Provided by: lvm2_2.03.16-1ubuntu1_amd64 bug

NAME

       lvremove — Remove logical volume(s) from the system

SYNOPSIS

       lvremove position_args
           [ option_args ]

DESCRIPTION

       lvremove  removes one or more LVs. For standard LVs, this returns the logical extents that
       were used by the LV to the VG for use by other LVs.

       Confirmation will be requested before deactivating any active LV prior  to  removal.   LVs
       cannot  be  deactivated  or  removed  while they are open (e.g.  if they contain a mounted
       filesystem). Removing an origin LV will also remove all dependent snapshots.

       When a single force option is used, LVs are removed without confirmation, and the  command
       will try to deactivate unused LVs.

       To remove damaged LVs, two force options may be required (-ff).

       Historical LVs

       If  the  configuration  setting  metadata/record_lvs_history  is  enabled and the LV being
       removed forms part of the history of at least  one  LV  that  is  still  present,  then  a
       simplified  representation  of  the LV will be retained. This includes the time of removal
       (lv_time_removed reporting field),  creation  time  (lv_time),  name  (lv_name),  LV  uuid
       (lv_uuid)  and VG name (vg_name). This allows later reporting to see the ancestry chain of
       thin snapshot volumes, even after some intermediate LVs have been removed.  The  names  of
       such  historical  LVs  acquire  a  hyphen  as  a  prefix  (e.g.  '-lvol1')  and  cannot be
       reactivated.  Use lvremove a second time, with the hyphen, to remove  the  record  of  the
       former LV completely.

USAGE

       lvremove VG|LV|Tag|Select ...
           [ -A|--autobackup y|n ]
           [ -f|--force ]
           [ -S|--select String ]
           [    --nohistory ]
           [    --noudevsync ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       -A|--autobackup y|n
              Specifies  if  metadata should be backed up automatically after a change.  Enabling
              this is strongly advised! See vgcfgbackup(8) for more information.

       --commandprofile String
              The command profile to use for command configuration.   See  lvm.conf(5)  for  more
              information about profiles.

       --config String
              Config  settings  for the command. These override lvm.conf(5) settings.  The String
              arg uses the same format as lvm.conf(5), or  may  use  section/field  syntax.   See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set  debug  level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --devices PV
              Restricts the devices that are visible and accessible to the command.  Devices  not
              listed  will  appear to be missing. This option can be repeated, or accepts a comma
              separated list of devices. This overrides the devices file.

       --devicesfile String
              A  file  listing  devices  that  LVM  should  use.   The   file   must   exist   in
              /etc/lvm/devices/  and  is  managed with the lvmdevices(8) command.  This overrides
              the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For  testing  and
              debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --journal String
              Record  information  in  the  systemd  journal.  This information is in addition to
              information  enabled  by  the  lvm.conf  log/journal  setting.    command:   record
              information  about the command.  output: record the default command output.  debug:
              record full command debugging.

       --lockopt String
              Used to pass options for special cases  to  lvmlockd.   See  lvmlockd(8)  for  more
              information.

       --longhelp
              Display long help text.

       --nohints
              Do  not  use  the  hints  file  to  locate devices for PVs. A command may read more
              devices to find PVs when hints  are  not  used.  The  command  will  still  perform
              standard hint file invalidation where appropriate.

       --nohistory
              Do  not  record  history  of  LVs  being  removed.   This  has no effect unless the
              configuration setting metadata/record_lvs_history is enabled.

       --nolocking
              Disable locking. Use  with  caution,  concurrent  commands  may  produce  incorrect
              results.

       --noudevsync
              Disables  udev  synchronisation.  The  process  will not wait for notification from
              udev. It will  continue  irrespective  of  any  possible  udev  processing  in  the
              background.  Only  use  this  if  udev  is not running or has rules that ignore the
              devices LVM creates.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once  to
              also suppress any prompts with answer 'no'.

       --reportformat basic|json
              Overrides  current  output  format  for  reports  which  is defined globally by the
              report/output_format setting in lvm.conf(5).  basic is  the  original  format  with
              columns  and  rows.   If  there is more than one report per command, each report is
              prefixed with the report name for identification. json produces  report  output  in
              JSON format. See lvmreport(7) for more information.

       -S|--select String
              Select  objects  for  processing  and  reporting  based on specified criteria.  The
              criteria syntax is described by --select  help  and  lvmreport(7).   For  reporting
              commands,  one  row  is  displayed  for  each  object  matching  the criteria.  See
              --options help for selectable  object  fields.   Rows  can  be  displayed  with  an
              additional  "selected"  field  (-o  selected)  showing  1  if  the  row matches the
              selection and 0 otherwise.  For non-reporting commands which process LVM  entities,
              the selection is used to choose items to process.

       -t|--test
              Run  in  test  mode.  Commands  will  not  update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success  to  the  calling
              function.  This  may  lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do  not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       LV     Logical Volume name.  See lvm(8) for valid names.  An LV positional  arg  generally
              includes the VG name and LV name, e.g. VG/LV.

       Tag    Tag  name.  See lvm(8) for information about tag names and using tags in place of a
              VG, LV or PV.

       Select Select indicates that a  required  positional  parameter  can  be  omitted  if  the
              --select option is used.  No arg appears in this position.

       String See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: b|B is bytes, s|S  is  sectors  of  512
              bytes,  k|K  is  KiB,  m|M  is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

EXAMPLES

       Remove an active LV without asking for confirmation.
       lvremove -f vg00/lvol1

       Remove all LVs the specified VG.
       lvremove vg00

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
       pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
       lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)