Provided by: corosync_3.1.6-2ubuntu1_amd64 bug

NAME

       corosync-cfgtool - An administrative tool for corosync.

SYNOPSIS

       corosync-cfgtool  [[-i  IP_address]  [-b] [-s] [-n] [-R] [-L] [-k nodeid] [-a nodeid] [-h]
       [-H] [--force]

DESCRIPTION

       corosync-cfgtool A tool for displaying and configuring active parameters within corosync.

OPTIONS

       -i     Finds only information about the specified interface IP address or link id with -s.

       -s     Displays the status of the current links on this node for UDP/UDPU,  with  extended
              status  for  KNET.   After each link, the nodes on that link are displayed in order
              with their status, for example there are 3 nodes with KNET transport:

              LINK ID 0
                      addr    = 192.168.100.80
                      status:
                              nodeid  1:      localhost
                              nodeid  2:      connected
                              nodeid  3:      connected

              Please note that only one link is returned for a single node cluster configuration,
              no matter how many links are configured.

       -b     Displays the brief status of the current links on this node when used with "-s". If
              any interfaces are faulty, 1 is returned by  the  binary.  If  all  interfaces  are
              active  0  is  returned  to the shell.  After each link, the nodes on that link are
              displayed in order with their status encoded into a  single  digit,  or  characters
              'n', 'd' and '?' with special meaning.  1=link enabled, 2=link connected, So a 3 in
              a node position indicates that the link  is  both  enabled  and  connected.  Status
              represented  by  character 'n' is used for localhost link. Character '?' means that
              Corosync was unable to get status of  link  from  knet  (log  should  contain  more
              information).  Character 'd' shouldn't appear and it means that Corosync was unable
              to configure a link and it is result of some error which should have been logged.

              The output will be:

              LINK ID 0
                      addr    = 192.168.100.80
                      status  = n33

       -n     Displays the status of the current nodes in the system with their link status(es).

       Local node ID 1, transport knet
       nodeid: 2 reachable   onwire (min/max/cur): 0, 1, 1
          LINK: 0 (192.168.1.101->192.168.1.102)  enabled connected mtu: 1397
          LINK: 1 (192.168.4.1->192.168.4.2)  enabled mtu: 469
          LINK: 2 (192.168.9.1->192.168.9.2)  enabled mtu: 469

       Only reachable nodes are displayed so "reachable" should always be there.
       ‘onwire’ versions  are  the  knet  on-wire  versions  that  are  supported/in  use  (where
       appropriate).
       IP  addresses  are the local and remote IP addresses (for UDP[U] only the local IP address
       is shown)
       enabled - means the link has been brought up
       connected - means that the link is connected to the remote node
       dynconnected - is not currently implemented
       mtu - shows the size of data packets. Should be the link packet size less a  small  amount
       for protocol overheads and encryption

       -R     Tell all instances of corosync in this cluster to reload corosync.conf.

              Running  corosync-cfgtool -R where nodes are running different versions of corosync
              (including minor versions) is unsupported and may result in undefined behaviour.

       -L     Tell corosync to reopen all  logging  files.  In  contrast  to  other  subcommands,
              nothing is displayed on terminal if call is successful.

       -k     Kill a node identified by node id.

       -a     Display the IP address(es) of a node.

       -h     Print basic usage.

       -H     Shutdown  corosync  cleanly  on  this  node.   corosync-cfgtool  -H  will request a
              shutdown from corosync, which means it will consult any interested  daemons  before
              shutting  down  and  the  shutdown maybe vetoed if a daemon regards the shutdown as
              inappropriate.  If --force is added to the command line then corosync will shutdown
              regardless of the daemons' opinions on the matter.

SEE ALSO

       corosync_overview(7),

AUTHOR

       Angus Salkeld

                                            2020-06-02                        COROSYNC-CFGTOOL(8)