Provided by: slurm-client_22.05.8-3_amd64 
NAME
sacct - displays accounting data for all jobs and job steps in the Slurm job accounting
log or Slurm database
SYNOPSIS
sacct [OPTIONS...]
DESCRIPTION
Accounting information for jobs invoked with Slurm are either logged in the job accounting
log file or saved to the Slurm database, as configured with the AccountingStorageType
parameter.
The sacct command displays job accounting data stored in the job accounting log file or
Slurm database in a variety of forms for your analysis. The sacct command displays
information on jobs, job steps, status, and exitcodes by default. You can tailor the
output with the use of the --format= option to specify the fields to be shown.
Job records consist of a primary entry for the job as a whole as well as entries for job
steps. The Job Launch page has a more detailed description of each type of job step.
<https://slurm.schedmd.com/job_launch.html#job_record>
For the root user, the sacct command displays job accounting data for all users, although
there are options to filter the output to report only the jobs from a specified user or
group.
For the non-root user, the sacct command limits the display of job accounting data to jobs
that were launched with their own user identifier (UID) by default. Data for other users
can be displayed with the --allusers, --user, or --uid options.
Elapsed time fields are presented as [days-]hours:minutes:seconds[.microseconds]. Only
'CPU' fields will ever have microseconds.
The default input file is the file named in the AccountingStorageLoc parameter in
slurm.conf.
NOTE: If designated, the slurmdbd.conf option PrivateData may further restrict the
accounting data visible to users which are not SlurmUser, root, or a user with
AdminLevel=Admin. See the slurmdbd.conf man page for additional details on restricting
access to accounting data.
NOTE: The contents of Slurm's database are maintained in lower case. This may result in
some sacct output differing from that of other Slurm commands.
NOTE: Much of the data reported by sacct has been generated by the wait3() and getrusage()
system calls. Some systems gather and report incomplete information for these calls; sacct
reports values of 0 for this missing data. See your systems getrusage (3) man page for
information about which data are actually available on your system.
OPTIONS
-A, --accounts=<account_list>
Displays jobs when a comma separated list of accounts are given as the argument.
-L, --allclusters
Display jobs ran on all clusters. By default, only jobs ran on the cluster from
where sacct is called are displayed.
-X, --allocations
Only show statistics relevant to the job allocation itself, not taking steps
into consideration.
NOTE: Without including steps, utilization statistics for job allocation(s) will
be reported as zero.
-a, --allusers
Displays all users' jobs when run by user root or if PrivateData is not
configured to jobs. Otherwise display the current user's jobs
-x, --associations=<assoc_list>
Displays the statistics only for the jobs running under the association ids
specified by the assoc_list operand, which is a comma-separated list of
association ids. Space characters are not allowed in the assoc_list. Default is
all associations.
-B, --batch-script
This option will print the batch script of job if the job used one. If the job
didn't have a script 'NONE' is output.
NOTE: AccountingStoreFlags=job_script is required for this.
NOTE: Requesting specific job(s) with '-j' is required for this.
-b, --brief
Displays a brief listing consisting of JobID, State, and ExitCode.
-M, --clusters=<cluster_list>
Displays the statistics only for the jobs started on the clusters specified by
the cluster_list operand, which is a comma-separated list of clusters. Space
characters are not allowed in the cluster_list. A value of 'all' will query to
run on all clusters. The default is current cluster you are executing the sacct
command on or all clusters in the federation when executed on a federated
cluster. This option implicitly sets the --local option.
-c, --completion
Use job completion data instead of job accounting. The JobCompType parameter in
the slurm.conf file must be defined to a non-none option. Does not support
federated cluster information (local data only).
-C, --constraints=<constraint_list>
Comma separated list to filter jobs based on what constraints/features the job
requested. Multiple options will be treated as 'and' not 'or', so the job would
need all constraints specified to be returned not one or the other.
--delimiter=<characters>
ASCII characters used to separate the fields when specifying the -p or -P
options. The default delimiter is a '|'. This option is ignored if -p or -P
options are not specified.
-D, --duplicates
If Slurm job ids are reset, some job numbers will probably appear more than once
in the accounting log file but refer to different jobs. Such jobs can be
distinguished by the "submit" time stamp in the data records.
When data for specific jobs are requested with the --jobs option, sacct returns
the most recent job with that number. This behavior can be overridden by
specifying --duplicates, in which case all records that match the selection
criteria will be returned.
NOTE: Revoked federated sibling jobs are hidden unless the --duplicates option
is specified.
-E, --endtime=<end_time>
Select jobs in any state before the specified time. If states are given with
the -s option return jobs in this state before this period. See the DEFAULT
TIME WINDOW for more details.
Valid time formats are:
HH:MM[:SS][AM|PM]
MMDD[YY][-HH:MM[:SS]]
MM.DD[.YY][-HH:MM[:SS]]
MM/DD[/YY][-HH:MM[:SS]]
YYYY-MM-DD[THH:MM[:SS]]
today, midnight, noon, fika (3 PM), teatime (4 PM)
now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]
--env-vars
This option will print the running environment of a batch job, otherwise 'NONE'
is output.
NOTE: AccountingStoreFlags=job_env is required for this.
NOTE: Requesting specific job(s) with '-j' is required for this.
--federation
Show jobs from the federation if a member of one.
-f, --file=<file>
Causes the sacct command to read job accounting data from the named file instead
of the current Slurm job accounting log file. Only applicable when running the
jobcomp/filetxt plugin. Setting this flag implicitly enables the -c flag.
-F, --flags=<flag_list>
Comma separated list to filter jobs based on what various ways the jobs were
handled. Current flags are SchedSubmit, SchedMain, SchedBackfill. These
particular options describe the scheduler that started the job.
-o, --format
Comma separated list of fields. (use "--helpformat" for a list of available
fields).
NOTE: When using the format option for listing various fields you can put a
%NUMBER afterwards to specify how many characters should be printed.
e.g. format=name%30 will print 30 characters of field name right justified. A
%-30 will print 30 characters left justified.
When set, the SACCT_FORMAT environment variable will override the default
format. For example:
SACCT_FORMAT="jobid,user,account,cluster"
-g, --gid=, --group=<gid_or_group_list>
Displays the statistics only for the jobs started with the GID or the GROUP
specified by the gid_list or the group_list operand, which is a comma-separated
list. Space characters are not allowed. Default is no restrictions.
-h, --help
Displays a general help message.
-e, --helpformat
Print a list of fields that can be specified with the --format option.
Fields available:
Account AdminComment AllocCPUS AllocNodes
AllocTRES AssocID AveCPU AveCPUFreq
AveDiskRead AveDiskWrite AvePages AveRSS
AveVMSize BlockID Cluster Comment
Constraints ConsumedEnergy ConsumedEnergyRaw Container
CPUTime CPUTimeRAW DBIndex DerivedExitCode
Elapsed ElapsedRaw Eligible End
ExitCode Flags GID Group
JobID JobIDRaw JobName Layout
MaxDiskRead MaxDiskReadNode MaxDiskReadTask MaxDiskWrite
MaxDiskWriteNode MaxDiskWriteTask MaxPages MaxPagesNode
MaxPagesTask MaxRSS MaxRSSNode MaxRSSTask
MaxVMSize MaxVMSizeNode MaxVMSizeTask McsLabel
MinCPU MinCPUNode MinCPUTask NCPUS
NNodes NodeList NTasks Partition
Priority QOS QOSRAW Reason
ReqCPUFreq ReqCPUFreqGov ReqCPUFreqMax ReqCPUFreqMin
ReqCPUS ReqMem ReqNodes ReqTRES
Reservation ReservationId Reserved ResvCPU
ResvCPURAW Start State Submit
SubmitLine Suspended SystemComment SystemCPU
Timelimit TimelimitRaw TotalCPU TRESUsageInAve
TRESUsageInMax TRESUsageInMaxNode TRESUsageInMaxTask TRESUsageInMin
TRESUsageInMinNode TRESUsageInMinTask TRESUsageInTot TRESUsageOutAve
TRESUsageOutMax TRESUsageOutMaxNode TRESUsageOutMaxTask TRESUsageOutMin
TRESUsageOutMinNode TRESUsageOutMinTask TRESUsageOutTot UID
User UserCPU WCKey WCKeyID
WorkDir
NOTE: When using with Ave[RSS|VM]Size or their values in TRESUsageIn[Ave|Tot]. They
represent the average/total of the highest watermarks over all ranks in the step. When
using sstat they represent the average/total at the moment the command was run.
NOTE: TRESUsage*Min* values represent the lowest highwater mark in the step.
The section titled "Job Accounting Fields" describes these fields.
-j, --jobs=<job[.step]>
Displays information about the specified job[.step] or list of job[.step]s.
The job[.step] parameter is a comma-separated list of jobs. Space characters
are not permitted in this list.
NOTE: A step id of 'batch' will display the information about the batch step.
By default sacct shows only jobs with Eligible time, but with this option the
non-eligible will be also shown.
NOTE: If --state is also specified, as non-eligible are not PD, then
non-eligible jobs will not be displayed. See the DEFAULT TIME WINDOW for
details about how this option changes the default -S and -E options.
--json Dump job information as JSON. All other formatting arguments will be ignored.
--local Show only jobs local to this cluster. Ignore other clusters in this federation
(if any). Overrides --federation.
-l, --long
Equivalent to specifying:
--format=jobid,jodidraw,jobname,partition,maxvmsize,maxvmsizenode,
maxvmsizetask,avevmsize,maxrss,maxrssnode,maxrsstask,averss,maxpages,
maxpagesnode,maxpagestask,avepages,mincpu,mincpunode,mincputask,avecpu,ntasks,
alloccpus,elapsed,state,exitcode,avecpufreq,reqcpufreqmin,reqcpufreqmax,
reqcpufreqgov,reqmem,consumedenergy,maxdiskread,maxdiskreadnode,maxdiskreadtask,
avediskread,maxdiskwrite,maxdiskwritenode,maxdiskwritetask,avediskwrite,
reqtres,alloctres,tresusageinave,tresusageinmax,
tresusageinmaxn,tresusageinmaxt,tresusageinmin,tresusageinminn,tresusageinmint,
tresusageintot,tresusageoutmax,tresusageoutmaxn,
tresusageoutmaxt,tresusageoutave,tresusageouttot
--name=<jobname_list>
Display jobs that have any of these name(s).
-i, --nnodes=<min[-max]>
Return jobs that ran on the specified number of nodes.
-I, --ncpus=<min[-max]>
Return jobs that ran on the specified number of cpus.
--noconvert
Don't convert units from their original type (e.g. 2048M won't be converted to
2G).
-N, --nodelist=<node_list>
Display jobs that ran on any of these node(s). node_list can be a ranged string.
-n, --noheader
No heading will be added to the output. The default action is to display a
header.
-p, --parsable
Output will be '|' delimited with a '|' at the end. See also the --delimiter
option.
-P, --parsable2
Output will be '|' delimited without a '|' at the end. See also the --delimiter
option.
-r, --partition
Comma separated list of partitions to select jobs and job steps from. The
default is all partitions.
-q, --qos Only send data about jobs using these qos. Default is all.
-R, --reason=<reason_list>
Comma separated list to filter jobs based on what reason the job wasn't
scheduled outside resources/priority.
-S, --starttime
Select jobs in any state after the specified time. Default is 00:00:00 of the
current day, unless the '-s' or '-j' options are used. If the '-s' option is
used, then the default is 'now'. If states are given with the '-s' option then
only jobs in this state at this time will be returned. If the '-j' option is
used, then the default time is Unix Epoch 0. See the DEFAULT TIME WINDOW for
more details.
Valid time formats are:
HH:MM[:SS][AM|PM]
MMDD[YY][-HH:MM[:SS]]
MM.DD[.YY][-HH:MM[:SS]]
MM/DD[/YY][-HH:MM[:SS]]
YYYY-MM-DD[THH:MM[:SS]]
today, midnight, noon, fika (3 PM), teatime (4 PM)
now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]
-s, --state=<state_list>
Selects jobs based on their state during the time period given. Unless
otherwise specified, the start and end time will be the current time when the
--state option is specified and only currently running jobs can be displayed. A
start and/or end time must be specified to view information about jobs not
currently running. See the JOB STATE CODES section below for a list of state
designators. Multiple state names may be specified using comma separators.
Either the short or long form of the state name may be used (e.g. CA or
CANCELLED) and the name is case insensitive (i.e. ca and CA both work).
NOTE: Note for a job to be selected in the PENDING state it must have
"EligibleTime" in the requested time interval or different from "Unknown". The
"EligibleTime" is displayed by the "scontrol show job" command. For example
jobs submitted with the "--hold" option will have "EligibleTime=Unknown" as they
are pending indefinitely.
NOTE: When specifying states and no start time is given the default start time
is 'now'. This is only when -j is not used. If -j is used the start time will
default to 'Epoch'. In both cases if no end time is given it will default to
'now'. See the DEFAULT TIME WINDOW for more details.
-K, --timelimit-max
Ignored by itself, but if timelimit_min is set this will be the maximum
timelimit of the range. Default is no restriction.
-k, --timelimit-min
Only send data about jobs with this timelimit. If used with timelimit_max this
will be the minimum timelimit of the range. Default is no restriction.
-T, --truncate
Truncate time. So if a job started before --starttime the start time would be
truncated to --starttime. The same for end time and --endtime.
-u, --uid=, --user=<uid_or_user_list>
Use this comma separated list of UIDs or user names to select jobs to display.
By default, the running user's UID is used.
--units=[KMGTP]
Display values in specified unit type. Takes precedence over --noconvert option.
--usage Display a command usage summary.
--use-local-uid
When displaying UID, sacct uses the UID stored in Slurm's accounting database by
default. Use this command to make Slurm use a system call to get the UID from
the username. This option may be useful in an environment with multiple clusters
and one database where the UID's aren't the same on all clusters.
-v, --verbose
Primarily for debugging purposes, report the state of various variables during
processing.
-V, --version
Print version.
-W, --wckeys=<wckey_list>
Displays the statistics only for the jobs started on the wckeys specified by the
wckey_list operand, which is a comma-separated list of wckey names. Space
characters are not allowed in the wckey_list. Default is all wckeys.
--whole-hetjob[=yes|no]
When querying and filtering heterogeneous jobs with --jobs, Slurm will default
to retrieving information about all the components of the job if the het_job_id
(leader id) is selected. If a non-leader heterogeneous job component id is
selected then only that component is retrieved by default. This behavior can be
changed by using this option. If set to 'yes' (or no argument), then information
about all the components will be retrieved no matter which component is selected
in the job filter. If set to 'no' then only the selected heterogeneous job
component(s) will be retrieved, even when selecting the leader.
--yaml Dump job information as YAML. All other formatting arguments will be ignored.
Job Accounting Fields
Descriptions of each job accounting field can be found below. Note that the Ave*, Max*
and Min* accounting fields look at the values for all the tasks of each step in a job and
return the average, maximum or minimum values for the job step.
ALL Print all fields listed below.
Account Account the job ran under.
AdminComment
A comment string on a job that must be set by an administrator, the
SlurmUser or root.
AllocCPUs Count of allocated CPUs. Equivalent to NCPUS.
AllocNodes
Number of nodes allocated to the job/step. 0 if the job is pending.
AllocTres Trackable resources. These are the resources allocated to the job/step
after the job started running. For pending jobs this should be blank.
For more details see AccountingStorageTRES in slurm.conf.
NOTE: When a generic resource is configured with the no_consume flag, the
allocation will be printed with a zero.
AssocID Reference to the association of user, account and cluster.
AveCPU Average (system + user) CPU time of all tasks in job.
AveCPUFreq
Average weighted CPU frequency of all tasks in job, in kHz.
AveDiskRead
Average number of bytes read by all tasks in job.
AveDiskWrite
Average number of bytes written by all tasks in job.
AvePages Average number of page faults of all tasks in job.
AveRSS Average resident set size of all tasks in job.
AveVMSize Average Virtual Memory size of all tasks in job.
BlockID The name of the block to be used (used with Blue Gene systems).
Cluster Cluster name.
Comment The job's comment string when the AccountingStoreFlags parameter in the
slurm.conf file contains 'job_comment'. The Comment string can be
modified by invoking sacctmgr modify job or the specialized sjobexitmod
command.
Constraints
Feature(s) the job requested as a constraint.
ConsumedEnergy
Total energy consumed by all tasks in a job, in joules. Value may
include a unit prefix (K,M,G,T,P). Note: Only in the case of an
exclusive job allocation does this value reflect the job's real energy
consumption.
ConsumedEnergyRaw
Total energy consumed by all tasks in a job, in joules. Note: Only in
the case of an exclusive job allocation does this value reflect the job's
real energy consumption.
Container Path to OCI Container Bundle requested.
CPUTime Time used (Elapsed time * CPU count) by a job or step in HH:MM:SS format.
CPUTimeRAW
Time used (Elapsed time * CPU count) by a job or step in cpu-seconds.
DBIndex Unique database index for entries in the job table.
DerivedExitCode
The highest exit code returned by the job's job steps (srun invocations).
Following the colon is the signal that caused the process to terminate if
it was terminated by a signal. The DerivedExitCode can be modified by
invoking sacctmgr modify job or the specialized sjobexitmod command.
Elapsed The job's elapsed time.
The format of this field's output is as follows:
[DD-[HH:]]MM:SS
as defined by the following:
DD days
hh hours
mm minutes
ss seconds
ElapsedRaw
The job's elapsed time in seconds.
Eligible When the job became eligible to run. In the same format as End.
End Termination time of the job. The output is of the format
YYYY-MM-DDTHH:MM:SS, unless changed through the SLURM_TIME_FORMAT
environment variable.
ExitCode The exit code returned by the job script or salloc, typically as set by
the exit() function. Following the colon is the signal that caused the
process to terminate if it was terminated by a signal.
Flags Job flags. Current flags are SchedSubmit, SchedMain, SchedBackfill.
GID The group identifier of the user who ran the job.
Group The group name of the user who ran the job.
JobID The identification number of the job or job step.
Regular jobs are in the form:
JobID[.JobStep]
Array jobs are in the form:
ArrayJobID_ArrayTaskID
Heterogeneous jobs are in the form:
HetJobID+HetJobOffset
When printing job arrays, performance of the command can be measurably
improved for systems with large numbers of jobs when a single job ID is
specified. By default, this field size will be limited to 64 bytes. Use
the environment variable SLURM_BITSTR_LEN to specify larger field sizes.
JobIDRaw The identification number of the job or job step. Prints the JobID in
the form JobID[.JobStep] for regular, heterogeneous and array jobs.
JobName The name of the job or job step. The slurm_accounting.log file is a space
delimited file. Because of this if a space is used in the jobname an
underscore is substituted for the space before the record is written to
the accounting file. So when the jobname is displayed by sacct the
jobname that had a space in it will now have an underscore in place of
the space.
Layout What the layout of a step was when it was running. This can be used to
give you an idea of which node ran which rank in your job.
MaxDiskRead
Maximum number of bytes read by all tasks in job.
MaxDiskReadNode
The node on which the maxdiskread occurred.
MaxDiskReadTask
The task ID where the maxdiskread occurred.
MaxDiskWrite
Maximum number of bytes written by all tasks in job.
MaxDiskWriteNode
The node on which the maxdiskwrite occurred.
MaxDiskWriteTask
The task ID where the maxdiskwrite occurred.
MaxPages Maximum number of page faults of all tasks in job.
MaxPagesNode
The node on which the maxpages occurred.
MaxPagesTask
The task ID where the maxpages occurred.
MaxRSS Maximum resident set size of all tasks in job.
MaxRSSNode
The node on which the maxrss occurred.
MaxRSSTask
The task ID where the maxrss occurred.
MaxVMSize Maximum Virtual Memory size of all tasks in job.
MaxVMSizeNode
The node on which the maxvmsize occurred.
MaxVMSizeTask
The task ID where the maxvmsize occurred.
MCSLabel Multi-Category Security (MCS) label associated with the job. Added to a
job when the MCSPlugin is enabled in the slurm.conf.
MinCPU Minimum (system + user) CPU time of all tasks in job.
MinCPUNode
The node on which the mincpu occurred.
MinCPUTask
The task ID where the mincpu occurred.
NCPUS Total number of CPUs allocated to the job. Equivalent to AllocCPUS.
NNodes Number of nodes in a job or step. If the job is running, or ran, this
count will be the number allocated, else the number will be the number
requested.
NodeList List of nodes in job/step.
NTasks Total number of tasks in a job or step.
Partition Identifies the partition on which the job ran.
Priority Slurm priority.
QOS Name of Quality of Service.
QOSRAW Numeric id of Quality of Service.
Reason The last reason a job was blocked from running for something other than
Priority or Resources. This will be saved in the database even if the job
ran to completion.
ReqCPUFreq
Requested CPU frequency for the step, in kHz. Note: This value applies
only to a job step. No value is reported for the job.
ReqCPUFreqGov
Requested CPU frequency governor for the step, in kHz. Note: This value
applies only to a job step. No value is reported for the job.
ReqCPUFreqMax
Maximum requested CPU frequency for the step, in kHz. Note: This value
applies only to a job step. No value is reported for the job.
ReqCPUFreqMin
Minimum requested CPU frequency for the step, in kHz. Note: This value
applies only to a job step. No value is reported for the job.
ReqCPUS Number of requested CPUs.
ReqMem Minimum required memory for the job. It may have a letter appended to it
indicating units (M for megabytes, G for gigabytes, etc.). Note: This
value is only from the job allocation, not the step.
ReqNodes Requested minimum Node count for the job/step.
ReqTres Trackable resources. These are the minimum resource counts requested by
the job/step at submission time. For more details see
AccountingStorageTRES in slurm.conf.
Reservation
Reservation Name.
ReservationId
Reservation Id.
Reserved How much wall clock time was used as reserved time for this job. This is
derived from how long a job was waiting from eligible time to when it
actually started. Format is the same as Elapsed.
ResvCPU How many CPU seconds were used as reserved time for this job. Format is
the same as Elapsed.
ResvCPURAW
How many CPU seconds were used as reserved time for this job. Format is
in processor seconds.
Start Initiation time of the job. In the same format as End.
State Displays the job status, or state. See the JOB STATE CODES section below
for a list of possible states.
If more information is available on the job state than will fit into the
current field width (for example, the UID that CANCELLED a job) the state
will be followed by a "+". You can increase the size of the displayed
state using the "%NUMBER" format modifier described earlier.
NOTE: The RUNNING state will return suspended jobs as well. In order to
print suspended jobs you must request SUSPENDED at a different call from
RUNNING.
NOTE: The RUNNING state will return any jobs completed (cancelled or
otherwise) in the time period requested as the job was also RUNNING
during that time. If you are only looking for jobs that finished, please
choose the appropriate state(s) without the RUNNING state.
Submit The time the job was submitted. In the same format as End.
NOTE: If a job is requeued, the submit time is reset. To obtain the
original submit time it is necessary to use the -D or --duplicate option
to display all duplicate entries for a job.
SubmitLine
The full command issued to submit the job.
Suspended The amount of time a job or job step was suspended. Format is the same as
Elapsed.
SystemComment
The job's comment string that is typically set by a plugin. Can only be
modified by a Slurm administrator.
SystemCPU The amount of system CPU time used by the job or job step. Format is the
same as Elapsed.
NOTE: SystemCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
Timelimit What the timelimit was/is for the job. Format is the same as Elapsed.
TimelimitRaw
What the timelimit was/is for the job. Format is in number of minutes.
TotalCPU The sum of the SystemCPU and UserCPU time used by the job or job step.
The total CPU time of the job may exceed the job's elapsed time for jobs
that include multiple job steps. Format is the same as Elapsed.
NOTE: TotalCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
TresUsageInAve
Tres average usage in by all tasks in job. NOTE: If corresponding
TresUsageInMaxTask is -1 the metric is node centric instead of task.
TresUsageInMax
Tres maximum usage in by all tasks in job. NOTE: If corresponding
TresUsageInMaxTask is -1 the metric is node centric instead of task.
TresUsageInMaxNode
Node for which each maximum TRES usage out occurred.
TresUsageInMaxTask
Task for which each maximum TRES usage out occurred.
TresUsageInMin
Tres minimum usage in by all tasks in job. NOTE: If corresponding
TresUsageInMinTask is -1 the metric is node centric instead of task.
TresUsageInMinNode
Node for which each minimum TRES usage out occurred.
TresUsageInMinTask
Task for which each minimum TRES usage out occurred.
TresUsageInTot
Tres total usage in by all tasks in job.
TresUsageOutAve
Tres average usage out by all tasks in job. NOTE: If corresponding
TresUsageOutMaxTask is -1 the metric is node centric instead of task.
TresUsageOutMax
Tres maximum usage out by all tasks in job. NOTE: If corresponding
TresUsageOutMaxTask is -1 the metric is node centric instead of task.
TresUsageOutMaxNode
Node for which each maximum TRES usage out occurred.
TresUsageOutMaxTask
Task for which each maximum TRES usage out occurred.
TresUsageOutMin
Tres minimum usage out by all tasks in job.
TresUsageOutMinNode
Node for which each minimum TRES usage out occurred.
TresUsageOutMinTask
Task for which each minimum TRES usage out occurred.
TresUsageOutTot
Tres total usage out by all tasks in job.
UID The user identifier of the user who ran the job.
User The user name of the user who ran the job.
UserCPU The amount of user CPU time used by the job or job step. Format is the
same as Elapsed.
NOTE: UserCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
WCKey Workload Characterization Key. Arbitrary string for grouping
orthogonal accounts together.
WCKeyID Reference to the wckey.
WorkDir The directory used by the job to execute commands.
JOB STATE CODES
BF BOOT_FAIL Job terminated due to launch failure, typically due to a hardware
failure (e.g. unable to boot the node or block and the job can not be
requeued).
CA CANCELLED Job was explicitly cancelled by the user or system administrator. The
job may or may not have been initiated.
CD COMPLETED Job has terminated all processes on all nodes with an exit code of
zero.
DL DEADLINE Job terminated on deadline.
F FAILED Job terminated with non-zero exit code or other failure condition.
NF NODE_FAIL Job terminated due to failure of one or more allocated nodes.
OOM OUT_OF_MEMORY Job experienced out of memory error.
PD PENDING Job is awaiting resource allocation.
PR PREEMPTED Job terminated due to preemption.
R RUNNING Job currently has an allocation.
RQ REQUEUED Job was requeued.
RS RESIZING Job is about to change size.
RV REVOKED Sibling was removed from cluster due to other cluster starting the
job.
S SUSPENDED Job has an allocation, but execution has been suspended and CPUs have
been released for other jobs.
TO TIMEOUT Job terminated upon reaching its time limit.
DEFAULT TIME WINDOW
The options --starttime and --endtime define the time window between which sacct is going
to search. For historical and practical reasons their default values (i.e. the default
time window) depends on other options: --jobs and --state.
Depending on if --jobs and/or --state are specified, the default values of --starttime
and --endtime options are:
WITHOUT EITHER --jobs NOR --state specified:
--starttime defaults to Midnight.
--endtime defaults to Now.
WITH --jobs AND WITHOUT --state specified:
--starttime defaults to Epoch 0.
--endtime defaults to Now.
WITHOUT --jobs AND WITH --state specified:
--starttime defaults to Now.
--endtime defaults to --starttime and to Now if --starttime is not specified.
WITH BOTH --jobs AND --state specified:
--starttime defaults to Epoch 0.
--endtime defaults to --starttime or to Now if --starttime is not specified.
NOTE: With -v/--verbose a message about the actual time window in use is shown.
PERFORMANCE
Executing sacct sends a remote procedure call to slurmdbd. If enough calls from sacct or
other Slurm client commands that send remote procedure calls to the slurmdbd daemon come
in at once, it can result in a degradation of performance of the slurmdbd daemon, possibly
resulting in a denial of service.
Do not run sacct or other Slurm client commands that send remote procedure calls to
slurmdbd from loops in shell scripts or other programs. Ensure that programs limit calls
to sacct to the minimum necessary for the information you are trying to gather.
ENVIRONMENT VARIABLES
Some sacct options may be set via environment variables. These environment variables,
along with their corresponding options, are listed below. (Note: Command line options will
always override these settings.)
SACCT_FEDERATION Same as --federation
SACCT_LOCAL Same as --local
SLURM_BITSTR_LEN Specifies the string length to be used for holding a job array's task
ID expression. The default value is 64 bytes. A value of 0 will print
the full expression with any length required. Larger values may
adversely impact the application performance.
SLURM_CONF The location of the Slurm configuration file.
SLURM_DEBUG_FLAGS Specify debug flags for sacct to use. See DebugFlags in the
slurm.conf(5) man page for a full list of flags. The environment
variable takes precedence over the setting in the slurm.conf.
SLURM_TIME_FORMAT Specify the format used to report time stamps. A value of standard,
the default value, generates output in the form
"year-month-dateThour:minute:second". A value of relative returns
only "hour:minute:second" if the current day. For other dates in the
current year it prints the "hour:minute" preceded by "Tomorr"
(tomorrow), "Ystday" (yesterday), the name of the day for the coming
week (e.g. "Mon", "Tue", etc.), otherwise the date (e.g. "25 Apr").
For other years it returns a date month and year without a time (e.g.
"6 Jun 2012"). All of the time stamps use a 24 hour format.
A valid strftime() format can also be specified. For example, a value
of "%a %T" will report the day of the week and a time stamp (e.g. "Mon
12:34:56").
EXAMPLES
This example illustrates the default invocation of the sacct command:
# sacct
Jobid Jobname Partition Account AllocCPUS State ExitCode
---------- ---------- ---------- ---------- ---------- ---------- --------
2 script01 srun acct1 1 RUNNING 0
3 script02 srun acct1 1 RUNNING 0
4 endscript srun acct1 1 RUNNING 0
4.0 srun acct1 1 COMPLETED 0
This example shows the same job accounting information with the brief option.
# sacct --brief
Jobid State ExitCode
---------- ---------- --------
2 RUNNING 0
3 RUNNING 0
4 RUNNING 0
4.0 COMPLETED 0
# sacct --allocations
Jobid Jobname Partition Account AllocCPUS State ExitCode
---------- ---------- ---------- ---------- ------- ---------- --------
3 sja_init andy acct1 1 COMPLETED 0
4 sjaload andy acct1 2 COMPLETED 0
5 sja_scr1 andy acct1 1 COMPLETED 0
6 sja_scr2 andy acct1 18 COMPLETED 2
7 sja_scr3 andy acct1 18 COMPLETED 0
8 sja_scr5 andy acct1 2 COMPLETED 0
9 sja_scr7 andy acct1 90 COMPLETED 1
10 endscript andy acct1 186 COMPLETED 0
This example demonstrates the ability to customize the output of the sacct command. The
fields are displayed in the order designated on the command line.
# sacct --format=jobid,elapsed,ncpus,ntasks,state
Jobid Elapsed Ncpus Ntasks State
---------- ---------- ---------- -------- ----------
3 00:01:30 2 1 COMPLETED
3.0 00:01:30 2 1 COMPLETED
4 00:00:00 2 2 COMPLETED
4.0 00:00:01 2 2 COMPLETED
5 00:01:23 2 1 COMPLETED
5.0 00:01:31 2 1 COMPLETED
This example demonstrates the use of the -T (--truncate) option when used with -S
(--starttime) and -E (--endtime). When the -T option is used, the start time of the job
will be the specified -S value if the job was started before the specified time, otherwise
the time will be the job's start time. The end time will be the specified -E option if the
job ends after the specified time, otherwise it will be the jobs end time.
Without -T (normal operation) sacct output would be like this.
# sacct -S2014-07-03-11:40 -E2014-07-03-12:00 -X -ojobid,start,end,state
JobID Start End State
--------- --------------------- -------------------- ------------
2 2014-07-03T11:33:16 2014-07-03T11:59:01 COMPLETED
3 2014-07-03T11:35:21 Unknown RUNNING
4 2014-07-03T11:35:21 2014-07-03T11:45:21 COMPLETED
5 2014-07-03T11:41:01 Unknown RUNNING
By adding the -T option the job's start and end times are truncated to reflect only the
time requested. If a job started after the start time requested or finished before the
end time requested those times are not altered. The -T option is useful when determining
exact run times during any given period.
# sacct -T -S2014-07-03-11:40 -E2014-07-03-12:00 -X -ojobid,jobname,user,start,end,state
JobID Start End State
--------- --------------------- -------------------- ------------
2 2014-07-03T11:40:00 2014-07-03T11:59:01 COMPLETED
3 2014-07-03T11:40:00 2014-07-03T12:00:00 RUNNING
4 2014-07-03T11:40:00 2014-07-03T11:45:21 COMPLETED
5 2014-07-03T11:41:01 2014-07-03T12:00:00 RUNNING
NOTE: If no -s (--state) option is given sacct will display eligible jobs during the
specified period of time, otherwise it will return jobs that were in the state requested
during that period of time.
This example demonstrates the differences running sacct with and without the --state flag
for the same time period. Without the --state option, all eligible jobs in that time
period are shown.
# sacct -S11:20:00 -E11:25:00 -X -ojobid,start,end,state
JobID Start End State
------------ ------------------- ------------------- ----------
2955 11:15:12 11:20:12 COMPLETED
2956 11:20:13 11:25:13 COMPLETED
With the --state=pending option, only job 2956 will be shown because it had a dependency
on 2955 and was still PENDING from 11:20:00 until it started at 11:21:13. Note that even
though we requested PENDING jobs, the State shows as COMPLETED because that is the current
State of the job.
# sacct --state=pending -S11:20:00 -E11:25:00 -X -ojobid,start,end,state
JobID Start End State
------------ ------------------- ------------------- ----------
2956 11:20:13 11:25:13 COMPLETED
COPYING
Copyright (C) 2005-2007 Copyright Hewlett-Packard Development Company L.P.
Copyright (C) 2008-2010 Lawrence Livermore National Security. Produced at Lawrence
Livermore National Laboratory (cf, DISCLAIMER).
Copyright (C) 2010-2022 SchedMD LLC.
This file is part of Slurm, a resource management program. For details, see
<https://slurm.schedmd.com/>.
Slurm is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
FILES
/etc/slurm.conf
Entries to this file enable job accounting and designate the job accounting log
file that collects system job accounting.
/var/log/slurm_accounting.log
The default job accounting log file. By default, this file is set to read and
write permission for root only.
SEE ALSO
sstat(1), ps (1), srun(1), squeue(1), getrusage (2), time (2)