Provided by: gpm_1.20.7-10build1_amd64 
NAME
gpm - a cut and paste utility and mouse server for virtual consoles
SYNOPSIS
gpm [ options ]
DESCRIPTION
This package tries to be a useful mouse server for applications running on the Linux
console. It is based on the "selection" package, and some of its code comes from
selection itself. This package is intended as a replacement for "selection" as a cut-and-
paste mechanism; it also provides additional facilities. The "selection" package offered
the first cut-and-paste implementation for Linux using two mouse buttons, and the cut
buffer is still called "selection buffer" or just "selection" throughout this document.
The information below is extracted from the texinfo file, which is the preferred source of
information.
The `gpm' executable is meant to act like a daemon (thus, `gpmd' would be a better name
for it). This section is meant to describe the command-line options for `gpm', while its
internals are outlined in the next section.
Due to restrictions in the `ioctl(TIOCLINUX)' system call, `gpm' must be run by the
superuser. The restrictions have been added in the last 1.1 kernels to fix a security hole
related to selection and screen dumping.
The server can be configured to match the user's taste, and any application using the
mouse will inherit the server's attitude. From release 1.02 up to 1.19.2 is was possible
for any user logged on the system console to change the mouse feeling using the -q option.
This is no longer possible for security reasons.
As of 0.97 the server program puts itself in the background. To kill `gpm' you can just
reinvoke it with the `-k' cmdline switch, although `killall gpm' can be a better choice.
SPECIAL COMMANDS
Version 1.10 adds the capability to execute special commands on certain circumstances.
Special commands default to rebooting and halting the system, but the user can specify
his/her personal choice. The capability to invoke commands using the mouse is a handy one
for programmers, because it allows to issue a clean shutdown when the keyboard is locked
and no network is available to restore the system to a sane state.
Special commands are toggled by triple-clicking the left and right button -- an unlikely
event during normal mouse usage. The easiest way to triple-click is pressing one of the
buttons and triple-click the other one. When special processing is toggled, a message
appears on the console (and the speaker beeps twice, if you have a speaker); if the user
releases all the buttons and presses one of them again within three seconds, then the
special command corresponding to the button is executed.
The default special commands are:
left button
Reboot the system by signalling the init process
middle button (if any)
Execute `/sbin/shutdown -h now'
right button
Execute `/sbin/shutdown -r now'
The `-S' command line switch enables special command processing and allows to change the
three special commands. To accept the default commands use `-S ""' (i.e., specify an empty
argument). To specify your own commands, use a colon-separated list to specify commands
associated to the left, middle and right button. If any of the commands is empty, it is
interpreted as `send a signal to the init process'. This particular operation is
supported, in addition to executing external commands, because sometimes bad bugs put the
system to the impossibility to fork; in these rare case the programmer should be able to
shutdown the system anyways, and killing init from a running process is the only way to do
it.
As an example, `-S ":telinit 1:/sbin/halt"', associates killing init to the left button,
going single user to the middle one, and halting the system to the right button.
System administrators should obviously be careful about special commands, as gpm runs with
superuser permissions. Special commands are best suited for computers whose mouse can be
physically accessed only by trusted people.
COMMAND LINE OPTIONS
Available command line options are the following:
-a accel
Set the acceleration value used when a single motion event is longer than delta
(see `-d').
-A[limit]
Start up with selection pasting disabled. This is intended as a security measure;
a plausible attack on a system seems to be to stuff a nasty shell command into the
selection buffer (`rm -rf /') including the terminating line break, then all the
victim has to do is click the middle mouse button .. As of version 1.17.2, this
has developed into a more general aging mechanism; the gpm daemon can disable (age)
selection pasting automatically after a period of inactivity. To enable this mode
just give the optional limit parameter (no space in between !) which is
interpreted as the time in seconds for which a selection is considered valid and
pastable. As of version 1.15.7, a trivial program called `disable-paste' is
provided. The following makes a good addition to `/etc/profile' if you allow
multiple users to work on your console.
`case $( /usr/bin/tty ) in
/dev/tty[0-9]*) /usr/bin/disable-paste ;;
esac'
-b baud
Set the baud rate.
-B sequence
Set the button sequence. `123' is the normal sequence, `321' can be used by left-
handed people, and `132' can be useful with two-button mice (especially within
Emacs). All the button permutations are allowable.
-d delta
Set the delta value. When a single motion event is longer than delta, accel is used
as a multiplying factor. (Must be 2 or above)
-D Do not automatically enter background operation when started, and log messages to
the standard error stream, not the syslog mechanism. This is useful for debugging;
in previous releases it was done with a compile-time option.
-g number
With glidepoint devices, emulate the specified button with tapping. number must be
`1', `2', or `3', and refers to the button number before the `-B' button remapping
is performed. This option applies to the mman and ps2 decoding. No button is
emulated by default because the ps2 tapping is incompatible with some normal ps2
mice
-h Print a summary of command line options.
-i interval
Set interval to be used as an upper time limit for multiple clicks. If the interval
between button-up and button-down events is less than limit, the press is
considered a double or triple click. Time is in milliseconds.
-k Kill a running gpm. This can be used by busmouse users to kill gpm before running X
(unless they use `-R' or the single-open limitation is removed from the kernel).
-l charset
Choose the `inword()' look up table. The charset argument is a list of characters.
`-' is used to specify a range and `\ ' is used to escape the next character or to
provide octal codes. Only visible character can appear in charset because control
characters can't appear in text-mode video memory, whence selection is cut.
-m filename
Choose the mouse file to open. Must be before -t and -o.
-M Enable multiple mode. The daemon will read two different mouse devices. Any
subsequent option will refer to the second device, while any preceding option will
be used for the first device. This option automatically forces the repeater (`-R')
option on.
-o list-of-extra-options
The option works similarly to the ``-o'' option of mount; it is used to specify a
list of ``extra options'' that are specific to each mouse type. The list is comma-
separated. The options `dtr', `rts' or `both' are used by the serial initialization
to toggle the modem lines like, compatibly with earlier gpm versions; note however
that using -o dtr associated with non-plain-serial mouse types may now generate an
error. And by the way, use -o after -m and after -t.
-p Forces the pointer to be visible while selecting. This is the behaviour of
`selection-1.7', but it is sometimes confusing. The default is not to show the
pointer, which can be confusing as well.
-r number
Set the responsiveness as a percentage of motion (1 to 100, default 10). A lower
number can be used to slow down cursor motion, this can not be used to make a mouse
move faster, see `-a'.
-R[name]
Causes `gpm' to act as a repeater: any mouse data received while in graphic mode
will be produced on the fifo `/dev/gpmdata' in protocol name, given as an optional
argument (no space in between !). In principle, you can use the same names as for
the `-t' option, although repeating into some protocols may not be implemented for
a while. In addition, you can specify `raw' as the name, to repeat the mouse data
byte by byte, without any protocol translation. If name is omitted, it defaults to
`msc'. Using gpm in repeater mode, you can configure the X server to use its fifo
as a mouse device. This option is useful for bus-mouse owners to override the
single-open limitation. It is also an easy way to manage those stupid dual-mode
mice which force you to keep the middle button down while changing video mode. The
option is forced on by the `-M' option.
-s number
Set the sample rate for the mouse device.
-S commands
Enable special-command processing, and optionally specify custom commands as a
colon-separated list. See above for a detailed description of special commands.
-t name
Set the mouse type. Use `-t help' to get a list of allowable types. Use -t after
you selected the mouse device with -m.
-v Print version information and exit.
-2 Force two buttons. This means that the middle button, if any, will be taken as it
was the right one.
-3 Force three buttons. By default the mouse is considered to be a 2-buttons one,
until the middle button is pressed. If three buttons are there, the right one is
used to extend the selection, and the middle one is used to paste it. Beware: if
you use the `-3' option with a 2-buttons mouse, you won't be able to paste the
selection.
OPERATION
To select text press the left mouse button and drag the mouse. To paste text in the same
or another console, press the middle button. The right button is used to extend the
selection, like in `xterm'.
Two-button mice use the right button to paste text.
Double and triple clicks select whole word and whole lines. Use of the `-p' option is
recommended for best visual feedback.
If a trailing space after the contents of a line is highlighted, and if there is no other
text on the remainder of the line, the rest of the line will be selected automatically. If
a number of lines are selected, highlighted trailing spaces on each line will be removed
from the selection buffer.
Any output on the virtual console holding the selection will clear the highlighted
selection from the screen, to maintain integrity of the display, although the contents of
the paste buffer will be unaffected.
The selection mechanism is disabled if the controlling virtual console is placed in
graphics mode, for example when running X11, and is re-enabled when text mode is resumed.
(But see BUGS section below.)
BUGS
The `gpm' server may have problems interacting with X: if your mouse is a single-open
device (i.e. a bus mouse), you should kill `gpm' before starting X, or use the `-R' option
(see above). To kill `gpm' just invoke `gpm -k'. This problem doesn't apply to serial
mice.
Two instances of gpm can't run on the same system. If you have two mice use the `-M'
option (see above).
While the current console is in graphic mode, `gpm' sleeps until text mode is back (unless
`-R' is used). Thus, it won't reply to clients. Anyways, it is unlikely that mouse-eager
clients will spur out in hidden consoles.
The clients shipped out with gpm are not updated, thus there are potential security risks
when using them.
AUTHORS
Andrew Haylett <ajh@gec-mrc.co.uk> (the original selection code)
Ian Zimmerman <itz@speakeasy.org> (old maintainer)
Alessandro Rubini <rubini@linux.it> (old maintainer (still helps a lot))
Nico Schottelius <nico@schottelius.org> (maintainer)
Many many contributors, to both selection and gpm.
MAINTAINERS
The current maintainer is Nico Schottelius. But without the help of Alessandro Rubini and
the mailing list it would be impossible for me to maintain gpm. The development mailing
list can be reached under gpm@lists.linux.it. More information on the list is in the
README file part of the source distribution of gpm.
FILES
/var/run/gpm.pid The PID of the running gpm
/dev/gpmctl A control socket for clients
/dev/gpmdata The fifo written to by a repeater (`-R') daemon.
SEE ALSO
gpm-types(7) Description of current pointer types supported by gpm
The info file about `gpm', which gives more complete information and explains how to write
a gpm client.