Provided by: dkms_3.0.6-2ubuntu1_all 
NAME
dkms - Dynamic Kernel Module Support
SYNOPSIS
dkms [action] [options] [module/module-version] [/path/to/source-tree]
[/path/to/tarball.tar] [/path/to/driver.rpm]
DESCRIPTION
dkms is a framework which allows kernel modules to be dynamically built for each kernel on
your system in a simplified and organized fashion.
ACTIONS
add [module/module-version] [/path/to/source-tree] [/path/to/tarball.tar]
Adds a module/module-version combination to the tree for builds and installs. If
module/module-version, -m module/module-version, or -m module -v version are passed as
options, this command requires source in /usr/src/<module>-<module-version>/ as well
as a properly formatted dkms.conf file. If /path/to/source-tree is passed as an
option, and source-tree contains a dkms.conf file, it will copy /path/to/source-tree
to /usr/src/module-module-version. If /path/to/tarball.tar is passed, this command
behaves like the ldtarball command.
remove [module/module-version] [-k kernel/arch] [--all]
Removes a module/version or module/version/kernel/arch combination from the tree. If
the module is currently installed, it first uninstalls it and if applicable, will
replace it with its original_module. Use the --all option in order to remove all
instances for every kernel at once.
build [module/module-version] [-k kernel/arch]
Builds the specified module/version combo for the specified kernel/arch. If the -k
option is not specified it builds for the currently running kernel and arch. All
builds occur in the directory /var/lib/dkms/<module>/<module-version>/build/. If the
module/module-version combo has not been added, dkms will try to add it, and in that
case build can take the same arguments that add can.
unbuild [module/module-version] [-k kernel/arch] [--all]
Undoes the build for a module/version or module/version/kernel/arch combination from
the tree. If the module is currently installed, it first uninstalls it and if
applicable, will replace it with its original_module. Finally all binary kernel
modules are removed. Use the --all option in order to remove all instances for every
kernel at once.
install [module/module-version] [-k kernel/arch] [/path/to/driver.rpm]
Installs a built module/version combo onto the kernel it was built for. If the kernel
option is not specified it assumes the currently running kernel. If the module has
not been built, dkms will try to build it. If the module has not been added, dkms
will try to add it. In both cases, the install command can then take the same
arguments as the build or add commands. If you pass a .rpm file, dkms will try to
install that file with rpm -Uvh , and it will perform an autoinstall action to be sure
that everything is built for your kernel if the RPM installed successfully.
uninstall [module/module-version] [-k kernel/arch] [--all]
Uninstalls an installed module/module-version combo from the kernel/arch passed in the
-k option, or the current kernel if the -k option was not passed. Use the --all option
in order to uninstall all instances for every kernel at once. After uninstall
completion, the driver will be left in the built state. To completely remove a
driver, the remove action should be utilized.
match [--templatekernel kernel/arch] [-k kernel/arch]
Match installs modules onto the specified kernel by looking at the configuration of
the specified templatekernel. Every module that is installed on the templatekernel
within dkms is then installed on that specified kernel.
mktarball [module/module-version] [-k kernel/arch] [--archive /path/to/tarball.tar]
[--source-only] [--binaries-only]
Creates a tarball archive for the specified module/version of all files in the DKMS
tree for that module/version combination. This includes the source and any built
modules for kernels in the tree (as specified). Otherwise, you can specify a singular
kernel to archive only, or multiple kernels to archive (-k kernel1/arch1 -k
kernel2/arch2). Optionally, you can use --archive to specify the file that you would
like to save this tarball to. You can also specify --binaries-only if you want the
resultant tarball not to include the module source. Likewise, --source-only can be
used to specify that no prebuilt binaries should be included in the tarball. In
general, mktarball is great for systems management purposes as you can build your
driver on just one system and then use ldtarball on all of your other systems to get
the same built modules loaded without having to wait for anything to compile.
ldtarball [/path/to/tarball.tar] [--force]
This takes a tarball made from the mktarball command and loads it into your DKMS tree.
This will leave any newly added modules in the built state and dkms install should
then be called to install any of them. If files already exist where ldtarball is
attempting to place them, it will warn and not copy over them. The --force option
should be used to override this.
status [module/module-version] [-k kernel/arch]
Returns the current status of modules, versions and kernels within the tree as well as
whether they have been added, built or installed. Status can be shown for just a
certain module, a certain kernel, a module/version combination or a
module/version/kernel combination.
autoinstall
Attempt to install the latest revision of all modules that have been installed for
other kernel revisions. dkms_autoinstaller is a stub that uses this action to perform
its work.
OPTIONS
-m <module>/<module-version>
The name of the module and module version you want to operate on. The -m part of
this option is optional, and can be omitted in virtually all circumstances.
-v <module-version>
The version of the module to execute the specified action upon. This option only
has to be specified if you pass a -m option without a <module-version> component of
its own.
-k <kernel-version>/<arch>
The kernel and arch to perform the action upon. You can specify multiple kernel
version/arch pairs on the command line by repeating the -k argument with a
different kernel version and arch. However, not all actions support multiple
kernel versions (it will error out in this case). The arch part can be omitted,
and DKMS will assume you want it to be the arch of the currently running system.
-a, --arch
The system architecture to perform the action upon. It is optional if you pass it
as part of the -k option. If not specified, it assumes the arch of the currently
running system (`uname -m`). You can specify multiple arch parameters on the same
command line by repeating the -a argument with a different arch name. When multiple
architectures are specified, there must be a 1:1 relationship between -k arguments
to -a arguments. DKMS will then assume the first -a argument aligns with the first
-k kernel and so on for the second, third, etc.
For example, if you were to specify: -k kernel1 -k kernel2 -a i386 -k kernel3 -a
i686 -a x86_64, DKMS would process this as: kernel1-i386, kernel2-i686,
kernel3-x86_64.
-q, --quiet
Quiet.
-V, --version
Prints the currently installed version of dkms and exits.
-c <dkms.conf-location>
The location of the dkms.conf file. This is needed for the add action and if not
specified, it is assumed to be located in /usr/src/<module>-<module-version>/. See
below for more information on the format of dkms.conf.
--config <kernel-.config-location>
During a build this option is used to specify an alternate location for the kernel
.config file which was used to compile that kernel. Normally, dkms uses the Red Hat
standard location and config filenames located in /usr/src/linux-<kernel>/configs/.
If the config for the kernel that you are building a module for is not located here
or does not have the expected name in this location, you will need to tell dkms
where the necessary .config can be found so that your kernel can be properly
prepared for the module build.
--archive <tarball-location>
This option is used during a ldtarball action to specify the location of the
tarball you wish to load into your DKMS tree. You only have to specify the
--archive part of this option if <tarball-location> does not already exist as a
file.
--templatekernel <kernel-version>
This option is required for the action: match. Match will look at the
templatekernel specified and install all of the same module/version combinations on
the other kernel.
--force
This option can be used in conjunction with ldtarball to force copying over of
extant files.
--binaries-only
This option can be used in conjunction with mktarball in order to create a DKMS
tarball which does not contain the source for the module within it. This can be
helpful in reducing the size of the tarball if you know that the system which this
tarball will be loaded upon already has the source installed. In order to load a
tarball made as binaries-only you must have the module source in that systems DKMS
tree. If you do not, DKMS will refuse to load a binaries-only tarball.
--source-only
This option can be used in conjunction with mktarball but do not want the tarball
you create to have any prebuilt modules within it, passing this option will keep
its internal DKMS tarball from containing any prebuilt modules.
--all This option can be used to automatically specify all relevant kernels/arches for a
module/module-version. This can be used for things like remove, unbuild and
uninstall. This saves the trouble of having to actually specify -k kernel1 -a arch1
-k kernel2 -a arch2 for every kernel you have built your module for.
--no-depmod
This option prevents DKMS from running the depmod command during install and
uninstall which will avoid (re)calculating module dependencies and thereby save
time.
--modprobe-on-install
This option executes modprobe on the modules upon successful installation.
--kernelsourcedir <kernel-source-directory-location>
Using this option you can specify the location of your kernel source directory.
Most likely you will not need to set this if your kernel source is accessible via
/lib/modules/$kernel_version/build.
--directive <"cli-directive=cli-value">
Using this option, you can specify additional directives from the command line. The
--directive option can be used multiple times on the same command-line to specify
multiple additional command line directives.
--rpm_safe_upgrade
This flag should be used when packaging DKMS enabled modules in RPMs. It should be
specified during both the add and remove actions in the RPM spec to ensure that
DKMS and RPM behave correctly in all scenarios when upgrading between various
versions of a dkms enabled module RPM package.
--dkmstree path/to/place
Provides a destination tree for building and installing modules to. Useful in cases
that you don't want to contaminate a system when using solely for building.
--sourcetree path/to/place
Provides a location to build a DKMS package from. Useful for systems that you may
not have root access, but would still like to be able to build DKMS packages.
--installtree path/to/place
Provides a location to place modules when a dkms install command is issued.
-j number
Run no more than number jobs in parallel; see the -j option of make(1). Defaults
to the number of CPUs in the system, detected by nproc(1). Specify 0 to impose no
limit on the number of parallel jobs.
ORIGINAL MODULES
During the first install of a module for a <kernelversion>, dkms will search
/lib/modules/<kernelversion> for a pre-existing module of the same name. If one is found,
it will automatically be saved as an "original_module" so that if the newer module is
later removed, dkms will put the original module back in its place. Currently, DKMS
searches for these original modules with first preference going to modules located in
/lib/modules/<kernelversion>/updates/ followed by $DEST_MODULE_LOCATION (as specified in
dkms.conf ). If one cannot be found in either location, a find will be used to locate one
for that kernel. If none are found, then during a later uninstall, your kernel will not
have that module replaced.
If more than one is found, then the first one located (by preference indicated above) will
be considered the "original_module". As well, all copies of the same-named module will be
removed from your kernel tree and placed into
/var/lib/dkms/<module>/original_module/$kernelver/collisions so that they can be
*manually* accessible later. DKMS will never actually do anything with the modules found
underneath the /collisions directory, and they will be stored there until you manually
delete them.
DKMS.CONF
When performing an add , a proper dkms.conf file must be found. A properly formatted conf
file is essential for communicating to dkms how and where the module should be installed.
While not all the directives are required, providing as many as possible helps to limit
any ambiguity. Note that the dkms.conf is really only a shell-script of variable
definitions which are then sourced in by the dkms executable (of the format,
DIRECTIVE="directive text goes here"). As well, the directives are case-sensitive and
should be given in ALL CAPS.
It is important to understand that many of the DKMS directives are arrays whose index
values are tied together. These array associations can be considered families, and there
are currently three such families of directive arrays. MAKE[#] and MAKE_MATCH[#] make up
one family. PATCH[#] and PATCH_MATCH[#] make up the second family. The third and largest
family consists of BUILT_MODULE_NAME[#], BUILT_MODULE_LOCATION[#], DEST_MODULE_NAME[#],
DEST_MODULE_LOCATION[#] and STRIP[#]. When indexing these arrays when creating your
dkms.conf, each family should start at index value 0.
MAKE[#]=
The MAKE directive array tells DKMS which make command should be used for building
your module. The default make command should be put into MAKE[0]. Other entries in
the MAKE array will only be used if their corresponding entry in MAKE_MATCH[#]
matches, as a regular expression (using egrep), the kernel that the module is being
built for. Note that if no value is placed in MAKE_MATCH[#] for any MAKE[#] where
# > 0, then that MAKE directive is ignored. MAKE_MATCH[0] is optional and if it is
populated, it will be used to determine if MAKE[0] should be used to build the
module for that kernel. If multiple MAKE_MATCH directives match against the kernel
being built for, the last matching MAKE[#] will be used to build your module. If no
MAKE directive is specified or if no MAKE_MATCH matches the kernel being built for,
DKMS will attempt to use a generic MAKE command to build your module.
KERNELRELEASE will be automatically appended to MAKE[#]. If you want to suppress
this behavior, you can quote the make command: 'make'.
MAKE_MATCH[#]=
See the above entry on MAKE[#] directives. This array should be populated with
regular expressions which, when matched against the kernel being built for, will
tell DKMS to use the corresponding make command in the MAKE[#] directive array to
build your module.
BUILT_MODULE_NAME[#]=
This directive gives the name of the module just after it is built. If your DKMS
module package contains more than one module to install, this is a required
directive for all of the modules. This directive should explicitly not contain any
trailing ".o" or ".ko". Note that for each module within a dkms package, the
numeric value of # must be the same for each of BUILT_MODULE_NAME,
BUILT_MODULE_LOCATION, DEST_MODULE_NAME and DEST_MODULE_LOCATION and that the
numbering should start at 0 (eg. BUILT_MODULE_NAME[0]="qla2200"
BUILT_MODULE_NAME[1]="qla2300").
BUILT_MODULE_LOCATION[#]=
This directive tells DKMS where to find your built module after it has been built.
This pathname should be given relative to the root directory of your source files
(where your dkms.conf file can be found). If unset, DKMS expects to find your
BUILT_MODULE_NAME[#] in the root directory of your source files. Note that for
each module within a dkms package, the numeric value of # must be the same for each
of BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME and
DEST_MODULE_LOCATION and that the numbering should start at 0 (eg.
BUILT_MODULE_LOCATION[0]="some/dir/" BUILT_MODULE_LOCATION[1]="other/dir/").
DEST_MODULE_NAME[#]=
This directive can be used to specify the name of the module as it should be
installed. This will rename the module from BUILT_MODULE_NAME[#] to
DEST_MODULE_NAME[#]. This directive should explicitly not contain any trailing
".o" or ".ko". If unset, it is assumed to be the same value as
BUILT_MODULE_NAME[#]. Note that for each module within a dkms package, the numeric
value of # must be the same for each of BUILT_MODULE_NAME, BUILT_MODULE_LOCATION,
DEST_MODULE_NAME and DEST_MODULE_LOCATION and that the numbering should start at 0
(eg. DEST_MODULE_NAME[0]="qla2200_6x" DEST_MODULE_NAME[1]="qla2300_6x").
DEST_MODULE_LOCATION[#]=
This directive specifies the destination where a module should be installed to,
once compiled. It also is used for finding original_modules. This is a required
directive, except as noted below. This directive must start with the text "/kernel"
which is in reference to /lib/modules/<kernelversion>/kernel. Note that for each
module within a dkms package, the numeric value of # must be the same for each of
BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME and DEST_MODULE_LOCATION
and that the numbering should start at 0 (eg.
DEST_MODULE_LOCATION[0]="/kernel/drivers/something/"
DEST_MODULE_LOCATION[1]="/kernel/drivers/other/").
DEST_MODULE_LOCATION is ignored on Fedora and Red Hat Enterprise Linux, Novell SuSE
Linux Enterprise Server 10 and higher, Novell SuSE Linux 10.0 and higher, and
Ubuntu. Instead, the proper distribution-specific directory is used.
STRIP[#]=
By default strip is considered to be "yes". If set to "no", DKMS will not run strip
-g against your built module to remove debug symbols from it. STRIP[0] is used as
the default for any unset entries in the STRIP array.
PACKAGE_NAME=
This directive is used to give the name associated with the entire package of
modules. This is the same name that is used with the -m option when building,
adding, etc. and may not necessarily be the same as the MODULE_NAME. This directive
must be present in every dkms.conf.
PACKAGE_VERSION=
This directive is used to give the version associated with the entire package of
modules being installed within that dkms package. This directive must be present in
every dkms.conf.
CLEAN= CLEAN specifies the make clean command to be used to clean up both before and after
building the module. If unset, it is assumed to be "make clean".
OBSOLETE_BY=
This directive allows you to specify a kernel version that obsoletes the necessity
for this particular DKMS module. This can be specified as a particular upstream
kernel or an ABI bump of a kernel. For example, "2.6.24" would be an upstream
kernel and "2.6.24-16" would represent an ABI bump for a kernel. Both are valid in
this area.
Please avoid the use of OBSOLETE_BY wherever possible. It's use indicates a lack of
proper module versioning using MODULE_VERSION() tags in the module source itself.
It is better to fix the MODULE_VERSION() tags than use OBSOLETE_BY. This also
introduces a implicit distribution/version dependency on the package, as the value
of OBSOLETE_BY is meaningful only in the context of a single distribution/version.
If you feel you must use it, please use as such in dkms.conf:
ubuntu_804="Ubuntu
8.04"
if [ -x /usr/bin/lsb_release ]; then
if [ "$(/usr/bin/lsb_release -sir)" == "${ubuntu_804}" ]; then
OBSOLETE_BY="2.6.25"
fi
fi
PATCH[#]=
Use the PATCH directive array to specify patches which should be applied to your
source before a build occurs. All patches are expected to be in -p1 format and are
applied with the patch -p1 command. Each directive should specify the filename of
the patch to apply, and all patches must be located in the patches subdirectory of
your source directory ( /usr/src/<module>-<module-version>/patches/ ). If any patch
fails to apply, the build will be halted and the rejections can be inspected in
/var/lib/dkms/<module>/<module-version>/build/. If a PATCH should only be applied
conditionally, the PATCH_MATCH[#] array should be used, and a corresponding regular
expression should be placed in PATCH_MATCH[#] which will alert dkms to only use
that PATCH[#] if the regular expression matches the kernel which the module is
currently being built for.
PATCH_MATCH[#]=
See the above description for PATCH[#] directives. If you only want a patch applied
in certain scenarios, the PATCH_MATCH array should be utilized by giving a regular
expression which matches the kernels you intend the corresponding PATCH[#] to be
applied to before building that module.
AUTOINSTALL=
If this directive is set to yes then the service
/etc/rc.d/init.d/dkms_autoinstaller will automatically try to install this module
on any kernel you boot into. See the section on dkms_autoinstaller for more
information.
BUILD_DEPENDS[#]=
This optional directive is an array that allows you to specify other modules as
dependencies for your module. Each array element should be the PACKAGE_NAME of
another module that is managed by dkms. Do not specify a version or architecture in
the dependency. Note that this directive is only advisory; missing or broken
dependencies cause non-fatal warnings.
BUILD_EXCLUSIVE_KERNEL=
This optional directive allows you to specify a regular expression which defines
the subset of kernels which DKMS is allowed to build your module for. If the kernel
being built for does not match against this regular expression, the dkms build will
error out. For example, if you set it as ="^2.4.*", your module would not be built
for 2.6 kernels.
BUILD_EXCLUSIVE_ARCH=
This optional directive functions very similarly to BUILD_EXCLUSIVE_KERNEL except
that it matches against the kernel architecture. For example, if you set it to
="i.86", your module would not be built for ia32e, x86_64, amd64, s390, etc.
POST_ADD=
The name of the script to be run after an add is performed. The path should be
given relative to the root directory of your source.
POST_BUILD=
The name of the script to be run after a build is performed. The path should be
given relative to the root directory of your source.
POST_INSTALL=
The name of the script to be run after an install is performed. The path should be
given relative to the root directory of your source.
POST_REMOVE=
The name of the script to be run after a remove is performed. The path should be
given relative to the root directory of your source.
PRE_BUILD=
The name of the script to be run before a build is performed. The path should be
given relative to the root directory of your source.
PRE_INSTALL=
The name of the script to be run before an install is performed. The path should be
given relative to the root directory of your source. If the script exits with a
non-zero value, the install will be aborted. This is typically used to perform a
custom version comparison.
DKMS.CONF VARIABLES
Within your dkms.conf file, you can use certain variables which will be replaced at
run-time with their values.
$kernelver
This variable can be used within a directive definition and during use, the actual
kernel version in question will be substituted in its place. This is especially
useful in MAKE commands when specifying which INCLUDE statements should be used
when compiling your module (eg. MAKE="make all
INCLUDEDIR=/lib/modules/${kernelver}/build/include").
$dkms_tree
See the section on /etc/dkms/framework.conf for more information. This variable
represents the location of the DKMS tree on the local system. By default this is
/var/lib/dkms , but this value should not be hard-coded into a dkms.conf in the
event that the local user has changed it on their system.
$source_tree
See the section on /etc/dkms/framework.conf for more information. This variable
represents the location where DKMS keeps source on the local system. By default
this is /usr/src , but this value should not be hard-coded into a dkms.conf in the
event that the local user has changed it on their system.
$kernel_source_dir
This variable holds the value of the location of your kernel source directory.
Usually, this will be /lib/modules/$kernelver/build , unless otherwise specified
with the --kernelsourcedir option.
DKMS.CONF OVERRIDES
You can override the module-provided dkms.conf files. Every time after a dkms.conf file is
read, dkms will look for and read the following files in order:
/etc/dkms/<module>.conf
/etc/dkms/<module>-<module-version>.conf
/etc/dkms/<module>-<module-version>-<kernel>.conf
/etc/dkms/<module>-<module-version>-<kernel>-<arch>.conf
You can use these files to override settings in the module-provided dkms.conf files.
/etc/dkms/framework.conf
This configuration file controls how the overall DKMS framework handles. It is sourced in
every time the dkms command is run. Mainly it can currently be used to set different
default values for the variables.
Additionally to /etc/dkms/framework.conf, any file matching the glob
/etc/dkms/framework.conf.d/*.conf will be loaded as well.
$dkms_tree, $source_tree, $install_tree
control where DKMS looks for its framework.
$symlink_modules
controls whether binary modules are copied to /lib/modules or if only symlinks are
created there. Note that these variables can also be manipulated on the command
line with --dkmstree, --sourcetree, --installtree and --symlink-modules options.
$autoinstall_all_kernels
used by the common postinst for DKMS modules. It controls if the build should be
done for all installed kernels or only for the current and latest installed kernel.
It has no command line equivalent.
dkms_autoinstaller
This boot-time service automatically installs any module which has AUTOINSTALL="yes" set
in its dkms.conf file. The service works quite simply and if multiple versions of a module
are in your system's DKMS tree, it will not do anything and instead explain that manual
intervention is required.
AUTHOR
Gary Lerhaupt
WEBPAGE
https://github.com/dell/dkms
MAILING-LIST
dkms-devel@dell.com http://lists.us.dell.com/mailman/listinfo/dkms-devel