Ubuntu Manpage: ldap_table - Postfix LDAP client configuration

Provided by: postfix-ldap_3.7.4-2build1_amd64

NAME

       ldap_table - Postfix LDAP client configuration

SYNOPSIS

       postmap -q "string" ldap:/etc/postfix/filename

       postmap -q - ldap:/etc/postfix/filename <inputfile

DESCRIPTION

       The  Postfix mail system uses optional tables for address rewriting or mail routing. These
       tables are usually in dbm or db format.

       Alternatively, lookup tables can be specified as LDAP databases.

       In order to use LDAP lookups, define an LDAP source as a  lookup  table  in  main.cf,  for
       example:

           alias_maps = ldap:/etc/postfix/ldap-aliases.cf

       The file /etc/postfix/ldap-aliases.cf has the same format as the Postfix main.cf file, and
       can specify the parameters described below. An example is given at the end of this manual.

       This configuration method is available with  Postfix  version  2.1  and  later.   See  the
       section "OBSOLETE MAIN.CF PARAMETERS" below for older Postfix versions.

       For details about LDAP SSL and STARTTLS, see the section on SSL and STARTTLS below.

LIST MEMBERSHIP

       When  using  LDAP  to  store  lists  such  as $mynetworks, $mydestination, $relay_domains,
       $local_recipient_maps, etc., it is important to understand that the table must store  each
       list  member  as a separate key. The table lookup verifies the *existence* of the key. See
       "Postfix lists versus tables" in the DATABASE_README document for a discussion.

       Do NOT  create  tables  that  return  the  full  list  of  domains  in  $mydestination  or
       $relay_domains etc., or IP addresses in $mynetworks.

       DO  create  tables with each matching item as a key and with an arbitrary value. With LDAP
       databases it is not uncommon to return the key itself.

       For example, NEVER do this in a map defining $mydestination:

           query_filter = domain=*
           result_attribute = domain

       Do this instead:

           query_filter = domain=%s
           result_attribute = domain

GENERAL LDAP PARAMETERS

In the text below, default values are given in parentheses. Note: don't use quotes in
these variables; at least, not until the Postfix configuration routines understand how to
deal with quoted strings.

server_host (default: localhost)
The name of the host running the LDAP server, e.g.

server_host = ldap.example.com

Depending on the LDAP client library you're using, it should be possible to specify
multiple servers here, with the library trying them in order should the first one
fail. It should also be possible to give each server in the list a different port
(overriding server_port below), by naming them like

server_host = ldap.example.com:1444

With OpenLDAP, a (list of) LDAP URLs can be used to specify both the hostname(s)
and the port(s):

server_host = ldap://ldap.example.com:1444
ldap://ldap2.example.com:1444

All LDAP URLs accepted by the OpenLDAP library are supported, including connections
over UNIX domain sockets, and LDAP SSL (the last one provided that OpenLDAP was
compiled with support for SSL):

server_host = ldapi://%2Fsome%2Fpath
ldaps://ldap.example.com:636

server_port (default: 389)
The port the LDAP server listens on, e.g.

server_port = 778

timeout (default: 10 seconds)
The number of seconds a search can take before timing out, e.g.

timeout = 5

search_base (No default; you must configure this)
The RFC2253 base DN at which to conduct the search, e.g.

search_base = dc=your, dc=com

With Postfix 2.2 and later this parameter supports the following '%' expansions:

%% This is replaced by a literal '%' character.

%s This is replaced by the input key. RFC 2253 quoting is used to make sure
that the input key does not add unexpected metacharacters.

%u When the input key is an address of the form user@domain, %u is replaced by
the (RFC 2253) quoted local part of the address. Otherwise, %u is replaced
by the entire search string. If the localpart is empty, the search is
suppressed and returns no results.

%d When the input key is an address of the form user@domain, %d is replaced by
the (RFC 2253) quoted domain part of the address. Otherwise, the search is
suppressed and returns no results.

%[SUD] For the search_base parameter, the upper-case equivalents of the above
expansions behave identically to their lower-case counter-parts. With the
result_format parameter (previously called result_filter see the OTHER
OBSOLETE FEATURES section and below), they expand to the corresponding
components of input key rather than the result value.

%[1-9] The patterns %1, %2, ... %9 are replaced by the corresponding most
significant component of the input key's domain. If the input key is
user@mail.example.com, then %1 is com, %2 is example and %3 is mail. If the
input key is unqualified or does not have enough domain components to
satisfy all the specified patterns, the search is suppressed and returns no
results.

query_filter (default: mailacceptinggeneralid=%s)
The RFC2254 filter used to search the directory, where %s is a substitute for the
address Postfix is trying to resolve, e.g.

query_filter = (&(mail=%s)(paid_up=true))

This parameter supports the following '%' expansions:

%% This is replaced by a literal '%' character. (Postfix 2.2 and later).

%s This is replaced by the input key. RFC 2254 quoting is used to make sure
that the input key does not add unexpected metacharacters.

%u When the input key is an address of the form user@domain, %u is replaced by
the (RFC 2254) quoted local part of the address. Otherwise, %u is replaced
by the entire search string. If the localpart is empty, the search is
suppressed and returns no results.

%d When the input key is an address of the form user@domain, %d is replaced by
the (RFC 2254) quoted domain part of the address. Otherwise, the search is
suppressed and returns no results.

%[SUD] The upper-case equivalents of the above expansions behave in the
query_filter parameter identically to their lower-case counter-parts. With
the result_format parameter (previously called result_filter see the OTHER
OBSOLETE FEATURES section and below), they expand to the corresponding
components of input key rather than the result value.

The above %S, %U and %D expansions are available with Postfix 2.2 and later.

The above %1, ..., %9 expansions are available with Postfix 2.2 and later.

The "domain" parameter described below limits the input keys to addresses in
matching domains. When the "domain" parameter is non-empty, LDAP queries for
unqualified addresses or addresses in non-matching domains are suppressed and
return no results.

NOTE: DO NOT put quotes around the query_filter parameter.

result_format (default: %s)
Called result_filter in Postfix releases prior to 2.2. Format template applied to
result attributes. Most commonly used to append (or prepend) text to the result.
This parameter supports the following '%' expansions:

%% This is replaced by a literal '%' character. (Postfix 2.2 and later).

%s This is replaced by the value of the result attribute. When result is empty
it is skipped.

%u When the result attribute value is an address of the form user@domain, %u is
replaced by the local part of the address. When the result has an empty
localpart it is skipped.

%d When a result attribute value is an address of the form user@domain, %d is
replaced by the domain part of the attribute value. When the result is
unqualified it is skipped.

%[SUD1-9]
The upper-case and decimal digit expansions interpolate the parts of the
input key rather than the result. Their behavior is identical to that
described with query_filter, and in fact because the input key is known in
advance, lookups whose key does not contain all the information specified in
the result template are suppressed and return no results.

The above %S, %U, %D and %1, ..., %9 expansions are available with Postfix
2.2 and later.

For example, using "result_format = smtp:[%s]" allows one to use a mailHost
attribute as the basis of a transport(5) table. After applying the result format,
multiple values are concatenated as comma separated strings. The expansion_limit
and size_limit parameters explained below allow one to restrict the number of
values in the result, which is especially useful for maps that should return a
single value.

The default value %s specifies that each attribute value should be used as is.

This parameter was called result_filter in Postfix releases prior to 2.2. If no
"result_format" is specified, the value of "result_filter" will be used instead
before resorting to the default value. This provides compatibility with old
configuration files.

NOTE: DO NOT put quotes around the result format!

domain (default: no domain list)
This is a list of domain names, paths to files, or "type:table" databases. When
specified, only fully qualified search keys with a *non-empty* localpart and a
matching domain are eligible for lookup: 'user' lookups, bare domain lookups and
"@domain" lookups are not performed. This can significantly reduce the query load
on the LDAP server.

domain = postfix.org, hash:/etc/postfix/searchdomains

It is best not to use LDAP to store the domains eligible for LDAP lookups.

NOTE: DO NOT define this parameter for local(8) aliases.

This feature is available in Postfix 1.0 and later.

result_attribute (default: maildrop)
The attribute(s) Postfix will read from any directory entries returned by the
lookup, to be resolved to an email address.

result_attribute = mailbox, maildrop

Don't rely on the default value ("maildrop"). Set the result_attribute explicitly
in all ldap table configuration files. This is particularly relevant when no
result_attribute is applicable, e.g. cases in which leaf_result_attribute and/or
terminal_result_attribute are used instead. The default value is harmless if
"maildrop" is also listed as a leaf or terminal result attribute, but it is best to
not leave this to chance.

special_result_attribute (default: empty)
The attribute(s) of directory entries that can contain DNs or RFC 2255 LDAP URLs.
If found, a recursive search is performed to retrieve the entry referenced by the
DN, or the entries matched by the URL query.

special_result_attribute = memberdn

DN recursion retrieves the same result_attributes as the main query, including the
special attributes for further recursion.

URL processing retrieves only those attributes that are included in both the URL
definition and as result attributes (ordinary, special, leaf or terminal) in the
Postfix table definition. If the URL lists any of the table's special result
attributes, these are retrieved and used recursively. A URL that does not specify
any attribute selection, is equivalent (RFC 2255) to a URL that selects all
attributes, in which case the selected attributes will be the full set of result
attributes in the Postfix table.

If an LDAP URL attribute-descriptor or the corresponding Postfix LDAP table result
attribute (but not both) uses RFC 2255 sub-type options ("attr;option"), the
attribute requested from the LDAP server will include the sub-type option. In all
other cases, the URL attribute and the table attribute must match exactly.
Attributes with options in both the URL and the Postfix table are requested only
when the options are identical. LDAP attribute-descriptor options are very rarely
used, most LDAP users will not need to concern themselves with this level of
nuanced detail.

terminal_result_attribute (default: empty)
When one or more terminal result attributes are found in an LDAP entry, all other
result attributes are ignored and only the terminal result attributes are returned.
This is useful for delegating expansion of group members to a particular host, by
using an optional "maildrop" attribute on selected groups to route the group to a
specific host, where the group is expanded, possibly via mailing-list manager or
other special processing.

result_attribute =
terminal_result_attribute = maildrop

When using terminal and/or leaf result attributes, the result_attribute is best set
to an empty value when it is not used, or else explicitly set to the desired value,
even if it is the default value "maildrop".

This feature is available with Postfix 2.4 or later.

leaf_result_attribute (default: empty)
When one or more special result attributes are found in a non-terminal (see above)
LDAP entry, leaf result attributes are excluded from the expansion of that entry.
This is useful when expanding groups and the desired mail address attribute(s) of
the member objects obtained via DN or URI recursion are also present in the group
object. To only return the attribute values from the leaf objects and not the
containing group, add the attribute to the leaf_result_attribute list, and not the
result_attribute list, which is always expanded. Note, the default value of
"result_attribute" is not empty, you may want to set it explicitly empty when using
"leaf_result_attribute" to expand the group to a list of member DN addresses. If
groups have both member DN references AND attributes that hold multiple string
valued rfc822 addresses, then the string attributes go in "result_attribute". The
attributes that represent the email addresses of objects referenced via a DN (or
LDAP URI) go in "leaf_result_attribute".

result_attribute = memberaddr
special_result_attribute = memberdn
terminal_result_attribute = maildrop
leaf_result_attribute = mail

This feature is available with Postfix 2.4 or later.

scope (default: sub)
The LDAP search scope: sub, base, or one. These translate into LDAP_SCOPE_SUBTREE,
LDAP_SCOPE_BASE, and LDAP_SCOPE_ONELEVEL.

bind (default: yes)
Whether or how to bind to the LDAP server. Newer LDAP implementations don't require
clients to bind, which saves time. Example:

# Don't bind
bind = no
# Use SIMPLE bind
bind = yes
# Use SASL bind
bind = sasl

Postfix versions prior to 2.8 only support "bind = no" which means don't bind, and
"bind = yes" which means do a SIMPLE bind. Postfix 2.8 and later also supports
"bind = SASL" when compiled with LDAP SASL support as described in LDAP_README, it
also adds the synonyms "bind = none" and "bind = simple" for "bind = no" and "bind
= yes" respectively. See the SASL section below for additional parameters available
with "bind = sasl".

If you do need to bind, you might consider configuring Postfix to connect to the
local machine on a port that's an SSL tunnel to your LDAP server. If your LDAP
server doesn't natively support SSL, put a tunnel (wrapper, proxy, whatever you
want to call it) on that system too. This should prevent the password from
traversing the network in the clear.

bind_dn (default: empty)
If you do have to bind, do it with this distinguished name. Example:

bind_dn = uid=postfix, dc=your, dc=com
With "bind = sasl" (see above) the DN may be optional for some SASL mechanisms,
don't specify a DN if not needed.

bind_pw (default: empty)
The password for the distinguished name above. If you have to use this, you
probably want to make the map configuration file readable only by the Postfix user.
When using the obsolete ldap:ldapsource syntax, with map parameters in main.cf, it
is not possible to securely store the bind password. This is because main.cf needs
to be world readable to allow local accounts to submit mail via the sendmail
command. Example:

bind_pw = postfixpw
With "bind = sasl" (see above) the password may be optional for some SASL
mechanisms, don't specify a password if not needed.

cache (IGNORED with a warning)

cache_expiry (IGNORED with a warning)

cache_size (IGNORED with a warning)
The above parameters are NO LONGER SUPPORTED by Postfix. Cache support has been
dropped from OpenLDAP as of release 2.1.13.

recursion_limit (default: 1000)
A limit on the nesting depth of DN and URL special result attribute evaluation. The
limit must be a non-zero positive number.

expansion_limit (default: 0)
A limit on the total number of result elements returned (as a comma separated list)
by a lookup against the map. A setting of zero disables the limit. Lookups fail
with a temporary error if the limit is exceeded. Setting the limit to 1 ensures
that lookups do not return multiple values.

size_limit (default: $expansion_limit)
A limit on the number of LDAP entries returned by any single LDAP search performed
as part of the lookup. A setting of 0 disables the limit. Expansion of DN and URL
references involves nested LDAP queries, each of which is separately subjected to
this limit.

Note: even a single LDAP entry can generate multiple lookup results, via multiple
result attributes and/or multi-valued result attributes. This limit caps the per
search resource utilization on the LDAP server, not the final multiplicity of the
lookup result. It is analogous to the "-z" option of "ldapsearch".

dereference (default: 0)
When to dereference LDAP aliases. (Note that this has nothing do with Postfix
aliases.) The permitted values are those legal for the OpenLDAP/UM LDAP
implementations:

0 never

1 when searching

2 when locating the base object for the search

3 always

See ldap.h or the ldap_open(3) or ldapsearch(1) man pages for more information. And
if you're using an LDAP package that has other possible values, please bring it to
the attention of the postfix-users@postfix.org mailing list.

chase_referrals (default: 0)
Sets (or clears) LDAP_OPT_REFERRALS (requires LDAP version 3 support).

version (default: 3)
Specifies the LDAP protocol version to use.

debuglevel (default: 0)
What level to set for debugging in the OpenLDAP libraries.

LDAP SASL PARAMETERS

If you're using the OpenLDAP libraries compiled with SASL support, Postfix 2.8 and later
built with LDAP SASL support as described in LDAP_README can authenticate to LDAP servers
via SASL.

This enables authentication to the LDAP server via mechanisms other than a simple
password. The added flexibility has a cost: it is no longer practical to set an explicit
timeout on the duration of an LDAP bind operation. Under adverse conditions, whether a
SASL bind times out, or if it does, the duration of the timeout is determined by the LDAP
and SASL libraries.

It is best to use tables that use SASL binds via proxymap(8), this way the requesting
process can time-out the proxymap request. This also lets you tailer the process
environment by overriding the proxymap(8) import_environment setting in master.cf(5).
Special environment settings may be needed to configure GSSAPI credential caches or other
SASL mechanism specific options. The GSSAPI credentials used for LDAP lookups may need to
be different than say those used for the Postfix SMTP client to authenticate to remote
servers.

Using SASL mechanisms requires LDAP protocol version 3, the default protocol version is 2
for backwards compatibility. You must set "version = 3" in addition to "bind = sasl".

The following parameters are relevant to using LDAP with SASL

sasl_mechs (default: empty)
Space separated list of SASL mechanism(s) to try.

sasl_realm (default: empty)
SASL Realm to use, if applicable.

sasl_authz_id (default: empty)
The SASL authorization identity to assert, if applicable.

sasl_minssf (default: 0)
The minimum required sasl security factor required to establish a connection.

LDAP SSL AND STARTTLS PARAMETERS

If you're using the OpenLDAP libraries compiled with SSL support, Postfix can connect to
LDAP SSL servers and can issue the STARTTLS command.

LDAP SSL service can be requested by using a LDAP SSL URL in the server_host parameter:

server_host = ldaps://ldap.example.com:636

STARTTLS can be turned on with the start_tls parameter:

start_tls = yes

Both forms require LDAP protocol version 3, which has to be set explicitly with:

version = 3

If any of the Postfix programs querying the map is configured in master.cf to run
chrooted, all the certificates and keys involved have to be copied to the chroot jail. Of
course, the private keys should only be readable by the user "postfix".

The following parameters are relevant to LDAP SSL and STARTTLS:

start_tls (default: no)
Whether or not to issue STARTTLS upon connection to the server. Don't set this
with LDAP SSL (the SSL session is setup automatically when the TCP connection is
opened).

tls_ca_cert_dir (No default; set either this or tls_ca_cert_file)
Directory containing X509 Certification Authority certificates in PEM format which
are to be recognized by the client in SSL/TLS connections. The files each contain
one CA certificate. The files are looked up by the CA subject name hash value,
which must hence be available. If more than one CA certificate with the same name
hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1
etc). The search is performed in the ordering of the extension number, regardless
of other properties of the certificates. Use the c_rehash utility (from the OpenSSL
distribution) to create the necessary links.

tls_ca_cert_file (No default; set either this or tls_ca_cert_dir)
File containing the X509 Certification Authority certificates in PEM format which
are to be recognized by the client in SSL/TLS connections. This setting takes
precedence over tls_ca_cert_dir.

tls_cert (No default; you must set this)
File containing client's X509 certificate to be used by the client in SSL/ TLS
connections.

tls_key (No default; you must set this)
File containing the private key corresponding to the above tls_cert.

tls_require_cert (default: no)
Whether or not to request server's X509 certificate and check its validity when
establishing SSL/TLS connections. The supported values are no and yes.

With no, the server certificate trust chain is not checked, but with OpenLDAP prior
to 2.1.13, the name in the server certificate must still match the LDAP server
name. With OpenLDAP 2.0.0 to 2.0.11 the server name is not necessarily what you
specified, rather it is determined (by reverse lookup) from the IP address of the
LDAP server connection. With OpenLDAP prior to 2.0.13, subjectAlternativeName
extensions in the LDAP server certificate are ignored: the server name must match
the subject CommonName. The no setting corresponds to the never value of
TLS_REQCERT in LDAP client configuration files.

Don't use TLS with OpenLDAP 2.0.x (and especially with x <= 11) if you can avoid
it.

With yes, the server certificate must be issued by a trusted CA, and not be
expired. The LDAP server name must match one of the name(s) found in the
certificate (see above for OpenLDAP library version dependent behavior). The yes
setting corresponds to the demand value of TLS_REQCERT in LDAP client configuration
files.

The "try" and "allow" values of TLS_REQCERT have no equivalents here. They are not
available with OpenLDAP 2.0, and in any case have questionable security properties.
Either you want TLS verified LDAP connections, or you don't.

The yes value only works correctly with Postfix 2.5 and later, or with OpenLDAP
2.0. Earlier Postfix releases or later OpenLDAP releases don't work together with
this setting. Support for LDAP over TLS was added to Postfix based on the OpenLDAP
2.0 API.

tls_random_file (No default)
Path of a file to obtain random bits from when /dev/[u]random is not available, to
be used by the client in SSL/TLS connections.

tls_cipher_suite (No default)
Cipher suite to use in SSL/TLS negotiations.

EXAMPLE

       Here's  a  basic  example  for  using  LDAP  to  look up local(8) aliases.  Assume that in
       main.cf, you have:

           alias_maps = hash:/etc/aliases,
                   ldap:/etc/postfix/ldap-aliases.cf

       and in ldap:/etc/postfix/ldap-aliases.cf you have:

           server_host = ldap.example.com
           search_base = dc=example, dc=com

       Upon receiving mail for a local address "ldapuser" that isn't found  in  the  /etc/aliases
       database,  Postfix  will search the LDAP server listening at port 389 on ldap.example.com.
       It will bind anonymously, search for any directory  entries  whose  mailacceptinggeneralid
       attribute  is  "ldapuser", read the "maildrop" attributes of those found, and build a list
       of their maildrops, which will be treated as RFC822 addresses to which the message will be
       delivered.

OBSOLETE MAIN.CF PARAMETERS

       For backwards compatibility with Postfix version 2.0 and earlier, LDAP parameters can also
       be defined in main.cf.  Specify as LDAP source a name that doesn't begin with a slash or a
       dot.   The  LDAP parameters will then be accessible as the name you've given the source in
       its definition, an underscore, and the name of the parameter.  For example, if the map  is
       specified  as  "ldap:ldapsource",  the  "server_host"  parameter below would be defined in
       main.cf as "ldapsource_server_host".

       Note: with this form, the passwords for the LDAP sources are written in main.cf, which  is
       normally  world-readable.   Support  for  this  form  will  be removed in a future Postfix
       version.

OTHER OBSOLETE FEATURES

       For backwards compatibility with the pre 2.2 LDAP clients, result_filter can  for  now  be
       used  instead  of  result_format, when the latter parameter is not also set.  The new name
       better reflects the function of the parameter. This compatibility interface may be removed
       in a future release.

README FILES

       Use "postconf readme_directory" or "postconf html_directory" to locate this information.
       DATABASE_README, Postfix lookup table overview
       LDAP_README, Postfix LDAP client guide

LICENSE

       The Secure Mailer license must be distributed with this software.

AUTHOR(S)

       Carsten  Hoeger,  Hery  Rakotoarisoa,  John  Hensley, Keith Stevenson, LaMont Jones, Liviu
       Daia, Manuel Guesdon, Mike Mattice, Prabhat  K  Singh,  Sami  Haahtinen,  Samuel  Tardieu,
       Victor Duchovni, and many others.

                                                                                    LDAP_TABLE(5)