Provided by: hylafax-client_6.0.7-5build1_amd64 bug

NAME

       textfmt - convert text to POSTSCRIPT® for facsimile transmission

SYNOPSIS

       /usr/sbin/textfmt [ options ] [ files...  ]

DESCRIPTION

       textfmt  takes  ASCII  text  and  generates  formatted  POSTSCRIPT® suitable for facsimile
       transmission.  It is usually invoked as a filter program by the sendfax(1) program.  Input
       files  may  be  specified  on the command line.  If none are given, then textfmt will read
       from standard input.

       By default, textfmt will generate an output document  that  is  formatted  with  a  single
       vertical column of text, set in a 10 point fixed width font, and with a simple page header
       that consists of the file name, last modification date, and the page  number.   Pages  are
       generated  according to the default page dimensions (see pagesizes(5)).  When multi-column
       output is requested, text is set by default with a 7 point fixed width font.

OPTIONS

       Many of the options to textfmt have been chosen for compatibility with the Adobe  Systems'
       enscript program; other options are for features that are not provided by enscript.

       -1     Set text in one column.

       -2     Set text two columns.

       -B     Suppress page headers.

       -c     Clip long text lines instead of wrapping them at page margins.

       -D     Do not use ISO 8859-1 encoding in the generated POSTSCRIPT.

       -f font
              Set text using the POSTSCRIPT font named font.

       -F fontdir(s)
              Path(s) to afm font files.

       -G     Use a gaudy-style page header.

       -m cols
              Set text in cols columns.

       -Ml=#,r=#,t=#,b=#
              Set  the  page  margins;  the default margins are: left and right .25 inch, top .85
              inch, bottom .5 inch.

       -o     Draw an outline around each column of text; the specified number defines the  width
              of the line that is drawn.

       -p pts Set text using fonts with pts point size (integer only).

       -r     Set pages rotated by 90 degrees (in ``Landscape mode'').

       -R     Set pages unrotated (in ``Portrait mode'').

       -s size
              Set  the output size according to the named page size.  Images are normally created
              with a system-default page size (usually letter-size pages, 8.5" by 11", for  sites
              in  North  America).   Alternate page sizes are specified symbolically using either
              the name or abbreviation of an entry in the pagesizes(5) database;  e.g.   a3  (ISO
              A3),  a4  (ISO  A4),  a5 (ISO A5), a6 (ISO A6), b4 (ISO B4), na-let (North American
              Letter), us-leg  (American  Legal),  us-led  (American  Ledger),  us-exe  (American
              Executive), jp-let (Japanese Letter), and jp-leg (Japanese Legal).  Comparisons are
              case-insensitive and any match of  a  substring  of  the  full  page-size  name  is
              sufficient; e.g. ``legal'' would match ``American Legal''.

       -U     Reverse  collate  pages;  that  is the last page will appear first in the resultant
              POSTSCRIPT, then the next-to-last page, etc.

       -V spacing
              Set the line height; the default height is 1.2 x point size.

CONFIGURATION PARAMETERS

       textfmt  reads  configuration  information  from  the  files  /etc/hylafax/hyla.conf,  and
       ~/.hylarc;  in  that  order.   Configuration  files  follow  the  conventions described in
       hylafax-client(1).  The following configuration parameters are recognized:
       Tag  Type Default   Description
       Columns   integer   1    number of columns in formatted output
       GaudyHeaders   boolean   No   enable/disable guady page headers
       FontMap       string  see below location of ghostscript Fontmap file
       FontPath      string  see below directory for font metric files
       ISO8859   boolean   Yes  use ISO 8859-1 character encoding
       LineWrap  boolean   Yes  wrap/truncate text lines
       Orientation    string    portrait  orientation of text on page
       OutlineMargin  inches    0    width of outline line
       PageCollation  string    forward   collate pages in forward or reverse direction
       PageHeaders    boolean   Yes  enable/disable page headers
       PageHeight     float     -    output page height
       PageMargins    string    see below margins for formatted page
       PageSize  string    default   output page size from database
       PageWidth float     -    output page width
       TabStop   integer   8    inter-stop setting in characters
       TextFont  string    Courier   name of font for setting text
       TextLineHeight inches    -    text formatting line height control
       TextPointSize  inches    see below size to use in setting text

       The configuration parameters are explained below.  Most parameters correspond to a command
       line  option.   Parameter values identified above as inches are converted according to the
       following conventions (where ``#.##'' is a decimal number):
              #.##bp    big point (1in = 72bp)
              #.##cc    cicero (1cc = 12dd)
              #.##cm    centimeter
              #.##dd    didot point (1157dd = 1238pt)
              #.##in    inch
              #.##mm    millimeter (10mm = 1cm)
              #.##pc    pica (1pc = 12pt)
              #.##pt    point (72.27pt = 1in)
              #.##sp    scaled point (65536sp = 1pt)

       Unit names can be upper or lower case but no white space is permitted between  the  number
       and the unit.  Values specified with no unit are interpreted as big points.

       Columns        The number of columns to set text in.  (Equivalent to the -m option.)

       FontMap        The  directory  or  directories  where  the ghostscript Fontmap file(s) are
                      located; multiple paths are separated by a colon (":"). The  Fontmap  table
                      allows  the translation of the descriptive name of the font (as used by the
                      TextFont parameter) to the ghostscript font filenames. Setting the value to
                      ""   (zero   length   string)   disables   this  translation  and  provides
                      functionality with RIPs other than ghostscript.

       FontPath       The path where Adobe Font  Metric  (AFM)  files  are  located;  by  default
                      /usr/share/fonts/type1/gsfonts. (Equivalent to the -F option.)

       GaudyHeaders   Control  whether  or  not to use a gaudy-style page header.  (Equivalent to
                      the -G option.)

       ISO8859        Control the  use  of  ISO  8859-1  encoding  in  the  generated  POSTSCRIPT
                      (Equivalent to the -D option.)

       LineWrap       Control  whether long text lines are wrapper or truncated at the right hand
                      margin.  (Equivalent to the -c option.)

       Orientation    Control  whether  pages  are  oriented  horizontally   (``landscape'')   or
                      vertically (``portrait'').  (Equivalent to the -r and -R options.)

       OutlineMargin  Control whether columns of text have a line drawn around them and the width
                      of the line.  Setting this parameter to 0 disables  outlines.   (Equivalent
                      to the -o option.)

       PageCollation  Control whether the output file has pages collated in the same order as the
                      input file (``forward'') or in reverse order (``reverse).   (Equivalent  to
                      the -U option.)

       PageHeaders    Control whether page headers are generated.  (Equivalent to the -B option.)

       PageHeight     Set the output page height in inches (in inches).

       PageMargins    Set  the output page dimensions.  Dimensions are specified as string of the
                      form: ``l=#,r=#,t=#,b=#'' where l indicates the left  margin,  r  indicates
                      the  right  margin,  t  indicates  the  top  margin, b indicates the bottom
                      margin, and numbers are interpreted  as  inches.   (Equivalent  to  the  -M
                      option.)

       PageSize       Set the output page dimensions by name.  (Equivalent to the -s option.)

       PageWidth      Set the output page width in inches (in inches).

       TabStop        Set the tab stop distance; in characters.

       TextFont       Set  the  descriptive name of font to use for setting text.  (Equivalent to
                      the -f option.)

       TextLineHeight Set the vertical text line height  and  spacing.   (Equivalent  to  the  -V
                      option.)

       TextPointSize  Set the point size to use in setting text.  (Equivalent to the -p option.)

NOTES

       If  textfmt  is  unable  to  locate font metric information for a font, then it will use a
       fixed-width metric that is 60% of the text point size; this metric will  almost  certainly
       result in incorrectly formatted POSTSCRIPT.

       textfmt is distantly related to the lptops program written by Don Beebe.

FILES

       /etc/hylafax/hyla.conf    system-wide configuration file
       ~/.hylarc                 per-user configuration file
       /etc/hylafax/pagesizes    page size database
       /usr/share/fonts/type1/gsfonts   font metric files

SEE ALSO

       hylafax-client(1), sendfax(1), pagesizes(5)

                                           May 17, 1996                                TEXTFMT(1)