Provided by: morse-simulator_1.4-8_amd64 bug

NAME

       morse_sync - Tool to synchronize the MORSE simulator

SYNOPSIS

       morse_sync [-h] [-d] [-H host] [-P port] [-t timeout]  -p <period>

DESCRIPTION

       morse_sync  is  a  tool  which sends a periodic signal to the Morse simulator, allowing to
       synchronize it to an external clock. It relies on the socket synchronisation  protocol  of
       Morse.

       Moreover, morse_sync reads command on its input. It accepts the following commands:

       quit   End the morse_sync tool

       set_period <period>
              Change the period of message sent

OPTIONS

       -d, --debug
              Enable debug information

       -H, --host <host>
              Configure the host where Morse is running

       -P, --port <port>
              Configure the port of the synchronisation socket of Morse

       -p, --period <period>
              Configure the period (in sec) to which the signal is sent to Morse

       -h, --help
              Displays information regarding the program use.

       -t, --timeout <timeout>
              Configure   time  (in  sec)  during  morse_sync  tries  to  connect  to  the  Morse
              synchronisation socket. It is particularly useful to  handle  delay  in  the  Morse
              initialisation. The default value is 10 sec.

SEE ALSO

       morse(1)

COPYRIGHT

       Copyright  (c)  2009-2010  ONERA Copyright (c) 2009-2016 LAAS-CNRS Copyright (c) 2015-2016
       ISAE-SUPAERO Copyright held by the MORSE authors or the institutions employing them, refer
       to  the  AUTHORS  file  for  the  list.  The  list of the contributors to each file can be
       obtained from the commit history ('git log <file>').