Provided by: rbldnsd_0.999~20180516-3_amd64 bug

NAME

       rbldnsd - DNS daemon suitable for running DNS-based blocklists

SYNOPSIS

       rbldnsd options zone:dataset...

DESCRIPTION

       rbldnsd  is  a  small DNS-protocol daemon which is designed to handle queries to DNS-based
       IP-listing or NAME-listing services.  Such services are a simple way  to  share/publish  a
       list of IP addresses or (domain) names which are "listed" for for some reason, for example
       in order to be able to refuse a service to a client which is "listed" in some blocklist.

       rbldnsd is not a general-purpose nameserver.  It will answer to A and TXT (and SOA and  NS
       if  such RRs are specified) queries, and has limited ability to answer to some other types
       of queries.

       rbldnsd tries to handle data from two different perspectives: given a set (or several)  of
       "listed  entries"  (e.g.  IP  address  ranges or domain names), it builds and serves a DNS
       zone.  Note the two are not the same: list of spammer's IPs is NOT a DNS zone, but may  be
       represented and used as such, provided that some additional information necessary to build
       complete DNS zone (e.g. NS and SOA records, maybe A records necessary for http to work) is
       available.   In  this  context,  rbldnsd  is  very  different  from  other general-purpose
       nameservers such as BIND or NSD: rbldnsd operates with datasets  (sets  of  entries  -  IP
       addresses  or  domain  names,  logically  grouped  together),  while other general-purpose
       nameservers operates with zones.  The way how rbldnsd operates may be  somewhat  confusing
       to BIND experts.

       For  rbldnsd,  a  building  block  is a dataset: e.g., set of insecure/abuseable hosts (IP
       addresses), set of network ranges that belongs to various  spam  operations  (IP  ranges),
       domain  names  that  belong  to  spammers  (RHSBL)  and so on.  Usually, different kind of
       information is placed into separate file, for easy maintenance.  From  a  number  of  such
       datasets, rbldnsd constructs a number of DNS zones as specified on command line.  A single
       dataset may be used for several zones, and a single zone may be constructed  from  several
       datasets.

       rbldnsd  will  answer  queries to DNS zones specified on the command line as a set of zone
       specifications.  Each zone specification consists of zone basename,  dataset  type  and  a
       comma-separated list of files that forms a given dataset: zone:type:file,file,...

       Several zones may be specified in command line, so that rbldnsd will answer queries to any
       of them.  Also, a single zone may be specified several times with different  datasets,  so
       it  is  possible to form a zone from a combination of several different dataset.  The same
       dataset may be reused for several zones too (and in this case, it will be read into memory
       only once).

       There  are  several dataset formats available, each is suitable and optimized (in terms of
       memory, speed and ease of use) for a  specific  task.   Available  dataset  types  may  be
       grouped into the following categories:

              lists  of  IP  addresses.   When a query is done to a zone with such data, query is
              interpreted as an IP address in a reverse form (similar to in-addr.arpa zone).   If
              the  address  is  found  in  dataset  data,  rbldnsd  will return A and TXT records
              specified in data for that IP.  This is a classical IP-based blocklist.

              lists of domain names.  Similar to list of IP addresses, but  with  generic  domain
              names  instead of IPs (wildcards allowed).  This type of data may be used to form a
              blocklist of e.g.  sender domain names.

              generic list of various types of records, as an auxilary data to  form  a  complete
              nameserver.   This  format is similar to bind-style datafiles, but very simplified.
              One may specify A, TXT, NS and MX records here.

              combined set, different datasets from the list above combined in  the  single  (set
              of) source files, for easy maintenance.

              acl,  or Access Control List.  This is a pseudo dataset, that works by overweriting
              query results based on the requestor (peer) IP address.

OPTIONS

       The following options may be specified:

       -u user[:group]
              rbldnsd will change its userid to the specified user, which defaults to rbldns, and
              group,  which by default is the primary group of a user. rbldnsd will refuse to run
              as the root user, since this is insecure.

       -r rootdir
              rbldnsd will chroot to rootdir if specified.  Data files should be available inside
              rootdir.

       -w workdir
              rbldnsd will change its working directory to workdir (after chrooting to rootdir if
              -r option is also specified).  May be used to shorten filename paths.

       -b address/port
              This option is required.  rbldnsd will bind to specified  address  and  port  (port
              defaults  to  port  53,  domain).   Either  numeric IP address or a hostname may be
              specified, and either port number or service name is accepted.  It is  possible  to
              specify  several  addresses  to  listen  on  this  way,  by  repeating  -b  option.
              Additionally, if there are several addresses listed for a  hostname,  rbldnsd  will
              listen  on  all  of  them.  Note that rbldnsd will work slightly faster if only one
              listening address is specified.  Note the delimiter between  host  and  port  is  a
              slash (/), not a colon, to be able to correctly handle IPv6 addresses.

       -4     Use IPv4 listening socket/transport, do not attempt to use IPv6 (ignored if rbldnsd
              was built without IPv6 support).

       -6     Use IPv6 listening socket/transport, do not attempt to use IPv4 (this  option  will
              be reported as error if IPv6 support was not compiled in).

       -t defttl:minttl:maxttl
              Set  default  reply  time-to-live (TTL) value to be defttl, and set constraints for
              TTL to minttl and maxttl.  Default applies when there's no TTL defined in  a  given
              scope (in data file), and constraints are applied when such value provided in data.
              Any of the values may be omitted, including trailing  colon  (:)  characters,  e.g.
              "-t 30"  set default TTL to be 30 secound, and "-t ::120" or "-t ::2m" sets maximum
              allowed TTL to 2 minutes.  All 3 values are in time units, with optional suffix:  s
              (secounds, default), m (minutes), h (hours), d (days) or w (weeks).  Zero minttl or
              maxttl means no corresponding constraint will be enforced.  Default defttl is 35m.

       -c check
              Set interval between checking for zone file changes to be check, default is 1m (one
              minute).  rbldnsd will check zone file's last modification time every so often, and
              if it detects a change, zone will be automatically reloaded.  Setting this value to
              0  disables  automatic zone change detection.  This procedure may also be triggered
              by sending a SIGHUP signal to rbldnsd (see SIGNALS section below).

       -e     Allow non-network addresses to be used in CIDR ranges.  Normally,  rbldnsd  rejects
              addresses such as 127.2.3.4/24, where prefix is not within the network mask derived
              from bit number (in this case, correct form is 127.2.3.0/24, note the trailing zero
              in  prefix).   This is done in order to catch possible typos in zones (rbldnsd will
              warn about a problem and will ignore such entry).  This  option  disables  checking
              whether the CIDR prefix fits within the network mask.

       -q     Quick  and quiet start.  Normally, rbldnsd does socket initialization and zone load
              in foreground, writing progress and statistic to standard  output,  and  aborts  in
              case  of  any  errors.  With this flag, nothing will be printed and first zone load
              will be done in background (unless -n option is also given), and zone  load  errors
              will be non-fatal.

       -p pidfile
              Write  rbldnsd's pid to the specified pidfile, so it will be easily findable.  This
              file gets written before entering a chroot jail (if specified) and before  changing
              userid, so it's ok to specify e.g. /var/run/rbldnsd.pid here.

       -l logfile
              Specifies  a  file  to  which  log  all  requests made.  This file is created after
              entering a chroot jail and becoming a user.  Logfiles may be quite large,  esp.  on
              busy sites (rbldnsd will log every recognized request if this option is specified).
              This option is mainly intended for debugging purposes.  Upon receiption  of  SIGHUP
              signal,  rbldnsd  reopens  its  logfile.  If logfile prefixed with a plus sign (+),
              logging will not be buffered (i.e. each line will be flushed to disk); by  default,
              logging  is  buffered  to  reduce  system  load.   Specify a single hyphen (-) as a
              filename to log to standard output (filedescriptor 1), either buffered by  default,
              or  line-buffered if specified as `+-' (standard output will not be "reopened" upon
              receiving SIGHUP signal, but will be flushed in case logging is buffered).

       -s statsfile
              Specifies a file where rbldnsd will write a line with short  statistic  summary  of
              queries made per zone, every check (-c) interval.  Format of each line is:
                timestamp zone:qtot:qok:qnxd:bin:bout zone:...
              where  timestamp  is unix time (secounds since epoch), zone is the name of the base
              zone, qtot is the total number of  queries  received,  qok  -  number  of  positive
              replies,  qnxd  - number of NXDOMAIN replies, bin is the total number of bytes read
              from network (excluding IP/UDP overhead and dropped packets),  bout  is  the  total
              number  of  bytes  written  to  network.  Ther are as many such tuples as there are
              zones, and one extra, total typle at the end, with zone being "*", like:
                1234 bl1.ex:10:5:4:311:432 bl2.ex:24:13:7:248:375 *:98:35:12:820:987
              Note the total values may be larger than the sum of per-zone values, due to queries
              made against unlisted zones, or bad/broken packets.

              Rbldnsd  will  write  bare  timestamp to statsfile when it is starting up, shutting
              down or when statistic counters are being reset after receiving SIGUSR2 signal (see
              below), to indicate the points where the counters are starting back from zero.

              By  default,  rbldnsd  writes  absolute  counter  values  into statsfile (number of
              packets (bytes) since startup or last reset).  statsfile may be prefixed with  plus
              sign (+), in which case rbldnsd will write delta values, that is, number of packets
              or bytes since  last  write,  or  number  of  packets  (bytes)  per  unit  of  time
              ("incremental" mode, hence the "+" sign).

       -n     Do not become a daemon.  Normally, rbldnsd will fork and go to the background after
              successful initialization.  This option disables this behaviour.

       -f     Request rbldnsd to continue processing requests during data reloads.  Rbldnsd forks
              a  child  process  to  handle requests while parent reloads the data.  This ensures
              smooth operations, but requires more memory, since two copies of data is  keept  in
              memory during reload process.

       -d     Dump  all zones to stdout in BIND format and exit.  This may be suitable to convert
              easily editable rbldnsd-style data into BIND zone.  rbldnsd dumps all zones as  one
              stream,  so  one  may  want  to specify only one zone with -d.  Zone file will have
              appropriate $ORIGIN tags.  Note that data generated may be  really  huge  (as  BIND
              format  isn't  appropriate  for  this  sort of things), and some entries may not be
              really the same in BIND as in rbldnsd (e.g., IP netblocks of  large  size  will  be
              represented  as  wildcard  entries  - 10.0.0.0/8 will become *.10; excluded entries
              will be represented by a CNAME to `excluded' name,  so  such  name  should  not  be
              present in a data set).  In this mode, rbldnsd ignores -r (root directory) option.

       -v     Do  not  show  exact version information in response to version.bind CH TXT queries
              (by default rbldnsd responds to such queries since version 0.98).  With single  -v,
              rbldnsd  will  only  return  "rbldnsd"  to  the caller, without the version number.
              Second -v disables providing any information in response  to  such  requests,  i.e.
              rbldnsd will return REFUSE code.

       -C     Disable  automatic  on-the-fly  uncompression  of  data  files  if  this feature is
              compiled in (see below).

       -A

       -a     Controls "laziness" of rbldnsd  when  constructing  replies.   With  -a  specified,
              rbldnsd  does  not  add  AUTH  section  (containing  NS  records) to replies unless
              explicitly asked for NS records.   It  is  equivalent  to  BIND9  "minimal-answers"
              configuration  setting.   While with -A specified, rbldnsd will always fill in AUTH
              section, increasing size of replies dramatically but  allowing  (caching)  resolver
              clients  to  react  faster  to changes in nameserver lists.  Currently (as of 0.998
              version), non-lazy (as with -A) mode is the default, but it will change  in  future
              release.

       -x extension
              Load  the  given  extension  file (a dynamically-linked library, usually with ".so"
              suffix).  This allows to gather custom statistics or perform  other  custom  tasks.
              See  separate  document  for  details  about  building  and using extensions.  This
              feature is not available on all platforms, and can be disabled at compile time.

       -X extarg
              Pass the given argument, extarg, to the extension loaded with -x.

DATASET TYPES AND FORMATS

       Dataset files are text files which are interpreted depending on type specified in  command
       line.   Empty  lines  and  lines  starting  with  hash  character (#) or semicolon (;) are
       ignored, except for a special case outlined below in section titled "Special Entries".

       A (comma-separated) list of files in  dataset  specification  (in  type:file,file,...)  is
       interpreted as if all files where logically combined into one single file.

       When  compiled with zlib support, rbldnsd is able to read gzip-compressed data files.  So,
       every file in dataset specification can be compressed with gzip(1), and rbldnsd will  read
       such  a file decompressing it on-the-fly.  This feature may be turned off by specifying -C
       option.

       rbldnsd is designed to service a DNSBL, where each entry have single A record and optional
       TXT  record assotiated with it.  rbldnsd allows to specify A value and TXT template either
       for each entry individually, or to use default A value and TXT template pair for  a  group
       of entries.  See section "Resulting A values and TXT templates" below for a way to specify
       them.

   Special Entries
       If a line starts with a dollar sign ($), hash character and a dollar sign (#$),  semicolon
       and  dollar sign (;#) or colon and a dollar sign (:$), it is interpreted in a special way,
       regardless of dataset type (this  is  one  exception  where  a  line  starting  with  hash
       character  is  not  ignored  - to be able to use zone files for both rbldnsd and for DJB's
       rbldns). The following keywords, following a dollar sign, are recognized:

       $SOA ttl origindn persondn serial refresh retry expire minttl
              Specifies SOA (Start Of Authority) record for all zones using this  dataset.   Only
              first SOA record is interpreted.  This is the only way to specify SOA - by default,
              rbldnsd will not add any SOA record into answers, and  will  REFUSE  to  answer  to
              certain   queries  (notably,  SOA  query  to  zone's  base  domain  name).   It  is
              recommended, but not mandatory to specify SOA record for every zone.  If no SOA  is
              given,  negative  replies  will not be cacheable by caching nameservers.  Only one,
              first $SOA  line  is  recognized  in  every  dataset  (all  subsequent  $SOA  lines
              encountered  in  the same dataset are silently ignored).  When constructing a zone,
              SOA will be taken from first dataset where $SOA line  is  found,  in  an  order  as
              specified  in  command line, subsequent $SOA lines, if any, are ignored.  This way,
              one may overwrite $SOA found in 3rd party data by prepending small  local  file  to
              the dataset in question, listing it before any other files.

              If  serial  value specified is zero, timestamp of most recent modified file will be
              substituted as serial.

              If ttl field is zero, default ttl (-t option or last $TTL value, see below) will be
              used.

              All  time  fields  (ttl,  refresh,  retry, expire, minttl) may be specified in time
              units.  See -t option for details.

       $NS ttl nameserverdn nameserverdn...
              Specifies NS (Name Server) records for all zones using this  dataset.   Only  first
              $NS  line  in  a  dataset is recognized, all subsequent lines are silently ignored.
              When constructing a zone from several datasets, rbldnsd uses nameservers  from  $NS
              line  in  only  first  dataset where $NS line is given, in command-line order, just
              like for $SOA  record.   Only  first  32  namservers  are  recognized.   Individual
              nameserver(s)  may  be  prefixed  with  a  minus  sign (-), which means this single
              nameserver will be ignored by rbldnsd.  This is useful to temporary comment out one
              nameserver  entry  without  removing it from the list.  If ttl is zero, default ttl
              will be used.  The list of NS records, just like $SOA value,  are  taken  from  the
              first  data file in a dataset where the $NS line is found, subsequent $NS lines, if
              any, are ignored.

       $TTL time-to-live
              Specifies TTL (time-to-live) value for all records in current dataset.  See also -t
              option.  $TTL special overrides -t value on a per-dataset basis.

       $TIMESTAMP dstamp [expires]
              (experimental)  Specifies  the  data  timestamp  dstamp  when  the  data  has  been
              generated, and optionally  when  it  will  expire.   The  timestamps  are  in  form
              yyyy:mm:dd[:hh[:mi[:ss]]], where yyyy is the year like 2005, mm is the month number
              (01..12), dd is the month day number (01..31), hh is hour (00..23), mi and  ss  are
              minutes and secounds (00.59); hours, minutes and secounds are optional and defaults
              to 0; the delimiters (either colon or dash may be used) are optional too,  but  are
              allowed  for  readability.  Also, single zero (0) or dash (-) may be used as dstamp
              and/or expires, indicating the value is not given.  expires may also  be  specified
              as  +rel,  where rel is a time specification (probably with suffix like s, m, h, d)
              as an offset to dstamp.  rbldnsd compares dstamp with current timestamp and refuses
              to  load  the  file  if  dstamp  specifies  time  in the future.  And if expires is
              specified, rbldnsd will refuse to service requests for that data if current time is
              greather than the value specified in expires field.

              Note  that  rbldnsd  will  check the data expiry time every time it checks for data
              file updates (when receiving SIGHUP signal or every  -c  interval).   If  automatic
              data   reload   timer   (-c  option)  is  disabled,  zones  will  not  be  exipired
              automatically.

       $MAXRANGE4 range-size
              Specifies maximum size of IPv4 range allowed for IPv4-based datasets.  If an  entry
              covers more IP addresses than range-size, it will be ignored (and a warning will be
              logged).  range-size may be specified as a number of hosts, like 256, or as network
              prefix lenght, like /24 (the two are the same):
                $MAXRANGE4 /24
                $MAXRANGE4 256
              This  constraint is active for a dataset it is specified in, and can be owerwritten
              (by subsequent $MAXRANGE statement) by a smaller value, but can not be increased.

       $n text
              (n  is  a  single  digit).   Specifies  a  substitution  variable  for  use  as  $n
              placeholders  (the  $n  entries  are  ignored  in  generic  daaset).   See  section
              "Resulting A values and TXT templates" below for description and usage examples.

       $= text
              Set the base template for all individual TXT records.   See  section  "Resulting  A
              values and TXT templates" below for more information.

   ip4set Dataset
       A  set  of  IP addresses or CIDR address ranges, together with A and TXT resulting values.
       IP addresses are specified one per  line,  by  an  IP  address  prefix  (initial  octets),
       complete IP address, CIDR range, or IP prefix range (two IP prefixes or complete addresses
       delimited by a dash, inclusive).  Examples, to specify 127.0.0.0/24:
         127.0.0.0/24
         127.0.0
         127/24
         127-127.0.0
         127.0.0.0-127.0.0.255
         127.0.0.1-255
       to specify 127.16.0.0-127.31.255.255:
         127.16.0.0-127.31.255.255
         127.16.0-127.31.255
         127.16-127.31
         127.16-31
         127.16.0.0/12
         127.16.0/12
         127.16/12
       Note that in prefix range, last boundary is completed with all-ones (255),  not  all-zeros
       line  with  first boundary and a prefix alone.  In prefix ranges, if last boundary is only
       one octet (127.16-31), it is treated as "suffix", as value of last specified octet of  the
       first   boundary   prefix   (127.16.0-31  is  treated  as  127.16.0.0-127.16.31.255,  i.e.
       127.16.0.0/19).

       After an IP address range, A and TXT values for a given entry may be specified.   If  none
       given,  default  values  in  current  scope (see below) applies.  If a value starts with a
       colon, it is interpreted as a pair of A  record  and  TXT  template,  delimited  by  colon
       (:127.0.0.2:This  entry  is  listed).   If  a  value  does  not  start with a colon, it is
       interpreted as TXT template only, with A record defaulting  to  the  default  A  value  in
       current scope.

       IP address range may be followed by a comment char (either hash character (#) or semicolon
       (;)), e.g.:
         127/8 ; loopback network
       In this case all characters up to the end of line are  ignored,  and  default  A  and  TXT
       values will be used for this IP range.

       Every  IP  address  that fits within any of specified ranges is "listed", and rbldnsd will
       respond to reverse queries against it within specified zone  with  positive  results.   In
       contrast,  if  an  entry  starts with an exclamation sign (!), this is an exclusion entry,
       i.e. corresponding address range is excluded from being listed (and  any  value  for  this
       record  is  ignored).   This  may  be  used  to specify large range except some individual
       addresses, in a compact form.

       If a line starts with a colon (:), this  line  specifies  the  default  A  value  and  TXT
       template  to  return (see below) for all subsequent entries up to end of current file.  If
       no default entry specified, and no value specified for a given record, rbldnsd will return
       127.0.0.2  for  matching  A queries and no record for matching TXT queries.  If TXT record
       template is specified and contains occurences of of dollar sign ($), every such  occurence
       is  replaced  with  an  IP  address in question, so singe TXT template may be used to e.g.
       refer to a webpage for an additional information for a specific IP address.

   ip4trie Dataset
       Set of IP4 CIDR ranges with corresponding (A, TXT) values.  This  dataset  is  similar  to
       ip4set,  but  uses  a different internal representation.  It accepts CIDR ranges only (not
       a.b.c.d-e.f.g.h), and allows for the specification of A/TXT values on  a  per  CIDR  range
       basis.   (If  multiple CIDR ranges match a query, the value for longest matching prefix is
       returned.)  Exclusions are supported too.

       This dataset is not particularly memory-efficient for storing many single IP  addresses  —
       it  uses  about 50% more memory than the ip4set dataset in that case.  The ip4trie dataset
       is better adapted, however, for listing CIDR ranges (whose lengths are not a multiple of 8
       bits.)

   ip4tset Dataset
       "trivial"  ip4set:  a  set  of  single  IP  addresses  (one per line), with the same A+TXT
       template.  This dataset type is more efficient than  ip4set  (in  both  memory  usage  and
       access  times),  but  have  obvious  limitation.  It is intended for DNSBLs like DSBL.org,
       ORDB.org and similar, where each entry uses the same default A+TXT template.  This dataset
       uses only half a memory for the same list of IP addresses compared to ip4set.

   ip6trie Dataset
       Set of IP6 CIDR ranges.  This is the IP6 equivalent of the ip4trie dataset.  It allows the
       sepecification of individual A/TXT values for each CIDR  range  and  supports  exclusions.
       Compressed ("::") ip6 notation is supported.

       Example zone data:
         # Default A and TXT template valuse
         :127.0.1.2: Listed, see http://example.com/lookup?$

         # A listing, note that trailing :0s can be omitted
         2001:21ab:c000/36

         # /64 range with non-default A and TXT values
         2001:21ab:def7:4242 :127.0.1.3: This one smells funny

         # compressed notation
         2605:6001:42::/52
         ::1                   # localhost
         !2605:6001:42::bead   # exclusion

   ip6tset Dataset
       "Trivial"  ip6  dataset: a set of /64 IP6 CIDR ranges (one per line), all sharing a single
       A+TXT template.  Exclusions of single IP6  (/128)  addresses  are  also  supported.   This
       dataset  type is quite memory-efficient — it uses about 40% of the memory that the ip6trie
       dataset would use — but has obvious limitations.

       This dataset wants the /64s listed as four ip6 words, for example:
         2001:20fe:23:41ed
         abac:adab:ad00:42f
       Exclusions are denoted with a leading exclamation mark.  You may also use compressed  "::"
       notation for excluded addresses.  E.g.:
         !abac:adab:ad00:42f:face:0f:a:beef
         !abac:adab:ad00:42f::2

   dnset Dataset
       Set  of  (possible  wildcarded) domain names with associated A and TXT values.  Similar to
       ip4set, but instead of IP addresses, data consists of domain names (not in reverse  form).
       One  domain  name  per line, possible starting with wildcard (either with star-dot (*.) or
       just a dot).  Entry starting with exclamation sign is exclusion.  Default  value  for  all
       subsequent lines may be specified by a line starting with a colon.

       Wildcards are interpreted as follows:

       example.com
              only example.com domain is listed, not subdomains thereof.  Not a wildcard entry.

       *.example.com
              all subdomains of example.com are listed, but not example.com itself.

       .example.com
              all  subdomains  of  example.com  and  example.com  itself  are  listed.  This is a
              shortcut: to list a domain name itself and all  it's  subdomains,  one  may  either
              specify two lines (example.com and *.example.com), or one line (.example.com).

       This dataset type may be used instead of ip4set, provided all CIDR ranges are expanded and
       reversed (but in this case, TXT template will be expanded differently).

   generic Dataset
       Generic type, simplified bind-style format.  Every record should  be  on  one  line  (line
       continuations  are  not  supported),  and  should be specified completely (i.e. all domain
       names in values should be fully-qualified, entry name may not be omitted).   No  wildcards
       are  accepted.   Only  A,  TXT, and MX records are recognized.  TTL value may be specified
       before record type.  Examples:

               # bl.ex.com
               # specify some values for current zone
               $NS 0 ns1.ex.com ns2.ex.com
               # record with TTL
               www 3000 A 127.0.0.1
               about TXT "ex.com combined blocklist"

   combined Dataset
       This is a special dataset that stores no data by itself but  acts  like  a  container  for
       several other datasets of any type except of combined type itself.  The data file contains
       an optional common section, where various specials are recognized  like  $NS,  $SOA,  $TTL
       (see  above),  and  a  series  of sections, each of which defines one (nested) dataset and
       several subzones of the base zone, for  which  this  dataset  should  be  consulted.   New
       (nested) dataset starts with a line
         $DATASET type[:name] subzone subzone...
       and  all  subsequent  lines  up  to  the  end of current file or to next $DATASET line are
       interpreted as a part of dataset of type type,  with  optional  name  (name  is  used  for
       logging  purposes  only, and the whole ":name" (without quotes or square brackets) part is
       optional).  Note that combined datasets cannot be nested.  Every subzone  will  always  be
       relative  to the base zone name specified on command line.  If subzone specified as single
       character "@", dataset will be connected to the base zone itself.

       This dataset type aims to simplify subzone maintenance, in order to  be  able  to  include
       several  subzones  in one file for easy data transfer, atomic operations and to be able to
       modify list of subzones on remote secondary nameservers.

       Example of a complete dataset that contains subzone `proxies' with a list of open proxies,
       subzone  `relays'  with  a  list  of  open  relays,  subzone `multihop' with output IPs of
       multihop open relays, and the base  zone  itself  includes  proxies  and  relays  but  not
       multihops:
         # common section
         $NS 1w ns1.ex.com ns2.ex.com
         $SOA 1w ns1.ex.com admin.ex.com 0 2h 2h 1w 1h
         # list of open proxies,
         # in `proxies' subzone and in base zone
         $DATASET ip4set:proxy proxies @
         :2:Open proxy, see http://bl.ex.com/proxy/$
         127.0.0.2
         127.0.0.10
         # list of open relays,
         # in `relays' subzone and in base zone
         $DATASET ip4set:relay relays @
         :3:Open relay, see http://bl.ex.com/relay/$
         127.0.0.2
         127.0.2.10
         # list of optputs of multistage relays,
         # in `multihop' subzone only
         $DATASET ip4set:multihop-relay multihop
         :4:Multihop open relay, see http://bl.ex.com/relay/$
         127.0.0.2
         127.0.9.12
         # for the base zone and all subzones,
         # include several additional records
         $DATASET generic:common proxies relays multihop @
         @ A 127.0.0.8
         www A 127.0.0.8
         @ MX 10 mx.ex.com
         # the above results in having the following records
         # (provided that the base zone specified is bl.ex.com):
         #  proxies.bl.ex.com A 127.0.0.8
         #  www.proxies.bl.ex.com 127.0.0.8
         #  relays.bl.ex.com A 127.0.0.8
         #  www.relays.bl.ex.com 127.0.0.8
         #  multihop.bl.ex.com A 127.0.0.8
         #  www.multihop.bl.ex.com 127.0.0.8
         #  bl.ex.com A 127.0.0.8
         #  www.bl.ex.com 127.0.0.8

       Note  that  $NS and $SOA values applies to the base zone only, regardless of the placement
       in the file.  Unlike the $TTL values and $n substitutions, which may be  both  global  and
       local for a given (sub-)dataset.

   Resulting A values and TXT templates
       In  all  zone  file  types  except  generic,  A  values and TXT templates are specified as
       following:
         :127.0.0.2:Blacklisted: http://example.com/bl?$
       If a line starts with a colon, it specifies default A and TXT for all  subsequent  entries
       in  this  dataset.   Similar format is used to specify values for individual records, with
       the A value (enclosed by colons) being optional:
         127.0.0.2 :127.0.0.2:Blacklisted: http://example.com/bl?$
       or, without specific A value:
         127.0.0.2 Blacklisted: http://example.com/bl?$

       Two parts of a line, delimited by second colon, specifies A and TXT record  values.   Both
       are  optional.   By  default (either if no default line specified, or no IP address within
       that line), rbldnsd will return 127.0.0.2 as A record.  127.0.0 prefix for A value may  be
       omitted, so the above example may be simplified to:
         :2:Blacklisted: http://example.com/bl?$
       There  is no default TXT value, so rbldnsd will not return anything for TXT queries it TXT
       isn't specified.

       When A value is specified for a given entry, but TXT template is omitted, there may be two
       cases interpreted differently, namely, whenever there's a second semicolon (:) after the A
       value.  If there's no second semicolon, default TXT value for this scope will be used.  In
       contrast, when second semicolon is present, no TXT template will be generated at all.  All
       possible cases are outlined in the following example:

         # default A value and TXT template
         :127.0.0.2:IP address $ is listed
         # 127.0.0.4 will use default A and TXT
         127.0.0.4
         # 127.0.0.5 will use specific A and default TXT
         127.0.0.5 :5
         # 127.0.0.6 will use specific a and no TXT
         127.0.0.6 :6:
         # 127.0.0.7 will use default A and specific TXT
         127.0.0.7 IP address $ running an open relay

       In a TXT template, references to substitution variables are replaced with values  of  that
       variables.   In  particular,  single  dollar sign ($) is replaced by a listed entry (an IP
       address in question for IP-based datasets and the domain name for domain-based  datasets).
       $n-style constructs, where n is a single digit, are replaced by a substitution variable $n
       defined for this dataset in current scope  (see  section  "Special  Entries"  above).   To
       specify a dollar sign as-is, use $$.

       For example, the following lines:
         $1 See http://www.example.com/bl
         $2 for details
         127.0.0.2  $1/spammer/$ $2
         127.0.0.3  $1/relay/$ $2
         127.0.0.4  This spammer wants some $$$$.  $1/$
       will result in the following text to be generated:
         See http://www.example.com/bl/spammer/127.0.0.2 for details
         See http://www.example.com/bl/relay/127.0.0.3 for details
         This spammer wants some $$.  See http://www.example.com/bl/127.0.0.4

       If  the  "base  template"  ($=  variable) is defined, this template is used for expansion,
       instead of the one specified for an entry being queried.  Inside  the  base  template,  $=
       construct  is  substituted  with  the  text given for individual entries. In order to stop
       usage of base template $= for a single record, start it with = (which will be omitted from
       the resulting TXT value).  For example,
         $0 See http://www.example.com/bl?$= ($) for details
         127.0.0.2    r123
         127.0.0.3
         127.0.0.4    =See other blocklists for details about $
       produces the following TXT records:
         See http://www.example.com/bl?r123 (127.0.0.2) for details
         See http://www.example.com/bl?127.0.0.3 (127.0.0.3) for details
         See other blocklists for details about 127.0.0.4

   acl Dataset
       This is not a real dataset, while the syntax and usage is the same as with other datasets.
       Instead of defining which records exists in a given zone and which do not, the acl dataset
       specifies  which  client  hosts  (peers) are allowed to query the given zone.  The dataset
       specifies a set of IPv4 and/or IPv6 CIDR ranges (with  the  syntax  exactly  the  same  as
       understood  by the ip4trie and ip6trie datasets), together with action specifiers.  When a
       query is made from an IP address listed (not for the IP  address),  the  specified  action
       changes rules used to construct the reply.  Possible actions and their meanings are:

       :ignore
              ignore all queries from this IP address altogether.  rbldnsd acts like there was no
              query received at all.  This is the default action.

       :refuse
              refuse all queries from the IP in question.  rbldnsd will always return REFUSED DNS
              response code.

       :empty pretend  there's no data in all other datasets for the given zone.  This means that
              all the clients in question will always receive reply from rbldnsd telling that the
              requested  IP address or domain name is not listed in a given DNSBL.  rbldnsd still
              replies to metadata queries (SOA and NS records, and to all  queries  satisfied  by
              generic dataset if specified for the given zone) as usual.

       :pass  process the request as usual.  This may be used to add a "whitelisting" entry for a
              network/host bloked by another (larger) ACL entry.

       a_txt_template
              usual A+TXT template as used by other datasets.  This means that rbldnsd will reply
              to any valid DNSBL query with "it is listed" answer, so that the client in question
              will see every IP address or domain name is listed in a given  DNSBL.   TXT  record
              used  in  the reply is taken from the acl dataset instead of real datasets.  Again,
              just like with empty case, rbldnsd  will  continue  replying  to  metadata  queries
              (including generic datasets if any) as usual.

       Only  one  ACL dataset can be specified for a given zone, and each zone must have at least
       one non-acl dataset.  It is also possible to specify one global ACL dataset, by specifying
       empty zone name (which is not allowed for other dataset types), like
         rbldnsd ... :acl:filename...
       In  this  case the ACL defined in filename applies to all zones.  If there are both global
       ACL and local zone-specific ACL specified, both will be consulted and actions taken in the
       order  specified  above, ie, if either ACL returns ignore for this IP, the request will be
       ignored, else if either ACL returns refuse, the query will be refused, and so on.  If both
       ACLs  specifies  "always  listed" A+TXT template, the reply will contain A+TXT from global
       ACL.

       For this dataset type, only a few $-style specials are recognized.   In  particular,  $SOA
       and  $NS  keywords  are  not  allowed.   When  rbldnsd  performs $ substitution in the TXT
       template returned from ACL dataset, it will use client IP  address  to  substitute  for  a
       single $ character, instead of the IP address or domain name found in the original query.

SIGNALS

       Rbldnsd handles the following signals:

       SIGHUP recheck  zone  files  and  reload any outdated ones.  This is done automatically if
              enabled, see -c option.  Additionally, rbldnsd will reopen logfile  upon  receiving
              SIGHUP, if specified (-l option).

       SIGTERM, SIGINT
              Terminate process.

       SIGUSR1
              Log  current  statistic counters into syslog.  Rbldnsd collects how many packets it
              handled, how many bytes was received, sent, how many OK requests/replies  (and  how
              many answer records) was received/sent, how many NXDOMAIN answers was sent, and how
              many errors/refusals/etc was sent, in a period of time.

       SIGUSR2
              The same as SIGUSR1, but reset all counters and start new sample period.

NOTES

       Some unsorted usage notes follows.

   Generating and transferring data files
       When creating a data file for rbldnsd (and for anything else, it is a general advise),  it
       is  a  good idea to create the data in temporary file and rename the temp file when all is
       done.  Never try to write to the main file directly, it is possible that at the same time,
       rbldnsd  will try to read it and will get incomplete data as the result.  The same applies
       to copying data using cp(1) utility and similar (including scp(1)), that performs  copying
       over existing data.  Even if you're sure noone is reading the data while you're copying or
       generating it, imagine what will happen if you will not be able to  complete  the  process
       for  whatever reason (interrupt, filesystem full, endless number of other reasons...).  In
       most cases is better to keep older but correct data instead of leaving  incomplete/corrupt
       data in place.

       Right:
         scp remote:data target.tmp && mv target.tmp target
       Wrong:
         scp remote:data target
       Right:
         ./generate.pl > target.tmp && mv target.tmp target
       Wrong:
         ./generate.pl > target

       From this point of view, rsync(1) command seems to be safe, as it always creates temporary
       file and renames it to the destination only when all is ok (but note the --partial option,
       which is good for downloading something but may be wrong to transfer data files -- usually
       you don't want partial files to be loaded).  In contrast, scp(1) command is not  safe,  as
       it  performs  direct  copying.  You may still use scp(1) in a safe manner, as shown in the
       example above.

       Also try to eliminate a case when two (or more) processes performs data copying/generation
       at  the same time to the same destination.  When your data is generated by a cron job, use
       file locking (create separate lock file (which should never be removed) and flock/fcntl it
       in  exclusive  mode  without waiting, exiting if lock fails) before attempting to do other
       file manipulation.

   Absolute vs relative domain names
       All keys specified in dataset files are always relative to the zone base DN.  In contrast,
       all  the values (NS and SOA records, MX records in generic dataset) are absolute.  This is
       different from BIND behaviour, where trailing dot indicates whenever this is  an  absolute
       or relative DN.  Trailing dots in domain names are ignored by rbldnsd.

   Aggregating datasets
       Several zones may be served by rbldnsd, every zone may consist of several datasets.  There
       are numerous ways to combine several data files into several zones.  For example,  suppose
       you  have  a  list  of  dialup  ranges in file named `dialups', and a list of spammer's ip
       addresses  in  file  named  `spammers',  and  want  to  serve  3   zones   with   rbldnsd:
       dialups.bl.ex.com,  spam.bl.ex.com and bl.ex.com which is a combination of the two.  There
       are two ways to do this:

        rbldnsd options... \
          dialups.bl.ex.com:ip4set:dialups \
          spam.bl.ex.com:ip4set:spammers \
          bl.ex.com:ip4set:dialups,spammers

       or:

        rbldnsd options... \
          dialups.bl.ex.com:ip4set:dialups \
          spam.bl.ex.com:ip4set:spammers \
          bl.ex.com:ip4set:dialups \
          bl.ex.com:ip4set:spammers

       (note you should specify combined bl.ex.com zone after all its subzones in a command line,
       or else subzones will not be consulted at all).

       In  the first form, there will be 3 independent data sets, and every record will be stored
       2 times in memory, but only one search in internal  data  structures  will  be  needed  to
       resolve  queries for aggregate bl.ex.com.  In second form, there will be only 2 data sets,
       every record will be stored only once (both datasets will be reused), but 2 searches  will
       be  performed by rbldnsd to answer queries against aggregate zone (but difference in speed
       is almost unnoticeable).  Note that when aggregating several data files into one  dataset,
       an  exclusion entry in one file becomes exclusion entry in the whole dataset (which may be
       a problem when aggregating dialups, where exclusions are common, with open relays/proxies,
       where exclusions are rare if at all used).

       Similar  effect  may  be  achieved  by using combined dataset type, sometimes more easily.
       combined dataset results in every nested dataset to be used independantly, like in  second
       form above.

       combined  dataset  requires  rbldnsd to be the authoritative nameserver for the whole base
       zone.  Most important, one may specify SOA and NS records for the  base  zone  only.   So,
       some DNSBLs which does not use a common subzone for the data, cannot use this dataset.  An
       example  being  DSBL.org  DNSBL,  where  each  of  list.dsbl.org,  multihop.dsbl.org   and
       unconfirmed.dsbl.org   zones  are  separate,  independant  zones  with  different  set  of
       nameservers.  But for DSBL.org, where each dataset is really  independant  and  used  only
       once  (there's  no  (sub)zone  that is as a combinations of other zones), combined dataset
       isn't necessary.  In contrast, SORBS.net zones, where several subzones used and main  zone
       is a combination of several subzones, combined dataset is a way to go.

   All authoritative nameservers should be set up similarily
       When  you  have several nameservers for your zone, set them all in a similar way.  Namely,
       if one is set up using combined dataset, all the rest should be too, or else DNS meta-data
       will  be  broken.   This  is because metadata (SOA and NS) records returned by nameservers
       using combined and other datasets will have  different  origin.   With  combined  dataset,
       rbldnsd  return  NS  and SOA records for the base zone, not for any subzone defined inside
       the dataset.  Given the  above  example  with  dialups.bl.ex.com,  spammers.bl.ex.com  and
       aggregate  bl.ex.com  zones,  and  two  nameservers, first is set up in any ways described
       above (using individual datasets for every of the 3 zones), and second is set up  for  the
       whole  bl.ex.com  zone  using  combined  dataset.   In  this  case,  for  queries  against
       dialups.bl.ex.com, first nameserver will return NS records like
         dialups.bl.ex.com. IN NS a.ns.ex.com.
       while second will always use base zone, and NS records will look like
         bl.ex.com. IN NS a.ns.ex.com.
       All authoritative nameservers for a zone must have consistent metadata records.  The  only
       way  to achieve this is to use similar configuration (combined or not) on all nameservers.
       Have this in mind when using other software for a nameserver.

   Generic dataset usage
       generic dataset type is very rudimentary.  It's purpose is to  complement  all  the  other
       type to form complete nameserver that may answer to A, TXT and MX queries.  This is useful
       mostly to define A records for HTTP access (relays.bl.example.com A, www.bl.example.com  A
       just in case), and maybe descriptive texts as a TXT record.

       Since  rbldnsd  only  searches one, most closely matching (sub)zone for every request, one
       cannot specify a single e.g.  generic dataset in form
         proxies      TXT list of open proxies
         www.proxies  A 127.0.0.8
         relays       TXT list of open relays
         www.relays   A 127.0.0.9
       for several (sub)zones, each of which are represented as a zone  too  (either  in  command
       line  or  as  combined  dataset).   Instead, several generic datasets should be specified,
       separate one for every (sub)zone.  If the data for every subzone is the  same,  the  same,
       single  dataset  may be used, but it should be specified for every zone it should apply to
       (see combined dataset usage example above).

BUGS

       Most of the bugs outlined in this section aren't really bugs,  but  present  due  to  non-
       standartized and thus unknown expected behaviour of a nameserver that serves a DNSBL zone.
       rbldnsd matches BIND runtime behaviour where appropriate, but not always.

       rbldnsd lowercases some domain names (the ones that are lookup keys, e.g. in `generic' and
       `dnset'  datasets)  when  loading, to speed up lookup operations.  This isn't a problem in
       most cases.

       There is no TCP mode.  If a resource record does not fit in UDP  packet  (512  bytes),  it
       will  be silently ignored.  For most usages, this isn't a problem, because there should be
       only a few RRs in an answer, and because  one  record  is  usually  sufficient  to  decide
       whenever  a  given  entry  is  "listed" or not.  rbldnsd isn't a full-featured nameserver,
       after all.

       rbldnsd will not always return a list of nameserver records in the  AUTHORITY  section  of
       every  positive  answer: NS records will be provided (if given) only if there's a room for
       them in single UDP packet.  If records does not fit, AUTHORITY section will be empty.

       rbldnsd does not allow AXFR operations.  For DNSBLs, AXFR is  the  stupidiest  yet  common
       thing  to  do - use rsync for zone transfers instead.  This isn't a bug in rbldnsd itself,
       but in common practice of using AXFR and the like to transfer huge zones in a format which
       isn't suitable for such a task.  Perhaps in the future, if there will be some real demand,
       I'll implement AXFR "server" support (so that rbldnsd will be able to act  as  master  for
       BIND nameservers, but not as secondary), but the note remains: use rsync.

       rbldnsd  truncates all TXT records to be at most 255 bytes.  DNS specs allows longer TXTs,
       but long TXTs is something that should be avoided as much as possible - TXT record is used
       as SMTP rejection string.  Note that DNS UDP packet is limited to 512 bytes.  rbldnsd will
       log a warning when such truncation occurs.

VERSION

       This manpage corresponds to rbldnsd version 0.998.

AUTHOR

       The rbldnsd daemon written by Michael Tokarev <mjt+rbldnsd@corpit.ru>, based on  ideas  by
       Dan  Bernstein and his djbdns package, with excellent contributions by Geoffrey T. Dairiki
       <dairiki@dairiki.org>.

LICENCE

       Mostly GPL, with some code licensed under 3-clause BSD license.

                                             Dec 2015                                  rbldnsd(8)