Provided by: fence-agents-extra_4.11.0-1ubuntu2_amd64 
NAME
fence_pve - Fencing agent for the Proxmox Virtual Environment
DESCRIPTION
The fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized
cluster.
fence_pve accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_pve can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.proxmox.com/
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-a, --ip=[ip]
IP Address or Hostname of a node within the Proxmox cluster. This parameter is
always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 8006)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Id of the virtual machine. This parameter is always required.
-l, --username=[name]
Login name (Default Value: root@pam)
-N, --pve-node=[node_name]
Proxmox node name on which machine is located. (Must be specified if not using
--pve-node-auto)
-A, --pve-node-auto
Automatically select proxmox node. (This option overrides --pve-node)
--vmtype
Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)
--nodename
Replaced by --pve-node
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more
then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can
be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
ip IP Address or Hostname of a node within the Proxmox cluster. This parameter is
always required. Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 8006)
method Method to fence (onoff|cycle) (Default Value: onoff)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Id of the virtual machine. This parameter is always required. Obsoletes: port
username
Login name (Default Value: root@pam) Obsoletes: login
pve_node
Proxmox node name on which machine is located. (Must be specified if not using
--pve-node-auto)
pve_node_auto
Automatically select proxmox node. (This option overrides --pve-node)
vmtype Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)
nodename
Replaced by --pve-node Obsoletes: node_name
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 1)