Provided by: jack-tools_20131226-1.1_amd64 bug

NAME

       jack-udp - JACK UDP Transport Client

SYNOPSIS

       jack-udp [options] send|recv

OPTIONS

       -b : Set the ring buffer size in frames (default=4096). -c : Set the client name
       (default=jack-udp-PID). -n : Set the number of channels, and therefore the number of JACK
       ports (default=2). -p : Set the port number (default=57160). -r : The remote host name,
       for use in send mode (default="127.0.0.1").

DESCRIPTION

       jack-udp is a UDP audio transport mechansim for JACK. The send mode reads signals from a
       set of JACK input ports and sends UDP packets to the indicated port at the indicated host
       at a rate determined by the local JACK daemon. The recv mode reads incoming packets at the
       indi- cated port and writes the incoming data to a set of JACK output ports at a rate that
       is determined by the local JACK daemon.

       This transport mechanism is unreliable. Both send and recv clients will report buffer
       overflow and underflow occurences, and recv clients will report dropped and out-of-order
       packets, and shutdown on channel mismatch packets. In practice this mechanism can be made
       highly reli- able over local networks.

       jack-udp implements no connection logic, use jack-plumbing(1) instead.

EXAMPLE

           192.0.0.1:~$ jack-udp -r 192.0.0.2 send
           192.0.0.2:~$ jack-udp recv

AUTHOR

       Rohan Drape http://rd.slavepianos.org/

SEE ALSO

       jackd(1)

AUTHOR

       Rohan Drape <rd@slavepianos.org>
           Author.

                                            12/11/2022                                JACK-UDP(1)