Provided by: valentina_0.7.52~dfsg-1_amd64 bug

NAME

       Valentina - Pattern making program.

SYNOPSIS

       valentina [options] file

DESCRIPTION

       Valentina  is  a cross-platform patternmaking program which allows designers to create and
       model patterns of clothing. This software allows pattern creation, using either  multisize
       sizing  tables  or  an  individual’s  set of measurements. It blends new technologies with
       traditional methods to create a unique pattern making tool.

OPTIONS

       -h, --help
              Displays this help.

       -v, --version
              Displays version information.

       -b, --basename <The base filename of layout files>
              The base filename of exported layout files. Use it to enable console export mode.

       -d, --destination <The destination folder>
              The path to output destination folder.  By  default  the  directory  at  which  the
              application was started. The path must exists and be reachable for the program.

       -m, --mfile <The measure file>
              Path to custom measure file (export mode).

       -n, --time <Time>
              <Time>  in  minutes given for the algorithm to find best layout (export mode). Time
              must be in range from 1 minute to 60 minutes. Default value 1 minute.

       --coefficient <Coefficient>
              Set layout efficiency coefficient (export mode). Layout efficiency  coefficient  is
              the ratio of the area occupied by the pieces to the bounding rect of all pieces. If
              nesting reaches required level the process stops. If value is 0 no  check  will  be
              made. Coefficient must be in range from 0 to 100. Default value 0.

       -f, --format <Format number>
              Number corresponding to output format (default = 0, export mode):
              * Svg files (*.svg) = 0,
              * PDF files (*.pdf) = 1,
              * Image files (*.png) = 2,
              * Wavefront OBJ (*.obj) = 3,
              * PS files (*.ps) = 4,
              * EPS files (*.eps) = 5,
              * AutoCAD DXF R10 (flat) files (*.dxf) = 6,
              * AutoCAD DXF R11/12 (flat) files (*.dxf) = 7,
              * AutoCAD DXF R13 (flat) files (*.dxf) = 8,
              * AutoCAD DXF R14 (flat) files (*.dxf) = 9,
              * AutoCAD DXF 2000 (flat) files (*.dxf) = 10,
              * AutoCAD DXF 2004 (flat) files (*.dxf) = 11,
              * AutoCAD DXF 2007 (flat) files (*.dxf) = 12,
              * AutoCAD DXF 2010 (flat) files (*.dxf) = 13,
              * AutoCAD DXF 2013 (flat) files (*.dxf) = 14,
              * AutoCAD DXF R10 AAMA files (*.dxf) = 15,
              * AutoCAD DXF R11/12 AAMA files (*.dxf) = 16,
              * AutoCAD DXF R13 AAMA files (*.dxf) = 17,
              * AutoCAD DXF R14 AAMA files (*.dxf) = 18,
              * AutoCAD DXF 2000 AAMA files (*.dxf) = 19,
              * AutoCAD DXF 2004 AAMA files (*.dxf) = 20,
              * AutoCAD DXF 2007 AAMA files (*.dxf) = 21,
              * AutoCAD DXF 2010 AAMA files (*.dxf) = 22,
              * AutoCAD DXF 2013 AAMA files (*.dxf) = 23,
              * AutoCAD DXF R10 ASTM файли (*.dxf) = 24,
              * AutoCAD DXF R11/12 ASTM файли (*.dxf) = 25,
              * AutoCAD DXF R13 ASTM файли (*.dxf) = 26,
              * AutoCAD DXF R14 ASTM файли (*.dxf) = 27,
              * AutoCAD DXF 2000 ASTM файли (*.dxf) = 28,
              * AutoCAD DXF 2004 ASTM файли (*.dxf) = 29,
              * AutoCAD DXF 2007 ASTM файли (*.dxf) = 30,
              * AutoCAD DXF 2010 ASTM файли (*.dxf) = 31,
              * AutoCAD DXF 2013 ASTM файли (*.dxf) = 32,
              * PDF tiled files (*.pdf) = 33,
              * TIFF файли (*.tif) = 35.

       --bdxf Export dxf in binary form.

       --text2paths
              Export text as paths.

       --exportOnlyDetails
              Export  only  details.  Export  details as they positioned in the details mode. Any
              layout related options will be ignored.

       --exportSuchDetails <The name regex>
              Export only details that match a piece name regex.

       --dimensionA <The dimension A base>
              Set base for dimension A in the multisize measurements units (export mode).

       --dimensionB <The dimension B base>
              Set base for dimension B in the multisize measurements units (export mode).

       --dimensionC <The dimension C base>
              Set base for dimension C in the multisize measurements units (export mode).

       --userMaterial <User material>
              Use this option to override user material defined in pattern. The value must be  in
              form  <number>@<user matrial name>. The number should be in range from 1 to 20. For
              example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode.

       -p, --pageformat <Template number>
              Number corresponding to layout page template (default = 0, export mode):
              * A0 = 0,
              * A1 = 1,
              * A2 = 2,
              * A3 = 3,
              * A4 = 4,
              * Letter = 5,
              * Legal = 6,
              * Tabloid = 7,
              * Roll 24in = 8,
              * Roll 30in = 9,
              * Roll 36in = 10,
              * Roll 42in = 11,
              * Roll 44in = 12,
              * Roll 48in = 13,
              * Roll 62in = 14,
              * Roll 72in = 15.

       --landscapeOrientation
              Switch page template orientation to landscape (export mode). This option has effect
              only for one of predefined page templates.

       -W, --pagew <The page width>
              Page  width  in  current  units like 12.0 (cannot be used with “pageformat”, export
              mode).

       -H, --pageh <The page height>
              Page height in current units like 12.0 (cannot be used  with  “pageformat”,  export
              mode).

       -U, --pageunits <The measure unit>
              Page measure units (export mode). Valid values: mm, cm, inch, px.

       -i, --ignoremargins
              Ignore  margins  printing  (export  mode). Use if need full paper space. In case of
              later printing you must account for the margins himself.

       -L, --lmargin <The left margin>
              Page left margin in current units like 3.0 (export mode). If not set will  be  used
              value from default printer. Or 0 if none printers was found.

       -R, --rmargin <The right margin>
              Page  right margin in current units like 3.0 (export mode). If not set will be used
              value from default printer. Or 0 if none printers was found.

       -T, --tmargin <The top margin>
              Page top margin in current units like 3.0 (export mode). If not set  will  be  used
              value from default printer. Or 0 if none printers was found.

       -B, --bmargin <The bottom margin>
              Page bottom margin in current units like 3.0 (export mode). If not set will be used
              value from default printer. Or 0 if none printers was found.

       --xscale <Horizontal scale>
              Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode).

       --yscale <Vertical scale>
              Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode).

       --followGrainline
              Order detail to follow grainline direction (export mode).

       --manualPriority
              Follow manual priority over priority by square (export mode).

       --nestQuantity
              Nest quantity copies of each piece (export mode).

       -c, --crop
              Auto crop unused length (export mode).

       --cropWidth
              Auto crop unused width (export mode).

       -u, --unite
              Unite pages if possible  (export  mode).  Maximum  value  limited  by  QImage  that
              supports only a maximum of 32768x32768 px images.

       --preferOneSheetSolution
              Prefer one sheet layout solution (export mode).

       -S, --savelen
              Save  length of the sheet if set (export mode). The option tells the program to use
              as much as possible width of sheet. Quality of a layout  can  be  worse  when  this
              option was used.

       -l, --layounits <The unit>
              Layout units (as paper's one except px, export mode).

       -G, --gapwidth <The gap width>
              The  layout  gap  width  x2,  measured  in layout units (export mode). Set distance
              between details and a detail and a sheet.

       -g, --groups <Grouping type>
              Sets layout groupping cases (export mode):
              * Three groups: big, middle, small = 0,
              * Two groups: big, small = 1,
              * Descending area = 2.

       -t, --test
              Run the program in a test mode. The program in this mode  loads  a  single  pattern
              file  and  silently  quit  without  showing  the main window. The key have priority
              before key “basename”.

       --pedantic
              Make all parsing warnings into errors. Have effect only in  console  mode.  Use  to
              force Valentina to immediately terminate if a pattern contains a parsing warning.

       --no-scaling
              Disable  high dpi scaling. Call this option if has problem with scaling (by default
              scaling enabled).  Alternatively  you  can  use  the  QT_AUTO_SCREEN_SCALE_FACTOR=0
              environment variable.

       --csvWithHeader
              Export to csv with header. By default disabled.

       --csvCodec <Codec name>
              Specify  codec that will be used to save data. List of supported codecs provided by
              Qt. Default value depend from system. On Windows, the codec  will  be  based  on  a
              system  locale.  On Unix systems, the codec will might fall back to using the iconv
              library if no builtin codec for the locale  can  be  found.  Valid  values  usually
              these:
              * US-ASCII,
              * US-ASCII,
              * ISO-8859-1,
              * ISO-8859-2,
              * ISO-8859-3,
              * ISO-8859-4,
              * ISO-8859-5,
              * ISO-8859-6,
              * ISO-8859-7,
              * ISO-8859-8,
              * ISO-8859-9,
              * ISO-8859-10,
              * ISO-2022-JP-1,
              * Shift_JIS,
              * EUC-JP,
              * US-ASCII,
              * windows-949,
              * ISO-2022-KR,
              * windows-949,
              * ISO-2022-JP,
              * ISO-2022-JP-2,
              * GBK,
              * ISO-8859-6,
              * ISO-8859-6,
              * ISO-8859-8,
              * ISO-8859-8,
              * ISO-2022-CN,
              * ISO-2022-CN-EXT,
              * UTF-8,
              * ISO-8859-13,
              * ISO-8859-14,
              * ISO-8859-15,
              * GBK,
              * GB18030,
              * UTF-16,
              * UTF-32,
              * SCSU,
              * UTF-7,
              * UTF-16BE,
              * UTF-16LE,
              * UTF-16,
              * CESU-8,
              * UTF-32,
              * UTF-32BE,
              * UTF-32LE,
              * BOCU-1,
              * hp-roman8,
              * Adobe-Standard-Encoding,
              * IBM850,
              * IBM862,
              * IBM-Thai,
              * Shift_JIS,
              * GBK,
              * Big5,
              * macintosh,
              * IBM037,
              * IBM273,
              * IBM277,
              * IBM278,
              * IBM280,
              * IBM284,
              * IBM285,
              * IBM290,
              * IBM297,
              * IBM420,
              * IBM424,
              * IBM437,
              * IBM500,
              * cp851,
              * IBM852,
              * IBM855,
              * IBM857,
              * IBM860,
              * IBM861,
              * IBM863,
              * IBM864,
              * IBM865,
              * IBM868,
              * IBM869,
              * IBM870,
              * IBM871,
              * IBM918,
              * IBM1026,
              * KOI8-R,
              * HZ-GB-2312,
              * IBM866,
              * IBM775,
              * KOI8-U,
              * IBM00858,
              * IBM01140,
              * IBM01141,
              * IBM01142,
              * IBM01143,
              * IBM01144,
              * IBM01145,
              * IBM01146,
              * IBM01147,
              * IBM01148,
              * IBM01149,
              * Big5-HKSCS,
              * IBM1047,
              * windows-1250,
              * windows-1251,
              * windows-1252,
              * windows-1253,
              * windows-1254,
              * windows-1255,
              * windows-1256,
              * windows-1257,
              * windows-1258,
              * TIS-620,
              * TSCII.

       --csvSeparator <Separator character>
              Specify csv separator character. Default value is ','. Valid characters:
              * 'Tab',
              * ';',
              * 'Space',
              * ','.

       --csvExportFM <Path to csv file>
              Calling  this command enable exporting final measurements. Specify path to csv file
              with final measurements. The path must contain path to directory and name of  file.
              It  can  be  absolute  or relatetive. In case of relative path will be used current
              working directory to calc a destination path.

       --tiledPageformat <Template number>
              Number corresponding to tiled pdf page template (default  =  0,  export  mode  with
              tiled pdf format):
              * A0 = 0,
              * A1 = 1,
              * A2 = 2,
              * A3 = 3,
              * A4 = 4,
              * Letter = 5,
              * Legal = 6,
              * Tabloid = 7.

       --tiledlmargin <The left margin>
              Tiled  page left margin in current units like 3.0 (export mode). If not set will be
              used default value 1 cm.

       --tiledrmargin <The right margin>
              Tiled page right margin in current units like 3.0 (export mode). If not set will be
              used default value 1 cm.

       --tiledtmargin <The top margin>
              Tiled  page  top margin in current units like 3.0 (export mode). If not set will be
              used value default value 1 cm.

       --tiledbmargin <The bottom margin>
              Tiled page bottom margin in current units like 3.0 (export mode). If not  set  will
              be used value default value 1 cm.

       --tiledLandscape
              Set  tiled  page  orienatation to landscape (export mode). Default value if not set
              portrait.

       Arguments:
              filename - a pattern file.

EXAMPLE

       Export a layout to tiled PDF:
              valentina  --basename  test  --destination  /home/user/tiled  --format  33  --mfile
              /home/user/measurements/m1.vit --pedantic

       Export pieces to DXF AAMA bypassing the layout stage:
              valentina   --basename  test  --destination  /home/user/aama  --format  18  --mfile
              /home/user/measurements/m1.vit --exportOnlyDetails --pedantic --exportSuchDetails .

       Export a layout to tiled PDF with final measurements:
              valentina  --basename  test  --destination  /home/user/tiled  --format  33  --mfile
              /home/user/measurements/m1.vit --pedantic --csvExportFM /home/user/tiled/test.csv

AUTHOR

       This  manual  page  was  written  by Roman Telezhynskyi <dismine@gmail.com>

SEE ALSO

       valentina-tape(1)