NAME

       sensors - print sensors information

SYNOPSIS

       sensors [ options ] [ chips ]
       sensors -s [ chips ]
       sensors --bus-list

DESCRIPTION

       sensors is used to show the current readings of all sensor chips.
       sensors -s is used to set all limits as specified in the configuration file.
       sensors --bus-list is used to generate bus statements suitable for the configuration file.

OPTIONS

       -c, --config-file config-file
              Specify  a  configuration  file.  If  no  file is specified, the libsensors default
              configuration file is used. Use `-c /dev/null' to temporarily disable this  default
              configuration file.

       -h, --help
              Print a help text and exit.

       -s, --set
              Evaluate  all  `set'  statements  in  the  configuration file and exit. You must be
              `root' to do this. If this parameter  is  not  specified,  no  `set'  statement  is
              evaluated.

       -A, --no-adapter
              Do not show the adapter for each chip.

       -u     Raw  output.  This  mode  is  suitable for debugging and for post-processing of the
              output by scripts. It is also useful when writing a configuration file  because  it
              shows the raw input names which must be referenced in the configuration file.

       -j     Json output. This mode is suitable for post-processing of the output by scripts.

       -v, --version
              Print the program version and exit.

       -f, --fahrenheit
              Print the temperatures in degrees Fahrenheit instead of Celsius.

       --bus-list
              Generate bus statements suitable for using in sensors.conf. Such bus statements are
              only needed if you have several chips sharing the same address on  different  buses
              of  the  same  type.  As  bus  numbers are usually not guaranteed to be stable over
              reboots, these statements let you refer  to  each  bus  by  its  name  rather  than
              numbers.

FILES

       /etc/sensors3.conf
       /etc/sensors.conf
              The system wide configuration file. See sensors.conf(5) for further details.

SEE ALSO

       sensors.conf(5), sensors-detect(8).

AUTHOR

       Frodo Looijaard and the lm_sensors group https://hwmon.wiki.kernel.org/lm_sensors