Provided by: ipv6toolkit_2.0+ds.1-2_amd64 bug

NAME

       flow6 - A security assessment tool for the IPv6 Flow Label field

SYNOPSIS

       flow6 [-i INTERFACE] -d DST_ADDR [-S LINK_SRC_ADDR] [-D LINK_DST_ADDR] [-s SRC_ADDR[/LEN]]
       [-A HOP_LIMIT] [-P PROTOCOL] [-p PORT] [-W] [-v] [-h]

DESCRIPTION

       flow6 performs a security assessment of the Flow Label generation policy of a target node.
       It  is  part  of  the SI6 Networks' IPv6 Toolkit: a security assessment suite for the IPv6
       protocols.

       flow6 sends a number of probe packets to the target  node,  and  samples  the  Flow  Label
       values  of  the  corresponding  response packets. Based on the sampled values, it tries to
       infer the Flow Label generation policy of the target.

       The tool will first send a number of probe packets from single IPv6 address, such that the
       per-destination  policy  is  determined. The tool will then send probe packets from random
       IPv6 addresses (from the same prefix as the first probes)  such  that  the  "global"  Flow
       Label generation policy can be determined.

       The  tool computes the expected value and the standard deviation of the difference between
       consecutive-sampled Flow Label values (Labeln - Labeln-1) with the intent of inferring the
       Flow Label generation algorithm of the target node.

       If the standard deviation of [Labeln - Labeln-1] is 0, the Flow Label is assumed to be set
       to a constant value, and the corresponding value is informed to the user. For small values
       of  the  standard  deviation,  the  Flow Label is assumed to be a monotonically-increasing
       function with increments of the "expected value", and such "expected value" together  with
       the  standard  deviation,  are  informed  to  the  user.  For large values of the standard
       deviation, the Flow Label is assumed to be randomized, and the expected value and standard
       deviation  are  informed  to  the  user,  as indicators of the "quality" of the Flow Label
       generation algorithm.

OPTIONS

       flow6 takes it parameters as command-line options. Each of the options  can  be  specified
       with a short name (one character preceded with the hyphen character, as e.g. "-i") or with
       a long name (a string preceded with two hyphen characters, as e.g. "--interface").

       -i INTERFACE, --interface INTERFACE
              This option specifies the  network  interface  that  the  tool  will  use.  If  the
              destination  address  ("-d"  option) is a link-local address, the interface must be
              explicitly specified. The interface may also be specified alon with  a  destination
              address, with the "-d" option.

       -s SRC_ADDR, --src-address SRC_ADDR

              This  option  specifies the IPv6 source address (or IPv6 prefix) to be used for the
              Source Address of the probe packets. If an  IPv6  prefix  is  specified,  the  IPv6
              Source Address of the ICMPv6 packets will be randomized from that prefix.

       -d DST_ADDR, --dst-address DST_ADDR

              This  option specifies the IPv6 Destination Address of the target node. This option
              cannot be left unspecified.

       -A HOP_LIMIT, --hop-limit HOP_LIMIT

              This option specifies the Hop Limit to be used for the IPv6  packets.  By  default,
              the Hop Limit is randomized.

       -S SRC_LINK_ADDR, --src-link-address SRC_LINK_ADDR

              This   option  specifies  the  link-layer  Source  Address  of  the  probe  packets
              (currently, only Ethernet is supported). If left unspecified, the link-layer Source
              Address  of  the  packets  is  set  to  the  real link-layer address of the network
              interface.

       -D DST_LINK_ADDR, --dst-link-address DST_LINK_ADDR

              This option specifies the link-layer  Destination  Address  of  the  probe  packets
              (currently,  only  Ethernet  is  supported). By default, the link-layer Destination
              Address is automatically set to the link-layer address of the destination host (for
              on-link destinations) or to the link-layer address of the first-hop router.

       -P PROTOCOL, --protocol PROTOCOL

              This option specifies the protocol type of the probe packets. Currently, both "UDP"
              and "TCP" are supported. If this option is  left  unspecified,  the  protocol  type
              defaults to "TCP".

       -p PORT, --dst-port PORT

              This  option  specifies  the  Destination  Port  of  the  probe  packets.  If  left
              unspecified, the Destination Port defaults to "80" when the IPv6  payload  is  TCP,
              and to 53 if the IPv6 payload is UDP.

              Note:  Since  it  is  vital  for the tool to receive response packets to be able to
              infer the Flow Label algorithm of the target, the  protocol  type  and  Destination
              Port should be carefully selected (i.e., the corresponding protocol and Destination
              Port should not be filter, and the target should respond to packets  sent  to  that
              protocol/port).

       -W, --flow-label-policy
              This option instructs the tool to determine the Flow Label generation policy. As of
              this version of the tool, this option must be specified.

       -v, --verbose

              This option instructs the flow6 tool to be verbose.  If this option is  set  twice,
              the  tool is "very verbose", and outputs the sampled Flow Label values (in addition
              to other information).

       -h, --help

              Print help information for the flow6 tool.

EXAMPLES

       The following sections illustrate typical use cases of the flow6 tool.

       Example #1

       # flow6 -i eth0 --flow-label-policy -d fe80::1 -v

       Assess the Flow Label generation policy of the host "fe80::1", using the network interface
       "eth0".  Probe packets are TCP segments directed to port 80 (default). Be verbose. In this
       example, since the IPv6 destination address is a link-local address, the network interface
       ccard must be explicitly specified.

       Example #2

       # flow6 -d 2001:db8::1 --flow-label-policy -P TCP -p 22 -vv

       Assess  the  Flow Label generation policy of the host "2001:db8::1". Probe packets are TCP
       segments directed to port 22. Be very verbose (i.e., list the sampled Flow Label values).

AUTHOR

       The flow6 tool  and  the  corresponding  manual  pages  were  produced  by  Fernando  Gont
       <fgont@si6networks.com> for SI6 Networks <http://www.si6networks.com>.

COPYRIGHT

       Copyright (c) 2011-2013 Fernando Gont.

       Permission  is  granted to copy, distribute and/or modify this document under the terms of
       the GNU Free Documentation License, Version 1.3 or any later version published by the Free
       Software  Foundation;  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is available at <http://www.gnu.org/licenses/fdl.html>.

                                                                                         FLOW6(1)