Provided by: dbus-daemon_1.14.4-1ubuntu1_amd64 
NAME
dbus-daemon - Message bus daemon
SYNOPSIS
dbus-daemon
dbus-daemon [--version] [--session] [--system] [--config-file=FILE]
[--print-address [=DESCRIPTOR]] [--print-pid [=DESCRIPTOR]] [--fork]
[--nosyslog] [--syslog] [--syslog-only] [--ready-event-handle=value]
DESCRIPTION
dbus-daemon is the D-Bus message bus daemon. See http://www.freedesktop.org/software/dbus/
for more information about the big picture. D-Bus is first a library that provides
one-to-one communication between any two applications; dbus-daemon is an application that
uses this library to implement a message bus daemon. Multiple programs connect to the
message bus daemon and can exchange messages with one another.
There are two standard message bus instances: the systemwide message bus (installed on
many systems as the "messagebus" init service) and the per-user-login-session message bus
(started each time a user logs in). dbus-daemon is used for both of these instances, but
with a different configuration file.
The --session option is equivalent to "--config-file=/usr/share/dbus-1/session.conf" and
the --system option is equivalent to "--config-file=/usr/share/dbus-1/system.conf". By
creating additional configuration files and using the --config-file option, additional
special-purpose message bus daemons could be created.
The systemwide daemon is normally launched by an init script, standardly called simply
"messagebus".
The systemwide daemon is largely used for broadcasting system events, such as changes to
the printer queue, or adding/removing devices.
The per-session daemon is used for various interprocess communication among desktop
applications (however, it is not tied to X or the GUI in any way).
SIGHUP will cause the D-Bus daemon to PARTIALLY reload its configuration file and to flush
its user/group information caches. Some configuration changes would require kicking all
apps off the bus; so they will only take effect if you restart the daemon. Policy changes
should take effect with SIGHUP.
OPTIONS
The following options are supported:
--config-file=FILE
Use the given configuration file.
--fork
Force the message bus to fork and become a daemon, even if the configuration file does
not specify that it should. In most contexts the configuration file already gets this
right, though. This option is not supported on Windows.
--nofork
Force the message bus not to fork and become a daemon, even if the configuration file
specifies that it should. On Windows, the dbus-daemon never forks, so this option is
allowed but does nothing.
--print-address[=DESCRIPTOR]
Print the address of the message bus to standard output, or to the given file
descriptor. This is used by programs that launch the message bus.
--print-pid[=DESCRIPTOR]
Print the process ID of the message bus to standard output, or to the given file
descriptor. This is used by programs that launch the message bus.
--session
Use the standard configuration file for the per-login-session message bus.
--system
Use the standard configuration file for the systemwide message bus.
--version
Print the version of the daemon.
--introspect
Print the introspection information for all D-Bus internal interfaces.
--address[=ADDRESS]
Set the address to listen on. This option overrides the address configured in the
configuration file via the <listen> directive. See the documentation of that directive
for more details.
--systemd-activation
Enable systemd-style service activation. Only useful in conjunction with the systemd
system and session manager on Linux.
--nopidfile
Don't write a PID file even if one is configured in the configuration files.
--syslog
Force the message bus to use the system log for messages, in addition to writing to
standard error, even if the configuration file does not specify that it should. On
Unix, this uses the syslog; on Windows, this uses OutputDebugString().
--syslog-only
Force the message bus to use the system log for messages, and not duplicate them to
standard error. On Unix, this uses the syslog; on Windows, this uses
OutputDebugString().
--nosyslog
Force the message bus to use only standard error for messages, even if the
configuration file specifies that it should use the system log.
--ready-event-handle=value
With this option, the dbus daemon raises an event when it is ready to process
connections. The handle must be the Windows handle for an event object, in the format
printed by the printf format string %p. The parent process must create this event
object (for example with the CreateEvent function) in a nonsignaled state, then
configure it to be inherited by the dbus-daemon process. The dbus-daemon will signal
the event as if via SetEvent when it is ready to receive connections from clients. The
parent process can wait for this to occur by using functions such as
WaitForSingleObject. This option is only supported under Windows. On Unix platforms, a
similar result can be achieved by waiting for the address and/or process ID to be
printed to the inherited file descriptors used for --print-address and/or --print-pid.
CONFIGURATION FILE
A message bus daemon has a configuration file that specializes it for a particular
application. For example, one configuration file might set up the message bus to be a
systemwide message bus, while another might set it up to be a per-user-login-session bus.
The configuration file also establishes resource limits, security parameters, and so
forth.
The configuration file is not part of any interoperability specification and its backward
compatibility is not guaranteed; this document is documentation, not specification.
The standard systemwide and per-session message bus setups are configured in the files
"/usr/share/dbus-1/system.conf" and "/usr/share/dbus-1/session.conf". These files normally
<include> a system-local.conf or session-local.conf in /etc/dbus-1; you can put local
overrides in those files to avoid modifying the primary configuration files.
The standard system bus normally reads additional XML files from
/usr/share/dbus-1/system.d. Third-party packages should install the default policies
necessary for correct operation into that directory, which has been supported since dbus
1.10 (released in 2015).
The standard system bus normally also reads XML files from /etc/dbus-1/system.d, which
should be used by system administrators if they wish to override default policies.
Third-party packages would historically install XML files into /etc/dbus-1/system.d, but
this practice is now considered to be deprecated: that directory should be treated as
reserved for the system administrator.
The configuration file is an XML document. It must have the following doctype declaration:
<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-Bus Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
The following elements may be present in the configuration file.
• <busconfig>
Root element.
• <type>
The well-known type of the message bus. Currently known values are "system" and "session";
if other values are set, they should be either added to the D-Bus specification, or
namespaced. The last <type> element "wins" (previous values are ignored). This element
only controls which message bus specific environment variables are set in activated
clients. Most of the policy that distinguishes a session bus from the system bus is
controlled from the other elements in the configuration file.
If the well-known type of the message bus is "session", then the DBUS_STARTER_BUS_TYPE
environment variable will be set to "session" and the DBUS_SESSION_BUS_ADDRESS environment
variable will be set to the address of the session bus. Likewise, if the type of the
message bus is "system", then the DBUS_STARTER_BUS_TYPE environment variable will be set
to "system" and the DBUS_SYSTEM_BUS_ADDRESS environment variable will be set to the
address of the system bus (which is normally well known anyway).
Example: <type>session</type>
• <include>
Include a file <include>filename.conf</include> at this point. If the filename is
relative, it is located relative to the configuration file doing the including.
<include> has an optional attribute "ignore_missing=(yes|no)" which defaults to "no" if
not provided. This attribute controls whether it's a fatal error for the included file to
be absent.
• <includedir>
Include all files in <includedir>foo.d</includedir> at this point. Files in the directory
are included in undefined order. Only files ending in ".conf" are included.
This is intended to allow extension of the system bus by particular packages. For example,
if CUPS wants to be able to send out notification of printer queue changes, it could
install a file to /usr/share/dbus-1/system.d that allowed all apps to receive this message
and allowed the printer daemon user to send it.
• <user>
The user account the daemon should run as, as either a username or a UID. If the daemon
cannot change to this UID on startup, it will exit. If this element is not present, the
daemon will not change or care about its UID.
The last <user> entry in the file "wins", the others are ignored.
The user is changed after the bus has completed initialization. So sockets etc. will be
created before changing user, but no data will be read from clients before changing user.
This means that sockets and PID files can be created in a location that requires root
privileges for writing.
• <fork>
If present, the bus daemon becomes a real daemon (forks into the background, etc.). This
is generally used rather than the --fork command line option.
• <keep_umask>
If present, the bus daemon keeps its original umask when forking. This may be useful to
avoid affecting the behavior of child processes.
• <syslog>
If present, the bus daemon will log to syslog. The --syslog, --syslog-only and --nosyslog
command-line options take precedence over this setting.
• <pidfile>
If present, the bus daemon will write its pid to the specified file. The --nopidfile
command-line option takes precedence over this setting.
• <allow_anonymous>
If present, connections that authenticated using the ANONYMOUS mechanism will be
authorized to connect. This option has no practical effect unless the ANONYMOUS mechanism
has also been enabled using the <auth> element, described below.
Using this directive in the configuration of the well-known system bus or the well-known
session bus will make that bus insecure and should never be done. Similarly, on custom bus
types, using this directive will usually make the custom bus insecure, unless its
configuration has been specifically designed to prevent anonymous users from causing
damage or escalating privileges.
• <listen>
Add an address that the bus should listen on. The address is in the standard D-Bus format
that contains a transport name plus possible parameters/options.
On platforms other than Windows, unix-based transports (unix, systemd, launchd) are the
default for both the well-known system bus and the well-known session bus, and are
strongly recommended.
On Windows, unix-based transports are not available, so TCP-based transports must be used.
Similar to remote X11, the tcp and nonce-tcp transports have no integrity or
confidentiality protection, so they should normally only be used across the local loopback
interface, for example using an address like tcp:host=127.0.0.1 or
nonce-tcp:host=localhost. In particular, configuring the well-known system bus or the
well-known session bus to listen on a non-loopback TCP address is insecure.
Developers are sometimes tempted to use remote TCP as a debugging tool. However, if this
functionality is left enabled in finished products, the result will be dangerously
insecure. Instead of using remote TCP, developers should relay connections via Secure
Shell or a similar protocol[1].
Remote TCP connections were historically sometimes used to share a single session bus
between login sessions of the same user on different machines within a trusted local area
network, in conjunction with unencrypted remote X11, a NFS-shared home directory and NIS
(YP) authentication. This is insecure against an attacker on the same LAN and should be
considered strongly deprecated; more specifically, it is insecure in the same ways and for
the same reasons as unencrypted remote X11 and NFSv2/NFSv3. The D-Bus maintainers
recommend using a separate session bus per (user, machine) pair, only accessible from
within that machine.
Example: <listen>unix:path=/tmp/foo</listen>
Example: <listen>tcp:host=localhost,port=1234</listen>
If there are multiple <listen> elements, then the bus listens on multiple addresses. The
bus will pass its address to started services or other interested parties with the last
address given in <listen> first. That is, apps will try to connect to the last <listen>
address first.
tcp sockets can accept IPv4 addresses, IPv6 addresses or hostnames. If a hostname resolves
to multiple addresses, the server will bind to all of them. The family=ipv4 or family=ipv6
options can be used to force it to bind to a subset of addresses
Example: <listen>tcp:host=localhost,port=0,family=ipv4</listen>
A special case is using a port number of zero (or omitting the port), which means to
choose an available port selected by the operating system. The port number chosen can be
obtained with the --print-address command line parameter and will be present in other
cases where the server reports its own address, such as when DBUS_SESSION_BUS_ADDRESS is
set.
Example: <listen>tcp:host=localhost,port=0</listen>
tcp/nonce-tcp addresses also allow a bind=hostname option, used in a listenable address to
configure the interface on which the server will listen: either the hostname is the IP
address of one of the local machine's interfaces (most commonly 127.0.0.1), a DNS name
that resolves to one of those IP addresses, '0.0.0.0' to listen on all IPv4 interfaces
simultaneously, or '::' to listen on all IPv4 and IPv6 interfaces simultaneously (if
supported by the OS). If not specified, the default is the same value as "host".
Example: <listen>tcp:host=localhost,bind=0.0.0.0,port=0</listen>
• <auth>
Lists permitted authorization mechanisms. If this element doesn't exist, then all known
mechanisms are allowed. If there are multiple <auth> elements, all the listed mechanisms
are allowed. The order in which mechanisms are listed is not meaningful.
On non-Windows operating systems, allowing only the EXTERNAL authentication mechanism is
strongly recommended. This is the default for the well-known system bus and for the
well-known session bus.
Example: <auth>EXTERNAL</auth>
Example: <auth>DBUS_COOKIE_SHA1</auth>
• <servicedir>
Adds a directory to search for .service files, which tell the dbus-daemon how to start a
program to provide a particular well-known bus name. See the D-Bus Specification for more
details about the contents of .service files.
If a particular service is found in more than one <servicedir>, the first directory listed
in the configuration file takes precedence. If two service files providing the same
well-known bus name are found in the same directory, it is arbitrary which one will be
chosen (this can only happen if at least one of the service files does not have the
recommended name, which is its well-known bus name followed by ".service").
• <standard_session_servicedirs/>
<standard_session_servicedirs/> requests a standard set of session service directories.
Its effect is similar to specifying a series of <servicedir/> elements for each of the
data directories, in the order given here. It is not exactly equivalent, because there is
currently no way to disable directory monitoring or enforce strict service file naming for
a <servicedir/>.
As with <servicedir/> elements, if a particular service is found in more than one service
directory, the first directory takes precedence. If two service files providing the same
well-known bus name are found in the same directory, it is arbitrary which one will be
chosen (this can only happen if at least one of the service files does not have the
recommended name, which is its well-known bus name followed by ".service").
On Unix, the standard session service directories are:
• $XDG_RUNTIME_DIR/dbus-1/services, if XDG_RUNTIME_DIR is set (see the XDG Base
Directory Specification for details of XDG_RUNTIME_DIR): this location is suitable for
transient services created at runtime by systemd generators (see
systemd.generator(7)), session managers or other session infrastructure. It is an
extension provided by the reference implementation of dbus-daemon, and is not
standardized in the D-Bus Specification.
Unlike the other standard session service directories, this directory enforces strict
naming for the service files: the filename must be exactly the well-known bus name of
the service, followed by ".service".
Also unlike the other standard session service directories, this directory is never
monitored with inotify(7) or similar APIs. Programs that create service files in this
directory while a dbus-daemon is running are expected to call the dbus-daemon's
ReloadConfig() method after they have made changes.
• $XDG_DATA_HOME/dbus-1/services, where XDG_DATA_HOME defaults to ~/.local/share (see
the XDG Base Directory Specification): this location is specified by the D-Bus
Specification, and is suitable for per-user, locally-installed software.
• directory/dbus-1/services for each directory in XDG_DATA_DIRS, where XDG_DATA_DIRS
defaults to /usr/local/share:/usr/share (see the XDG Base Directory Specification):
these locations are specified by the D-Bus Specification. The defaults are suitable
for software installed locally by a system administrator (/usr/local/share) or for
software installed from operating system packages (/usr/share). Per-user or
system-wide configuration that sets the XDG_DATA_DIRS environment variable can extend
this search path to cover installations in other locations, for example
~/.local/share/flatpak/exports/share/ and /var/lib/flatpak/exports/share/ when
flatpak(1) is used.
• ${datadir}/dbus-1/services for the ${datadir} that was specified when dbus was
compiled, typically /usr/share: this location is an extension provided by the
reference dbus-daemon implementation, and is suitable for software stacks installed
alongside dbus-daemon.
The "XDG Base Directory Specification" can be found at
http://freedesktop.org/wiki/Standards/basedir-spec if it hasn't moved, otherwise try your
favorite search engine.
On Windows, the standard session service directories are:
• %CommonProgramFiles%/dbus-1/services if %CommonProgramFiles% is set: this location is
suitable for system-wide installed software packages
• A share/dbus-1/services directory found in the same directory hierarchy (prefix) as
the dbus-daemon: this location is suitable for software stacks installed alongside
dbus-daemon
The <standard_session_servicedirs/> option is only relevant to the per-user-session bus
daemon defined in /etc/dbus-1/session.conf. Putting it in any other configuration file
would probably be nonsense.
• <standard_system_servicedirs/>
<standard_system_servicedirs/> specifies the standard system-wide activation directories
that should be searched for service files. As with session services, the first directory
listed has highest precedence.
On Unix, the standard system service directories are:
• /usr/local/share/dbus-1/system-services: this location is specified by the D-Bus
Specification, and is suitable for software installed locally by the system
administrator
• /usr/share/dbus-1/system-services: this location is specified by the D-Bus
Specification, and is suitable for software installed by operating system packages
• ${datadir}/dbus-1/system-services for the ${datadir} that was specified when dbus was
compiled, typically /usr/share: this location is an extension provided by the
reference dbus-daemon implementation, and is suitable for software stacks installed
alongside dbus-daemon
• /lib/dbus-1/system-services: this location is specified by the D-Bus Specification,
and was intended for software installed by operating system packages and used during
early boot (but it should be considered deprecated, because the reference dbus-daemon
is not designed to be available during early boot)
On Windows, there is no standard system bus, so there are no standard system bus
directories either.
The <standard_system_servicedirs/> option is only relevant to the per-system bus daemon
defined in /usr/share/dbus-1/system.conf. Putting it in any other configuration file would
probably be nonsense.
• <servicehelper/>
<servicehelper/> specifies the setuid helper that is used to launch system daemons with an
alternate user. Typically this should be the dbus-daemon-launch-helper executable in
located in libexec.
The <servicehelper/> option is only relevant to the per-system bus daemon defined in
/usr/share/dbus-1/system.conf. Putting it in any other configuration file would probably
be nonsense.
• <limit>
<limit> establishes a resource limit. For example:
<limit name="max_message_size">64</limit>
<limit name="max_completed_connections">512</limit>
The name attribute is mandatory. Available limit names are:
"max_incoming_bytes" : total size in bytes of messages
incoming from a single connection
"max_incoming_unix_fds" : total number of unix fds of messages
incoming from a single connection
"max_outgoing_bytes" : total size in bytes of messages
queued up for a single connection
"max_outgoing_unix_fds" : total number of unix fds of messages
queued up for a single connection
"max_message_size" : max size of a single message in
bytes
"max_message_unix_fds" : max unix fds of a single message
"service_start_timeout" : milliseconds (thousandths) until
a started service has to connect
"auth_timeout" : milliseconds (thousandths) a
connection is given to
authenticate
"pending_fd_timeout" : milliseconds (thousandths) a
fd is given to be transmitted to
dbus-daemon before disconnecting the
connection
"max_completed_connections" : max number of authenticated connections
"max_incomplete_connections" : max number of unauthenticated
connections
"max_connections_per_user" : max number of completed connections from
the same user (only enforced on Unix OSs)
"max_pending_service_starts" : max number of service launches in
progress at the same time
"max_names_per_connection" : max number of names a single
connection can own
"max_match_rules_per_connection": max number of match rules for a single
connection
"max_replies_per_connection" : max number of pending method
replies per connection
(number of calls-in-progress)
"reply_timeout" : milliseconds (thousandths)
until a method call times out
The max incoming/outgoing queue sizes allow a new message to be queued if one byte remains
below the max. So you can in fact exceed the max by max_message_size.
max_completed_connections divided by max_connections_per_user is the number of users that
can work together to denial-of-service all other users by using up all connections on the
systemwide bus.
Limits are normally only of interest on the systemwide bus, not the user session buses.
• <policy>
The <policy> element defines a security policy to be applied to a particular set of
connections to the bus. A policy is made up of <allow> and <deny> elements. Policies are
normally used with the systemwide bus; they are analogous to a firewall in that they allow
expected traffic and prevent unexpected traffic.
Currently, the system bus has a default-deny policy for sending method calls and owning
bus names, and a default-allow policy for receiving messages, sending signals, and sending
a single success or error reply for each method call that does not have the NO_REPLY flag.
Sending more than the expected number of replies is not allowed.
In general, it is best to keep system services as small, targeted programs which run in
their own process and provide a single bus name. Then, all that is needed is an <allow>
rule for the "own" permission to let the process claim the bus name, and a
"send_destination" rule to allow traffic from some or all uids to your service.
The <policy> element has one of four attributes:
context="(default|mandatory)"
at_console="(true|false)"
user="username or userid"
group="group name or gid"
Policies are applied to a connection as follows:
- all context="default" policies are applied
- all group="connection's user's group" policies are applied
in undefined order
- all user="connection's auth user" policies are applied
in undefined order
- all at_console="true" policies are applied
- all at_console="false" policies are applied
- all context="mandatory" policies are applied
Policies applied later will override those applied earlier, when the policies overlap.
Multiple policies with the same user/group/context are applied in the order they appear in
the config file.
<deny>
<allow>
A <deny> element appears below a <policy> element and prohibits some action. The <allow>
element makes an exception to previous <deny> statements, and works just like <deny> but
with the inverse meaning.
The possible attributes of these elements are:
send_interface="interface_name" | "*"
send_member="method_or_signal_name" | "*"
send_error="error_name" | "*"
send_broadcast="true" | "false"
send_destination="name" | "*"
send_destination_prefix="name"
send_type="method_call" | "method_return" | "signal" | "error" | "*"
send_path="/path/name" | "*"
receive_interface="interface_name" | "*"
receive_member="method_or_signal_name" | "*"
receive_error="error_name" | "*"
receive_sender="name" | "*"
receive_type="method_call" | "method_return" | "signal" | "error" | "*"
receive_path="/path/name" | "*"
send_requested_reply="true" | "false"
receive_requested_reply="true" | "false"
eavesdrop="true" | "false"
own="name" | "*"
own_prefix="name"
user="username" | "*"
group="groupname" | "*"
Examples:
<deny send_destination="org.freedesktop.Service" send_interface="org.freedesktop.System" send_member="Reboot"/>
<deny send_destination="org.freedesktop.System"/>
<deny receive_sender="org.freedesktop.System"/>
<deny user="john"/>
<deny group="enemies"/>
The <deny> element's attributes determine whether the deny "matches" a particular action.
If it matches, the action is denied (unless later rules in the config file allow it).
Rules with one or more of the send_* family of attributes are checked in order when a
connection attempts to send a message. The last rule that matches the message determines
whether it may be sent. The well-known session bus normally allows sending any message.
The well-known system bus normally allows sending any signal, selected method calls to the
dbus-daemon, and exactly one reply to each previously-sent method call (either success or
an error). Either of these can be overridden by configuration; on the system bus, services
that will receive method calls must install configuration that allows them to do so,
usually via rules of the form <policy context="default"><allow
send_destination="..."/><policy>.
Rules with one or more of the receive_* family of attributes, or with the eavesdrop
attribute and no others, are checked for each recipient of a message (there might be more
than one recipient if the message is a broadcast or a connection is eavesdropping). The
last rule that matches the message determines whether it may be received. The well-known
session bus normally allows receiving any message, including eavesdropping. The well-known
system bus normally allows receiving any message that was not eavesdropped (any unicast
message addressed to the recipient, and any broadcast message).
The eavesdrop, min_fds and max_fds attributes are modifiers that can be applied to either
send_* or receive_* rules, and are documented below.
send_destination and receive_sender rules mean that messages may not be sent to or
received from the *owner* of the given name, not that they may not be sent *to that name*.
That is, if a connection owns services A, B, C, and sending to A is denied, sending to B
or C will not work either. As a special case, send_destination="*" matches any message
(whether it has a destination specified or not), and receive_sender="*" similarly matches
any message.
A send_destination_prefix rule opens or closes the whole namespace for sending. It means
that messages may or may not be sent to the owner of any name matching the prefix,
regardless of whether it is the primary or the queued owner. In other words, for <allow
send_destination_prefix="a.b"/> rule and names "a.b", "a.b.c", and "a.b.c.d" present on
the bus, it works the same as if three separate rules: <allow send_destination="a.b"/>,
<allow send_destination="a.b.c"/>, and <allow send_destination="a.b.c.d"/> had been
defined. The rules for matching names are the same as in own_prefix (see below): a prefix
of "a.b" matches names "a.b" or "a.b.c" or "a.b.c.d", but not "a.bc" or "a.c". The
send_destination_prefix attribute cannot be combined with the send_destination attribute
in the same rule.
Rules with send_broadcast="true" match signal messages with no destination (broadcasts).
Rules with send_broadcast="false" are the inverse: they match any unicast destination
(unicast signals, together with all method calls, replies and errors) but do not match
messages with no destination (broadcasts). This is not the same as send_destination="*",
which matches any sent message, regardless of whether it has a destination or not.
The other send_* and receive_* attributes are purely textual/by-value matches against the
given field in the message header, except that for the attributes where it is allowed, *
matches any message (whether it has the relevant header field or not). For example,
send_interface="*" matches any sent message, even if it does not contain an interface
header field. More complex glob matching such as foo.bar.* is not allowed.
"Eavesdropping" occurs when an application receives a message that was explicitly
addressed to a name the application does not own, or is a reply to such a message.
Eavesdropping thus only applies to messages that are addressed to services and replies to
such messages (i.e. it does not apply to signals).
For <allow>, eavesdrop="true" indicates that the rule matches even when eavesdropping.
eavesdrop="false" is the default and means that the rule only allows messages to go to
their specified recipient. For <deny>, eavesdrop="true" indicates that the rule matches
only when eavesdropping. eavesdrop="false" is the default for <deny> also, but here it
means that the rule applies always, even when not eavesdropping. The eavesdrop attribute
can only be combined with send and receive rules (with send_* and receive_* attributes).
The [send|receive]_requested_reply attribute works similarly to the eavesdrop attribute.
It controls whether the <deny> or <allow> matches a reply that is expected (corresponds to
a previous method call message). This attribute only makes sense for reply messages
(errors and method returns), and is ignored for other message types.
For <allow>, [send|receive]_requested_reply="true" is the default and indicates that only
requested replies are allowed by the rule. [send|receive]_requested_reply="false" means
that the rule allows any reply even if unexpected.
For <deny>, [send|receive]_requested_reply="false" is the default but indicates that the
rule matches only when the reply was not requested. [send|receive]_requested_reply="true"
indicates that the rule applies always, regardless of pending reply state.
The min_fds and max_fds attributes modify either send_* or receive_* rules. A rule with
the min_fds attribute only matches messages if they have at least that many Unix file
descriptors attached. Conversely, a rule with the max_fds attribute only matches messages
if they have no more than that many file descriptors attached. In practice, rules with
these attributes will most commonly take the form <allow send_destination="..."
max_fds="0"/>, <deny send_destination="..." min_fds="1"/> or <deny receive_sender="*"
min_fds="1"/>.
Rules with the user or group attribute are checked when a new connection to the message
bus is established, and control whether the connection can continue. Each of these
attributes cannot be combined with any other attribute. As a special case, both user="*"
and group="*" match any connection. If there are no rules of this form, the default is to
allow connections from the same user ID that owns the dbus-daemon process. The well-known
session bus normally uses that default behaviour, while the well-known system bus normally
allows any connection.
Rules with the own or own_prefix attribute are checked when a connection attempts to own a
well-known bus names. As a special case, own="*" matches any well-known bus name. The
well-known session bus normally allows any connection to own any name, while the
well-known system bus normally does not allow any connection to own any name, except where
allowed by further configuration. System services that will own a name must install
configuration that allows them to do so, usually via rules of the form <policy
user="some-system-user"><allow own="..."/></policy>.
<allow own_prefix="a.b"/> allows you to own the name "a.b" or any name whose first
dot-separated elements are "a.b": in particular, you can own "a.b.c" or "a.b.c.d", but not
"a.bc" or "a.c". This is useful when services like Telepathy and ReserveDevice define a
meaning for subtrees of well-known names, such as
org.freedesktop.Telepathy.ConnectionManager.(anything) and
org.freedesktop.ReserveDevice1.(anything).
It does not make sense to deny a user or group inside a <policy> for a user or group;
user/group denials can only be inside context="default" or context="mandatory" policies.
A single <deny> rule may specify combinations of attributes such as send_destination and
send_interface and send_type. In this case, the denial applies only if both attributes
match the message being denied. e.g. <deny send_interface="foo.bar"
send_destination="foo.blah"/> would deny messages with the given interface AND the given
bus name. To get an OR effect you specify multiple <deny> rules.
You can't include both send_ and receive_ attributes on the same rule, since "whether the
message can be sent" and "whether it can be received" are evaluated separately.
Be careful with send_interface/receive_interface, because the interface field in messages
is optional. In particular, do NOT specify <deny send_interface="org.foo.Bar"/>! This will
cause no-interface messages to be blocked for all services, which is almost certainly not
what you intended. Always use rules of the form: <deny send_interface="org.foo.Bar"
send_destination="org.foo.Service"/>
• <selinux>
The <selinux> element contains settings related to Security Enhanced Linux. More details
below.
• <associate>
An <associate> element appears below an <selinux> element and creates a mapping. Right now
only one kind of association is possible:
<associate own="org.freedesktop.Foobar" context="foo_t"/>
This means that if a connection asks to own the name "org.freedesktop.Foobar" then the
source context will be the context of the connection and the target context will be
"foo_t" - see the short discussion of SELinux below.
Note, the context here is the target context when requesting a name, NOT the context of
the connection owning the name.
There's currently no way to set a default for owning any name, if we add this syntax it
will look like:
<associate own="*" context="foo_t"/>
If you find a reason this is useful, let the developers know. Right now the default will
be the security context of the bus itself.
If two <associate> elements specify the same name, the element appearing later in the
configuration file will be used.
• <apparmor>
The <apparmor> element is used to configure AppArmor mediation on the bus. It can contain
one attribute that specifies the mediation mode:
<apparmor mode="(enabled|disabled|required)"/>
The default mode is "enabled". In "enabled" mode, AppArmor mediation will be performed if
AppArmor support is available in the kernel. If it is not available, dbus-daemon will
start but AppArmor mediation will not occur. In "disabled" mode, AppArmor mediation is
disabled. In "required" mode, AppArmor mediation will be enabled if AppArmor support is
available, otherwise dbus-daemon will refuse to start.
The AppArmor mediation mode of the bus cannot be changed after the bus starts. Modifying
the mode in the configuration file and sending a SIGHUP signal to the daemon has no effect
on the mediation mode.
INTEGRATING SESSION SERVICES
Integration files are not mandatory for session services: any program with access to the
session bus can request a well-known name and provide D-Bus interfaces.
Many D-Bus session services support service activation, a mechanism in which the
dbus-daemon can launch the service on-demand, either by running the session service itself
or by communicating with systemd --user. This is set up by creating a service file in the
directory ${datadir}/dbus-1/services, for example:
[D-BUS Service]
Name=com.example.SessionService1
Exec=/usr/bin/example-session-service
# Optional
SystemdService=example-session-service
See the D-Bus Specification[2] for details of the contents and interpretation of service
files.
If there is a service file for com.example.SessionService1, it should be named
com.example.SessionService1.service, although for compatibility with legacy services this
is not mandatory.
Session services that declare the optional SystemdService must also provide a systemd user
service unit file whose name or Alias matches the SystemdService (see systemd.unit(5),
systemd.service(5) for further details on systemd service units), for example:
[Unit]
Description=Example session service
[Service]
Type=dbus
BusName=com.example.SessionService1
ExecStart=/usr/bin/example-session-service
INTEGRATING SYSTEM SERVICES
The standard system bus does not allow method calls or owning well-known bus names by
default, so a useful D-Bus system service will normally need to configure a default
security policy that allows it to work. D-Bus system services should install a default
policy file in ${datadir}/dbus-1/service.d, containing the policy rules necessary to make
that system service functional. A best-practice policy file will often look like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
<policy user="_example">
<allow own="com.example.Example1"/>
</policy>
<policy context="default">
<allow send_destination="com.example.Example1"/>
</policy>
</busconfig>
where _example is the username of the system uid that will run the system service daemon
process, and com.example.Example1 is its well-known bus name.
The policy file for com.example.Example1 should normally be named
com.example.Example1.conf.
Some existing system services rely on more complex <policy> rules to control the messages
that the service can receive. However, the dbus-daemon's policy language is not
well-suited to finer-grained policies: any policy has to be expressed in terms of D-Bus
interfaces and method names, not in terms of higher-level domain-specific concepts like
removable or built-in devices. It is recommended that new services should normally accept
method call messages from all callers, then apply a sysadmin-controllable policy to decide
whether to obey the requests contained in those method call messages, for example by
consulting polkit[3].
Like session services, many D-Bus system services support service activation, a mechanism
in which the dbus-daemon can launch the service on-demand, either by running the system
service itself or by communicating with systemd. This is set up by creating a service file
in the directory ${datadir}/dbus-1/system-services, for example:
[D-BUS Service]
Name=com.example.Example1
Exec=/usr/sbin/example-service
User=_example
# Optional
SystemdService=dbus-com.example.Example1.service
See the D-Bus Specification[2] for details of the contents and interpretation of service
files.
If there is a service file for com.example.Example1, it must be named
com.example.Example1.service.
System services that declare the optional SystemdService must also provide a systemd
service unit file whose name or Alias matches the SystemdService (see systemd.unit(5),
systemd.service(5) for further details on systemd service units), for example:
[Unit]
Description=Example service
[Service]
Type=dbus
BusName=com.example.Example1
ExecStart=/usr/sbin/example-service
[Install]
WantedBy=multi-user.target
Alias=dbus-com.example.Example1.service
SELINUX
See http://www.nsa.gov/selinux/ for full details on SELinux. Some useful excerpts:
Every subject (process) and object (e.g. file, socket, IPC object, etc) in the system is
assigned a collection of security attributes, known as a security context. A security
context contains all of the security attributes associated with a particular subject or
object that are relevant to the security policy.
In order to better encapsulate security contexts and to provide greater efficiency, the
policy enforcement code of SELinux typically handles security identifiers (SIDs) rather
than security contexts. A SID is an integer that is mapped by the security server to a
security context at runtime.
When a security decision is required, the policy enforcement code passes a pair of SIDs
(typically the SID of a subject and the SID of an object, but sometimes a pair of subject
SIDs or a pair of object SIDs), and an object security class to the security server. The
object security class indicates the kind of object, e.g. a process, a regular file, a
directory, a TCP socket, etc.
Access decisions specify whether or not a permission is granted for a given pair of SIDs
and class. Each object class has a set of associated permissions defined to control
operations on objects with that class.
D-Bus performs SELinux security checks in two places.
First, any time a message is routed from one connection to another connection, the bus
daemon will check permissions with the security context of the first connection as source,
security context of the second connection as target, object class "dbus" and requested
permission "send_msg".
If a security context is not available for a connection (impossible when using UNIX domain
sockets), then the target context used is the context of the bus daemon itself. There is
currently no way to change this default, because we're assuming that only UNIX domain
sockets will be used to connect to the systemwide bus. If this changes, we'll probably add
a way to set the default connection context.
Second, any time a connection asks to own a name, the bus daemon will check permissions
with the security context of the connection as source, the security context specified for
the name in the config file as target, object class "dbus" and requested permission
"acquire_svc".
The security context for a bus name is specified with the <associate> element described
earlier in this document. If a name has no security context associated in the
configuration file, the security context of the bus daemon itself will be used.
APPARMOR
The AppArmor confinement context is stored when applications connect to the bus. The
confinement context consists of a label and a confinement mode. When a security decision
is required, the daemon uses the confinement context to query the AppArmor policy to
determine if the action should be allowed or denied and if the action should be audited.
The daemon performs AppArmor security checks in three places.
First, any time a message is routed from one connection to another connection, the bus
daemon will check permissions with the label of the first connection as source, label
and/or connection name of the second connection as target, along with the bus name, the
path name, the interface name, and the member name. Reply messages, such as method_return
and error messages, are implicitly allowed if they are in response to a message that has
already been allowed.
Second, any time a connection asks to own a name, the bus daemon will check permissions
with the label of the connection as source, the requested name as target, along with the
bus name.
Third, any time a connection attempts to eavesdrop, the bus daemon will check permissions
with the label of the connection as the source, along with the bus name.
AppArmor rules for bus mediation are not stored in the bus configuration files. They are
stored in the application's AppArmor profile. Please see apparmor.d(5) for more details.
DEBUGGING
If you're trying to figure out where your messages are going or why you aren't getting
messages, there are several things you can try.
Remember that the system bus is heavily locked down and if you haven't installed a
security policy file to allow your message through, it won't work. For the session bus,
this is not a concern.
The simplest way to figure out what's happening on the bus is to run the dbus-monitor
program, which comes with the D-Bus package. You can also send test messages with
dbus-send. These programs have their own man pages.
If you want to know what the daemon itself is doing, you might consider running a separate
copy of the daemon to test against. This will allow you to put the daemon under a
debugger, or run it with verbose output, without messing up your real session and system
daemons.
To run a separate test copy of the daemon, for example you might open a terminal and type:
DBUS_VERBOSE=1 dbus-daemon --session --print-address
The test daemon address will be printed when the daemon starts. You will need to
copy-and-paste this address and use it as the value of the DBUS_SESSION_BUS_ADDRESS
environment variable when you launch the applications you want to test. This will cause
those applications to connect to your test bus instead of the DBUS_SESSION_BUS_ADDRESS of
your real session bus.
DBUS_VERBOSE=1 will have NO EFFECT unless your copy of D-Bus was compiled with verbose
mode enabled. This is not recommended in production builds due to performance impact. You
may need to rebuild D-Bus if your copy was not built with debugging in mind. (DBUS_VERBOSE
also affects the D-Bus library and thus applications using D-Bus; it may be useful to see
verbose output on both the client side and from the daemon.)
If you want to get fancy, you can create a custom bus configuration for your test bus (see
the session.conf and system.conf files that define the two default configurations for
example). This would allow you to specify a different directory for .service files, for
example.
AUTHOR
See http://www.freedesktop.org/software/dbus/doc/AUTHORS
BUGS
Please send bug reports to the D-Bus mailing list or bug tracker, see
http://www.freedesktop.org/software/dbus/
NOTES
1. relay connections via Secure Shell or a similar protocol
https://lists.freedesktop.org/archives/dbus/2018-April/017447.html
2. D-Bus Specification
https://dbus.freedesktop.org/doc/dbus-specification.html
3. polkit
https://www.freedesktop.org/wiki/Software/polkit/