Provided by: wide-dhcpv6-server_20080615-23build1_amd64 bug

NAME

     dhcp6s — DHCPv6 server

SYNOPSIS

     dhcp6s [-c configfile] [-Ddf] [-k ctlkeyfile] [-p ctlport] [-P pid-file] interface

DESCRIPTION

     dhcp6s replies to DHCPv6 client as DHCPv6 server.  dhcp6s can give the following information
     to clients.
        IPv6 prefixes for the requesting site
        Non-temporary IPv6 addresses
        A list of the DNS server addresses
        DNS Domain Search List
        A list of the NTP server addresses
        A list of the SIP server addresses
        SIP Server domain name
        A list of the NIS server addresses
        NIS domain name
        A list of the NIS+ server addresses
        NIS+ domain name
        A list of the BCMCS server addresses
        BCMCS Server domain name

     Command line options are as below:

     -c configfile
             Use configfile as the configuration file.

     -d      Print debugging messages.

     -D      Even more debugging information is printed.

     -f      Foreground mode (useful when debugging).  Although dhcp6s usually prints warning,
             debugging, or error messages to syslog(8), it prints the messages to standard error
             if this option is specified.

     -k ctlkeyfile
             Use ctlkeyfile to store the shared secret to authenticate the communication with
             dhcp6ctl.  The default file name used when unspecified is
             /etc/wide-dhcpv6/dhcp6sctlkey.  The default name is intentionally same as that for
             dhcp6ctl so that the server and the control command can share the file when dhcp6ctl
             controls the server on the same node, which should be the typical case.

     -p ctlport
             Use ctlport as the port number listening on to communicate with dhcp6ctl.

     -P pid-file
             Use pid-file to dump the process ID of dhcp6s.

FILES

     /etc/wide-dhcpv6/dhcp6s.conf  is the default configuration file.
     /var/lib/dhcpv6/dhcp6s_duid   is the default file to store the server's DUID.
     /etc/wide-dhcpv6/dhcp6sctlkey
                                   is the default key file to communicate with the control
                                   command.  See dhcp6ctl(8) for the file format.
     /var/run/dhcp6s.pid           is the default file that contains pid of the currently running
                                   dhcp6s.

SEE ALSO

     dhcp6s.conf(5), dhcp6ctl(8), dhcp6c(8)

     Ralph Droms, Editor, Dynamic Host Configuration Protocol for IPv6 (DHCPv6), RFC 3315, 2003.

HISTORY

     The dhcp6s command first appeared in WIDE/KAME IPv6 protocol stack kit.

     The -n dnsserv command-line option was obsoleted by introducing a configuration file.

BUGS

     dhcp6s is incomplete and violates DHCPv6 protocol spec, in several aspects.  To name a few:

     1.   it does not assign temporary IPv6 addresses (nor will).