Provided by: btrfs-progs_5.19-1_amd64 
NAME
btrfs-subvolume - manage btrfs subvolumes
SYNOPSIS
btrfs subvolume <subcommand> [<args>]
DESCRIPTION
btrfs subvolume is used to create/delete/list/show btrfs subvolumes and snapshots.
A BTRFS subvolume is a part of filesystem with its own independent file/directory
hierarchy and inode number namespace. Subvolumes can share file extents. A snapshot is
also subvolume, but with a given initial content of the original subvolume. A subvolume
has always inode number 256.
NOTE:
A subvolume in BTRFS is not like an LVM logical volume, which is block-level snapshot
while BTRFS subvolumes are file extent-based.
A subvolume looks like a normal directory, with some additional operations described
below. Subvolumes can be renamed or moved, nesting subvolumes is not restricted but has
some implications regarding snapshotting. The numeric id (called subvolid or rootid) of
the subvolume is persistent and cannot be changed.
A subvolume in BTRFS can be accessed in two ways:
• like any other directory that is accessible to the user
• like a separately mounted filesystem (options subvol or subvolid)
In the latter case the parent directory is not visible and accessible. This is similar to
a bind mount, and in fact the subvolume mount does exactly that.
A freshly created filesystem is also a subvolume, called top-level, internally has an id
5. This subvolume cannot be removed or replaced by another subvolume. This is also the
subvolume that will be mounted by default, unless the default subvolume has been changed
(see btrfs subvolume set-default).
A snapshot is a subvolume like any other, with given initial content. By default,
snapshots are created read-write. File modifications in a snapshot do not affect the files
in the original subvolume.
Subvolumes can be given capacity limits, through the qgroups/quota facility, but otherwise
share the single storage pool of the whole btrfs filesystem. They may even share data
between themselves (through deduplication or snapshotting).
NOTE:
A snapshot is not a backup: snapshots work by use of BTRFS' copy-on-write behaviour. A
snapshot and the original it was taken from initially share all of the same data
blocks. If that data is damaged in some way (cosmic rays, bad disk sector, accident
with dd to the disk), then the snapshot and the original will both be damaged.
Snapshots are useful to have local online "copies" of the filesystem that can be
referred back to, or to implement a form of deduplication, or to fix the state of a
filesystem for making a full backup without anything changing underneath it. They do
not in themselves make your data any safer.
SUBVOLUME FLAGS
The subvolume flag currently implemented is the ro property (read-only status). Read-write
subvolumes have that set to false, snapshots as true. In addition to that, a plain
snapshot will also have last change generation and creation generation equal.
Read-only snapshots are building blocks of incremental send (see btrfs-send(8)) and the
whole use case relies on unmodified snapshots where the relative changes are generated
from. Thus, changing the subvolume flags from read-only to read-write will break the
assumptions and may lead to unexpected changes in the resulting incremental stream.
A snapshot that was created by send/receive will be read-only, with different last change
generation, read-only and with set received_uuid which identifies the subvolume on the
filesystem that produced the stream. The use case relies on matching data on both sides.
Changing the subvolume to read-write after it has been received requires to reset the
received_uuid. As this is a notable change and could potentially break the incremental
send use case, performing it by btrfs property set requires force if that is really
desired by user.
NOTE:
The safety checks have been implemented in 5.14.2, any subvolumes previously received
(with a valid received_uuid) and read-write status may exist and could still lead to
problems with send/receive. You can use btrfs subvolume show to identify them. Flipping
the flags to read-only and back to read-write will reset the received_uuid manually.
There may exist a convenience tool in the future.
NESTED SUBVOLUMES
There are no restrictions for subvolume creation, so it's up to the user how to organize
them, whether to have a flat layout (all subvolumes are direct descendants of the toplevel
one), or nested.
What should be mentioned early is that a snapshotting is not recursive, so a subvolume or
a snapshot is effectively a barrier and no files in the nested appear in the snapshot.
Instead there's a stub subvolume (also sometimes empty subvolume with the same name as
original subvolume, with inode number 2). This can be used intentionally but could be
confusing in case of nested layouts.
Case study: system root layouts
There are two ways how the system root directory and subvolume layout could be organized.
The interesting usecase for root is to allow rollbacks to previous version, as one atomic
step. If the entire filesystem hierarchy starting in "/" is in one subvolume, taking
snapshot will encompass all files. This is easy for the snapshotting part but has
undesirable consequences for rollback. For example, log files would get rolled back too,
or any data that are stored on the root filesystem but are not meant to be rolled back
either (database files, VM images, ...).
Here we could utilize the snapshotting barrier mentioned above, each directory that stores
data to be preserved accross rollbacks is it's own subvolume. This could be eg. /var.
Further more-fine grained partitioning could be done, eg. adding separate subvolumes for
/var/log, /var/cache etc.
That there are separate subvolumes requrires separate actions to take the snapshots (here
it gets disconnected from the system root snapshots). This needs to be taken care of by
system tools, installers together with selection of which directories are highly
recommended to be separate subvolumes.
MOUNT OPTIONS
Mount options are of two kinds, generic (that are handled by VFS layer) and specific,
handled by the filesystem. The following list shows which are applicable to individual
subvolume mounts, while there are more options that always affect the whole filesystem:
• generic: noatime/relatime/..., nodev, nosuid, ro, rw, dirsync
• fs-specific: compress, autodefrag, nodatacow, nodatasum
An example of whole filesystem options is eg. space_cache, rescue, device, skip_balance,
etc. The exceptional options are subvol and subvolid that are actually used for mounting a
given subvolume and can be specified only once for the mount.
Subvolumes belong to a single filesystem and as implemented now all share the same
specific mount options, changes done by remount have immediate effect. This may change in
the future.
Mounting a read-write snapshot as read-only is possible and will not chnange the ro
property and flag of the subvolume.
The name of the mounted subvolume is stored in file /proc/self/mounts in the 4th column:
27 21 0:19 /subv1 /mnt rw,relatime - btrfs /dev/sda rw,space_cache
^^^^^^
INODE NUMBERS
A proper subvolume has always inode number 256. If a subvolume is nested and then a
snapshot is taken, then the cloned directory entry representing the subvolume becomes
empty and the inode has number 2. All other files and directories in the target snapshot
preserve their original inode numbers.
NOTE:
Inode number is not a filesystem-wide unique identifier, some applications assume that.
Please user pair subvolumeid:inodenumber for that purpose.
PERFORMANCE
Subvolume creation needs to flush dirty data that belong to the subvolume, this step may
take some time, otherwise once there's nothing else to do, the snapshot is instant and in
the metadata it only creates a new tree root copy.
Snapshot deletion has two phases: first its directory is deleted and the subvolume is
added to a list, then the list is processed one by one and the data related to the
subvolume get deleted. This is usually called cleaning and can take some time depending on
the amount of shared blocks (can be a lot of metadata updates), and the number of
currently queued deleted subvolumes.
SUBVOLUME AND SNAPSHOT
A subvolume is a part of filesystem with its own independent file/directory hierarchy.
Subvolumes can share file extents. A snapshot is also subvolume, but with a given initial
content of the original subvolume.
NOTE:
A subvolume in btrfs is not like an LVM logical volume, which is block-level snapshot
while btrfs subvolumes are file extent-based.
A subvolume looks like a normal directory, with some additional operations described
below. Subvolumes can be renamed or moved, nesting subvolumes is not restricted but has
some implications regarding snapshotting.
A subvolume in btrfs can be accessed in two ways:
• like any other directory that is accessible to the user
• like a separately mounted filesystem (options subvol or subvolid)
In the latter case the parent directory is not visible and accessible. This is similar to
a bind mount, and in fact the subvolume mount does exactly that.
A freshly created filesystem is also a subvolume, called top-level, internally has an id
5. This subvolume cannot be removed or replaced by another subvolume. This is also the
subvolume that will be mounted by default, unless the default subvolume has been changed
(see subcommand set-default).
A snapshot is a subvolume like any other, with given initial content. By default,
snapshots are created read-write. File modifications in a snapshot do not affect the files
in the original subvolume.
SUBCOMMAND
create [-i <qgroupid>] [<dest>/]<name>
Create a subvolume name in dest.
If dest is not given, subvolume name will be created in the current directory.
Options
-i <qgroupid>
Add the newly created subvolume to a qgroup. This option can be given
multiple times.
delete [options] [<subvolume> [<subvolume>...]], delete -i|--subvolid <subvolid> <path>
Delete the subvolume(s) from the filesystem.
If subvolume is not a subvolume, btrfs returns an error but continues if there are
more arguments to process.
If --subvolid is used, path must point to a btrfs filesystem. See btrfs subvolume
list or btrfs inspect-internal rootid how to get the subvolume id.
The corresponding directory is removed instantly but the data blocks are removed
later in the background. The command returns immediately. See btrfs subvolume sync
how to wait until the subvolume gets completely removed.
The deletion does not involve full transaction commit by default due to performance
reasons. As a consequence, the subvolume may appear again after a crash. Use one
of the --commit options to wait until the operation is safely stored on the device.
The default subvolume (see btrfs subvolume set-default) cannot be deleted and
returns error (EPERM) and this is logged to the system log. A subvolume that's
currently involved in send (see btrfs send) also cannot be deleted until the send
is finished. This is also logged in the system log.
Options
-c|--commit-after
wait for transaction commit at the end of the operation.
-C|--commit-each
wait for transaction commit after deleting each subvolume.
-i|--subvolid <subvolid>
subvolume id to be removed instead of the <path> that should point to the
filesystem with the subvolume
-v|--verbose
(deprecated) alias for global -v option
find-new <subvolume> <last_gen>
List the recently modified files in a subvolume, after last_gen generation.
get-default <path>
Get the default subvolume of the filesystem path.
The output format is similar to subvolume list command.
list [options] [-G [+|-]<value>] [-C [+|-]<value>] [--sort=rootid,gen,ogen,path] <path>
List the subvolumes present in the filesystem path.
For every subvolume the following information is shown by default:
ID ID gen generation top level parent_ID path path
where ID is subvolume's (root)id, generation is an internal counter which is
updated every transaction, parent_ID is the same as the parent subvolume's id, and
path is the relative path of the subvolume to the top level subvolume. The
subvolume's ID may be used by the subvolume set-default command, or at mount time
via the subvolid= option.
Options
Path filtering:
-o print only subvolumes below specified <path>.
-a print all the subvolumes in the filesystem and distinguish between absolute
and relative path with respect to the given path.
Field selection:
-p print the parent ID (parent here means the subvolume which contains this
subvolume).
-c print the ogeneration of the subvolume, aliases: ogen or origin generation.
-g print the generation of the subvolume (default).
-u print the UUID of the subvolume.
-q print the parent UUID of the subvolume (parent here means subvolume of which
this subvolume is a snapshot).
-R print the UUID of the sent subvolume, where the subvolume is the result of a
receive operation.
Type filtering:
-s only snapshot subvolumes in the filesystem will be listed.
-r only readonly subvolumes in the filesystem will be listed.
-d list deleted subvolumes that are not yet cleaned.
Other:
-t print the result as a table.
Sorting:
By default the subvolumes will be sorted by subvolume ID ascending.
-G [+|-]<value>
list subvolumes in the filesystem that its generation is >=, <= or = value.
'+' means >= value, '-' means <= value, If there is neither '+' nor '-', it
means = value.
-C [+|-]<value>
list subvolumes in the filesystem that its ogeneration is >=, <= or = value.
The usage is the same to -G option.
--sort=rootid,gen,ogen,path
list subvolumes in order by specified items. you can add + or - in front of
each items, + means ascending, - means descending. The default is ascending.
for --sort you can combine some items together by ,, just like
--sort=+ogen,-gen,path,rootid.
set-default [<subvolume>|<id> <path>]
Set the default subvolume for the (mounted) filesystem.
Set the default subvolume for the (mounted) filesystem at path. This will hide the
top-level subvolume (i.e. the one mounted with subvol=/ or subvolid=5). Takes
action on next mount.
There are two ways how to specify the subvolume, by id or by the subvolume path.
The id can be obtained from btrfs subvolume list, btrfs subvolume show or btrfs
inspect-internal rootid.
show [options] <path>
Show more information about a subvolume (UUIDs, generations, times, flags, related
snapshots).
/mnt/btrfs/subvolume
Name: subvolume
UUID: 5e076a14-4e42-254d-ac8e-55bebea982d1
Parent UUID: -
Received UUID: -
Creation time: 2018-01-01 12:34:56 +0000
Subvolume ID: 79
Generation: 2844
Gen at creation: 2844
Parent ID: 5
Top level ID: 5
Flags: -
Snapshot(s):
Options
-r|--rootid <ID>
show details about subvolume with root ID, looked up in path
-u|--uuid UUID
show details about subvolume with the given UUID, looked up in path
snapshot [-r] [-i <qgroupid>] <source> <dest>|[<dest>/]<name>
Create a snapshot of the subvolume source with the name name in the dest directory.
If only dest is given, the subvolume will be named the basename of source. If
source is not a subvolume, btrfs returns an error.
Options
-r Make the new snapshot read only.
-i <qgroupid>
Add the newly created subvolume to a qgroup. This option can be given
multiple times.
sync <path> [subvolid...]
Wait until given subvolume(s) are completely removed from the filesystem after
deletion. If no subvolume id is given, wait until all current deletion requests are
completed, but do not wait for subvolumes deleted in the meantime.
Options
-s <N> sleep N seconds between checks (default: 1)
EXAMPLES
Deleting a subvolume
If we want to delete a subvolume called foo from a btrfs volume mounted at /mnt/bar we
could run the following:
btrfs subvolume delete /mnt/bar/foo
EXIT STATUS
btrfs subvolume returns a zero exit status if it succeeds. A non-zero value is returned in
case of failure.
AVAILABILITY
btrfs is part of btrfs-progs. Please refer to the btrfs wiki http://btrfs.wiki.kernel.org
for further details.
SEE ALSO
mkfs.btrfs(8), mount(8), btrfs-quota(8), btrfs-qgroup(8), btrfs-send(8)
COPYRIGHT
2022