Provided by: inotify-tools_3.22.6.0-4_amd64 bug

NAME

       inotifywait, fsnotifywait - wait for changes to files using inotify or fanotify

SYNOPSIS

       inotifywait  [-hcmrPq]  [-e <event> ] [-t <seconds> ] [--format <fmt> ] [--timefmt <fmt> ]
       <file> [ ... ]

       fsnotifywait [-hcmrPqIFS] [-e <event> ] [-t <seconds> ] [--format <fmt> ] [--timefmt <fmt>
       ] <file> [ ... ]

DESCRIPTION

       inotifywait efficiently waits for changes to files using Linux's inotify(7) interface.  It
       is suitable for waiting for changes to files from shell scripts.  It can either exit  once
       an event occurs, or continually execute and output events as they occur.

       fsnotifywait  is  similar  to inotifywait but it is using Linux's fanotify(7) interface by
       default. If explicitly specified, it uses the inotify(7) interface.

OUTPUT

       inotifywait and fsnotifywait will output diagnostic  information  on  standard  error  and
       event  information on standard output.  The event output can be configured, but by default
       it consists of lines of the following form:

       watched_filename EVENT_NAMES event_filename

       watched_filename
              is the name of the file on which the event occurred.  If the file is a directory, a
              trailing slash is output.

       EVENT_NAMES
              are the names of the inotify events which occurred, separated by commas.

       event_filename
              is output only when the event occurred on a directory, and in this case the name of
              the file within the directory which caused this event is output.

              By default, any special characters in filenames are not escaped in any  way.   This
              can  make  the  output of inotifywait difficult to parse in awk scripts or similar.
              The --csv and --format options will be helpful in this case.

OPTIONS

       -h, --help
              Output some helpful usage information.

       @<file>
              When watching a directory tree recursively, exclude the specified file  from  being
              watched.   The file must be specified with a relative or absolute path according to
              whether a relative or absolute  path  is  given  for  watched  directories.   If  a
              specific path is explicitly both included and excluded, it will always be watched.

              Note:  If  you need to watch a directory or file whose name starts with @, give the
              absolute path.

       --fromfile <file>
              Read filenames to watch or  exclude  from  a  file,  one  filename  per  line.   If
              filenames  begin  with  @  they are excluded as described above.  If <file> is `-',
              filenames are read from standard input.  Use this option if you need to  watch  too
              many files to pass in as command line arguments.

       -m, --monitor
              Instead  of  exiting  after  receiving  a  single event, execute indefinitely.  The
              default behaviour is to exit after the first event occurs.

       -d, --daemon
              Same as --monitor, except run in the background logging events to a file that  must
              be specified by --outfile. Implies --syslog.

       -o, --outfile <file>
              Output events to <file> rather than stdout.

       -s, --syslog
              Output errors to syslog(3) system log module rather than stderr.

       -P, --no-dereference
              Do not follow symlinks.

       -r, --recursive
              Watch  all  subdirectories of any directories passed as arguments.  Watches will be
              set up recursively to an unlimited depth.  Symbolic links are not traversed.  Newly
              created subdirectories will also be watched.

              Warning:  If you use this option while watching the root directory of a large tree,
              it may take quite a while until all inotify watches  are  established,  and  events
              will  not  be  received  in  this  time.   Also,  since  one  inotify watch will be
              established per subdirectory, it is possible that the  maximum  amount  of  inotify
              watches per user will be reached.  The default maximum is 8192; it can be increased
              by writing to /proc/sys/fs/inotify/max_user_watches.

       -q, --quiet
              If specified once, the program will be less verbose.   Specifically,  it  will  not
              state when it has completed establishing all inotify watches.

              If  specified  twice, the program will output nothing at all, except in the case of
              fatal errors.

       --exclude <pattern>
              Do not process any events for  the  subset  of  files  whose  filenames  match  the
              specified POSIX regular expression, case sensitive.

       --excludei <pattern>
              Do  not  process  any  events  for  the  subset  of files whose filenames match the
              specified POSIX regular expression, case insensitive.

       --include <pattern>
              Process events only for the subset of files whose  filenames  match  the  specified
              POSIX regular expression, case sensitive.

       --includei <pattern>
              Process  events  only  for  the subset of files whose filenames match the specified
              POSIX regular expression, case insensitive.

       -t <seconds>, --timeout <seconds>
              Exit if an  appropriate  event  has  not  occurred  within  <seconds>  seconds.  If
              <seconds> is zero (the default), wait indefinitely for an event.

       -e <event>, --event <event>
              Listen for specific event(s) only.  The events which can be listened for are listed
              in the EVENTS section.  This option can be specified more than once.   If  omitted,
              all events are listened for.

       -c, --csv
              Output  in  CSV (comma-separated values) format.  This is useful when filenames may
              contain spaces, since in this case it is not safe to simply  split  the  output  at
              each space character.

       --timefmt <fmt>
              Set  a  time  format  string  as  accepted  by  strftime(3)  for  use with the `%T'
              conversion in the --format option.

       --no-newline
              Don't print newline symbol after user-specified format in the --format option.

       --format <fmt>
              Output in a user-specified format, using printf-like  syntax.   The  event  strings
              output  are limited to around 4000 characters and will be truncated to this length.
              The following conversions are supported:

       %w     This will be replaced with the name of the Watched file on which an event occurred.
              When  an  event  occurs  within a Watched directory or when watching with fanotify,
              this will be replaced with the name of the Directory in which the event occurred.

       %f     When an event occurs within a Watched directory or  when  watching  with  fanotify,
              this  will  be  replaced with the name of the File which caused the event to occur.
              Otherwise, this will be replaced with an empty string.

       %e     Replaced with the Event(s) which occurred, comma-separated.

       %Xe    Replaced with the Event(s) which occurred, separated by whichever character  is  in
              the place of `X'.

       %T     Replaced  with  the  current  Time in the format specified by the --timefmt option,
              which should be a format string suitable for passing to strftime(3).

       %0     Replaced with NUL.

       %n     Replaced with Line Feed.

   fsnotifywait
       The following additional options are available:

       -I, --inotify
              Watch using inotify.

       -F, --fanotify
              Watch using fanotify (default).  fanotify support for reporting events with inotify
              compatible  information  was  added in kernel v5.9.  With older kernels the command
              will fail.  As of kernel v5.12, fanotify requires admin privileges.

       -S, --filesystem
              Watch entire filesystem of any directories passed as arguments using fanotify.

EXIT STATUS

       0      The program executed successfully, and an event occurred which was  being  listened
              for.

       1      An  error  occurred in execution of the program, or an event occurred which was not
              being listened for.   The  latter  generally  occurs  if  something  happens  which
              forcibly  removes  the  inotify  watch, such as a watched file being deleted or the
              filesystem containing a watched file being unmounted.

       2      The -t option was used and an event did not occur  in  the  specified  interval  of
              time.

EVENTS

       The following events are valid for use with the -e option:

       access A watched file or a file within a watched directory was read from.

       modify A watched file or a file within a watched directory was written to.

       attrib The  metadata  of a watched file or a file within a watched directory was modified.
              This includes timestamps, file permissions, extended attributes etc.

       close_write
              A watched file or a file within a watched directory was closed, after being  opened
              in writable mode.  This does not necessarily imply the file was written to.

       close_nowrite
              A  watched file or a file within a watched directory was closed, after being opened
              in read-only mode.

       close  A watched file or a file within a watched directory was closed, regardless  of  how
              it was opened.  Note that this is actually implemented simply by listening for both
              close_write and close_nowrite, hence all close events received will  be  output  as
              one of these, not CLOSE.

       open   A watched file or a file within a watched directory was opened.

       moved_to
              A  file or directory was moved into a watched directory.  This event occurs even if
              the file is simply moved from and to the same directory.

       moved_from
              A file or directory was moved from a watched directory.  This event occurs even  if
              the file is simply moved from and to the same directory.

       move   A  file  or  directory was moved from or to a watched directory.  Note that this is
              actually implemented simply by listening for both moved_to  and  moved_from,  hence
              all move events received will be output as one or both of these, not MOVE.

       move_self
              A  watched  file or directory was moved. After this event, the file or directory is
              no longer being watched.

       create A file or directory was created within a watched directory.

       delete A file or directory within a watched directory was deleted.

       delete_self
              A watched file or directory was deleted.  After this event the file or directory is
              no  longer  being  watched.   Note  that  this  event  can  occur even if it is not
              explicitly being listened for.

       unmount
              The filesystem on which a watched file or directory resides was  unmounted.   After
              this  event the file or directory is no longer being watched.  Note that this event
              can occur even if it is not explicitly being listened to.

EXAMPLES

   Example 1
       Running inotifywait at the command-line to wait for any file in the `test' directory to be
       accessed.  After running inotifywait, `cat test/foo' is run in a separate console.

       % inotifywait test
       Setting up watches.
       Watches established.
       test/ ACCESS foo

   Example 2
       A  short  shell script to efficiently wait for httpd-related log messages and do something
       appropriate.

       #!/bin/sh
       while ! inotifywait -e modify /var/log/messages; do
         if tail -n1 /var/log/messages | grep httpd; then
           kdialog --msgbox "Apache needs love!"
         fi
       done

   Example 3
       A custom output format  is  used  to  watch  `~/test'.   Meanwhile,  someone  runs  `touch
       ~/test/badfile; touch ~/test/goodfile; rm ~/test/badfile' in another console.

       % inotifywait -m -r --format '%:e %f' ~/test
       Setting up watches.  Beware: since -r was given, this may take a while!
       Watches established.
       CREATE badfile
       OPEN badfile
       ATTRIB badfile
       CLOSE_WRITE:CLOSE badfile
       CREATE goodfile
       OPEN goodfile
       ATTRIB goodfile
       CLOSE_WRITE:CLOSE goodfile
       DELETE badfile

   Example 4
       Enforce file permissions in directory `~/test'

       inotifywait -qmr -e 'moved_to,create' --format '%w%f%0' --no-newline ~/test |\
           while IFS= read -r -d '' file
           do
              chmod -v a+rX "$file"
           done

CAVEATS

       When  using inotifywait, the filename that is outputted is not guaranteed to be up to date
       after a move because it is the inode that is being monitored. Additionally,  none  of  the
       observed  operations are guaranteed to have been performed on the filename inotifywait was
       instructed to monitor in cases when the file is known by several names in the filesystem.

BUGS

       There are race conditions in the recursive directory watching code which can cause  events
       to  be  missed  if  they occur in a directory immediately after that directory is created.
       This is probably not fixable.

       It is assumed the inotify event queue will never overflow.

AUTHORS

       inotifywait was started by Rohan McGovern, and is currently maintained by Eric Curtin  and
       Radu  Voicilas.   https://www.openhub.net/p/inotify-tools/contributors/summary gives you a
       more complete list of contributors.

       inotifywait  is  part  of  inotify-tools.   The  inotify-tools  website  is  located   at:
       https://github.com/inotify-tools/inotify-tools/wiki

SEE ALSO

       inotifywatch(1), strftime(3), inotify(7)