Provided by: systemd-boot_252.5-2ubuntu3_amd64 
NAME
bootctl - Control EFI firmware boot settings and manage boot loader
SYNOPSIS
bootctl [OPTIONS...] {COMMAND}
DESCRIPTION
bootctl can check the EFI firmware and boot loader status, list and manage available boot
loaders and boot loader entries, and install, update, or remove the systemd-boot(7) boot
loader on the current system.
GENERIC EFI FIRMWARE/BOOT LOADER COMMANDS
These commands are available on any EFI system, regardless of the boot loader used.
status
Shows brief information about the system firmware, the boot loader that was used to
boot the system, the boot loaders currently available in the ESP, the boot loaders
listed in the firmware's list of boot loaders and the current default boot loader
entry. If no command is specified, this is the implied default.
See the example below for details of the output.
reboot-to-firmware [BOOL]
Query or set the "Reboot-Into-Firmware-Setup" flag of the EFI firmware. Takes a
boolean argument which controls whether to show the firmware setup on next system
reboot. If the argument is omitted shows the current status of the flag, or whether
the flag is supported. This controls the same flag as systemctl reboot
--firmware-setup, but is more low-level and allows setting the flag independently from
actually requesting a reboot.
Hint: use systemctl reboot --firmware-setup to reboot into firmware setup once. See
systemctl(1) for details.
systemd-efi-options [STRING]
When called without the optional argument, prints the current value of the
"SystemdOptions" EFI variable. When called with an argument, sets the variable to that
value. See systemd(1) for the meaning of that variable.
BOOT LOADER SPECIFICATION COMMANDS
These commands are available for all boot loaders that implement the Boot Loader
Specification[1] and/or the Boot Loader Interface[2], such as systemd-boot.
list
Shows all available boot loader entries implementing the Boot Loader Specification[1],
as well as any other entries discovered or automatically generated by a boot loader
implementing the Boot Loader Interface[2]. JSON output may be requested with --json=.
See the example below for details of the output.
set-default ID, set-oneshot ID
Sets the default boot loader entry. Takes a single boot loader entry ID string or a
glob pattern as argument. The set-oneshot command will set the default entry only for
the next boot, the set-default will set it persistently for all future boots.
bootctl list can be used to list available boot loader entries and their IDs.
In addition, the boot loader entry ID may be specified as one of: @default, @oneshot
or @current, which correspond to the current default boot loader entry for all future
boots, the current default boot loader entry for the next boot, and the currently
booted boot loader entry. These special IDs are resolved to the current values of the
EFI variables LoaderEntryDefault, LoaderEntryOneShot and LoaderEntrySelected, see Boot
Loader Specification[1] for details. These special IDs are primarily useful as a quick
way to persistently make the currently booted boot loader entry the default choice, or
to upgrade the default boot loader entry for the next boot to the default boot loader
entry for all future boots, but may be used for other operations too.
If set to @saved the chosen entry will be saved as an EFI variable on every boot and
automatically selected the next time the boot loader starts.
When an empty string ("") is specified as the ID, then the corresponding EFI variable
will be unset.
Hint: use systemctl reboot --boot-loader-entry=ID to reboot into a specific boot entry
and systemctl reboot --boot-loader-menu=timeout to reboot into the boot loader menu
once. See systemctl(1) for details.
set-timeout TIMEOUT, set-timeout-oneshot TIMEOUT
Sets the boot loader menu timeout in seconds. The set-timeout-oneshot command will set
the timeout only for the next boot. See systemd.time(7) for details about the syntax
of time spans.
If this is set to menu-hidden or 0 no menu is shown and the default entry will be
booted immediately, while setting this to menu-force disables the timeout while always
showing the menu. When an empty string ("") is specified the bootloader will revert to
its default menu timeout.
SYSTEMD-BOOT COMMANDS
These commands manage the systemd-boot EFI boot loader, and do not work in conjunction
with other boot loaders.
install
Installs systemd-boot into the EFI system partition. A copy of systemd-boot will be
stored as the EFI default/fallback loader at ESP/EFI/BOOT/BOOT*.EFI. The boot loader
is then added to the top of the firmware's boot loader list.
update
Updates all installed versions of systemd-boot(7), if the available version is newer
than the version installed in the EFI system partition. This also includes the EFI
default/fallback loader at ESP/EFI/BOOT/BOOT*.EFI. The boot loader is then added to
end of the firmware's boot loader list if missing.
remove
Removes all installed versions of systemd-boot from the EFI system partition and the
firmware's boot loader list.
is-installed
Checks whether systemd-boot is installed in the ESP. Note that a single ESP might host
multiple boot loaders; this hence checks whether systemd-boot is one (of possibly
many) installed boot loaders — and neither whether it is the default nor whether it is
registered in any EFI variables.
random-seed
Generates a random seed and stores it in the EFI System Partition, for use by the
systemd-boot boot loader. Also, generates a random 'system token' and stores it
persistently as an EFI variable, if one has not been set before. If the boot loader
finds the random seed in the ESP and the system token in the EFI variable it will
derive a random seed to pass to the OS and a new seed to store in the ESP from the
combination of both. The random seed passed to the OS is credited to the kernel's
entropy pool by the system manager during early boot, and permits userspace to boot up
with an entropy pool fully initialized very early on. Also see systemd-boot-system-
token.service(8).
See Random Seeds[3] for further information.
OPTIONS
The following options are understood:
--esp-path=
Path to the EFI System Partition (ESP). If not specified, /efi/, /boot/, and
/boot/efi/ are checked in turn. It is recommended to mount the ESP to /efi/, if
possible.
--boot-path=
Path to the Extended Boot Loader partition, as defined in the Boot Loader
Specification[1]. If not specified, /boot/ is checked. It is recommended to mount the
Extended Boot Loader partition to /boot/, if possible.
--root=root
Takes a directory path as an argument. All paths will be prefixed with the given
alternate root path, including config search paths.
--image=image
Takes a path to a disk image file or block device node. If specified, all operations
are applied to file system in the indicated disk image. This option is similar to
--root=, but operates on file systems stored in disk images or block devices. The disk
image should either contain just a file system or a set of file systems within a GPT
partition table, following the Discoverable Partitions Specification[4]. For further
information on supported disk images, see systemd-nspawn(1)'s switch of the same name.
--install-source=
When installing binaries with --root= or --image=, selects where to source them from.
Takes one of "auto" (the default), "image" or "host". With "auto" binaries will be
picked from the specified directory or image, and if not found they will be picked
from the host. With "image" or "host" no fallback search will be performed if the
binaries are not found in the selected source.
-p, --print-esp-path
This option modifies the behaviour of status. Only prints the path to the EFI System
Partition (ESP) to standard output and exits.
-x, --print-boot-path
This option modifies the behaviour of status. Only prints the path to the Extended
Boot Loader partition if it exists, and the path to the ESP otherwise to standard
output and exit. This command is useful to determine where to place boot loader
entries, as they are preferably placed in the Extended Boot Loader partition if it
exists and in the ESP otherwise.
Boot Loader Specification Type #1 entries should generally be placed in the directory
"$(bootctl -x)/loader/entries/". Existence of that directory may also be used as
indication that boot loader entry support is available on the system. Similarly, Boot
Loader Specification Type #2 entries should be placed in the directory "$(bootctl
-x)/EFI/Linux/".
Note that this option (similarly to the --print-booth-path option mentioned above), is
available independently from the boot loader used, i.e. also without systemd-boot
being installed.
--no-variables
Do not touch the firmware's boot loader list stored in EFI variables.
--graceful
Ignore failure when the EFI System Partition cannot be found, when EFI variables
cannot be written, or a different or newer boot loader is already installed. Currently
only applies to is-installed, update, and random-seed verbs.
-q, --quiet
Suppress printing of the results of various commands and also the hints about ESP
being unavailable.
--make-entry-directory=yes|no
Controls creation and deletion of the Boot Loader Specification[1] Type #1 entry
directory on the file system containing resources such as kernel and initrd images
during install and remove, respectively. The directory is named after the entry token,
as specified with --entry-token= parameter described below, and is placed immediately
below the $BOOT root directory (i.e. beneath the file system returned by the
--print-boot-path option, see above). Defaults to "no".
--entry-token=
Controls how to name and identify boot loader entries for this OS installation.
Accepted during install, and takes one of "auto", "machine-id", "os-id", "os-image-id"
or an arbitrary string prefixed by "literal:" as argument.
If set to machine-id the entries are named after the machine ID of the running system
(e.g. "b0e793a9baf14b5fa13ecbe84ff637ac"). See machine-id(5) for details about the
machine ID concept and file.
If set to os-id the entries are named after the OS ID of the running system, i.e. the
ID= field of os-release(5) (e.g. "fedora"). Similarly, if set to os-image-id the
entries are named after the OS image ID of the running system, i.e. the IMAGE_ID=
field of os-release (e.g. "vendorx-cashier-system").
If set to auto (the default), the /etc/kernel/entry-token file will be read if it
exists, and the stored value used. Otherwise if the local machine ID is initialized it
is used. Otherwise IMAGE_ID= from os-release will be used, if set. Otherwise, ID= from
os-release will be used, if set.
Unless set to "machine-id", or when --make-entry-directory=yes is used the selected
token string is written to a file /etc/kernel/entry-token, to ensure it will be used
for future entries. This file is also read by kernel-install(8), in order to identify
under which name to generate boot loader entries for newly installed kernels, or to
determine the entry names for removing old ones.
Using the machine ID for naming the entries is generally preferable, however there are
cases where using the other identifiers is a good option. Specifically: if the
identification data that the machine ID entails shall not be stored on the
(unencrypted) $BOOT partition, or if the ID shall be generated on first boot and is
not known when the entries are prepared. Note that using the machine ID has the
benefit that multiple parallel installations of the same OS can coexist on the same
medium, and they can update their boot loader entries independently. When using
another identifier (such as the OS ID or the OS image ID), parallel installations of
the same OS would try to use the same entry name. To support parallel installations,
the installer must use a different entry token when adding a second installation.
--all-architectures
Install binaries for all supported EFI architectures (this implies --no-variables).
--efi-boot-option-description=
Description of the entry added to the firmware's boot option list. Defaults to "Linux
Boot Manager".
Using the default entry name "Linux Boot Manager" is generally preferable as only one
bootloader installed to a single ESP partition should be used to boot any number of OS
installations found on the various disks installed in the system. Specifically
distributions should not use this flag to install a branded entry in the boot option
list. However in situations with multiple disks, each with their own ESP partition, it
can be beneficial to make it easier to identify the bootloader being used in the
firmware's boot option menu.
--no-pager
Do not pipe output into a pager.
--json=MODE
Shows output formatted as JSON. Expects one of "short" (for the shortest possible
output without any redundant whitespace or line breaks), "pretty" (for a pretty
version of the same, with indentation and line breaks) or "off" (to turn off JSON
output, the default).
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
SIGNED .EFI FILES
bootctl install and update will look for a systemd-boot file ending with the ".efi.signed"
suffix first, and copy that instead of the normal ".efi" file. This allows distributions
or end-users to provide signed images for UEFI SecureBoot.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
ENVIRONMENT
If $SYSTEMD_RELAX_ESP_CHECKS=1 is set the validation checks for the ESP are relaxed, and
the path specified with --esp-path= may refer to any kind of file system on any kind of
partition.
Similarly, $SYSTEMD_RELAX_XBOOTLDR_CHECKS=1 turns off some validation checks for the
Extended Boot Loader partition.
EXAMPLES
Example 1. Output from status and list
$ bootctl status
System:
Firmware: UEFI 2.40 (firmware-version) ← firmware vendor and version
Secure Boot: disabled (setup) ← secure boot status
TPM2 Support: yes
Boot into FW: supported ← does the firmware support booting into itself
Current Boot Loader: ← details about sd-boot or another boot loader
Product: systemd-boot version implementing the Boot Loader Interface[2]
Features: ✓ Boot counting
✓ Menu timeout control
✓ One-shot menu timeout control
✓ Default entry control
✓ One-shot entry control
✓ Support for XBOOTLDR partition
✓ Support for passing random seed to OS
✓ Load drop-in drivers
✓ Boot loader sets ESP information
ESP: /dev/disk/by-partuuid/01234567-89ab-cdef-dead-beef00000000
File: └─/EFI/systemd/systemd-bootx64.efi
Random Seed: ← random seed used for entropy in early boot
Passed to OS: yes
System Token: set
Exists: yes
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/01234567-89ab-cdef-dead-beef00000000)
File: └─/EFI/systemd/systemd-bootx64.efi (systemd-boot 251
File: └─/EFI/BOOT/BOOTX64.EFI (systemd-boot 251
Boot Loaders Listed in EFI Variables:
Title: Linux Boot Manager
ID: 0x0001
Status: active, boot-order
Partition: /dev/disk/by-partuuid/...
File: └─/EFI/systemd/systemd-bootx64.efi
Title: Fedora
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/...
File: └─/EFI/fedora/shimx64.efi
Title: Linux-Firmware-Updater
ID: 0x0002
Status: active, boot-order
Partition: /dev/disk/by-partuuid/...
File: └─/EFI/fedora/fwupdx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/01234567-89ab-cdef-dead-beef00000000)
Default Boot Loader Entry:
type: Boot Loader Specification Type #1 (.conf)
title: Fedora Linux 36 (Workstation Edition)
id: ...
source: /boot/efi/loader/entries/entry-token-kernel-version.conf
version: kernel-version
machine-id: ...
linux: /entry-token/kernel-version/linux
initrd: /entry-token/kernel-version/initrd
options: root=...
$ bootctl list
Boot Loader Entries:
type: Boot Loader Specification Type #1 (.conf)
title: Fedora Linux 36 (Workstation Edition) (default) (selected)
id: ...
source: /boot/efi/loader/entries/entry-token-kernel-version.conf
version: kernel-version
machine-id: ...
linux: /entry-token/kernel-version/linux
initrd: /entry-token/kernel-version/initrd
options: root=...
type: Boot Loader Specification Type #2 (.efi)
title: Fedora Linux 35 (Workstation Edition)
id: ...
source: /boot/efi/EFI/Linux/fedora-kernel-version.efi
version: kernel-version
machine-id: ...
linux: /EFI/Linux/fedora-kernel-version.efi
options: root=...
type: Automatic
title: Reboot Into Firmware Interface
id: auto-reboot-to-firmware-setup
source: /sys/firmware/efi/efivars/LoaderEntries-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f
In the listing, "(default)" specifies the entry that will be used by default, and
"(selected)" specifies the entry that was selected the last time (i.e. is currently
running).
SEE ALSO
systemd-boot(7), Boot Loader Specification[1], Boot Loader Interface[2], systemd-boot-
system-token.service(8)
NOTES
1. Boot Loader Specification
https://systemd.io/BOOT_LOADER_SPECIFICATION
2. Boot Loader Interface
https://systemd.io/BOOT_LOADER_INTERFACE
3. Random Seeds
https://systemd.io/RANDOM_SEEDS
4. Discoverable Partitions Specification
https://systemd.io/DISCOVERABLE_PARTITIONS