Provided by: snek_1.9-1_all bug

NAME

       snek-duemilanove-instal - Install Snek to Duemilanove

SYNOPSIS

       snek-duemilanove-install [OPTION]... [COMMAND]

DESCRIPTION

       snek-duemilanove-install   installs   the  Snek  programming  language  on  an  ATmega328P
       Duemilanove board using the Optiboot boot loader.

OPTIONS

       -hex <snek.hex>
              Specifies the hex file to load to the board. The default is the currently installed
              version of Snek.

       -port <port>
              Specifies the serial port to use. The default is /dev/ttyUSB0.

       -mcu <MCU name>
              Specifies  which  micro controller to expect to find on the board. Some boards have
              m328 while others have m328p. The default is m328, but if you get an error  message
              indicating a mismatch, you can try the other.

OPTIBOOT

       Snek  for the Duemilanove requires Optiboot. If your board does not already have Optiboot,
       you can use  the  Arduino  IDE  to  install  Optiboot  on  your  Duemilanove.  Follow  the
       instructions  on  the Optiboot web site: https://github.com/Optiboot/optiboot to learn how
       to do that.

AUTHOR

       Keith Packard

                                     snek-duemilanove-install         SNEK-DUEMILANOVE-INSTALL(1)