Provided by: dbus-broker_33-1_amd64 bug

NAME

       dbus-broker - D-Bus message broker

SYNOPSIS

       dbus-broker [ OPTIONS ]
       dbus-broker --version
       dbus-broker --help

DESCRIPTION

       dbus-broker is an implementation of the D-Bus Message Bus Specification [1]. Each instance
       provides a single, unique message bus that clients can connect to, and send messages over.
       The  broker  takes  care  of  message  mediation,  access  control, subscriptions, and bus
       control, according to the D-Bus specification.

       dbus-broker is a  pure  implementation,  meaning  that  it  only  implements  the  message
       mediation.  It  needs  a  controlling process that performs the bus setup and all external
       communication. dbus-broker-launch(1) is such a controller aiming at perfect  compatibility
       to  dbus-daemon(1),  the  D-Bus  Reference  Implementation.  See dbus-broker-launch(1) for
       details how to spawn a message bus.

       This man-page documents the  interface  between  dbus-broker  and  its  controller  (e.g.,
       dbus-broker-launch(1)).

OPTIONS

       The  following  command-line  options  are supported. If an option is passed, which is not
       listed here, the broker will deny startup and exit with an error.

       -h, --help
              print usage information and exit immediately

       --version
              print build-version and exit immediately

       --audit
              enable logging to the linux  audit  subsystem  (no-op  if  audit  support  was  not
              compiled in; Default: off)

       --controller=FD
              use  the  inherited file-descriptor with the given number as the controlling socket
              (see CONTROLLER section; this option is mandatory)

       --log FD
              use the inherited file-descriptor with the given number to access  the  system  log
              (see LOGGING section; Default: no logging)

       --machine-id=ID
              set  the  machine-id  to  be  advertised by the broker via the org.freedesktop.DBus
              interface (this option is mandatory and usually sourced from /etc/machine-id)

       --max-bytes=BYTES
              maximum number of bytes each user may allocate in the broker (Default: 16 MiB)

       --max-fds=FDS
              maximum number of file descriptors each user may allocate in the  broker  (Default:
              64)

       --max-matches=MATCHES
              maximum number of match rules each user may allocate in the broker (Default: 16k)

       --max-objects=OBJECTS
              maximum  total  number of names, peers, pending replies, etc each user may allocate
              in the broker (Default: 16k)

CONTROLLER

       Every instance of dbus-broker inherits a unix(7) socket  from  its  parent  process.  This
       socket  must  be  specified  via  the  --controller option. The broker uses this socket to
       accept control commands from its parent process (or from whomever owns the other  side  of
       this socket, also called The Controller). This socket uses normal D-Bus P2P communication.
       The interfaces provided on this socket are described in the API section.

       By default, a broker instance is idle. That is, after forking and executing a  broker,  it
       starts  with  an  empty  list  of  bus-sockets to manage, as well as no way for clients to
       connect to it. The controller  must  use  the  controller  interface  to  create  listener
       sockets, specify the bus policy, create activatable names, and react to bus events.

       The  dbus-broker  process never accesses any external resources other than those passed in
       either via the command-line or the controller interfaces. That is, no file-system  access,
       no  nss(5)  calls,  no  external process communication, is performed by the broker. On the
       contrary, the broker never accesses any resources but the sockets provided to  it  by  the
       controller.  This is guaranteed by the implementation. At the same time, this implies that
       the controller is required to perform all external resource acquisitions and communication
       on behalf of the broker (in case this is needed).

LOGGING

       If  a  logging  FD is provided via the --log command-line option, the broker will log some
       information through this FD. Two different log-types are supported:

          1. If the FD is a unix(7) SOCK_STREAM socket, information is logged  as  human-readable
             line-based chunks.

          2. If  the  FD is a unix(7) SOCK_DGRAM socket, information is logged as key/value based
             annotated data  blocks.  The  format  is  compatible  to  the  format  used  by  the
             systemd-journal  (though  it  is  not  dependent  on systemd).  This key/value based
             logging is a lot more verbose as the stream based logging.  A  lot  of  metadata  is
             provided as separate keys, allowing precise tracing and interpretation of the logged
             data.

       The broker has strict rules when it logs data. It logs during startup  and  shutdown,  one
       message  each to provide information on its setup and environment.  At runtime, the broker
       only ever logs in unexpected situations. That is, every message the broker logs at runtime
       was  triggered  by  a  malfunctioning  client.  If a system is properly set up, no runtime
       log-message will be triggered.

       The situations where the broker logs are:

          1. During startup and shutdown, the broker submits a short message  including  metadata
             about its controller, environment, and setup.

          2. Whenever a client-request is denied by the policy, a message is logged including the
             affected client and policies.

          3. Whenever a client exceeds its resource quota, a message is logged  with  information
             on the client.

API

       The  following  interfaces  are  implemented  by  the broker on the respective nodes.  The
       controller is free to call these at any time.  The  controller  connection  is  considered
       trusted. No resource accounting, nor access control is performed.

       The  controller  itself is also required to implement interfaces to be used by the broker.
       See the section below for a list of interfaces on the controller.

       node /org/bus1/DBus/Broker {
         interface org.bus1.DBus.Broker {

           # Create new activatable name @name, accounted on user @uid. The name
           # will be exposed by the controller as @path (which must fit the
           # template /org/bus1/DBus/Name/%).
           method AddName(o path, s name, u uid) -> ()

           # Add a listener socket to this bus. The listener socket must be
           # ready in listening mode and specified as @socket. As soon as this
           # call returns, incoming client connection attempts will be served
           # on this socket.
           # The listener is exposed by the controller as @path (which must fit
           # the template /org/bus1/DBus/Listener/%).
           # The policy for all clients connecting through this socket is
           # provided as @policy. See org.bus1.DBus.Listener.SetPolicy() for
           # details.
           method AddListener(o path, h socket, v policy) -> ()

           # This signal is raised according to client-requests of
           # org.freedesktop.DBus.UpdateActivationEnvironment().
           signal SetActivationEnvironment(a{ss} environment)

         }
       }

       node /org/bus1/DBus/Listener/% {
         interface org.bus1.DBus.Listener {

           # Release this listener. It will immediately be removed by the broker
           # and no more connections will be served on it. All clients connected
           # through this listener are forcefully disconnected.
           method Release() -> ()

           # Change the policy on this listener socket to @policy. The syntax of
           # the policy is still subject to change and not stable, yet.
           method SetPolicy(v policy) -> ()

         }
       }

       node /org/bus1/DBus/Name/% {
         interface org.bus1.DBus.Name {

           # Release this activatable name. It will be removed with immediate
           # effect by the broker. Note that the name is still valid to be
           # acquired by clients, though no activation-features will be
           # supported on this name.
           method Release() -> ()

           # Reset the activation state of this name. Any pending activation
           # requests are cancelled. The call requires a serial number to be
           # passed along. This must be the serial number received by the last
           # activation event on this name. Calls for other serial numbers are
           # silently ignored and considered stale.
           # A org.bus1.DBus.Name.Error string is also passed, giving a hint
           # about the reason the activation was reset. The list is defined below.
           method Reset(t serial, s error) -> ()

           # Activation request failed: a concurrent deactivation request is already in progress
           error org.bus1.DBus.Name.Error.DestructiveTransaction
           # Activation request failed: unknown unit
           error org.bus1.DBus.Name.Error.UnknownUnit
           # Activation request failed: unit is masked
           error org.bus1.DBus.Name.Error.MaskedUnit
           # Activation request failed: unit is invalid
           error org.bus1.DBus.Name.Error.InvalidUnit
           # Unit activation job succeeded, but the unit failed afterwards
           error org.bus1.DBus.Name.Error.UnitFailure
           # The startup job was valid, but it failed during activation
           error org.bus1.DBus.Name.Error.StartupFailure
           # The startup job was valid, but it was skipped during activation
           error org.bus1.DBus.Name.Error.StartupSkipped
           # Activation request cancelled: bus name was released
           error org.bus1.DBus.Name.Error.NameReleased

           # This signal is sent whenever a client requests activation of this
           # name. Note that multiple activation requests are coalesced by the
           # broker. The controller can cancel outstanding requests via the
           # Reset() method.
           # The broker sends a serial number with the event. This number
           # represents the activation request and must be used when reacting
           # to the request with methods like Reset(). The serial number is
           # unique for each event, and is never reused. A serial number of 0
           # is never sent and considered invalid.
           signal Activate(t serial)

         }
       }

       The controller itself is required to implement  the  following  interfaces  on  the  given
       nodes.  These  interfaces  are  called  by  the  broker  to  implement  some  parts of the
       driver-interface as defined by the D-Bus specification.

       Note that all method-calls performed by the broker are always fully asynchronous. That is,
       regardless  how  long it takes to serve the request, the broker is still fully operational
       and might even send further requests to the controller.

       A controller is free to implement these calls in a blocking fashion. However, it is up  to
       the  controller  to make sure not to perform blocking recursive calls back into the broker
       (via any means).

       node /org/bus1/DBus/Controller {
         interface org.bus1.DBus.Controller {

           # This function is called for each client-request of
           # org.freedesktop.DBus.ReloadConfig().
           method ReloadConfig() -> ()

         }
       }

SEE ALSO

       dbus-broker-launch(1) dbus-daemon(1)

NOTES

       [1]  D-Bus Specification: https://dbus.freedesktop.org/doc/dbus-specification.html

                                                                                   DBUS-BROKER(1)