Provided by: hashcash_1.22-1_amd64 bug

NAME

       hashcash - hashcash anti-spam / denial of service counter-measure tool

SYNOPSIS

       Mint (create) stamps:

       hashcash -m [ [ options ] [ resource ... ] ... ]

       Check stamps:

       hashcash -c [ [ options ] -r resource ... ] [ stamp ... ]

       Speed estimates:

       hashcash -s [ options ] [ -b bits ]

       Purge database:

       hashcash -p now [ -j resource ] [ -k ] [ -t time ] [ -u ]

       Count partial preimage bits:

       hashcash -w [ options ] [ stamp ... ]

       Get resource name:

       hashcash -n [ options ] [ stamp ... ]

       Get time remaining until expiry

       hashcash -l [ options ] -e period [ stamp ... ]

DESCRIPTION

       Hashcash is a denial-of-service counter measure tool.  Its main current use is to help
       hashcash users avoid losing email due to content based and blacklist based anti-spam
       systems.

       The hashcash tool allows you to create hashcash stamps to attach to emails you send, and
       to verify hashcash stamps attached to emails you receive.  Email senders attach hashcash
       stamps with the X-Hashcash: header.  Vendors and authors of anti-spam tools are encouraged
       to exempt mail sent with hashcash from their blacklists and content based filtering rules.

       A hashcash stamp constitutes a proof-of-work which takes a parameterizable amount of work
       to compute for the sender.  The recipient can verify received stamps efficiently.

       The hashcash proof-of-work function is to compute partial hash preimages (the SHA1 hash
       function is used).  By choosing the number of bits of the preimage that are equal to 0,
       the work required to compute a partial preimage can be made arbitrarily expensive -- from
       fractions of a second to minutes or hours.  The verification is efficient requiring the
       same small cost whatever the preimage size.

       For more detailed discussion of other applications hashcash has been used for see
       http://www.hashcash.org/

USAGE NOTES

       In this man page a resource name is the name of the service or address the stamp is
       created for.  In the case of email, the resource name is the recipient's email address in
       the form user@domain.com.

       Minting stamps

       The -m flag must be given to mint a stamp.

       The resource name (recipient's email address) to mint the stamp against can be passed as
       an argument, or if omitted is read from stdin.  If stdin is a tty the user is prompted, if
       stdin is a pipe the resource name is just silently read.  The desired preimage size can be
       specified with the -b option.  If no preimage size is specified, the default is 20 bits.
       See also the -b default option.

       Checking stamps

       The -c flag must be given to check a stamps expiry.  The stamp to check can be given as an
       argument to "hashcash".  If no stamp is given the stamp is read from stdin.  If stdin is a
       tty the user will be prompted, if stdin is a pipe the stamp is just silently read.  A
       resource name (the recipient's email address) can be given with the -r option.  If a
       resource name is given the resource name is compared to the resource name in the stamp, if
       they do not match, the stamp is rejected.

       Note: if no resource name is given the stamp is anyway checked to see if it is otherwise
       valid, but it could be minted for a different resource, which would allow stamps to be
       reused across different resources, so hashcash will return unchecked exit code on exit.

       Stamps are by default considered to be valid for 28 days.  The validity period can be
       changed using the -e flag.

       If the stamp has expired or has a date in the future the stamp is rejected and the program
       exits immediately.

       If a required preimage size is given with the -b flag, the stamps value is computed and
       compared, if the stamp has insufficent value it is rejected, and the program exits
       immediately.  If the -b flag is not given, the stamp is checked to see if it is otherwise
       valid, but hashcash will return unchecked exit code on exit.

       If the stamp is double spent the stamp is rejected.  Double spending protection is
       discussed in more detail below in "Double Spending Protection".  If double spending
       protection is not enabled, the stamp could be double spent, so hashcash will return
       unchecked exit code (exit code 2) on exit.

       The -w flag can be used to request that the number of bits of the preimage are counted and
       displayed. The -n flag can be used to request that the resource name in the stamp is
       parsed out and displayed.  The -l flag can be used to request the number of seconds until
       expiry of the stamp is output.

       The program will only return exit codes valid or invalid if the -c flag is used, the -b
       flag is used, -d, -r resource are used.  These are the minimum set of options necessary to
       fully check the validty of a stamp.  If these criteria are not met, the program will
       return exit code unchecked (exit code 2) on exit.  (See also the -y flag.)

       Double Spending Protection

       If the -d flag is used when checking stamps, a database of spent stamps is kept.

       By default stamps expire after 28 days, without expiry the database would grow
       indefinately.  You can specify an alternate expiry period with the -e flag.  The
       recommended (and default) expiry period for email is 28 days.  After the expiry period
       amount of time, the stamp is anyway considered expired and may be purged from the database
       to save space.  (See "Purging Periodically vs on Next Access" for how to purge stamps.)

       For efficiency reasons a stamp is verified before it is checked in the database; if it is
       otherwise invalid no database activity will occur.

       Note: The decision about how long the stamp should be considered valid is up to the
       verifier.  If it is too short it is possible for some applications that the stamp will
       expire before arriving at the recipient (eg with email.)  The suggested value of 28 days
       should be safe for normal email delivery delays.  The choice is a trade-off between
       database size and risk of expiry prior to arrival, and depends on the application.

       Note: Different stamps in the same database can have different validity periods, so for
       example stamps for different resources with different validity periods can be stored in
       the same database, or the recipient may change the validity period for future stamps
       without affecting the validity of old stamps.

       Purging Periodically vs on Next Access

       To purge old stamps periodically while checking stamps use the -p period option to purge
       no sooner than the given time period since the last purge.  Purging can be used with the
       -k option to purge unexpired stamps also, and with the -j resource flag to purge only
       stamps for the given resource.

       There are circumstances where it may be inconvenient to purge stamps on the next access,
       for example if there is a large double spend database which takes some time to purge, and
       the response time of the hashcash checker is important.  To avoid this problem, purging
       can be done separately using just the -p now option to request just the purge operation.
       On unix for example you could call "hashcash -p now" in a cron job once per day, or on
       demand when disk was running low.

       Speed Estimates

       The -s flag requests measurement of how many preimage can be tested per second.  No stamp
       is minted, or verified.

       If the -b flag is used with this option, instead an estimate of how many seconds it would
       take to mint a stamp of the given size in bits is computed.  To find out how much time it
       will take to mint a default sized stamp use -s -b default.

       Notes

       All informational output is printed on stderr.  Minted stamps, and results of stamp
       verification and timing are printed on stdout.  The quiet flag -q suppresses all
       informational output.  The -v flag requests more informational output.  The requested
       output, which is the only information that is output in quiet mode (when -q is specified)
       is printed on standard output.  If stdout is a pipe, or when quiet mode is in effect the
       output is printed without description (ie just bits, just seconds, just resource).

OPTIONS

       -c  Check the expiry information of stamps given as an argument or on stdin.  (Use with
           -b, -d and -r resource to fully check stamps).

       -m  Mint stamps with the resources given as arguments or on stdin.

       -b bits
           When minting a stamp, create a preimage of at least this many bits.  When verifying a
           stamp require that it have a preimage of at minimum this many bits, otherwise reject
           it.  If omitted the default is used.

           When checking stamps, require that the stamps have this many bits.

           The default number of bits can be specified with -b default.  Bits relative to the
           default can also be specified with -b +n for n bits more than the default and -b -n
           for n bits less than the default.

           -b default, -b +0 and -b -0 are all equivalent.

           When doing the speed test -s, can to measure speed of default token with -s -b
           default.

       -r resource
           When minting stamps, the resource name (recipient's email address) to mint the stamp
           against can be given either with -r resource or as an argument to "hashcash".

           When checking stamps, the resource name (your own email address) is given with the -r
           option.  If the resource name is given it is checked against the resource name in the
           stamp, and if they do not match the stamp is rejected.  Note if the resource name is
           not given, stamps for other resources would be accepted, and therefore hashcash
           returns exit code unchecked (exit code 2) on exit.

       -o  When verifying stamps multiple resources can be given.  By default the resources are
           just checked one by one until a matching valid resource is found.  However when you
           use wildcards or regular expressions (see -E), it is useful to be able to specify that
           one resource overrides another.  For example this: -b15 -r adam@dev.null -o -b10
           *@dev.null states that mail to address adam@dev.null requires 15 bits, but mail to
           *@dev.null requires only 10 bits.  If we omitted the -o override relationship between
           the two resources, a stamp of 10 bits would be accepted for address adam@dev.null
           because while it would be rejected as having insufficient bits under the first rule,
           it would be accepted under the 2nd rule.  The -o option allows you avoid this problem.

       -e time
           Expiry period for spent stamps.  While checking stamps (using the -c flag), if the
           stamp was minted more than the specified amount of time ago, it is considered expired.
           If this option is not used, by default stamps expire after 28 days.  The expiry period
           is given in seconds by default (an argument of 0 means forever).  A single character
           suffix can be used to specify alternate units (m = minutes, h = hours, d = days, M =
           months, y = Y = years, and s = seconds).

           If used with the -d option, the spent stamp and its expiry period is recorded in the
           database.  See the -p option for description of how to purge stamps from the database.

           While minting stamps, the -e flag can have an effect on the resolution of time created
           in the stamp.  Without the -e option, the default resolution is days (time format:
           YYMMDD).  Alternate formats based on range of expiry period are as follows:

           While minting you can also given an explicit time width with the -z option instead.
           (-z overrides -e if both are given.  If neither are given the default is 6 chars (time
           format: YYMMDD)).

           The rules for automatically determining appropriate time width from -e if no -z option
           is given are:

           * period >= 2 years then time format YY is used rounded down to the nearest year
           start;
           * 2 years < period <= 2 months then time format YYMM is used rounded down to the
           nearest month start;
           * 2 months < period <= 2 days then time format YYMMDD is used rounded down to the
           beginning of the nearest day;
           * 2 days < period <= 2 minutes then time format YYMMDDhhmm is used rounded down to the
           beginning of the nearest minute;
           * period < 2 minutes then time format YYMMDDhhmmss is used in seconds.

           Note the rounding down is based on UTC time, not local time.  This can lead to
           initially surprising results when rounding down to eg days in time zones other than
           GMT (UTC = GMT).  It may be clearer to understand if you use the -u option.

       -z width
           The -z option is for use during minting and allows user choice of width of time width
           field.  See also the -e option given in combination with -m to specify an implicit
           time field width under the description of the -e flag.  Valid widths are 6,10 or 12
           chars corresponding respectively to: YYMMDD, YYMMDDhhmm, and YYMMDDhhmmss rounded down
           to the nearest day, or minute respectively.

           Note the rounding down is based on UTC time, not local time.  This can lead to
           initially surprising results when rounding down to eg days in time zones other than
           GMT (UTC = GMT).  It may be clearer to understand if you use the -u option.

       -g period
           The -g option is for use when checking hashcash stamps with the -c option and
           specifies a grace period for clock skew, ie if a hashcash stamp arrives with a date in
           the future or in the past it will not be rejected as having a futuristic date (or as
           being expired) unless it is more futuristic (or has been expired for longer) than this
           period.  The default is 2 days, which means as long as the sending system's clock is
           no more than 2 days ahead (or 2 days behind) of the receiving system's clock, the
           hashcash stamp will still be accepted.

           The default units for grace period are seconds.  A single character suffix can be used
           to specify alternate units (m = minutes, h = hours, d = days, M = months, y = Y =
           years, and s = seconds).

       -d  Store stamps in a double spend database.  If stamp has been seen before it will be
           rejected even if it is otherwise valid.  The default database file is database.sdb in
           the current directory.  Only otherwise valid stamps will be stored in the database.
           Only fully validated stamps will be stored in the database, unless the -y option is
           given.

       -f dbname
           Use dbname instead of default filename for double spend database.

       -p period
           Purges the database of expired stamps if the given time period has passed since the
           last time it was purged.  As a convenience -p now is equivalent to -p 0 both of which
           mean purge now, regardless of when the database was last purged.

           If used in combination with -j resource only the stamps minted for the given resource
           are purged.

           If used in combination with -k all stamps even un-expired stamps are purged.  Can be
           used in combination with -t time to expire as if the current time were the given time.

       -k  Use with option -p to request all stamps are purged rather than just expired ones.

       -j resource
           Use with option -p to request that just stamps matching the given resource name are to
           be purged, rather than the default which is to purge all expired stamps.  If the
           resource name is the empty string, all stamps are matched (this is equivalent to
           omitting the -j option).

           Note the -E, -M and -S type of match flags also apply to resources given with the -j
           resource flag.

       -s  Print timing information only, and don't proceed to create a stamp.  If combined with
           -b bits flag print estimate of how long the requested preimage size would take to
           compute, if -s given by itself, just prints speed of the preimage finder.  To print an
           estimate of how long the default number of bits would take use -b default.

       -h  Print short usage information.

       -v  Print more verbose informational output about the stamp minting or verification.  (If
           -v is the only argument, prints the tool version number.)

       -V  Prints tool version number.

       -q  Batch mode.  Prints no information other than output.  This option overrides the -v
           option.

       -X  When minting, prints the hashcash email X-header 'X-Hashcash: ' before the stamp.
           Without this option just the bare stamp is printed.

           When checking, after scanning stamps given as arguments, scans stdin for lines
           starting with the string 'X-Hashcash:', and uses the rest of the matching line as the
           stamp.  Only the lines up to and ending at the first blank line are scanned (see also
           -i flag which can be used to override this).  A blank line is the separator used to
           separate the headers from the body of a mail message or USENET article.  This is meant
           to make it convenient to pipe a mail message or USENET article to hashcash on stdin.

       -x extension
           An extension string composed of name value sets.  The extension format is described
           below in the section on the hashcash stamp format.  This allows users to define their
           own stamp extensions which are hashed into the stamp, verified by recipients that
           support them, and ignored by recipients that don't support them.  Note the extension
           hook mechanism has not yet been implemented.  This will come in a subsequent release.

       -i  When checking and using the -X flag, ignore the blank line boundary between headers
           and body of the message, and check for stamps in the body too if one is not found in
           the headers.

       -t time
           Pretend the current time is the time given for purposes of minting stamps, verifying
           stamps and purging old stamps from the database.  Time is given in a format based on
           UTCTIME format YYMMDD[hhmm[ss]].

           Time is expressed in local time by default.  Use with -u flag to give time in UTC
           (GMT).

           You can also give time relative to the current time by prefixing the argument with +
           or -.  The default units for relative time are seconds.  A single character suffix can
           be used to specify alternate units (m = minutes, h = hours, d = days, M = months, y =
           Y = years, and s = seconds).

           Note: when time is expressed in local time, if there is daylight savings in your
           timezone, there are one or two ambiguous hours per year at the time of change from
           daylight savings time to normal time.

       -u  Input and output absolute times in UTC (GMT) instead of local time.

       -a period
           Add (or subtract if number is negative) a random value from the current time before
           minting the stamp.  This hides the time the stamp was created, which may be useful for
           anonymous users.  Note adding (rather than subtracting) a random time may be risky if
           the stamp takes less than the added time to arrive as the recipient will reject stamps
           with time stamps in the future.

       -n  Print resource name parsed from stamp being verified.  Returns exit code unchecked on
           exit.

       -l  Print number of seconds left before stamp expires.  Returns exit code unchecked on
           exit.

           Note: the calculation includes the grace period, so can be up to 2 times grace period
           longer than you might otherwise expect (clock fast but system has to presume it could
           be slow).  If you want to exclude the grace period add -g0 to set grace period to 0
           for the calculation.

       -w  Print number of bits of preimage of stamp.  Returns exit code unchecked on exit.

       -y  Returns success if the stamp is valid even if it is not fully checked.  Use with -c
           where not all of -d, -r are specified to get success exit code on valid but partially
           checked stamp.  Similarly can use with -n, -l, -w with same effect.

       -M  When checking stamps, allow wildcard * matching in the resource name to make it
           simpler to specify multiple email addresses and to allow matching catch-all addresses
           and addresses including subdomains.  This is the default.  See also -S, -E and -C

       -S  When checking stamps use simple text compare to compare resource names to those in
           stamps.  See also -M, -E and -C.

       -E  When checking stamps use regular expressions to specify resource names to make it
           simpler to specify multiple email addresses, catch-all addresses, classes of extension
           addresses and addresses including subdomains.  Note regular expression syntax is POSIX
           style: special characters do not need to be quoted to have their special meaning; but
           they do have to be quoted with \ to that character in the searched string.  The
           regular expression automatically has ^ added at the beginning and $ added at the end,
           if they are not specified.  The special characters ^ matches the beginning of the
           resource, and $ matches the end of resource.

           (Note even if compiled with BSD regular expressions, POSIX style syntax is used; also
           note BSD regular expressions do not support ranges {}.)

       -C  By default resources are canonicalized to lower case on minting and on checking.  The
           -C flag overrides this so that resources are treated as case sensitive on checking,
           and not canonizalized on minting.

       -P  Print progress info (number of iterations, expected iterations, percentage done, best
           stamp size found so far).

       -O core
           Select hashcash core with that number.  Currently 0-9 are valid cores.  Not all cores
           work on all architectures.  Eg some are x86 specific assembler, others PPC specific
           assembler.  If a core is not valid hashcash returns failure and explains what
           happened.

       -Z n
           Compress the stamp.  This is a time vs space trade off.  Larger stamps are faster, but
           arguably slightly ugly.  For fastest stamps (the default) use -Z 0; for partly
           compressed stamps use -Z 1; for very compressed, but somewhat slow stamps use -Z 2.
           (Note: due to a late discovered bug, -Z2 is the same as -Z1 for now until I can fix
           that.)

EXAMPLES

       Creating stamps

       "hashcash -s"
           Print timing information about how many preimages the machine can try per second.

       "hashcash -sv"
           More accurate but quite slow benchmarking of different processor specific minting
           cores.

       "hashcash -s -b default"
           Print how long it would take the machine to compute a default sized preimage (but
           don't actually compute a preimage).

       "hashcash -s -b 32"
           Print how long it would take the machine to compute a 32 bit preimage (but don't
           actually compute a preimage).

       "hashcash -m"
           Mint a stamp.  Will prompt for resource name and mint with default value (number of
           preimage bits).

       "hashcash -m foo"
           Compute preimage on resource foo.  Will mint with default value (number of preimage
           bits).

       "hashcash -m foo -b 10"
           Compute 10 bit preimage on resource foo.

       "hashcash -a -3d"
           Subtract a random time of between 0 days and 3 days from the stamp's creation time.
           This is the same fuzz factor used by mixmaster to reduce risk of timing-correlations.

       Examining Stamps

       "hashcash -w 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Report the value of the stamp (how many bits of preimage) there are.  The example is a
           24 bit preimage, which takes on average 25 seconds to create on a 3Ghz P4.

       "hashcash -mq -b 10 foo ⎪ hashcash -w"
           Create a stamp in batch mode, pass to hashcash on stdin to verify, have it print how
           many bits there were.

       "hashcash -n 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Report the resource name from the stamp.  The resource name in the example is foo.

       "hashcash -l -e 30y 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Report how long until the stamp expires if it expires in 30 years from its creation
           date.  (Note dates too far into the future run into the 2038 end of Epoch, which is
           the unix time analog of the y2k bug).

       Verifying Stamps

       "hashcash -c 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Check if the stamp is valid.  Note as we are not checking the stamp in a double spend
           database, and did not specify a resource name or required number of bits of preimage
           and hashcash will consider the stamp not fully checked, and it will report it as valid
           but not fully unchecked, or as invalid if there is any problem with the stamp.

       "hashcash -c -b24 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Check that the value of the stamp is greater or equal to 24 bits.  This example has 24
           bit value.  If you increase the requested number of bits or replace the stamp with one
           with less than 24 bit preimage the stamp will be rejected.

       "hashcash -c -b24 -r foo 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           As above check if the stamp has sufficient value, but in addition check that the
           resource name given matches the resource name in the stamp.

       Double Spending Prevention

       The examples given in "Verifying Stamps" can be modified to keep a double spend database
       so that the same stamp will not be accepted twice.  Note a stamp will only be checked in
       and added to the database if it is otherwise valid and fully checked (a required number of
       bits of preimage has been specified and a resource has been specified).

       "hashcash -cd -b 10 -r foo 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Check the stamp and add to double spent database if it's valid (has correct resource
           name and sufficient value).

       "hashcash -cd -b 10 -r foo 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Try to double spend the stamp.  It will be rejected as double spent.

       Stamp Expiry

       To prevent the double spend database growing indefinately, the recipient can request that
       stamps be no older than a specified period.  After expiry old stamps can dropped from the
       double spend database as they will no longer be needed -- expired stamps can be rejected
       based purely on their old date, so the space taken by expired stamps in the double spend
       database can be saved without risk of accepting an expired though otherwise valid stamp.

       The third field of the stamp is the UTC time since 1st January 1970.  The default time
       format is YYMMDD, time rounded down to the nearest day.  The default validity period is 28
       days.

       You can provide an alternative validity period with the -e option.

       "hashcash -cd -b 10 -e 2d -r foo 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Try verifying an old stamp, the above stamp was created 11 Aug 2002.

           We gave option -e 2d so the stamps expiry date is 2 days after creation, which is now
           in the past.

           Note: if the creation time is expressed in the stamp in days, the precise creation
           date is the beginning of the specified day in UTC time (similarly for alternate units
           the creation time is rounded down to the beginning of the unit it is expressed in).
           For units in days, for example, this may mean depending on your time zone that the
           stamp appears to be considered invalid in under the specified expiry period in days
           relative to your relative view of what day it is, as the calculation is based on
           current time in UTC, and the creation time of the stamp is expressed in UTC time.

       "hashcash -cd -b 10 -r foo 1:24:040806:foo::511801694b4cd6b0:1e7297a"
           Test whether the stamp is otherwise valid, apart from having expired.  Omitting the -e
           tells hashcash that the stamp will never expire.  An expiry period of forever can also
           be given explicitly like this: -e 0, where an expiry period of 0 means forever.

       Purging old stamps

       If the -c, -d options are used together, each time a stamp is checked, if it is valid and
       all of the mandatory aspects of the stamp are verified (preimage bits check, resource name
       check) then the stamp and its expiry period is written to the database file.  The default
       expiry period if an expiry period is not given explicitly with the -e option is 28 days
       (ie stamps expire after 4 weeks).

       First mint and then add a stamp:

       "hashcash -m -b 10 foo -e 1m > stamp"
           Note: we specified an expiry on minting in this example, to ensure that the stamp
           creation time is given in high enough resolution in the stamp that the stamp will not
           be considered expired at time of creation.  (Recall the default resolution is in days,
           a stamp created with a creation time rounded down to the beginging of the day is
           unlikely to be considered valid 1 minute later unless you mint it at midnight UTC
           time.)

       "hashcash -cd -e 1m -b 10 -r foo < stamp"
           The stamp expires in 1 minute.  Wait 1 minute and then explicitly request that expired
           stamps be purged:

       "hashcash -p now"
           Then try resubmitting the same stamp:

       "hashcash -cd -e 1m -b 10 -r foo < stamp"
           and the stamp will be rejected anyway as it has expired, illustrating why it was not
           necessary to keep this stamp in the database.

           With the default database (the sdb format) the database contents are human readable,
           so you can view their contents by cating them to the terminal:

       "cat hashcash.sdb"
           to see that the stamp really is added and then after puring subsequently purged due to
           expiry.

       Purging old stamps on Demand

       As a convenience you can purge at the same time as checking stamps by using the -p option
       with the -c option.

       "hashcash -m -b 10 foo > stamp"
       "hashcash -cd -p now -e 1 -b 10 -r foo < stamp"
           It may be inefficient to purge stamps on every use as the entire database has to be
           scanned for expired stamps.  By giving a time period to the -p option, you can tell
           "hashcash" to purge no more frequently than that time period since the previous purge.

           For example:

       "hashcash -cd -p 1d -e 1 -b 10 -r foo < stamp"
           tells "hashcash" to purge any expired stamps no more than once per day.

       "hashcash -p 1M -j foo"
           tells "hashcash" to purge only expired stamps matching resource foo once per month.

       "hashcash -p now -k"
           tells "hashcash" to purge all stamps (expired and unexpired) now.

stamp format (version 1)

       The current stamp format is version 1.  This tool can verify hashcash version 0 stamps
       also, but version 0 stamps are no longer created as they are being phased out in favor of
       the more extensible v1 stamp format.

       ver:bits:date:resource:[ext]:rand:counter

       where

       ver = 1
       bits = how many bits of partial-preimage the stamp is claimed to have
       date = YYMMDD[hhmm[ss]]
       resource = resource string (eg IP address, email address)
       ext = extension -- ignored in the current version
           Format of extension:

           [name1[=val1[,val2...]];[name2[=val1[,val2...]]...]]
               Note the value can also contain =.  Example extension (not a real one):

                       name1=2,3;name2;name3=var1=2,var2=3,2,val

               Which would be extension name1 has values 2 and 3; extension name2 has no values;
               extension name3 has 3 values "var1=2", "var2=3", "2" and "val".  The hashcash
               extension may interpret the values as it sees fit eg "var1=2" could be the value
               of an option to the extension name3.

       rand = string of random characters from alphabet a-zA-Z0-9+/= to avoid preimage with other
       sender's stamps
       counter = to find a stamp with the desired number of preimage bits need to try lots of
       different strings this counter is incremented on each try. The Counter is also composed of
       characters from the alphabet a-zA-Z0-9+/=.  (Note an implementation is not required to
       count sequentially).

FILES

       hashcash.sdb
           default double spend database

EXIT STATUS

       "hashcash" returns success (exit code 0) after successfully minting a stamp, after fully
       checking a stamp and finding it valid, and after a timing test.

       If when checking a stamp it is found to be invalid (due to being malformed, being expired,
       having insufficient value, having a date in the future, or being double spent), "hashcash"
       returns failure (exit code 1).

       If insufficient options are given to fully check a stamp, if the stamp is otherwise valid
       return unchecked (exit code 2).  If the -y flag is given and hashcash would normally
       return unchecked, exit code success is returned instead.

       If any exception occurs (file read failure for database checking or corrupted database
       contents) an exit status of 3 is returned.

AUTHOR

       Written by Adam Back <adam@cypherspace.org>

SEE ALSO

       sha1sum(1), sha1(1), http://www.hashcash.org/