Provided by: multipath-tools_0.8.8-1ubuntu1_amd64 bug

NAME

       multipathd - Multipath daemon.

SYNOPSIS

       multipathd [-d|-k] [-s] [-v verbosity] [-B] [-w]

DESCRIPTION

       The  multipathd  daemon  is  in charge of checking for failed paths. When this happens, it
       will reconfigure the multipath map the path belongs to,  so  that  this  map  regains  its
       maximum performance and redundancy.

       This  daemon  executes  the  external  multipath  tool  when  events  occur.  In turn, the
       multipath tool signals the multipathd daemon when it is done with devmap  reconfiguration,
       so that it can refresh its failed path list.

OPTIONS

       -d     Foreground Mode. Don't daemonize, and print all messages to stdout and stderr.

       -s     Suppress timestamps. Do not prefix logging messages with a timestamp.

       -v level
              Verbosity  level. Print additional information while running multipathd. A level of
              0 means only print errors. A level of 3 or greater prints debugging information  as
              well.

       -B     Read-only  bindings  file.  multipathd  will  not  write to the user_friendly_names
              bindings file. If a user_friendly_name doesn't already exist for a device, it  will
              use its WWID as its alias.

       -k     multipathd  will enter interactive mode. From this mode, the available commands can
              be viewed by entering 'help'. When you are finished entering commands, press CTRL-D
              to quit.

       -n     IGNORED.  Use the option find_multipaths to control the treatment of newly detected
              devices by multipathd. See multipath.conf(5).

       -w     Since kernel 4.14 a new device-mapper event polling interface is used for  updating
              multipath  devices  on  dmevents.  Use  this  flag to force it to use the old event
              waiting method, based on creating a seperate thread for each device.

COMMANDS

       The following commands can be used in interactive mode:

       list|show paths
              Show the paths that multipathd is monitoring, and their state.

       list|show paths format $format
              Show the paths that multipathd is monitoring,  using  a  format  string  with  path
              format wildcards.

       list|show maps|multipaths
              Show the multipath devices that the multipathd is monitoring.

       list|show maps|multipaths format $format
              Show the status of all multipath devices that the multipathd is monitoring, using a
              format string with multipath format wildcards.

       list|show maps|multipaths status
              Show the status of all multipath devices that the multipathd is monitoring.

       list|show maps|multipaths stats
              Show some statistics of all multipath devices that the multipathd is monitoring.

       list|show maps|multipaths topology
              Show the current multipath topology. Same as 'multipath -ll'.

       list|show topology
              Show the current multipath topology. Same as 'multipath -ll'.

       list|show map|multipath $map topology
              Show topology  of  a  single  multipath  device  specified  by  $map,  for  example
              36005076303ffc56200000000000010aa. This map could be obtained from 'list maps'.

       list|show wildcards
              Show the format wildcards used in interactive commands taking $format.

       list|show config
              Show  the  currently  used  configuration,  derived  from default values and values
              specified within the configuration file /etc/multipath.conf.

       list|show config local
              Show the currently used configuration like show config, but  limiting  the  devices
              section to those devices that are actually present in the system.

       list|show blacklist
              Show  the  currently  used  blacklist rules, derived from default values and values
              specified within the configuration file /etc/multipath.conf.

       list|show devices
              Show all available block devices by name including  the  information  if  they  are
              blacklisted or not.

       list|show status
              Show  the  number  of path checkers in each possible state, the number of monitored
              paths, and whether multipathd is currently handling a uevent.

       list|show daemon
              Show the current state of the multipathd daemon.

       add path $path
              Add a path to the list of monitored paths. $path is as listed in  /sys/block  (e.g.
              sda).

       remove|del path $path
              Stop monitoring a path. $path is as listed in /sys/block (e.g. sda).

       add map|multipath $map
              Add  a  multipath  device  to  the  list of monitored devices. $map can either be a
              device-mapper device as listed in /sys/block (e.g. dm-0) or it can be the alias for
              the  multipath  device  (e.g.  mpath1)  or  the  uid  of the multipath device (e.g.
              36005076303ffc56200000000000010aa).

       remove|del map|multipath $map
              Stop monitoring a multipath device.

       resize map|multipath $map
              Resizes map $map to the given size.

       switch|switchgroup map|multipath $map group $group
              Force a multipath device to switch to a specific path group.  $group  is  the  path
              group index, starting with 1.

       reconfigure
              Rereads  the  configuration,  and  reloads all changed multipath devices. This also
              happens at startup, when the service is reload, or when a SIGHUP is received.

       reconfigure all
              Rereads the configuration, and reloads all multipath devices regardless of  whether
              or not they have changed. This also happens when multipath -r is run.

       suspend map|multipath $map
              Sets map $map into suspend state.

       resume map|multipath $map
              Resumes map $map from suspend state.

       reset map|multipath $map
              Reassign  existing  device-mapper table(s) use the multipath device, instead of its
              path devices.

       reload map|multipath $map
              Reload a multipath device.

       fail path $path
              Sets path $path into failed state.

       reinstate path $path
              Resumes path $path from failed state.

       disablequeueing maps|multipaths
              Disable queueing on all multipath devices.

       restorequeueing maps|multipaths
              Restore queueing on all multipath devices.

       disablequeueing map|multipath $map
              Disable queuing on multipathed map $map.

       restorequeueing map|multipath $map
              Restore queuing on multipahted map $map.

       forcequeueing daemon
              Forces multipathd into queue_without_daemon mode, so  that  no_path_retry  queueing
              will not be disabled when the daemon stops.

       restorequeueing daemon
              Restores configured queue_without_daemon mode.

       map|multipath $map setprstatus
              Enable persistent reservation management on $map.

       map|multipath $map unsetprstatus
              Disable persistent reservation management on $map.

       map|multipath $map getprstatus
              Get the current persistent reservation management status of $map.

       map|multipath $map getprkey
              Get the current persistent reservation key associated with $map.

       map|multipath $map setprkey key $key
              Set the persistent reservation key associated with $map to $key in the prkeys_file.
              This key will only be used by multipathd if  reservation_key  is  set  to  file  in
              /etc/multipath.conf.

       map|multipath $map unsetprkey
              Remove  the  persistent  reservation key associated with $map from the prkeys_file.
              This will only unset the key used by multipathd if reservation_key is set  to  file
              in /etc/multipath.conf.

       path $path setmarginal
              move $path to a marginal pathgroup. The path will remain in the marginal path group
              until unsetmarginal is called. This command will only work  if  marginal_pathgroups
              is  enabled  and  there  is  no  Shaky  paths  detection method configured (see the
              multipath.conf man page for details).

       path $path unsetmarginal
              return marginal path $path to its normal pathgroup. This command will only work  if
              marginal_pathgroups  is  enabled  and  there  is  no  Shaky  paths detection method
              configured (see the multipath.conf man page for details).

       map $map unsetmarginal
              return all marginal paths in $map to their normal  pathgroups.  This  command  will
              only  work  if marginal_pathgroups is enabled and there is no Shaky paths detection
              method configured (see the multipath.conf man page for details).

       quit|exit
              End interactive session.

       shutdown
              Stop multipathd.

SYSTEMD INTEGRATION

       When  compiled  with  systemd  support  two   systemd   service   files   are   installed,
       multipathd.service  and  multipathd.socket The multipathd.socket service instructs systemd
       to intercept the CLI command socket, so that any call to the CLI interface  will  start-up
       the  daemon  if  required.   The  multipathd.service  file  carries  the  definitions  for
       controlling the multipath daemon. The daemon itself uses  the  sd_notify(3)  interface  to
       communicate with systemd. The following unit keywords are recognized:

       WatchdogSec=
              Enables  the internal watchdog from systemd. multipath will send a notification via
              sd_notify(3) to systemd to reset the watchdog. If  specified  the  polling_interval
              and  max_polling_interval  settings  will  be  overridden by the watchdog settings.
              Please note that systemd prior to version 207 has issues which prevent the systemd-
              provided  watchdog  from  working  correctly.  So  the  watchdog is not enabled per
              default, but has to be enabled manually by updating the multipathd.service file.

       OOMScoreAdjust=
              Overrides the internal OOM adjust mechanism.

       LimitNOFILE=
              Overrides the max_fds configuration setting.

SEE ALSO

       multipath(8), kpartx(8), sd_notify(3), system.service(5).

AUTHORS

       multipath-tools was developed by Christophe Varoqui  <christophe.varoqui@opensvc.com>  and
       others.