Provided by: librpmem-dev_1.12.0-2_amd64 bug

NAME

       librpmem - remote persistent memory support library (DEPRECATED)

SYNOPSIS

              #include <librpmem.h>
              cc ... -lrpmem

   Library API versioning:
              const char *rpmem_check_version(
                  unsigned major_required,
                  unsigned minor_required);

   Error handling:
              const char *rpmem_errormsg(void);

   Other library functions:
       A description of other librpmem functions can be found on the following manual pages:

       • rpmem_create(3), rpmem_persist(3)

DESCRIPTION

       librpmem  provides  low-level  support  for  remote  access  to  persistent  memory (pmem)
       utilizing RDMA-capable RNICs.  The library can be used  to  remotely  replicate  a  memory
       region  over the RDMA protocol.  It utilizes an appropriate persistency mechanism based on
       the  remote  node's  platform  capabilities.   librpmem  utilizes  the  ssh(1)  client  to
       authenticate a user on the remote node, and for encryption of the connection's out-of-band
       configuration data.  See SSH, below, for details.

       The  maximum  replicated  memory  region  size  can  not  be  bigger  than   the   maximum
       locked-in-memory address space limit.  See memlock in limits.conf(5) for more details.

       This  library  is for applications that use remote persistent memory directly, without the
       help of any library-supplied transactions or memory  allocation.   Higher-level  libraries
       that build on libpmem(7) are available and are recommended for most applications, see:

       • libpmemobj(7),  a  general  use  persistent  memory API, providing memory allocation and
         transactional operations on variable-sized objects.

TARGET NODE ADDRESS FORMAT

              [<user>@]<hostname>[:<port>]

       The target node address is described by the hostname which the client connects to, with an
       optional  user  name.   The  user must be authorized to authenticate to the remote machine
       without querying for password/passphrase.  The optional port number is used  to  establish
       the SSH connection.  The default port number is 22.

REMOTE POOL ATTRIBUTES

       The  rpmem_pool_attr  structure  describes  a  remote  pool and is stored in remote pool's
       metadata.  This structure must be passed to the rpmem_create(3) function  by  caller  when
       creating  a  pool  on remote node.  When opening the pool using rpmem_open(3) function the
       appropriate fields are read from pool's metadata and returned back to the caller.

              #define RPMEM_POOL_HDR_SIG_LEN    8
              #define RPMEM_POOL_HDR_UUID_LEN   16
              #define RPMEM_POOL_USER_FLAGS_LEN 16

              struct rpmem_pool_attr {
                  char signature[RPMEM_POOL_HDR_SIG_LEN];
                  uint32_t major;
                  uint32_t compat_features;
                  uint32_t incompat_features;
                  uint32_t ro_compat_features;
                  unsigned char poolset_uuid[RPMEM_POOL_HDR_UUID_LEN];
                  unsigned char uuid[RPMEM_POOL_HDR_UUID_LEN];
                  unsigned char next_uuid[RPMEM_POOL_HDR_UUID_LEN];
                  unsigned char prev_uuid[RPMEM_POOL_HDR_UUID_LEN];
                  unsigned char user_flags[RPMEM_POOL_USER_FLAGS_LEN];
              };

       The signature field is an 8-byte field which describes the pool's on-media format.

       The major field is a major version number of the pool's on-media format.

       The compat_features field is a mask describing compatibility  of  pool's  on-media  format
       optional features.

       The  incompat_features  field is a mask describing compatibility of pool's on-media format
       required features.

       The ro_compat_features field is a mask describing compatibility of pool's on-media  format
       features.   If  these  features  are  not available, the pool shall be opened in read-only
       mode.

       The poolset_uuid field is an UUID of the pool which the remote pool is associated with.

       The uuid field is an UUID of a first part of the remote pool.  This field can be  used  to
       connect the remote pool with other pools in a list.

       The  next_uuid  and prev_uuid fields are UUIDs of next and previous replicas respectively.
       These fields can be used to connect the remote pool with other pools in a list.

       The user_flags field is a 16-byte user-defined flags.

SSH

       librpmem utilizes the ssh(1) client to login and execute  the  rpmemd(1)  process  on  the
       remote  node.   By default, ssh(1) is executed with the -4 option, which forces using IPv4
       addressing.

       For debugging purposes, both the ssh client and the commands executed on the  remote  node
       may   be  overridden  by  setting  the  RPMEM_SSH  and  RPMEM_CMD  environment  variables,
       respectively.  See ENVIRONMENT for details.

FORK

       The ssh(1) client is executed by rpmem_open(3) and rpmem_create(3) after forking  a  child
       process using fork(2).  The application must take this into account when using wait(2) and
       waitpid(2), which may return the PID of the ssh(1) process executed by librpmem.

       If fork(2) support is not enabled in libibverbs, rpmem_open(3)  and  rpmem_create(3)  will
       fail.   By  default,  fabric(7) initializes libibverbs with fork(2) support by calling the
       ibv_fork_init(3) function.  See fi_verbs(7) for more details.

CAVEATS

       librpmem relies on the library destructor being called from the  main  thread.   For  this
       reason,  all  functions that might trigger destruction (e.g.  dlclose(3)) should be called
       in the main thread.  Otherwise some of the resources associated with that thread might not
       be cleaned up properly.

       librpmem registers a pool as a single memory region.  A Chelsio T4 and T5 hardware can not
       handle a memory region greater than or equal to 8GB due to a hardware bug.   So  pool_size
       value for rpmem_create(3) and rpmem_open(3) using this hardware can not be greater than or
       equal to 8GB.

LIBRARY API VERSIONING

       This section describes how the library API is versioned,  allowing  applications  to  work
       with an evolving API.

       The  rpmem_check_version()  function is used to see if the installed librpmem supports the
       version of the library API required by an application.  The easiest way to do this is  for
       the  application  to  supply  the compile-time version information, supplied by defines in
       <librpmem.h>, like this:

              reason = rpmem_check_version(RPMEM_MAJOR_VERSION,
                                           RPMEM_MINOR_VERSION);
              if (reason != NULL) {
                  /* version check failed, reason string tells you why */
              }

       Any mismatch in the major version number is considered a failure, but  a  library  with  a
       newer  minor  version  number  will  pass this check since increasing minor versions imply
       backwards compatibility.

       An application can also check specifically for the existence of an interface  by  checking
       for  the  version  where  that interface was introduced.  These versions are documented in
       this man page as follows: unless otherwise specified, all interfaces  described  here  are
       available  in version 1.0 of the library.  Interfaces added after version 1.0 will contain
       the text introduced in version x.y in the section of this manual describing the feature.

       When the version check performed by rpmem_check_version() is successful, the return  value
       is  NULL.  Otherwise the return value is a static string describing the reason for failing
       the version check.  The string returned by rpmem_check_version() must not be  modified  or
       freed.

ENVIRONMENT

       librpmem  can  change  its  default behavior based on the following environment variables.
       These are largely intended for testing and are not normally required.

       • RPMEM_SSH=ssh_client

       Setting this environment variable overrides the default ssh(1) client command name.

       • RPMEM_CMD=cmd

       Setting this environment variable overrides the default command  executed  on  the  remote
       node using either ssh(1) or the alternative remote shell command specified by RPMEM_SSH.

       RPMEM_CMD can contain multiple commands separated by a vertical bar (|).  Each consecutive
       command is executed on the remote  node  in  order  read  from  a  pool  set  file.   This
       environment  variable  is  read  when the library is initialized, so RPMEM_CMD must be set
       prior to application launch (or prior  to  dlopen(3)  if  librpmem  is  being  dynamically
       loaded).

       • RPMEM_ENABLE_SOCKETS=0|1

       Setting  this  variable  to  1  enables  using  fi_sockets(7)  provider  for  in-band RDMA
       connection.  The sockets provider does not support IPv6.  It is required to  disable  IPv6
       system  wide  if  RPMEM_ENABLE_SOCKETS == 1 and target == localhost (or any other loopback
       interface address) and SSH_CONNECTION variable (see ssh(1) for more details) contains IPv6
       address after ssh to loopback interface.  By default the sockets provider is disabled.

       • RPMEM_ENABLE_VERBS=0|1

       Setting  this  variable  to  0  disables  using  fi_verbs(7)  provider  for  in-band  RDMA
       connection.  The verbs provider is enabled by default.

       • RPMEM_MAX_NLANES=num

       Limit the maximum number of lanes to num.  See LANES, in rpmem_create(3), for details.

       • RPMEM_WORK_QUEUE_SIZE=size

       Suggest the work queue size.  The effective work queue size can be greater than  suggested
       if  librpmem  requires it or it can be smaller if underlying hardware does not support the
       suggested size.  The work queue size affects  the  performance  of  communication  to  the
       remote  node.   rpmem_flush(3) operations can be added to the work queue up to the size of
       this queue.  When work queue is full any subsequent call has to wait till the  work  queue
       will  be  drained.   rpmem_drain(3) and rpmem_persist(3) among other things also drain the
       work queue.

DEBUGGING AND ERROR HANDLING

       If an error is detected during the call  to  a  librpmem  function,  the  application  may
       retrieve  an  error  message  describing the reason for the failure from rpmem_errormsg().
       This function returns a pointer to a static  buffer  containing  the  last  error  message
       logged  for  the  current  thread.   If  errno  was  set,  the error message may include a
       description of the corresponding error code as returned by strerror(3).  The error message
       buffer  is thread-local; errors encountered in one thread do not affect its value in other
       threads.  The buffer is never cleared by any library function; its content is  significant
       only  when  the  return  value  of  the  immediately preceding call to a librpmem function
       indicated an error, or if errno was set.  The application must  not  modify  or  free  the
       error  message  string,  but  it  may  be  modified  by  subsequent calls to other library
       functions.

       Two versions of librpmem are typically available on  a  development  system.   The  normal
       version,  accessed  when  a  program  is linked using the -lrpmem option, is optimized for
       performance.  That version skips checks that impact performance and never logs  any  trace
       information or performs any run-time assertions.

       A  second  version  of  librpmem,  accessed  when  a  program  uses  the  libraries  under
       /usr/lib/pmdk_debug, contains run-time assertions and trace points.  The  typical  way  to
       access   the  debug  version  is  to  set  the  environment  variable  LD_LIBRARY_PATH  to
       /usr/lib/pmdk_debug  or  /usr/lib64/pmdk_debug,  as  appropriate.   Debugging  output   is
       controlled  using  the following environment variables.  These variables have no effect on
       the non-debug version of the library.

              NOTE: On Debian/Ubuntu systems, this extra debug version of the library is  shipped
              in  the respective -debug Debian package and placed in the /usr/lib/$ARCH/pmdk_dbg/
              directory.

       • RPMEM_LOG_LEVEL

       The value of RPMEM_LOG_LEVEL enables trace points in the debug version of the library,  as
       follows:

       • 0  -  This  is  the  default level when RPMEM_LOG_LEVEL is not set.  No log messages are
         emitted at this level.

       • 1 - Additional details on any errors detected are logged (in addition to  returning  the
         errno-based   errors   as   usual).    The  same  information  may  be  retrieved  using
         rpmem_errormsg().

       • 2 - A trace of basic operations is logged.

       • 3 - Enables a very verbose amount of function call tracing in the library.

       • 4 - Enables voluminous and fairly obscure tracing information that is likely only useful
         to the librpmem developers.

       Unless RPMEM_LOG_FILE is set, debugging output is written to stderr.

       • RPMEM_LOG_FILE

       Specifies the name of a file where all logging information should be written.  If the last
       character in the name is “-”, the PID of the current process will be appended to the  file
       name  when  the  log  file  is  created.   If RPMEM_LOG_FILE is not set, logging output is
       written to stderr.

EXAMPLE

       The following example uses  librpmem  to  create  a  remote  pool  on  given  target  node
       identified  by  given  pool  set name.  The associated local memory pool is zeroed and the
       data is made persistent on remote node.  Upon success the remote pool is closed.

              #include <assert.h>
              #include <unistd.h>
              #include <stdio.h>
              #include <stdlib.h>
              #include <string.h>

              #include <librpmem.h>

              #define POOL_SIGNATURE  "MANPAGE"
              #define POOL_SIZE   (32 * 1024 * 1024)
              #define NLANES      4

              #define DATA_OFF    4096
              #define DATA_SIZE   (POOL_SIZE - DATA_OFF)

              static void
              parse_args(int argc, char *argv[], const char **target, const char **poolset)
              {
                  if (argc < 3) {
                      fprintf(stderr, "usage:\t%s <target> <poolset>\n", argv[0]);
                      exit(1);
                  }

                  *target = argv[1];
                  *poolset = argv[2];
              }

              static void *
              alloc_memory()
              {
                  long pagesize = sysconf(_SC_PAGESIZE);
                  if (pagesize < 0) {
                      perror("sysconf");
                      exit(1);
                  }

                  /* allocate a page size aligned local memory pool */
                  void *mem;
                  int ret = posix_memalign(&mem, pagesize, POOL_SIZE);
                  if (ret) {
                      fprintf(stderr, "posix_memalign: %s\n", strerror(ret));
                      exit(1);
                  }

                  assert(mem != NULL);

                  return mem;
              }

              int
              main(int argc, char *argv[])
              {
                  const char *target, *poolset;
                  parse_args(argc, argv, &target, &poolset);

                  unsigned nlanes = NLANES;
                  void *pool = alloc_memory();
                  int ret;

                  /* fill pool_attributes */
                  struct rpmem_pool_attr pool_attr;
                  memset(&pool_attr, 0, sizeof(pool_attr));
                  strncpy(pool_attr.signature, POOL_SIGNATURE, RPMEM_POOL_HDR_SIG_LEN);

                  /* create a remote pool */
                  RPMEMpool *rpp = rpmem_create(target, poolset, pool, POOL_SIZE,
                          &nlanes, &pool_attr);
                  if (!rpp) {
                      fprintf(stderr, "rpmem_create: %s\n", rpmem_errormsg());
                      return 1;
                  }

                  /* store data on local pool */
                  memset(pool, 0, POOL_SIZE);

                  /* make local data persistent on remote node */
                  ret = rpmem_persist(rpp, DATA_OFF, DATA_SIZE, 0, 0);
                  if (ret) {
                      fprintf(stderr, "rpmem_persist: %s\n", rpmem_errormsg());
                      return 1;
                  }

                  /* close the remote pool */
                  ret = rpmem_close(rpp);
                  if (ret) {
                      fprintf(stderr, "rpmem_close: %s\n", rpmem_errormsg());
                      return 1;
                  }

                  free(pool);

                  return 0;
              }

NOTE

       The librpmem API is experimental and may be subject to change  in  the  future.   However,
       using  the  remote replication in libpmemobj(7) is safe and backward compatibility will be
       preserved.

              NOTICE: The librpmem library is deprecated since PMDK 1.12  release.   If  you  are
              interested  in  a  remote persistent memory support please look at new library rpma
              https://github.com/pmem/rpma.

ACKNOWLEDGEMENTS

       librpmem builds on the persistent memory programming model recommended  by  the  SNIA  NVM
       Programming Technical Work Group: <https://snia.org/nvmp>

SEE ALSO

       rpmemd(1),  ssh(1),  fork(2),  dlclose(3),  dlopen(3),  ibv_fork_init(3), rpmem_create(3),
       rpmem_drain(3),    rpmem_flush(3),    rpmem_open(3),    rpmem_persist(3),     strerror(3),
       limits.conf(5),   fabric(7),   fi_sockets(7),   fi_verbs(7),   libpmem(7),  libpmemblk(7),
       libpmemlog(7), libpmemobj(7) and <https://pmem.io>