Provided by: yodl_4.03.03-1_amd64 bug

NAME

       yodlmacros - Macros for the Yodl converters

SYNOPSIS

       This manual page lists the standard macros of the Yodl package.

DESCRIPTION

       The following list shows the macros defined by the Yodl converters define and which can be
       used in Yodl documents. Refer to the Yodl user guide, distributed with the  Yodl  package,
       for a full description.

       The following list shows all macros of the package in alphabetical order.

       `abstract(text)’
              Defines  an  abstract  for an article or report type of document. Abstracts are not
              implemented for books or manpages. Must appear before starting the  document  using
              the `article’ or `report’ macro.

       `addntosymbol(symbol)(n)(text)’
              Adds  `text’ `n’ times to `symbol’. The value `n’ may also be the name of a defined
              counter (which is not modified).

       `affiliation(site)’
              Defines an affiliation, to appear in the document titlepage below the author field.
              Must  appear  before  starting the document with `article’, `report’ or `book’. The
              affiliation is only printed when the author field is not empty. When converting  to
              html  the  way  the  affiliation  is  displayed  can be tuned using CSS id selector
              specifications. The affiliation has `id="affiliation"’.

       `AfourEnlarged()’
              Enlarges the usable height of A4 paper by 2 cm.: the top margin is reduced by 2 cm.
              This  macro should be called in the preamble. The macro is available only for LaTeX
              conversions.

       `appendix()’
              Starts appendices

       `article(title)(author)(date)’
              Starts  an  article.  The  top-level  sectioning  command  is  `(n)sect’.  In  HTML
              conversions  only  one  output  file  is  written,  while  the way the headings are
              displayed can be  tuned  using  CSS  id  selector  specifications:  the  title  has
              `id="title"’, the author `id="author"’, and the date `id="date"’.)

       `attrib(text)’
              In  html,  pushes `text’ as an attribute for the next html tag supporting `attrib’.
              E.g, to set a blue color and 30 pixel left-hand side margin for a section use

                  attrib(style="color:blue;margin-left:30px;")\
                  sect(Section name)

              This results in the html markup

                  <h1 style="color:blue;margin-left:30px;">Section name</h1>

              This macro is only effective with html conversions. It is applied in  a  stack-wise
              fashion:  when  multiple `attrib’ calls are used, then the topmost attrib-string is
              added to the first macro calling the `attribinsert’ macro, with  subsequent  macros
              using subsequent elements on the attrib-stack.

              Commonly  used  attributes  are  `id="idname"’,  expecting a `#idname’ CSS label in
              either internal or external CSS specifications, or `style="spec"’ (as shown in  the
              example).

              Example: when using

                  attrib(width = "100" height = "100")
                  attrib(id = "#fig")
                  figure(imgfile)(Caption)(IMG)

              then  the  `#id’  attribute  is applied to `<figure>’, and the `width’ and `height’
              attributes are applied to `<img>’, which html markup is inserted  by  the  `figure’
              macro.

              The  `attrib’  macro  is  supported  by  the  following  predefined macros (between
              parentheses the number of attribute strings that are inserted by these  macros;  if
              only 1 attribute string is inserted no number is shown):

              `bf  cell  cells  center  chapter  code dashes dit em figure(3) file htmltag itdesc
              lchapter link  lref  lsect  lsubsect  lsubsubsect  nchapter  npart  nsect  nsubsect
              nsubsubsect  paragraph  part  quote  row  sc  sect  strong  subs subsect subsubsect
              subsubsubsect sups tableatt tbl tac tc tnac tnc tr  tt  ttbegin  url  verb  verborg
              verbinclude’.

       `attribclear()’
              Removes any existing contents from the attrib-stack. This macro is only active when
              converting to html

       `attribinsert()’
              In html, if the attrib-stack is  not  empty,  inserts  the  value  on  top  of  the
              attrib-stack  and  then  pops  the  topmost  value.   If the attrib-stack is empty,
              nothing happens.

       `bf(text)’
              Sets `text’ in boldface.

       `bind(text)’
              Generate a binding character (non-breaking space) after text.

       `book(title)(author)(date)’
              Starts a book document. The top-level sectioning command is `(n)chapter’, `(n)part’
              being  optional.  In  HTML output files are created for each chapter, while the way
              the headings are displayed can be tuned using CSS id selector  specifications:  the
              title has `id="title"’, the author `id="author"’, and the date `id="date"’.)

       `cell(contents)’
              Sets  a table cell, i.e., one element in a row. With the man/ms converters multiple
              blanks between `cell()’ macro calls are merged into a single blank character.

              Instead of using `cell’ in `table’, consider using `tc’ in `tbl’.

       `cells(nColumns)(contents)’
              Set a table cell over `nColumns’ columns. With LaTeX and xml the information in the
              combined cells is centered.

              With  man/ms  conversions  the `cells()’ macro simply calls the `cell()’ macro, but
              here the `setmanalign()’ macro can be used to determine the alignment  of  multiple
              cells.

              With  html  the  macro  `attrib’  can  be  used,  but  when  it  contains a `style’
              specification the macro’s default `style="text-align: center"’ is ignored  (but  it
              can optionally be specified using the `attrib’ macro).

              Instead of using `cells’ in `table’, consider using `tnc’ in `tbl’.

       `cellsline(from)(count)’
              Sets  a  horizontal line starting at column number `from’ over `count’ columns in a
              row. If `from’ is less then the number of columns already added to a row then it is
              ignored. This macro must be embedded in a `row’ macro defining a table row.  To put
              a line across the table’s full width use `rowline’. To set horizontal lines  across
              columns 1 until 2 and columns 4 until 5 table of a table use:

                  row(cellsline(1)(2)cellsline(4)(2))

              Combining  `cellsline’  and  `cell’  or `cells’ calls in one row produces undefined
              results.

              Instead of using `cellsline’ in `table’, consider using `tline’ in `tbl’.

       `center(text)’
              Centers `text’. Use `nl()’ in the text to break lines.  In html the `attrib’  macro
              is not supported, but a division (`div’) with style definition `text-align: center’
              is used. To center a table in html use  the  `tableatt’  macro.  If  a  `table’  or
              `tableatt’  macro  is used inside a `center’ macro then the contents of columns are
              column-wise centered.

              Inside a `center(...)’ context the counter `XXcenter’ is unequal 0.

       `chapter(title)’
              Starts a new chapter in books or reports.

       `cindex()’
              Generate an index entry for LaTex() or texinfo c-indices. Its argument is the index
              entry.  See also the `[fptv]index’ macro.

       `cite(text)’
              Sets `text’ as a citation or quotation

       `clearpage()’
              Starts  a new page, when the output format permits. Under HTML a horizontal line is
              drawn.

       `code(text)’
              Sets `text’ in code font, and prevents it  from  being  expanded.   For  unbalanced
              parameter lists, use `CHAR(40)’ to get `(’ and `CHAR(41)’ to get `)’.

       `columnline(from)(through)’
              Sets a horizontal line over some columns in a row. Note that `columnline’ defines a
              row by itself, consisting of just a horizontal line spanning some of  its  columns,
              rather  than  the  table’s  full width, like `rowline’. The two arguments represent
              column numbers. It is the responsibility of the author to make sure that the `from’
              and `through’ values are sensible. I.e.,

                  1 <= from <= through <= ncolumns

              To set a horizontal line in just one column select `through’ equal to `from’.

              Note:  this macro cannot be used if multiple lines must be set in one row. In those
              cases the macros `tline, tskip’, and `tendline’ should be used.

              Instead of using `columnline’ in `table’, consider using `tline’ in `tbl’.

       `dashes()’
              Inserts two dashes in teletype font, and prevents them from being expanded.

              In html the `attrib’ macro is recognized by the `<code>’ tag that is used to  embed
              the two dashes.

       `def(macroname)(nrofargs)(redefinition)’
              Defines  `macroname’  as  a  macro,  having  `nrofargs’ arguments, and expanding to
              `redefinition’. This macro is a shorthand for `DEFINEMACRO’. An error  occurs  when
              the macro is already defined. Use `redef()’ to unconditionally define or redefine a
              macro.

       `description(list)’
              Sets `list’ as a description list. Use `dit(item)’ to indicate items in the list.

       `dit(itemname)’
              Starts an item named `itemname’ in a description list. The list should be  used  in
              `description’ macros. With `html’ conversions the contents of a description item is
              separated from the item itself. The `dit’ macro only defines the item, and not  the
              description  itself.  This  macro  sets  the item in bold-face (`strong’ font). The
              macro `itdesc’, available since Yodl 3.05, can be used to defines an item  and  its
              description,  using  its suggested format (i.e., indenting the description relative
              to the item).

       `eit()’
              Indicates an item in an enumerated list. The `eit’  macro  should  be  used  as  an
              argument in `enumeration’ macros.

       `ellipsis()’
              Sets ellipsis (...).

       `em(text)’
              Sets `text’ as emphasized, usually italics.

       `email(address)’
              In  HTML,  this  macro  sets  the `address’ in a `<a href="mailto=..">’ locator. In
              other output formats, the `address’ is sent to the output. The `email’ macro  is  a
              special case of `url’.

       `enumeration(list)’
              `enumeration()’  starts  an  enumerated  list.  Use `eit()’ in the list to indicate
              items in the list.

       `euro()’
              Sets the euro currency symbol in latex, html, (and possibly sgml and xml).  In  all
              other   conversions   EUR   which   is   the  official  textual  abbreviation  (cf.
              http://ec.europa.eu/euro/entry.html)  is  written.  Note  that  LaTeX  may  require
              latexpackage()(eurosym).

       `evalsymbol(symbol)(expression)’
              Symbol  symbol  receives  the  value resulting from evaluating expression. E.g., if
              `sym’ is a defined symbol, then

                  evalsymbol(sym)(SUBSTR(hello world)(3)(2))

              assigns the value `lo’ to `sym’.

       `fig(label)’
              This macro is a shorthand  for  `figure  ref(label)’  and  just  makes  the  typing
              shorter,   as   in   `see   fig(schematic)  for  ..’  See  `getfigurestring()’  and
              `setfigurestring()’ for the `figure’ text.

       `figure(file)(caption)(label)’
              Sets the picture in  `file’  as  a  figure  in  the  current  document,  using  the
              descriptive  text `caption’. The `label’ is defined as a placeholder for the figure
              number and can be used in a corresponding `ref’ statement.  Note  that  the  `file’
              must be the filename without extension: By default, Yodl will supply `.gif’ when in
              HTML mode, or `.ps’ when in LaTeX mode. Figures in other modes may not (yet)  haven
              been implemented.

              When  converting  to  html, this macro uses three attribute-strings (if available).
              The string pushed first  using  an  attrib-call  defines  the  attributes  for  its
              `<figcaption>’  html-markup;  the string pushed next defines the attributes for its
              `<img>’ html-markup;  the  string  pushed  last  defines  the  attributes  for  its
              `<figure>’ html-markup. The `figure’ macro’s html output is organized like this:

                  <figure -attrib-string pushed last (if any)>
                      <img ... -attrib-string pushed last but one>
                      <figcaption -attrib-string pushed 2nd to last>
                          ...
                      </figcaption>
                  </figure>

              Starting  with  Yodl  3.07.00  no  `alt="Figure  #  is shown here..."’ attribute is
              defined anymore for the `img’ markup: an `alt’-attribute can easily be  defined  at
              the   last  attrib-call,  using  `getfigurestring()’  to  obtain  `Figure’  or  its
              language-specific translation, and `COUNTERVALUE(XXfigurecounter)’  to  obtain  the
              order-number of the figure shown in the next `figure’-macro call.

       `file(text)’
              Sets  `text’  as filename, usually boldface.  In html `attrib’ macro applies to the
              `<strong>’ tag.

       `findex()’
              Generate an index entry for LaTex() or texinfo f-indices. Its argument is the index
              entry.  See also the `[cptv]index’ macro.

       `footnote(text)’
              Sets  `text’  as a footnote, or between parentheses when the output format does not
              allow footnotes.

       `gagmacrowarning(name name ...)’
              Prevents the `yodl’ program from printing cannot expand possible user macro.  E.g.,
              if you have in your document `the file(s) are ..’ then you might want to put before
              that: `gagmacrowarning(file)’. Calls `NOUSERMACRO’.

       `getaffilstring()’
              Expands to the string that defines the name of Affiliation Information, by  default
              AFFILIATION  INFORMATION.  Can  be  redefined  for  national  language  support  by
              `setaffilstring()’. Currently, it is relevant only for txt.

       `getauthorstring()’
              Expands to the string that defines the  name  of  Author  Information,  by  default
              AUTHOR   INFORMATION.   Can   be   redefined   for  national  language  support  by
              `setauthorstring()’. Currently, it is relevant only for txt.

       `getchapterstring()’
              Expands to the string that defines a `chapter’ entry, by default Chapter.   Can  be
              redefined for national language support by `setchapterstring()’.

       `getdatestring()’
              Expands  to  the  string that defines the name of Date Information, by default DATE
              INFORMATION. Can be redefined for national language support  by  `setdatestring()’.
              Currently, it is relevant only for txt.

       `getfigurestring()’
              Returns  the  string  that  defines  a `figure’ text, in captions or in the `fig()’
              macro. The string can be redefined using the `setfiguretext()’ macro.

       `getpartstring()’
              Expands to the string that  defines  a  `part’  entry,  by  default  Part.  Can  be
              redefined for national language support by `setpartstring()’.

       `gettitlestring()’
              Expands  to the string that defines the name of Title Information, by default TITLE
              INFORMATION. Can be redefined for national language support by  `settitlestring()’.
              Currently, it is relevant only for txt.

       `gettocstring()’
              Expands  to  the  string that defines the name of the table of contents, by default
              Table  of  Contents.  Can  be  redefined   for   national   language   support   by
              `settocstring()’.

       `htmlcommand(cmd)’
              Writes  `cmd’  to  the  output  when  converting  to html. The `cmd’ is not further
              expanded by Yodl.

       `htmlheadfile(file)’
              Adds the contents of `file’ to the `head’ section of an HTML document. The contents
              of  file are not interpreted and should contain plain html text. This option can be
              useful when large bodies of text, like the contents of `<script>’ sections, must be
              included  into the head section of html documents. This macro is only active in the
              preamble, should only specified once, and is only interpreted for html conversions.

       `htmlheadopt(option)’
              Adds the literal text `option’ to the current information in the `head’ section  of
              an  HTML  document.  `Option’  may (or: should) contain plain html text. A commonly
              occurring head option is `link’, defining, e.g., a style sheet. Since  that  option
              is frequently used, it has received a dedicated macro: `htmlstylesheet’. When large
              bodies of html-text must be added to html documents the macro `htmlheadfile’ should
              be used. This macro is only active in the preamble and is only interpreted for html
              conversions.

       `htmlnewfile()’
              In HTML output, starts a new file. All other formats are not  affected.  Note  that
              you  must  take  your  own provisions to access the new file; say via links.  Also,
              it’s safe to start a new file just befoore opening a new  section,  since  sections
              are  accessible  from  the clickable table of contents. The HTML converter normally
              only starts new files prior to a `chapter’ definition.

       `htmlstyle(tag)(definition)’
              Adds a `<style type="text/css"> ... </style>’ element to the  head  section  of  an
              HTML document.
              Use  `htmlstyle’  to  specify  one  or  more  CSS  definitions which are eventually
              inserted at the ellipsis (`...’) in the generic  `style’  definition  shown  above.
              E.g.,  (using  `#rrggbb’  to specify a color, where `rr’ are two hexadecimal digits
              specifying the color’s red component, `gg’ two hexadecimal  digits  specifying  the
              color’s  green  component,  and  `bb’ two hexadecimal digits specifying the color’s
              blue component)  specifying

                  htmlstyle(body)(color: #rrggbb; background-color: #rrggbb)
                  htmlstyle(h1)(color: blue; text-align: center)
                  htmlstyle(h2)(color: green)

              results in the element

                  <style type="text/css">
                      body {color: #rrggbb; background-color: #rrggbb;}
                      h1 {color: blue; text-align: center;}
                      h2 {color: green;}
                  </style>

              The macros `htmlheadopt’ and `htmlstylesheet’ could also be used to put information
              into  the  head-section  of  an  HTML document, but `htmlheadopt’ is of a much more
              general nature, while `htmlstylesheet’ refers to CSS elements stored in an external
              file. The macro `attrib’ can be used to define inline styles.

              The  `htmlstyle’  macro  is only active in the preamble and is only interpreted for
              html conversions.
              Refer to available CSS specifications (cf., http://www.w3schools.com/cssref/ for an
              overview  of  how  CSS  specifications  are  used, and which CSS specifications are
              available).

              By default the internal style specification
              `figure {text-align: center;} img {vertical-align: center;}’
              is used. If this is not appropriate, specify `nohtmlimgstyle()’ in the preamble.

       `htmlstylesheet(url)’
              Adds a `<link rel="stylesheet" type="text/css" ...>’ element to the head section of
              an  HTML  document,  using  `url’  in  its  `href’ field. The argument `url’ is not
              expanded, and should be plain HTML text,  without  surrounding  quotes.  The  macro
              `htmlheadopt’  can  also  be used to put information in the head-section of an HTML
              document, but `htmlheadopt’ is of a much more general nature.  This macro  is  only
              active in the preamble and is only interpreted for html conversions.

       `htmltag(tagname)(start)’
              Sets  `tagname’  as  a HTML tag, enclosed by `<’ and `>’. When `start’ is zero, the
              `tagname’ is prefixed with  `/’.  As  not  all  html  tags  are  available  through
              predefined   Yodl-macros   (there  are  too  many  of  them,  some  are  used  very
              infrequently, and you can easily define macros for the tags for which Yodl  doesn’t
              offer  predefined  ones), the `htmltag’ macro can be used to handle your own set of
              macros. In html the `attrib’ macro is supported. E.g.,

              attrib(title="World Health Organization")    htmltag(abbr)()WHO+htmltag(abbr)(0)

       `ifnewparagraph(truelist)(falselist)’
              The macro `ifnewparagraph’ should be called from the `PARAGRAPH’ macro, if defined.
              It  will insert `truelist’ if a new paragraph is inserted, otherwise `falselist’ is
              inserted (e.g., following two consecutive calls of PARAGRAPH). This  macro  can  be
              used to prevent outputting multiple blank lines.

       `includefile(file)’
              Includes `file’. The default extension `.yo’ is supplied if necessary.

              Since  Yodl  version 3.00.0 Yodl’s default file inclusion behavior has changed. The
              current working directory no longer remains fixed at the directory in which Yodl is
              called, but is volatile, changing to the directory in which a yodl-file is located.
              This has the advantage that Yodl’s file inclusion behavior now matches the way  C’s
              `#include’  directive  operates. The originally implemented file inclusion behavior
              is used when Yodl’s `-L’ (`--legacy-include’) option is used.

       `includeverbatim(file)’
              Include `file’ into the output.   No  processing  is  done,  `file’  should  be  in
              preformatted form, e.g.:
              whenhtml(includeverbatim(foo.html))

       `it()’ Indicates  an  item  in  an  itemized  list.  Items in `it’ macros are arguments of
              `itemization’ macros.

       `itdesc(itemname)(contents)’
              Starts an item and its description in a description list. Its name  is  `itemname’,
              the  contents  of  the  item is defined by `contents’. The `itemname’ is defined by
              using the `dit’ macro.

              With `html’ conversions the contents are surrounded by  `<dd>’  and  `</dd>’  tags,
              resulting  in  contents  which  are  indented  relative  to  the itemname. When the
              `attrib’ macro is used it is applied to the itemname (`dt’-tags).

              With other conversions the `contents’ are quoted (as if using `quote(contents)’).

       `itemization(list)’
              Sets `list’ as an itemizationd list. Use `it()’ to indicate items in the list.

       `kindex()’
              Generate an index entry for LaTex() or texinfo k-indices. Its argument is the index
              entry.  See also the `[cfptv]vindex’ macro.

       `label(labelname)’
              Defines  `labelname’  as  an  anchor for a `link’ command, or to stand for the last
              numbering of a section or figure in a `ref’ command.

       `langle()’
              Character <

       `languagedutch()’
              Defines   the   Dutch-language   specific   headers.   Active   this   macro    via
              setlanguage(dutch).

       `languageenglish()’
              Defines   the   English-language   specific   headers.   Active   this   macro  via
              setlanguage(english).

       `languageportugese()’
              Defines  the  Portugese-language  specific   headers.   Active   this   macro   via
              setlanguage(portugese).

       `LaTeX()’
              The LaTeX symbol.

       `latexaddlayout(arg)’
              This  macro  is  provided  to  add  Yodl-interpreted text to  your own LaTeX layout
              commands. The command is terminated  with  an  end-of-line.   See  also  the  macro
              `latexlayoutcmds()’

       `latexcommand(cmd)’
              Writes  `cmd’  plus a white space to the output when converting to LaTeX. The `cmd’
              is not further expanded by Yodl.

       `latexdocumentclass(class)’
              Forces the LaTeX `\documentclass{...}’ setting to `class’. Normally  the  class  is
              defined by the macros `article’, `report’ or `book’.  This macro is an escape route
              in case you need to specify your own document class for LaTeX.  This  option  is  a
              modifier and must appear before the `article’, `report’ or `book’ macros.

       `latexlayoutcmds(NOTRANSs)’
              This  macro is provided in case you want to put your own LaTeX layout commands into
              LaTeX output. The `NOTRANSs’ are pasted right after  the  `\documentclass’  stanza.
              The  default  is, of course, no local LaTeX commands. Note that this macro does not
              overrule my favorite LaTeX layout. Use `nosloppyhfuzz()’ and `standardlayout()’  to
              disable my favorite LaTeX layout.

       `latexoptions(options)’
              Set  latex  options: `documentclass[options]’.  This command must appear before the
              document type is stated by `article’, `report’, etc..

       `latexpackage(options)(name)’
              Include latex package(s), a useful package is,  e.g.,  `epsf’.  This  command  must
              appear before the document type is stated by `article’, `report’, etc..

       `lchapter(label)(title)’
              Starts  a  new chapter in books or reports, setting a label at the beginning of the
              chapter.

       `letter(language)(date)(subject)(opening)(salutation)(author)’
              Starts a letter written in the indicated language. The date of the letter is set to
              `date’,  the  subject  of  the  letter  will  be  `subject’. The letter starts with
              `opening’. It is based on the `letter.cls’ document class definition.  The macro is
              available for LaTeX only. Preamble command suggestions:

       o      `latexoptions(11pt)’

       o      `a4enlarged()’

       o      `letterreplyto(name)(address)(postalcode/city)’

       o      `letterfootitem(phone)(number)’, maybe e-mail too.

       o      `letteradmin(yourdate)(yourref)’

       o      `letterto(addressitem)’.  Use  a separate `letterto()’ macro call for each new line
              of the address.

       `letteraddenda(type)(value)’
              Adds an addendum at the end of a letter. `type’ should be `bijlagen’, `cc’ or `ps’.

       `letteradmin(yourdate)(yourref)’
              Puts `yourletterfrom’ and `yourreference’ elements in the letter.  If  left  empty,
              two dashes are inserted.

       `letterfootitem(name)(value)’
              Puts  a  footer at the bottom of letter-pages. Up to three will usually fit.  LaTeX
              only.

       `letterreplyto(name)(address)(zip city)’
              Defines the `reply to’ address in LaTeX or txt-letters.

       `letterto(element)’
              Adds `element’ as an additional line to the address in LaTeX letters.

       `link(description)(labelname)’
              In HTML output a clickable link with the text `description’ is created that  points
              to  the  place  where  `labelname’ is defined using the `label’ macro, and `attrib’
              macro applies to the `<a>’ tag.  Using `link’ is similar to `url’,  except  that  a
              hyperlink  is  set  pointing to a location in the same document. For output formats
              other than HTML, only the `description’ appears.

       `lref(description)(labelname)’
              This macro is a combination of the `ref’  and  `link’  macros.  In  HTML  output  a
              clickable  link  with  the  text  `description’ and the label value is created that
              points to the place where `labelname’ is  defined  using  the  `label’  macro,  and
              `attrib’  macro  applies to the `<a>’ tag. For output formats other than HTML, only
              the `description’ and the label value appears.

       `lsect(label)(title)’
              Starts a new section, setting a label at the beginning of  the  section.   In  html
              `attrib’ macro applies to the `<h2>’ tag.

       `lsubsect(label)(title)’
              Starts   a   new   subsection.  Other  sectioning  commands  are  `subsubsect’  and
              `subsubsubsect’. A label is added just before the  subsection.   In  html  `attrib’
              macro applies to the `<h3>’ tag.

       `lsubsubsect(label)(title)’
              Starts  a sub-subsection, a label is added just before the section In html `attrib’
              macro applies to the `<h4>’ tag.

       `lsubsubsubsect(label)(title)’
              Starts a sub-sub-sub section. This level of sectioning is not numbered, in contrast
              to `higher’ sectionings. A label is added just before the subsubsubection.

       `lurl(locator)’
              An url described by its Locator.  For small urls with readable addresses.

       `mailto(address)’
              Defines  the  default  `mailto’  address  for  HTML  output. Must appear before the
              document type is stated by `article’, `report’, etc..

       `makeindex()’
              Make index for latex.

       `mancommand(cmd)’
              Writes `cmd’ to the output when  converting  to  man.  The  `cmd’  is  not  further
              expanded by Yodl.

       `manpage(title)(section)(date)(source)(manual)’
              Starts  a manual page document. The `section’ argument must be a number, stating to
              which section the manpage belongs to.  Most  often  used  are  commands  (1),  file
              formats  (5)  and  macro packages (7). The sectioning commands in a manpage are not
              `(n)sect’ etc., but `manpage...()’. The first section must  be  the  `manpagename’,
              the  last  section  must be the `manpageauthor’. The standard manpage for section 1
              contains  the   following   sections   (in   the   given   order):   `manpagename’,
              `manpagesynopsis’,    `manpagedescription’,    `manpageoptions’,    `manpagefiles’,
              `manpageseealso’, `manpagediagnostics’,  `manpagebugs’,  `manpageauthor’.  Optional
              extra  sections  can  be  added  with  `manpagesection’. Standard manpageframes for
              several manpagesections are  provided  in  `/usr/local/share/yodl/manframes’.  YODL
              manual pages can be converted to `groff, html’, or plain ascii text formats.

       `manpageauthor()’
              Starts  the  AUTHOR  entry  in  a `manpage’ document. Must be the last section of a
              `manpage’.

       `manpagebugs()’
              Starts the BUGS entry in a `manpage’ document.

       `manpagedescription()’
              Starts the DESCRIPTION entry in a `manpage’ document.

       `manpagediagnostics()’
              Starts the DIAGNOSTICS entry in a `manpage’ document.

       `manpagefiles()’
              Starts the FILES entry in a `manpage’ document.

       `manpagename(name)(short description)’
              Starts the NAME entry in a `manpage’ document. The short description  is  used  by,
              e.g., the `whatis’ database.

       `manpageoptions()’
              Starts the OPTIONS entry in a `manpage’ document.

       `manpagesection(SECTIONNAME)’
              Inserts  a  non-required  section named `SECTIONNAME’ in a `manpage’ document. This
              macro can be used to augment `standard’ manual pages  with  extra  sections,  e.g.,
              EXAMPLES.  Note  that  the  name  of the extra section should appear in upper case,
              which is consistent with the normal typesetting of manual pages.

       `manpageseealso()’
              Starts the SEE ALSO entry in a `manpage’ document.

       `manpagesynopsis()’
              Starts the SYNOPSIS entry in a `manpage’ document.

       `manttquoted(onOff)’
              With man-conversions arguments of tt  macros  are  displayed  as  normal  text.  To
              enhance  their  visibility arguments of tt macros may be quoted, in which case they
              are surrounded by backtics and normal quotes. By default arguments of tt macros are
              not  quoted.  Quotation  is  used after calling `manttquoted(1)’, and is suppressed
              after calling `manttquoted(0)’. The macro is only active when converting to man.

       `mbox()’
              Unbreakable box in  LaTeX.  Other  formats  may  have  different  opitions  on  our
              unbreakable boxex.

       `metaC(text)’
              Put a line comment in the output.

       `metaCOMMENT(text)’
              Write format-specific comment to the output.

       `mscommand(cmd)’
              Writes `cmd’ to the output when converting to ms. The `cmd’ is not further expanded
              by Yodl.

       `nbsp(count)’
              Inserts `count’ `non-breaking space’ characters into the  generated  output;  i.e.,
              the  space  character  is  not  optimized  away.  If the argument list is empty one
              non-breaking space is inserted.

       `nchapter(title)’
              Starts a chapter (in a `book’ or `report’) without generating a number  before  the
              title  and  without  placing an entry for the chapter in the table of contents.  In
              html `attrib’ macro applies to the `<h1>’ tag.

       `nemail(name)(address)’
              Named email.  A more consistent naming for url, lurl, email  and  nemail  would  be
              nice.

       `nl()’ Forces a newline; i.e., breaks the current line in two.

       `nodeprefix(text)’
              Prepend text to node names, e.g.
              nodeprefix(LilyPond) sect(Overview)
              Currently used in texinfo descriptions only.

       `nodeprefix(text)’
              Prepend text to node names, e.g.
              nodeprefix(LilyPond) sect(Overview)
              Currently used in texinfo descriptions only.

       `nodetext(text)’
              Use text as description for the next node, e.g.
              nodetext(The GNU Music Typesetter)chapter(LilyPond)
              Currently used in texinfo descriptions only.

       `nohtmlfive()’
              Starting  yodl  3.05  html-conversions by default use html5. This can be suppressed
              (in favor of using html4) by calling  this  macro.  This  macro  merely  suppresses
              writing the initial `<!DOCTYPE html>’ to generated html files; it is only active in
              the preamble and is only interpreted for html conversions.

       `nohtmlimgstyle()’
              By default html-pages specify
              `(<style type="text/css" img {vertical-align: bottom;}></style>)’
              This macro suppresses this `img’ CSS style specification. This macro is only active
              in the preamble and is only interpreted for html conversions.

       `nop(text)’
              Expand  to  text,  to avoid spaces before macros e.g.: a. Although a+sups(2) should
              have the same effect.

       `nosloppyhfuzz()’
              By default, LaTeX output contains commands that cause it to shut  up  about  hboxes
              that  are less than 4pt overfull. When `nosloppyhfuzz()’ appears before stating the
              document type, LaTeX complaints are `vanilla’.

       `notableofcontents()’
              Prevents the generation of a table of contents. This is default in, e.g., `manpage’
              and `plainhtml’ documents. When present, this option must appear before stating the
              document type with `article’, `report’ etc..

       `notitleclearpage()’
              Prevents the generation of a `clearpage()’ instruction  after  the  typesetting  of
              title information. This instruction is default in all non `article’ documents. When
              present, must appear before stating the document type  with  `article’,  `book’  or
              `report’.

       `notocclearpage()’
              With  the  LaTeX  converter,  no  `clearpage()’ instruction is inserted immediately
              beyond the document’s table of contents. The `clearpage()’ instruction  is  default
              in  all  but  the `article’ document type. When present, must appear before stating
              the document type with `article’, `book’ or `report’. With  other  converters  than
              the LaTeX converter, it is ignored.

       `notransinclude(filename)’
              Reads  filename and inserts it literally in the text not subject to macro expansion
              or character translation.  No information is written either  before  or  after  the
              file’s contents, not even a newline.

       `noxlatin()’
              When  used  in the preamble, the LaTeX converter disables the inclusion of the file
              `xlatin1.tex’. Normally this file gets included in the LateX output files to ensure
              the  conversion  of  high  ASCII characters (like e) to LaTeX-understandable codes.
              (The file `xlatin1.tex’ comes with the YODL distribution.)

       `nparagraph(title)’
              Starts a non-numbered paragraph (duh, corresponds to subparagraph in latex).

       `npart(title)’
              Starts a part in a `book’ document, but without numbering it and  without  entering
              the  title of the part in the table of contents.  In html `attrib’ macro applies to
              the `<h1>’ tag.

       `nsect(title)’
              Starts a section, but does not generate a number before the `title’ nor an entry in
              the  table  of  contents. Further sectioning commands are `nsubsect’, `nsubsubsect’
              and `nsubsubsubsect’.  In html `attrib’ macro applies to the `<h2>’ tag.

       `nsubsect(title)’
              Starts a non-numbered subsection.  In html the `attrib’ macro applies to the `<h3>’
              tag.

       `nsubsubsect(title)’
              Starts a non-numbered sub-sub section.  In html `attrib’ macro applies to the `<p>’
              tag.

       `nsubsubsect(title)’
              Starts a non-numbered sub-subsection.

       `paragraph(title)’
              Starts a paragraph. This level of  sectioning  is  not  numbered,  in  contrast  to
              `higher’ sectionings (duh, corresponds to subparagraph in latex).  In html `attrib’
              macro applies to the `<p>’ tag.

       `part(title)’
              Starts a new part in a `book’ document.  In html  `attrib’  macro  applies  to  the
              `<h1>’ tag.

       `pindex()’
              Generate an index entry for LaTex() or texinfo p-indices. Its argument is the index
              entry.  See also the `[cftv]index’ macro.

       `plainhtml(title)’
              Starts a document for only a plain HTML conversion. Not available in  other  output
              formats.  Similar  to  `article’,  except  that  an  author- and date field are not
              needed.

       `printindex()’
              Make index for texinfo (?).

       `quote(text)’
              Sets the text as a quotation. Usually, the  text  is  indented,  depending  on  the
              output format. In html the `attrib’ macro is recognized by the `<blockquote>’ tag.

       `rangle()’
              Inserts the right angle character (>).

       `redef(macro)(nrofargs)(redefinition)’
              Defines  macro  `macro’  to  expand  to  `redefinition’.  Similar to `def’, but any
              pre-existing definition is overruled.  Use  `ARG’x  in  the  redefinition  part  to
              indicate  where  the  arguments  should  be  pasted.  E.g., `ARG1’ places the first
              argument, `ARG2’ the second argument, etc...

       `redefinemacro(macro)(nrofargs)(redefinition)’
              Defines macro `macro’ to expand to  `redefinition’.   Similar  to  `def’,  but  any
              pre-existing  definition  is  overruled.  Use  `ARG’x  in  the redefinition part to
              indicate where the arguments should  be  pasted.  E.g.,  `ARG1’  places  the  first
              argument,  `ARG2’  the  second  argument,  etc... This commands is actually calling
              redef().

       `ref(labelname)’
              Sets the reference for `labelname’. Use `label’ to define a label.

       `report(title)(author)(date)’
              Starts a report type document. The top-level sectioning  command  in  a  report  is
              `chapter’.  In  html  the  way the headings are displayed can be tuned using CSS id
              selector specifications: the title has `id="title"’, the author `id="author"’,  and
              the date `id="date"’.

       `roffcmd(dotcmd)(sameline)(secondline)(thirdline)’
              Sets  a t/nroff command that starts with a dot, on its own line. The arguments are:
              `dotcmd’ - the command itself, e.g., `.IP’; `sameline’ - when not empty, `sameline’
              is  set on the same line, following the `dotcmd’; `secondline’ - when not empty, is
              set on the next line; `thirdline’ - when not empty, is set on the third line. Note:
              `dotcmd’ and `thirdline’ are not further expanded by YODL, the other arguments are.

       `row(contents)’
              The  argument  `contents’  may contain a man-page alignment specification (only one
              specification can be entered per  row),  using  `setmanalign()’.  If  omitted,  the
              standard alignment is used. Furthermore it contains the contents of the elements of
              the row, using `cell()’ or `cells()’ macros. If `cells()’ is used,  `setmanalign()’
              should  have  been  used  too.  In this macro call only the `cell()’, `cells()’ and
              `setmanalign()’  macros  should  be  called.  Any  other  macro  call  may  produce
              unexpected results.

              The  `row’ macro defines a counter `XXcol’ that can be inspected and is incremented
              by predefined macros  adding  columns  to  a  row.  The  counter  is  initially  0.
              Predefined macros adding columns to a row add the number of columns they add to the
              row inserting the contents of those columns.  These  macros  rely  on  the  correct
              value  of  this  counter  and  any user-defined macros adding columns to table rows
              should correctly update `XXcol’.  In html `attrib’ macro applies to the `<tr>’ tag.

              Instead of using `row’ in `table’, consider using `tr’ in `tbl’.

       `rowline()’
              Sets a horizontal line over the full width of the table. See also the  `columnline’
              macro.  Use  `rowline’  instead  of  a  `row’  macro call to provide a table with a
              horizontal line-separator.

              Instead of using `rowline’ consider using `tline’ in a `tbl’ argument.

       `sc(text)’
              Set `text’ in the tt (code) font, using small caps.  In html the `attrib’ macro  is
              not  supported,  while  the  code  section is embedded in a `<div style="font-size:
              90%">’ section.

       `sect(title)’
              Starts a new section. In html the `attrib’ macro is recognized by the `<h2>’ tag.

       `setaffilstring(name)’
              Defines `name’ as the `affiliation  information’  string,  by  default  AFFILIATION
              INFORMATION.  E.g.,  after  `setaffilstring(AFILIACION)’, YODL outputs this Spanish
              string to describe the affiliation information.  Currently, it is relevant only for
              txt.

       `setauthorstring(name)’
              Defines  `name’  as the `Author information’ string, by default AUTHOR INFORMATION.
              E.g., after  `setauthorstring(AUTOR)’,  YODL  outputs  this  portuguese  string  to
              describe the author information.  Currently, it is relevant only for txt.

       `setchapterstring(name)’
              Defines   `name’   as  the  `chapter’  string,  by  default  Chapter.  E.g.,  after
              `setchapterstring(Hoofdstuk)’, YODL gains some measure of national language support
              for  Dutch.  Note that LaTeX support has its own NLS, this macro doesn’t affect the
              way LaTeX output looks.

       `setdatestring(name)’
              Defines `name’ as the `date information’ string, by default DATE INFORMATION. E.g.,
              after  `setdatestring(DATA)’,  YODL  outputs this portuguese string to describe the
              date information.  Currently, it is relevant only for txt.

       `setfigureext(name)’
              Defines the `name’ as the `figure’ extension.  The  extension  should  include  the
              period, if used. E.g., use setfigureext(.ps) if the extensions of the figure-images
              should end in `.ps’

       `setfigurestring(name)’
              Defines the `name’ as the `figure’ text, used e.g. in figure captions. E.g.,  after
              `setfigurestring(Figuur)’, Yodl uses Dutch names for figures.

       `sethtmlfigureext(ext)’
              Defines  the  filename  extension for HTML figures, defaults to `.jpg’. Note that a
              leading dot must be included in `ext’. The new extension takes effect starting with
              the  following  usage  of  the  `figure’  macro.   It  is  only active in html, but
              otherwise acts identically as setfigureext().

              See also the `setlatexfigureext’ macro.

       `htmlmetacharset(meta-charset)’
              Adds `<meta charset="meta-charset">’ to the head  of  html  documents.  By  default
              `<meta  charset="UTF-8">’ is used. This macro is only active in the preamble and is
              only interpreted for html conversions.

       `setincludepath(name)’
              Sets a new value of the include-path specification used when opening .yo  files.  A
              warning  is  issued when the path specification does not include a .: element. Note
              that the local directory may still be an element of the new include  path,  as  the
              local directory may be the only or the last element of the specification. For these
              eventualities the new path specification is not checked.

       `setlanguage(name)’
              Installs the headers specific to a language. The argument must be  the  name  of  a
              language,  whose  headers  have been set by a corresponding languageXXX() call. For
              example: languagedutch(). The language macros should set the names of  the  headers
              of  the  following elements: table of contents, affiliation, author, chapter, date,
              figure, part and title

       `setlatexalign(alignment)’
              This macro defines the table alignment used when setting tables in LaTeX.   Use  as
              many   `l’   (for   left-alignment),  `r’  (for  right  alignment),  and  `c’  (for
              centered-alignment) characters  as  there  are  columns  in  the  table.  See  also
              `table()’.

              Instead of using the `table’ macro consider using the `tbl’ macro.

       `setlatexfigureext(ext)’
              Defines  the  filename  extension  for  encapsulated  PostScript  figures in LaTeX,
              defaults to `.ps’. The dot must be included in  t  new  extension  `ext’.  The  new
              extension takes effect starting with a following usage of the `figure’ macro. It is
              only active in LaTeX, but otherwise acts identically as setfigureext().

              See also the `sethtmlfigureext’ macro.

       `setlatexverbchar(char)’
              Set the char used to quote LaTeX \verb sequences

       `setmanalign(alignment)’
              This macro defines the table alignment in the context of the `table’ macro, and  is
              used when setting tables in man-pages (see tbl(1)).

              Use  as  many  `l’  (for  left-alignment),  `r’ (for right alignment), and `c’ (for
              centered-alignment) characters as there are columns in the table.

              Use `s’ to indicate that the column to  its  left  is  combined  (spans  into)  the
              current column. Use this specification when cells spanning multiple columns must be
              defined.

              Each row in a table which must be convertible to a manpage may be preceded  by  its
              own `setmanalign’ call.

              Note that neither `rowline’ nor `columnline’ requires `setmanalign’ specifications,
              as these macros define rows by themselves. It is the responsibility of  the  author
              to ensure that the number of alignment characters is equal to the number of columns
              of the table.

              Instead of using the `table’ macro consider using the `tbl’ macro.

       `setpartstring(name)’
              Defines  `name’  as   the   `part’   string,   by   default   Part.   E.g.,   after
              `setpartstring(Teil)’,  Yodl  identifies  parts  in the German way. Note that LaTeX
              output does its own national language support; this macro doesn’t  affect  the  way
              LaTeX output looks.

       `setrofftab(x)’
              Sets  the  character separating items in a line of input data of a `roff’ (manpage)
              table. By default it is set to `~’. This separator is used  internally,  and  needs
              only  be  changed  (into  some  unique  character) if the table elements themselves
              contain `~’ characters.

              This macro can be used in the context of the `table’ and `tbl’ macros.

       `setrofftableoptions(optionlist)’
              Set options used for man-conversion, as used by the `tbl’ and  `table’  macros.  By
              default  no  options are used. Multiple options should be separated by blanks. From
              the tbl(1) manpage, the following options are available:

       o      `center’ Centers the table; default is left-justified. In the context of the  `tbl’
              macro this is implied when the `tbl’ macro is specified as argument of the `center’
              macro.

       o      `expand’ Makes the table as wide as the current line length

       o      `box’ Encloses the table in a box

       o      `allbox’ Encloses each item of the table in a box

              See also `setrofftab’ which is used to set the character separating items in a line
              of input data.

       `settitlestring(name)’
              Defines  `name’  as  the  `title information’ string, by default TITLE INFORMATION.
              E.g., after `settitlestring(TITEL)’, YODL outputs this Dutch string to describe the
              title information.  Currently, it is relevant only for txt.

       `settocstring(name)’
              Defines  `name’  as  the  `table of contents’ string, by default Table of Contents.
              E.g., after `settocstring(Inhalt)’, YODL identifies the table of  contents  in  the
              German  way.  Note  that  LaTeX output does its own national language support; this
              macro doesn’t affect the way LaTeX output looks.

       `sgmlcommand(cmd)’
              Writes `cmd’ to the output when converting  to  sgml.  The  `cmd’  is  not  further
              expanded by Yodl.

       `sgmltag(tag)(onoff)’
              Similar to `htmltag’, but used in the SGML converter.

       `sloppyhfuzz(points)’
              By  default,  LaTeX  output contains commands that cause it to shut up about hboxes
              that are less than 4pt overfull. When `sloppyhfuzz()’ appears  before  stating  the
              document  type,  LaTeX  complaints  occur  only if hboxes are overfull by more than
              `points’.

       `standardlayout()’
              Enables the default LaTeX layout. When this macro is absent, then the  first  lines
              of paragraphs are not indented and the space between paragraphs is somewhat larger.
              The `standardlayout()’ directive must appear before stating the  document  type  as
              `article’, `report’, etc..

       `strong(contents)’
              In html and xml the `contents’ are set between `<strong>’ and `</strong>’ tags.  In
              html `attrib’ macro applies to the `<strong>’ tag.

       `subs(text)’
              Sets text in subscript in supporting  formats.   In  html  the  `attrib’  macro  is
              recognized by the `<sub>’ tag.

              For superscripting, the `sups’ macro can be used.

       `subsect(title)’
              Starts   a   new   subsection.  Other  sectioning  commands  are  `subsubsect’  and
              `subsubsubsect’.  In html `attrib’ macro applies to the `<h3>’ tag.

       `subsubsect(title)’
              Starts a sub-subsection.  In html `attrib’ macro applies to the `<h4>’ tag.

       `subsubsubsect(title)’
              Starts a sub-sub-sub-subsection. This level  of  sectioning  is  not  numbered,  in
              contrast to `higher’ sectionings.

       `sups(text)’
              Sets  text  in  superscript  in  supporting  formats  In html the `attrib’ macro is
              recognized by the `<sup>’ tag.

              For subscripting, the `subs’ macro can be used.

       `table(nColumns)(alignment)(Contents)’
              Instead of using the `table’ macro, consider using the `tbl’ macro.

              The `table()’-macro defines a table. Its first argument  specifies  the  number  of
              columns in the table.

              Its  second  argument  specifies the (standard) alignment of the information within
              the cells as used  by  LaTeX  or  man/ms.  Use  `l’  for  left-alignment,  `c’  for
              centered-alignment and `r’ for right alignment.

              Its  third  argument  defines  the  contents  of the table which are the rows, each
              containing column-specifications and optionally man/ms  alignment  definitions  for
              this row.

              See also the `tableatt’ macro and the specialized `setmanalign()’ macro.

       `tableatt(nColumns)(alignment)(Contents)’
              Instead of using the `tableatt’ macro, consider using the `tbl’ macro.

              The  `tableatt()’-macro  defines a table. The last `attrib’ call that was specified
              before using the `tableatt()’-macro is used to  specify  html  attributes  for  the
              table. E.g., to center a table in html use

                  attrib(style="margin-left:auto;margin-right:auto;")
                  tableatt(...)

              The  macro’s  first  argument  specifies  the  number of columns in the table.  Its
              second argument specifies the (standard) alignment of the  information  within  the
              cells   as   used  by  LaTeX  or  man/ms.  Use  `l’  for  left-alignment,  `c’  for
              centered-alignment and `r’ for right alignment.  Its  third  argument  defines  the
              contents of the table which are the rows, each containing column-specifications and
              optionally man/ms alignment definitions for this row.

              See also the `table’ macro and the specialized `setmanalign()’ macro.

       `tac(alignment)(contents)’
              This macro is one of the four macros that can be used to define column contents  of
              rows of tables defined by the `tbl’ macro. Alternatively, `tc, tnc’, and `tnac’ can
              be used.

              The `tac’ macro is used as argument of the `tr’  macro.  The  cell’s  alignment  is
              defined  by  the  `alignment’  specification,  containing  at  most  two  alignment
              specifications: a horizontal alignment (one of c,  l,  r  (centered,  left-aligned,
              right-aligned))  and  a  vertical  alignment  (one  of  t,  b  (vertical  top-  and
              bottom-alignment)) (not all conversion types may support all alignment types, e.g.,
              man-conversion  does  not  support vertical bottom alignment). Specifications other
              than c, l, r, b, and t and specifications beyond the second one  are  ignored.  The
              result  of  specifying  conflicting  alignment  types  (e.g.,  `lr’ or `tb’) is not
              defined.

              When converting to `man’, if the table’s contents should span multiple rows, then a
              groff/troff(1)  text  block must be used. Since most tables do not use this, a text
              block is not generated by default. To actually wrap the contents of column elements
              in  a  text block while converting to `man’ prefix the first text block requiring a
              text-block wrapping by  `twrap(1)’,  and  end  the  last  text  block  requiring  a
              text-block wrapping by `wrap(0)’.

              The  `tao’  macro  can  be  used to overrule the specified alignment for a specific
              conversion type.

              The macro `tac’ recognizes `attrib’.

       `tao(type)(specification)’
              This macro is used inside the `tbl’ macro to override the  alignment  specification
              that  would otherwise be used for the next table element. It is only active for the
              next `tc, tnc, tac,’ or `tnac’ call. Its first argument defines the conversion type
              for  which  the  override should be used, its second argument defines the alignment
              specification to use.

              Here are some examples:

              tbl(lr)(
                  tr(
                      tc(left aligned)
                      tc(right aligned)
                  )
                  tr(
                      tao(html)(c)
                        tc(left aligned, centered with html)
                      tao(latex)(l)
                      tao(man)(l)
                        tac(c)(centered, latex and man: left aligned)
                  )
              )

              Further details about the `tao’ macro are provided in the yodltables(7) man-page.

       `tbl(align)(contents)’
              The `tbl’ macro refines the more basic `table’ macro. It was named after the tbl(1)
              table formatting program used with troff(1) documents.

              The  `tbl’  macro  currently  is  available  for  `html,  man/ms,  latex’ and `txt’
              conversions.

              Its first argument defines the alignment of the information in the table’s columns,
              and  is  used  by all conversions except `txt’. Use `l’ for left-alignment, `c’ for
              centered-alignment and `r’ for right-alignment. Individual cells of the  table  may
              override these default settings using the macros `tac’ and `tnac’.

              Its  second  argument  defines  the contents of the table consisting of rows (using
              `tr’), and horizontal lines (using `tline’), which may extend over the  full  table
              width  or  may  cover  one  or more individual columns. With `txt’ conversion rough
              approximations of horizontal lines are used.

              Tables defined  by  the  `tbl’  macro  are  centered  (pseudo  centering  (8  space
              characters)  is  used  for  `txt’ conversion) when used as argument of the `center’
              macro.

              See also the `tao’ macro for information about how to realize  specific  alignments
              for specific conversion types.

              When defining `tbl’ tables it is advised to clearly layout the table specification.
              To avoid inadvertently introducing new lines lines should end in  a  backslash  (or
              The macro `tbl’ recognizes `attrib’.

       `tc(contents)’
              This  macro is one of the four macros that can be used to define column contents of
              rows of tables defined by the `tbl’ macro. Alternatively, `tnc,  tac’,  and  `tnac’
              can be used.

              The  `tc’  macro  is  used  as  argument  of the `tr’ macro. Its order within a row
              defines its type attribute, using the alignment specification defined by the  first
              argument of the `tbl’ call. E.g., if `tbl(clr)(...)’ was used, then the contents of
              the first `tc’ call in a `tr’ is centered in the table’s first column; the contents
              of  the  second  `tc’  call  is  left-aligned in the table’s second column; and the
              contents of the third `tc’ call is right-aligned in the table’s third column.

              When converting to `man’, if the table’s contents should span multiple rows, then a
              groff/troff(1)  text  block must be used. Since most tables do not use this, a text
              block is not generated by default. To actually wrap the contents of column elements
              in  a  text block while converting to `man’ prefix the first text block requiring a
              text-block wrapping by  `twrap(1)’,  and  end  the  last  text  block  requiring  a
              text-block wrapping by `wrap(0)’.

              The  `tao’  macro can be used to overrule the default alignment specification for a
              specific conversion type.

              The macro `tc’ recognizes `attrib’.

       `tcell(text)’
              Roff helper to set a table text-cell, i.e., a paragraph.  For LaTeX  special  table
              formatting p{} should be used.

              When using the `tbl’ macro for defining tables the `twrap’ macro can be used to set
              table elements in text-blocks (i.e., enclosing text, possibly  containing  newlines
              in `T{’ and `T}’ sequences).

       `telycommand(cmd)’
              Writes  `cmd’  to  the  output  when  converting  to tely. The `cmd’ is not further
              expanded by Yodl.

       `TeX()’
              The TeX symbol.

       `texinfocommand(cmd)’
              Writes `cmd’ to the output when converting to texinfo. The  `cmd’  is  not  further
              expanded by Yodl.

       `tindex()’
              Generate an index entry for LaTex() or texinfo t-indices. Its argument is the index
              entry.  See also the `[cfpv]index’ macro.

       `titleclearpage()’
              Forces a new page (using `clearpage’) following the title of a  document.  This  is
              already   the   default   in   books  and  reports,  but  can  be  overruled  using
              `notitleclearpage’. When present, it must appear in the preamble, i.e., before  the
              document type is stated as article, book or report.

       `tline(beginNr)(endNr)’
              This  macro  is  used to insert a horizontal line spanning one or more columns of a
              table defined by the `tbl’ macro.

              If `endNr’ is not specified, and the `tline’ call does not follow a previous `line’
              call in which `endNr’ was specified, then a horizontal line spanning the full width
              of the table is defined (except when converting to plain text in which case a  line
              of  `beginNr’ - (minus) characters is written; if `beginNr’ is not specified then a
              line of 60 - characters is written).

              If `endNr’ is not specified, but the `tline’ call follows  previous  `tline’  calls
              that did specify `endNr’ then the current row is ended.

              If  `endNr’  is specified, then a horizontal line is set, starting at column number
              `beginNr’ continuing through column number `endNr’. Note that  these  are  numbers,
              not  offsets:  `beginNr’  should  be  at least 1, `endNr’ must at least be equal to
              `beginNr’ and should be at most equal to the number of columns in  the  table.  The
              `beginNr’  values  of  subsequent  `tline’ calls refer to the same row as the first
              `tline’ call, and must exceed `endNr’ of the previous `tline’ call.

              Examples:

                  tline()()       sets a line spanning the full table width
                  tline(1)(1)     sets a line in column 1
                  tline(3)(4)     sets another line in column 3 and 4
                  tline()()       ends the previous line
                  tline()()       sets a line spanning the full table width

       `tnac(nCells)(alignment)(contents)’
              This macro is one of the four macros that can be used to define column contents  of
              rows  of tables defined by the `tbl’ macro. Alternatively, `tc, tac’, and `tnc’ can
              be used.

              The `tnac’ macro is used as argument of the `tr’ macro. Its first argument  defines
              the number of columns spanned by the contents (2nd argument) of the `tnc’ macro.

              The  cell’s alignment is defined by the macro’s second (`alignment’) specification,
              containing at most two alignment specifications: a horizontal alignment (one of  c,
              l, r (centered, left-aligned, right-aligned)) and a vertical alignment (one of t, b
              (vertical top- and bottom-alignment)) (not all conversion  types  may  support  all
              alignment  types).  Specifications  other than c, l, r, b, and t and specifications
              beyond the second one are ignored. The result of specifying  conflicting  alignment
              types (e.g., `lr’ or `tb’) is not defined.

              When converting to `man’, if the table’s contents should span multiple rows, then a
              groff/troff(1) text block must be used. Since most tables do not use this,  a  text
              block is not generated by default. To actually wrap the contents of column elements
              in a text block while converting to `man’ prefix the first text block  requiring  a
              text-block  wrapping  by  `twrap(1)’,  and  end  the  last  text  block requiring a
              text-block wrapping by `wrap(0)’.  Multiple rows in a text  block  are  top-aligned
              with left and righ neighboring cells.

              The  `tao’  macro can be used to overrule the default alignment specification for a
              specific conversion type.

              The macro `tnac’ recognizes `attrib’.

       `tnc(nCells)(contents)’
              This macro is one of the four macros that can be used to define the column contents
              of  rows  of  tables that are defined by the `tbl’ macro. Alternatively, `tc, tac’,
              and `tnac’ can be used.

              The `tnc’ macro is used as argument to the `tr’ macro. Its first  argument  defines
              the  number  of  columns spanned by the contents (2nd argument) of the `tnc’ macro.
              The contents are centered in the `nCells’ columns.

              When converting to `man’, if the table’s contents should span multiple rows, then a
              groff/troff(1)  text  block must be used. Since most tables do not use this, a text
              block is not generated by default. To actually wrap the contents of column elements
              in  a  text block while converting to `man’ prefix the first text block requiring a
              text-block wrapping by  `twrap(1)’,  and  end  the  last  text  block  requiring  a
              text-block  wrapping  by  `wrap(0)’.  Multiple rows in a text block are top-aligned
              with left and righ neighboring cells.

              The `tao’ macro can be used to overrule the default alignment specification  for  a
              specific conversion type.

              The macro `tc’ recognizes `attrib’.

       `tocclearpage()’
              With  the  LaTeX  converter,  a  `clearpage()’  directive  if inserted, immediately
              following the document’s table of contents. This is already the default in all  but
              the  `article’  document  type, but it can be overruled by `notocclearpage()’. When
              present, it must appear in the preamble; i.e., before the document type  is  stated
              with `article’, `book’ or `report’. With other converters than the LaTeX converter,
              it is ignored.

       `tr(contents)’
              This macro defines the rows of a table that is defined by the `tbl’ macro.

              The macro `tr’ expects one argument: the contents of the row,  defining  the  row’s
              column  elements.  It  is not used for defining a (partial) horizontal line: to set
              horizontal lines in a table defined by the `tbl’ macro use the macro `tline’.

              Normally the contents of the columns in a (`tr’) row is defined by of one  or  more
              calls to the macros `tc, tac, tnc,’ and/or `tnac’.

              The macro `tr’ recognizes `attrib’.

       `tt(text)’
              Sets `text’ in teletype font, and prevents it from being expanded.  When converting
              to man, `text’ is surrounded by a backtick and a single quote character.

              For unbalanced parameter lists, use `CHAR(40)’ to get `(’  and  `CHAR(41)’  to  get
              `)’.

              The  `tt’ macro does interpret character tables as well as any `SUBST’ definitions.
              This is usually what is  intended.  In  situations  where  this  is  unwelcome  the
              `ttbegin’  and  `ttend’  pair  of  macros  can  be  used, between which the builtin
              commands `PUSHSUBST, POPSUBST, NOEXPAND’ and/or `NOTRANS’ can  be  used.  E.g.,  to
              clearly show two hyphens in LaTeX teletype font use

                  ttbegin()--ttend()

              rather than

                  tt(--)

              Likewise,  use `ttbegin’ and `ttend’ if the teletype text contains accented letters
              like e. To set this in teletype font use `ttbegin()\"’`e+ttend()’.

              With html conversions the `attrib’ macro applies to the `<code>’ tag.

              With  man  conversions  the  arguments  of  tt  macros  can  be  quoted.  See   the
              `manttquoted’ macro for details.

       `ttbegin()’
              Initiates  text  set in teletype font. Following the text to set in teletype font a
              `ttend()’ macro should be called.

              Usually the `tt’ macro can be used instead of the `ttbegin’ -- `ttend’ combination.
              However,  `tt’  interprets  character  tables  as  well  as `SUBST’ definitions. In
              situations where this is unwelcome the `ttbegin’ and `ttend’ pair of macros can  be
              used,  between  which  builtin commands like `PUSHSUBST, POPSUBST, NOEXPAND’ and/or
              `NOTRANS’ can be used.

              In html the `attrib’ macro applies to the `<code>’ tag.

       `ttend()’
              Ends text set in teletype font following `ttbegin’. Refer to the `ttbegin’  macro’s
              description for details.

       `twrap(value)’
              Used for man/ms conversions only: when called with a non-zero argument before using
              the `tc, tnc, tac’, and `tnac’ macros then  their  contents  are  wrapped  in  text
              blocks  (`T{  ... T}’ blocks). To end the wrapping `twrap(0)’ must be called. E.g.,
              in the following row-definition the contents of columns three and four are  set  in
              T-blocks when converting to man/ms:

                  tr(tc(one)tc(two)twrap(1)tc(one)tc(two)twrap(0))

       `txtcommand(cmd)’
              Writes  `cmd’  to  the  output  when  converting  to  txt. The `cmd’ is not further
              expanded by Yodl.

       `url(description)(locator)’
              In LaTeX documents the `description’ is sent to the output. For  HTML,  a  link  is
              created  with  the  descriptive  text  `description’ and pointing to `locator’. The
              `locator’ should be the full URL, including service; e.g, `http://www.icce.rug.nl’,
              but  excluding  the  double  quotes that are necessary in plain HTML. Use the macro
              `link’ to create links within the same document. For other formats, something  like
              description  [locator]  will  appear.   In html `attrib’ macro applies to the `<a>’
              tag.

       `verb(text)’
              Sets `text’ in verbatim mode: not subject to macro  expansion  or  character  table
              expansion,  and  starting with Yodl version 4.00.00: not using `SUBST’ definitions.
              See  also  `verborg’,  which  does  not  provide  the  protection  against  `SUBST’
              definitions.

              While  converting  Yodl-documents to target document types Yodl frequently uses the
              (not further documented) builtin function `XXSUBST’. In the unlikely event that the
              text `XXSUBST(...)’ must be written in a document, the sequence

                  XXSUBST+CHAR(40)...CHAR(41)

              can be used.

              The  text  that  is passed as argument to the `verb’-macro appears literally on the
              output, usually in a teletype font (that depends on the output format). This  macro
              is for larger chunks, e.g., listings.

              When  starting  the  `verb(’  macro  on  a  line  by itself and writing the closing
              parenthesis on a line by itself then those newlines also appear  in  the  resulting
              verbatim  text.  To omit those lines immediately start the first line of text after
              `verb’ and append the closing parenthesis to the last line of verbatim text. E.g.,
              verb(    First line of indented literal text
                  Last line of indented literal text)

              When unbalanced parameter lists  are  required,  use  `CHAR(40)’  to  get  `(’  and
              `CHAR(41)’ to get `)’.

       `verbinclude(filename)’
              Reads  filename  and  inserts  it literally in the text, set in verbatim mode.  not
              subject to macro expansion. The text appears literally on the output, usually in  a
              teletype  font (that depends on the output format). This macro is an alternative to
              `verb(...)’, when the text to set in verbatim mode is better  kept  in  a  separate
              file.

       `verbinsert(args)’
              Passes  `args’  to yodlverbinsert(1), inserting its output into the converted file.
              This macro can be used to insert, e.g., a line-numbered indented file, or a labeled
              subsection of a file, into the file that’s currently being written by `yodl’. E.g,

              verbinsert(-ans4 file)       -- inserts file, showing line
                                              numbers, using a 4 blank-space
                                              character wide indentation.

              verbinsert(-ns4 //SECT file) -- inserts the section of file,
                                              labeled //SECT file, showing
                                              line numbers, using a 4
                                              blank-space character wide
                                              indentation.

       `verborg(text)’
              Sets  `text’  in  verbatim  mode: not subject to macro expansion or character table
              expansion, and  starting  with  Yodl  version  4.00.00:  this  macro  replaces  the
              previously  defined  `verb’ macro. The current `verb’ macro surrounds this macro by
              `PUSHSUBST’ and `POPSUBST’.

              The text that is passed as argument to the `verborg’-macro appears literally on the
              output,  albeit  that `SUBST’ definitions are processed, usually in a teletype font
              (that depends on the output  format).  This  macro  is  for  larger  chunks,  e.g.,
              listings.

              When  unbalanced  parameter  lists  are  required,  use  `CHAR(40)’  to get `(’ and
              `CHAR(41)’ to get `)’.

       `verbpipe(command)(text)’
              Pipe text through command, but don’t expand the output.

       `vindex()’
              Generate an index entry for LaTex() or texinfo  v-indices.   Its  argument  is  the
              index entry.  See also the `[cfkpt]index’ macro.

       `whenhtml(text)’
              Sends  `text’  to  the  output  when  in  HTML conversion mode. The text is further
              expanded if necessary.

       `whenlatex(text)’
              Sends `text’ to the output when in LATEX  conversion  mode.  The  text  is  further
              expanded if necessary.

       `whenman(text)’
              Sends  `text’  to  the  output  when  in  MAN  conversion mode. The text is further
              expanded if necessary.

       `whenms(text)’
              Sends `text’ to the output when in MS conversion mode. The text is further expanded
              if necessary.

       `whensgml(text)’
              Sends  `text’  to  the  output  when  in  SGML conversion mode. The text is further
              expanded if necessary.

       `whentely(text)’
              Sends `text’ to the output when in  TELY  conversion  mode.  The  text  is  further
              expanded if necessary.

       `whentexinfo(text)’
              Sends  `text’  to  the  output when in TEXINFO conversion mode. The text is further
              expanded if necessary.

       `whentxt(text)’
              Sends `text’ to the output when  in  TXT  conversion  mode.  The  text  is  further
              expanded if necessary.

       `whenxml(text)’
              Sends  `text’  to  the  output  when  in  XML  conversion mode. The text is further
              expanded if necessary.

       `xit(itemname)’
              Starts an xml menu item where the file to which the menu refers to is the  argument
              of  the  xit()  macro.  It should be used as argument to xmlmenu(), which has a 3rd
              argument: the default path prefixed to the xit() elements.

              This macro is only available within the xml-conversion mode. The argument must be a
              full filename, including .xml extension, if applicable.

              No .xml extension indicates a subdirectory, containing another sub-menu.

       `xmlcommand(cmd)’
              Writes  `cmd’  to  the  output  when  converting  to  xml. The `cmd’ is not further
              expanded by Yodl.

       `xmlmenu(order)(title)(menulist)’
              Starts an xmlmenu. Use itemization() to define the items.  Only  available  in  xml
              conversion.  The  menutitle  appears  in  the menu as the heading of the menu.  The
              menulist is a series of xit() elements, containing the name of the  file  to  which
              the  menu  refers as their argument (including a final /).  Prefixed to evert every
              xit()-element is the value of XXdocumentbase.

              Order is the the `order’ of the menu. If omitted, no order is defined.

       `xmlnewfile()’
              In XML output, starts a new file. All other formats are not affected. Note that you
              must  take  your  own provisions to access the new file; say via links.  Also, it’s
              safe to start a new file just befoore opening a new  section,  since  sections  are
              accessible  from  the  clickable table of contents. The XML converter normally only
              starts new files prior to a `chapter’ definition.

       `xmlsetdocumentbase(name)’
              Defines `name’ as the XML document base. No default.   Only  interpreted  with  xml
              conversions. It is used with the figure and xmlmenu macros.

       `xmltag(tag)(onoff)’
              Similar to `htmltag’, but used in the XML converter.

OPTIONS

       No options are relevant in respect to the macros.

FILES

       The  files  in tmp/wip/macros define the converter’s macro packages. The scripts yodl2tex,
       yodl2html, yodl2man etc. perform the conversions.

SEE ALSO

       yodl(1), yodlbuiltins(7), yodlconverters(1), yodlletter(7),  yodlmanpage(7),  yodlpost(1),
       yodlstriproff(1), yodltables(7), yodlverbinsert(1).

BUGS

       -

AUTHOR

       Frank B. Brokken (f.b.brokken@rug.nl),