n stack traces of goroutines holding a contended mutex.
-outputdir directory
Place output files from profiling in the specified directory, by default the
directory in which "go test" is running.
-trace trace.out
Write an execution trace to the specified file before exiting.
Each of these flags is also recognized with an optional ‘test.’ prefix, as in -test.v.
When invoking the generated test binary (the result of ‘go test -c’) directly, however,
the prefix is mandatory.
The ‘go test’ command rewrites or removes recognized flags, as appropriate, both before
and after the optional package list, before invoking the test binary.
For instance, the command
go test -v -myflag testdata -cpuprofile=prof.out -x
will compile the test binary and then run it as
pkg.test -test.v -myflag testdata -test.cpuprofile=prof.out
(The -x flag is removed because it applies only to the go command’s execution, not to the
test itself.)
The test flags that generate profiles (other than for coverage) also leave the test binary
in pkg.test for use when analyzing the profiles.
When ‘go test’ runs a test binary, it does so from within the corresponding package’s
source code directory. Depending on the test, it may be necessary to do the same when
invoking a generated test binary directly. Because that directory may be located within
the module cache, which may be read-only and is verified by checksums, the test must not
write to it or any other directory within the module unless explicitly requested by the
user (such as with the -fuzz flag, which writes failures to testdata/fuzz).
The command-line package list, if present, must appear before any flag not known to the go
test command. Continuing the example above, the package list would have to appear before
-myflag, but could appear on either side of -v.
When ‘go test’ runs in package list mode, ‘go test’ caches successful package test results
to avoid unnecessary repeated running of tests. To disable test caching, use any test flag
or argument other than the cacheable flags. The idiomatic way to disable test caching
explicitly is to use -count=1.
To keep an argument for a test binary from being interpreted as a known flag or a package
name, use -args (see ‘go help test’) which passes the remainder of the command line
through to the test binary uninterpreted and unaltered.
For instance, the command
go test -v -args -x -v
will compile the test binary and then run it as
pkg.test -test.v -x -v
Similarly,
go test -args math
will compile the test binary and then run it as
pkg.test math
In the first example, the -x and the second -v are passed through to the test binary
unchanged and with no effect on the go command itself. In the second example, the
argument math is passed through to the test binary, instead of being interpreted as the
package list.
AUTHOR
This manual page was written by Michael Stapelberg <stapelberg@debian.org> and is
maintained by the Debian Go Compiler Team <team+go-compiler@tracker.debian.org> based on
the output of ‘go help testflag’ for the Debian project (and may be used by others).
2022-03-15 GO-TESTFLAG(7)