Provided by: fusioninventory-agent-task-network_2.6-3_all bug

NAME

       fusioninventory-netdiscovery - Standalone network discovery

SYNOPSIS

       fusioninventory-netdiscovery [options] --first <address> --last <address>

         Options:
           --first <ADDRESS>      IP range first address
           --last <ADDRESS>       IP range last address
           --port <PORT[,PORT2]>  SNMP port (161)
           --protocol <PROT[,P2]> SNMP protocol/domain (udp/ipv4)
           --community <STRING>   SNMP community string (public)
           --credentials <STRING> SNMP credentials (version:1,community:public)
           --timeout <TIME        SNMP timeout, in seconds (1)
           --entity <ENTITY>      GLPI entity
           --threads <COUNT>      number of discovery threads (1)
           --control              output control messages
           -i --inventory         chain with netinventory task for discovered devices
           -s --save <FOLDER>     base folder where to save discovery and inventory xmls
                                   - netdiscovery xmls will go in <FOLDER>/netdiscovery
                                   - netinventory xmls will go in <FOLDER>/netinventory
           --debug                debug output
           -h --help              print this message and exit
           --version              print the task version and exit

DESCRIPTION

       fusioninventory-netdiscovery can be used to run a network discovery task without a GLPI
       server.

OPTIONS

       --first ADDRESS
           Set the first IP address of the network range to scan.

       --last ADDRESS
           Set the last IP address of the network range to scan.

       --port PORT[,PORT2]
           List of ports to try, defaults to: 161

           Set it to 161,16100 to first try on default port and then on 16100.

       --protocol PROTOCOL[,PROTOCOL2]
           List of protocols to try, defaults to: udp/ipv4

           Possible values are: udp/ipv4,udp/ipv6,tcp/ipv4,tcp/ipv6

       --community STRING
           Use given string as SNMP community (assume SNMPv1).

       --credentials STRING
           Use given string as SNMP credentials specification. This specification is a comma-
           separated list of key:value authentication parameters, such as:

           •   version:2c,community:public

           •   version:3,username:admin,authprotocol:sha,authpassword:s3cr3t

           •   etc.

       --timeout TIME
           Set SNMP timeout, in seconds.

       --entity ENTITY
           Set GLPI entity.

       --threads COUNT
           Use given number of inventory threads.

       --control
           Output server-agent control messages, in addition to inventory result itself.

       --debug
           Turn the debug mode on. Multiple usage allowed, for additional verbosity.

EXAMPLES

       Run a discovery against a network range, using SNMP version 1:

           $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
           --community public

       Run a discovery against a network range, using multiple SNMP credentials:

           $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
           --credentials version:2c,community:public \
           --credentials version:3,username:admin,authprotocol:sha,authpassword:s3cr3t