Provided by: libcrypt-dev_4.4.33-2_amd64 
NAME
crypt — storage format for hashed passphrases and available hashing methods
DESCRIPTION
The hashing methods implemented by crypt(3) are designed only to process user passphrases
for storage and authentication; they are not suitable for use as general-purpose
cryptographic hashes.
Passphrase hashing is not a replacement for strong passphrases. It is always possible for
an attacker with access to the hashed passphrases to guess and check possible cleartext
passphrases. However, with a strong hashing method, guessing will be too slow for the
attacker to discover a strong passphrase.
All of the hashing methods use a “salt” to perturb the hash function, so that the same
passphrase may produce many possible hashes. Newer methods accept longer salt strings. The
salt should be chosen at random for each user. Salt defeats a number of attacks:
1. It is not possible to hash a passphrase once and then test it against each account's
stored hash; the hash calculation must be repeated for each account.
2. It is not possible to tell whether two accounts use the same passphrase without
successfully guessing one of the phrases.
3. Tables of precalculated hashes of commonly used passphrases must have an entry for each
possible salt, which makes them impractically large.
All of the hashing methods are also deliberately engineered to be slow; they use many
iterations of an underlying cryptographic primitive to increase the cost of each guess. The
newer hashing methods allow the number of iterations to be adjusted, using the “CPU time
cost” parameter to crypt_gensalt(3). This makes it possible to keep the hash slow as
hardware improves.
FORMAT OF HASHED PASSPHRASES
All of the hashing methods supported by crypt(3) produce a hashed passphrase which consists
of four components: prefix, options, salt, and hash. The prefix controls which hashing
method is to be used, and is the appropriate string to pass to crypt_gensalt(3) to select
that method. The contents of options, salt, and hash are up to the method. Depending on
the method, the prefix and options components may be empty.
The setting argument to crypt(3) must begin with the first three components of a valid
hashed passphrase, but anything after that is ignored. This makes authentication simple:
hash the input passphrase using the stored passphrase as the setting, and then compare the
result to the stored passphrase.
Hashed passphrases are always entirely printable ASCII, and do not contain any whitespace or
the characters ‘:’, ‘;’, ‘*’, ‘!’, or ‘\’. (These characters are used as delimiters and
special markers in the passwd(5) and shadow(5) files.)
The syntax of each component of a hashed passphrase is up to the hashing method. ‘$’
characters usually delimit components, and the salt and hash are usually encoded as numerals
in base 64. The details of this base-64 encoding vary among hashing methods. The common
“base64” encoding specified by RFC 4648 is usually not used.
AVAILABLE HASHING METHODS
This is a list of all the hashing methods supported by crypt(3), in decreasing order of
strength. Many of the older methods are now considered too weak to use for new passphrases.
The hashed passphrase format is expressed with extended regular expressions (see regex(7))
and does not show the division into prefix, options, salt, and hash.
yescrypt
yescrypt is a scalable passphrase hashing scheme designed by Solar Designer, which is based
on Colin Percival's scrypt. Recommended for new hashes.
Prefix
"$y$"
Hashed passphrase format
\$y\$[./A-Za-z0-9]+\$[./A-Za-z0-9]{,86}\$[./A-Za-z0-9]{43}
Maximum passphrase length
unlimited
Hash size
256 bits
Salt size
up to 512 (128+ recommended) bits
CPU time cost parameter
1 to 11 (logarithmic)
gost-yescrypt
gost-yescrypt uses the output from the yescrypt hashing method in place of a hmac message.
Thus, the yescrypt crypto properties are superseded by the GOST R 34.11-2012 (Streebog) hash
function with a 256 bit digest. This hashing method is useful in applications that need
modern passphrase hashing methods, but require to rely on the cryptographic properties of
GOST algorithms. The GOST R 34.11-2012 (Streebog) hash function has been published by the
IETF as RFC 6986. Recommended for new hashes.
Prefix
"$gy$"
Hashed passphrase format
\$gy\$[./A-Za-z0-9]+\$[./A-Za-z0-9]{,86}\$[./A-Za-z0-9]{43}
Maximum passphrase length
unlimited
Hash size
256 bits
Salt size
up to 512 (128+ recommended) bits
CPU time cost parameter
1 to 11 (logarithmic)
scrypt
scrypt is a password-based key derivation function created by Colin Percival, originally for
the Tarsnap online backup service. The algorithm was specifically designed to make it
costly to perform large-scale custom hardware attacks by requiring large amounts of memory.
In 2016, the scrypt algorithm was published by IETF as RFC 7914.
Prefix
"$7$"
Hashed passphrase format
\$7\$[./A-Za-z0-9]{11,97}\$[./A-Za-z0-9]{43}
Maximum passphrase length
unlimited
Hash size
256 bits
Salt size
up to 512 (128+ recommended) bits
CPU time cost parameter
6 to 11 (logarithmic)
bcrypt
A hash based on the Blowfish block cipher, modified to have an extra-expensive key schedule.
Originally developed by Niels Provos and David Mazieres for OpenBSD and also supported on
recent versions of FreeBSD and NetBSD, on Solaris 10 and newer, and on several GNU/*/Linux
distributions.
Prefix
"$2b$"
Hashed passphrase format
\$2[abxy]\$[0-9]{2}\$[./A-Za-z0-9]{53}
Maximum passphrase length
72 characters
Hash size
184 bits
Salt size
128 bits
CPU time cost parameter
4 to 31 (logarithmic)
The alternative prefix "$2y$" is equivalent to "$2b$". It exists for historical reasons
only. The alternative prefixes "$2a$" and "$2x$" provide bug-compatibility with
crypt_blowfish 1.0.4 and earlier, which incorrectly processed characters with the 8th bit
set.
sha512crypt
A hash based on SHA-2 with 512-bit output, originally developed by Ulrich Drepper for GNU
libc. Supported on Linux but not common elsewhere. Acceptable for new hashes. The default
CPU time cost parameter is 5000, which is too low for modern hardware.
Prefix
"$6$"
Hashed passphrase format
\$6\$(rounds=[1-9][0-9]+\$)?[^$:\n]{1,16}\$[./0-9A-Za-z]{86}
Maximum passphrase length
unlimited
Hash size
512 bits
Salt size
6 to 96 bits
CPU time cost parameter
1000 to 999,999,999
sha256crypt
A hash based on SHA-2 with 256-bit output, originally developed by Ulrich Drepper for GNU
libc. Supported on Linux but not common elsewhere. Acceptable for new hashes. The default
CPU time cost parameter is 5000, which is too low for modern hardware.
Prefix
"$5$"
Hashed passphrase format
\$5\$(rounds=[1-9][0-9]+\$)?[^$:\n]{1,16}\$[./0-9A-Za-z]{43}
Maximum passphrase length
unlimited
Hash size
256 bits
Salt size
6 to 96 bits
CPU time cost parameter
1000 to 999,999,999
sha1crypt
A hash based on HMAC-SHA1. Originally developed by Simon Gerraty for NetBSD. Not as weak
as the DES-based hashes below, but SHA1 is so cheap on modern hardware that it should not be
used for new hashes.
Prefix
"$sha1"
Hashed passphrase format
\$sha1\$[1-9][0-9]+\$[./0-9A-Za-z]{1,64}\$[./0-9A-Za-z]{8,64}[./0-9A-Za-z]{32}
Maximum passphrase length
unlimited
Hash size
160 bits
Salt size
6 to 384 bits
CPU time cost parameter
4 to 4,294,967,295
SunMD5
A hash based on the MD5 algorithm, with additional cleverness to make precomputation
difficult, originally developed by Alec David Muffet for Solaris. Not adopted elsewhere, to
our knowledge. Not as weak as the DES-based hashes below, but MD5 is so cheap on modern
hardware that it should not be used for new hashes.
Prefix
"$md5"
Hashed passphrase format
\$md5(,rounds=[1-9][0-9]+)?\$[./0-9A-Za-z]{8}\${1,2}[./0-9A-Za-z]{22}
Maximum passphrase length
unlimited
Hash size
128 bits
Salt size
48 bits
CPU time cost parameter
4096 to 4,294,963,199
md5crypt
A hash based on the MD5 algorithm, originally developed by Poul-Henning Kamp for FreeBSD.
Supported on most free Unixes and newer versions of Solaris. Not as weak as the DES-based
hashes below, but MD5 is so cheap on modern hardware that it should not be used for new
hashes. CPU time cost is not adjustable.
Prefix
"$1$"
Hashed passphrase format
\$1\$[^$:\n]{1,8}\$[./0-9A-Za-z]{22}
Maximum passphrase length
unlimited
Hash size
128 bits
Salt size
6 to 48 bits
CPU time cost parameter
1000
bsdicrypt (BSDI extended DES)
A weak extension of traditional DES, which eliminates the length limit, increases the salt
size, and makes the time cost tunable. It originates with BSDI and is also available on at
least NetBSD, OpenBSD, and FreeBSD due to the use of David Burren's FreeSec library. It is
better than bigcrypt and traditional DES, but still should not be used for new hashes.
Prefix
"_"
Hashed passphrase format
_[./0-9A-Za-z]{19}
Maximum passphrase length
unlimited (ignores 8th bit)
Hash size
64 bits
Effective key size
56 bits
Salt size
24 bits
CPU time cost parameter
1 to 16,777,215 (must be odd)
bigcrypt
A weak extension of traditional DES, available on some System V-derived Unixes. All it does
is raise the length limit from 8 to 128 characters, and it does this in a crude way that
allows attackers to guess chunks of a long passphrase in parallel. It should not be used
for new hashes.
Prefix
"" (empty string)
Hashed passphrase format
[./0-9A-Za-z]{13,178}
Maximum passphrase length
128 characters (ignores 8th bit)
Hash size
up to 1024 bits
Effective key size
up to 896 bits
Salt size
12 bits
CPU time cost parameter
25
descrypt (Traditional DES)
The original hashing method from Unix V7, based on the DES block cipher. Because DES is
cheap on modern hardware, because there are only 4096 possible salts and 2**56 possible
hashes, and because it truncates passphrases to 8 characters, it is feasible to discover any
passphrase hashed with this method. It should only be used if you absolutely have to
generate hashes that will work on an old operating system that supports nothing else.
Prefix
"" (empty string)
Hashed passphrase format
[./0-9A-Za-z]{13}
Maximum passphrase length
8 characters (ignores 8th bit)
Hash size
64 bits
Effective key size
56 bits
Salt size
12 bits
CPU time cost parameter
25
NT
The hashing method used for network authentication in some versions of the SMB/CIFS
protocol. Available, for cross-compatibility's sake, on FreeBSD. Based on MD4. Has no
salt or tunable cost parameter. Like traditional DES, it is so weak that any passphrase
hashed with this method is guessable. It should only be used if you absolutely have to
generate hashes that will work on an old operating system that supports nothing else.
Prefix
"$3$"
Hashed passphrase format
\$3\$\$[0-9a-f]{32}
Maximum passphrase length
unlimited
Hash size
256 bits
Salt size
0 bits
CPU time cost parameter
1
SEE ALSO
crypt(3), crypt_gensalt(3), getpwent(3), passwd(5), shadow(5), pam(8)
Niels Provos and David Mazieres, “A Future-Adaptable Password Scheme”, Proceedings of the
1999 USENIX Annual Technical Conference, https://www.usenix.org/events/usenix99/provos.html,
June 1999.
Robert Morris and Ken Thompson, “Password Security: A Case History”, Communications of the
ACM, 11, 22, http://wolfram.schneider.org/bsd/7thEdManVol2/password/password.pdf, 1979.