Provided by: lvm2_2.03.16-1ubuntu1_amd64 bug

NAME

       vgconvert — Change volume group metadata format

SYNOPSIS

       vgconvert position_args
           [ option_args ]

DESCRIPTION

       vgconvert  is  no  longer  a  part of LVM.  It was removed along with support for the LVM1
       format.  Use an older version of LVM to convert VGs from the LVM1 format to LVM2.

USAGE

       vgconvert VG ...
           [ -f|--force ]
           [ -M|--metadatatype lvm2 ]
           [    --labelsector Number ]
           [    --bootloaderareasize Size[m|UNIT] ]
           [    --pvmetadatacopies 0|1|2 ]
           [    --metadatasize Size[m|UNIT] ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --bootloaderareasize Size[m|UNIT]
              Reserve space for the bootloader between the LVM metadata area and  the  first  PE.
              The  bootloader  area  is  reserved  for  bootloaders  to  embed  their own data or
              metadata; LVM will not use it.  The bootloader area begins where the first PE would
              otherwise  be  located.   The  first  PE is moved out by the size of the bootloader
              area, and then moved out further if necessary to match  the  data  alignment.   The
              start  of  the  bootloader  area  is  always  aligned, see also --dataalignment and
              --dataalignmentoffset. The bootloader area may be larger than requested due to  the
              alignment, but it's never less than the requested size.  To see the bootloader area
              start and size of an existing PV use pvs -o +pv_ba_start,pv_ba_size.

       --commandprofile String
              The command profile to use for command configuration.   See  lvm.conf(5)  for  more
              information about profiles.

       --config String
              Config  settings  for the command. These override lvm.conf(5) settings.  The String
              arg uses the same format as lvm.conf(5), or  may  use  section/field  syntax.   See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set  debug  level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --devices PV
              Restricts the devices that are visible and accessible to the command.  Devices  not
              listed  will  appear to be missing. This option can be repeated, or accepts a comma
              separated list of devices. This overrides the devices file.

       --devicesfile String
              A  file  listing  devices  that  LVM  should  use.   The   file   must   exist   in
              /etc/lvm/devices/  and  is  managed with the lvmdevices(8) command.  This overrides
              the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For  testing  and
              debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --journal String
              Record  information  in  the  systemd  journal.  This information is in addition to
              information  enabled  by  the  lvm.conf  log/journal  setting.    command:   record
              information  about the command.  output: record the default command output.  debug:
              record full command debugging.

       --labelsector Number
              By default the PV is labelled with an LVM2 identifier in its second sector  (sector
              1).  This lets you use a different sector near the start of the disk (between 0 and
              3 inclusive - see LABEL_SCAN_SECTORS in the source). Use with care.

       --lockopt String
              Used to pass options for special cases  to  lvmlockd.   See  lvmlockd(8)  for  more
              information.

       --longhelp
              Display long help text.

       --metadatasize Size[m|UNIT]
              The  approximate  amount  of space used for each VG metadata area.  The size may be
              rounded.

       -M|--metadatatype lvm2
              Specifies the type of on-disk metadata to use.  lvm2 (or just 2)  is  the  current,
              standard format.  lvm1 (or just 1) is no longer used.

       --nohints
              Do  not  use  the  hints  file  to  locate devices for PVs. A command may read more
              devices to find PVs when hints  are  not  used.  The  command  will  still  perform
              standard hint file invalidation where appropriate.

       --nolocking
              Disable  locking.  Use  with  caution,  concurrent  commands  may produce incorrect
              results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       --pvmetadatacopies 0|1|2
              The number of metadata areas to set aside on a PV for storing VG metadata.  When 2,
              one  copy  of the VG metadata is stored at the front of the PV and a second copy is
              stored at the end.  When 1, one copy of the VG metadata is stored at the  front  of
              the PV.  When 0, no copies of the VG metadata are stored on the given PV.  This may
              be useful in VGs containing many PVs (this places limitations on the ability to use
              vgsplit later.)

       -q|--quiet ...
              Suppress  output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --reportformat basic|json
              Overrides current output format for  reports  which  is  defined  globally  by  the
              report/output_format  setting  in  lvm.conf(5).   basic is the original format with
              columns and rows.  If there is more than one report per  command,  each  report  is
              prefixed  with  the  report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will  not  update  metadata.   This  is  implemented  by
              disabling  all  metadata  writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage  operations  if  a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes.  Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       String See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: b|B is bytes, s|S  is  sectors  of  512
              bytes,  k|K  is  KiB,  m|M  is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
       pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
       lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)