Provided by: pptpd_1.4.0-12build2_amd64 bug

NAME

       pptpd - PPTP VPN daemon

SYNOPSIS

       pptpd [ options ]

DESCRIPTION

       pptpd  is  the Poptop PPTP daemon, which manages tunnelled PPP connections encapsulated in
       GRE using the PPTP VPN protocol.  It may contain features like IP address  management  and
       TCP wrappers if compiled in.

OPTIONS

       Here   we  document  the  command  line  options.   See  pptpd.conf(5)  for  configuration
       directives, IP address allocation, routing, and firewall rules.

       -b|--bcrelay internal-interface
              specifies that broadcasts received  on  the  server's  internal  network  interface
              should be relayed to the clients.

       -c|--conf conf-file
              specifies the configuration file for pptpd (default /etc/pptpd.conf)

       -d|--debug
              turns on debugging mode, causing more debugging messages to be sent to syslog.

       -e|--ppp pppd-program
              use pppd-program in place of the default pppd(8).

       -f|--fg
              run in the foreground instead of detaching from terminal

       -h|--help
              display program usage.

       -i|--noipparam
              do not send the client's IP address to ip-up scripts (required if you are using the
              pppd(8) ipparam option for some other purpose).

       -l|--listen x.x.x.x
              specifies the local interface IP address to listen on.

       -o|--option ppp-conf-file
              specifies that pptpd should specify an alternate configuration  file  for  the  ppp
              daemon (the default is normally /etc/ppp/options but may vary depending on your ppp
              daemon).

       -p|--pidfile pid-file
              specifies  an  alternate  location  to  store  the   process   ID   file   (default
              /var/run/pptpd.pid).

       -s|--speed baud
              specifies  that  the speed baud should be passed to the ppp daemon as the tty speed
              to use (in some cases this is ignored by the ppp daemon).

       -t|--stimeout seconds
              specifies the number of seconds to wait for the first packet  before  dropping  the
              connection. This is a denial of service protection feature.

       -w|--logwtmp
              update wtmp(5) as users connect and disconnect.  See wtmp(1).

       -C|--connections n
              limits  the  number of client connections that may be accepted.  Corresponds to the
              connections option in pptpd.conf.   If  pptpd  is  allocating  IP  addresses  (e.g.
              --delegate  is  not  used)  then  the  number of connections is also limited by the
              remoteip option in pptpd.conf.

       -D|--delegate
              delegates the allocation of client IP addresses to pppd(8).  Without  this  option,
              which is the default, pptpd manages the list of IP addresses for clients and passes
              the next free address to pppd.  With this option, pptpd does not pass  an  address,
              and so pppd may use radius or chap-secrets to allocate an address.

       -V|--vrf vrf-name
              specifies the VRF to be used for listening in.

       -v|--version
              displays the current version of the pptp daemon.

FILES

       /etc/pptpd.conf
       /var/run/pptpd.pid

DEBUGGING

       To  turn  on  debugging,  add  'debug'  to  /etc/pptpd.conf and your PPP options file, and
       restart pptpd.

       Typically the PPP options file is options.pptpd in /etc/ppp, though on some  distributions
       it  may be pptpd-options.  Use your package manager to find it, e.g. 'rpm -ql pptpd | grep
       options' or 'dpkg --listfiles pptpd | grep options'.

       You may need to configure syslogd to catch debug messages.  e.g. edit /etc/syslog.conf and
       add something similar to the example below, then restart syslogd.

       # debug logging
       *.debug;mail.none                                       /var/log/debug

       This  will  log all debug information, except mail, to the file /var/log/debug.  Note that
       this is a lot of information and might flood your disks.  If performance is an issue,  you
       can try turning off sync during your debugging, by prefixing the destination with '-'.

       # debug logging
       *.debug;mail.none                                       -/var/log/debug

       Disable  this  line  and  restart syslog after you are done debugging.  See the syslog man
       pages for more details.

AUTHORS

       Poptop   is   written   by   Matthew   Ramsay   <matthewr@moreton.com.au>,   David   Luyer
       <luyer@ucs.uwa.edu.au>,     Kevin     Thayer     <tmk@netmagic.net>,     Peter     Galbavy
       <Peter.Galbavy@knowledge.com> and others. Development has been moved  to  SourceForge  and
       worked on by Richard de Vroede <r.devroede@linvision.com> since June 26, 2002.

COPYRIGHT

       Copyright © 1999 Matthew Ramsay and others.

       Poptop  is  free software; you can redistribute it and/or modify it under the terms of the
       GNU General Public License as published by the Free Software Foundation; either version 2,
       or (at your option) any later version.

       Poptop  is  distributed  in  the  hope  that  it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE.
       See the GNU General Public License for more details.

       You  should  have received a copy of the GNU General Public License along with Poptop; see
       the file COPYING.  If not, write to the Free Software Foundation, 59 Temple Place -  Suite
       330, Boston, MA 02111-1307, USA.

AVAILABILITY

       The  most  recent  version  of  Poptop  is  available  for  download  from  SourceForge at
       http://sourceforge.net/projects/poptop.

SEE ALSO

       pppd(8), pptpd(8), pptpd.conf(5).

                                         29 December 2005                                PPTPD(8)