Provided by: vis_0.8-1_amd64 bug

NAME

     vis — a highly efficient text editor

SYNOPSIS

     vis [-v] [+command] [--] [files ...]

DESCRIPTION

     vis is a highly efficient screen-oriented text editor combining the strengths of both vi(m)
     and sam.  This manual page is intended for users already familiar with vi/sam.  Anyone else
     should almost certainly read a good tutorial on either editor before this manual page.  The
     following options are available:

     -v      Print version information and exit.

     +command
             Execute command after loading file.

     --      Denotes the end of the options.  Arguments after this will be handled as a file
             name.

     The special file - instructs vis to read from standard input in which case :wq will write to
     standard output, thereby enabling usage as an interactive filter.

     If standard input is redirected and all input is consumed, vis will open /dev/tty to gather
     further commands.  Failure to do so results in program termination.

   Selections
     vis uses selections as core editing primitives.  A selection is a non-empty, directed range
     with two endpoints called cursor and anchor.  A selection can be anchored in which case the
     anchor remains fixed while only the position of the cursor is adjusted.  For non-anchored
     selections both endpoints are updated.  A singleton selection covers one character on which
     both cursor and anchor reside.  There always exists a primary selection which remains
     visible (i.e. changes to its position will adjust the viewport).

   Modes
     vis employs the same modal editing approach as vi.  It supports a ‘normal’, ‘operator
     pending’, ‘insert’, ‘replace’ and ‘visual’ (in both line and character wise variants) mode.
     The visual block and ex modes are deliberately not implemented, instead vis has built in
     support for multiple selections and an interactive variant of the structural regular
     expression based command language of sam.

     In normal mode all selections are non-anchored and reduced to a single character.

   Undo/Redo
     vis uses an undo tree to keep track of text revisions.  The u (undo) and ⟨C-r⟩ (redo)
     commands can be used to traverse the tree along the main branch.  g+ and g- traverse the
     history in chronological order.  The :earlier and :later commands provide means to restore
     the text to an arbitrary state.

   Marks
     A mark associates a symbolic name to a set of selections.  A stored selection becomes
     invalid when its delimiting boundaries change in the underlying buffer.  If said changes are
     later undone the mark becomes valid again.  m sets a mark, M restores it.  For example, 'am
     sets the mark a while 'aM restores it.

     Available marks are:

     ''      default mark

     '^      active selections when leaving visual mode

     'a'z   general purpose marks

     No marks across files are supported.  Marks are not preserved over editing sessions.

   Jump list
     A per window, fixed sized file local jump list exists which stores marks (i.e. set of
     selections).

     g<      jump backward

     g>      jump forward

     gs      save currently active selections

   Registers
     Registers are named lists of text.  Uninitialized register slots default to the empty
     string.  Available registers are:

     ""      default register

     "a"z   general purpose registers

     "A"Z   append to corresponding general purpose register

     "*, "+  system clipboard integration via shell script vis-clipboard(1)

     "0      yank register, most recently yanked range

     "1"9

     "&      sub expression matches of most recent x or y command

     "/      search register, most recently used search pattern

     ":      command register, most recently executed command

     "_      black hole (/dev/null) register, ignore content is always empty

     "#      selection number (readonly)

     If no explicit register is specified the default register is used.

   Macros
     The general purpose registers "a"z can be used to record macros.  Use one of "A"Z to
     append to an existing macro.  q starts a recording, @ plays it back.  @@ refers to the most
     recently recorded macro.  @: repeats the last :-command. @/ is equivalent to n in normal
     mode.  These operations always use the first register slot.

   Encoding, Tab and Newline handling
     vis always assumes the input file to be UTF-8 encoded with \n line endings.  If you wish to
     edit files with legacy encodings or non-Unix line endings, use iconv(1) and dos2unix(1) to
     convert them as needed.  ⟨Tab⟩ can optionally be expanded to a configurable number of spaces
     (see SET OPTIONS).

   Mouse support
     The mouse is currently not used at all.

SAM COMMANDS

     vis supports an interactive variant of the structural regular expression based command
     language introduced by sam(1).

   Regular expressions
     vis currently defers regular expression matching to the underlying C library.  It uses what
     POSIX refers to as “Extended Regular Expressions” as described in regex(7).  The anchors ^
     and $ match the beginning / end of the range they are applied to.  Additionally \n and \t
     may be used to refer to newlines and tabs, respectively.  The . atom matches any character
     except newline.  The empty regular expression stands for the last complete expression
     encountered.

   Addresses
     An address identifies a substring (or range) in a file.  In the following “character n”
     means the null string after the n-th character in the file, with 1 the first character in
     the file.  “Line n” means the n-th match, starting at the beginning of the file, of the
     regular expression “.*\n?”.

     All windows always have at least one current substring which is the default address.  In sam
     this is referred to as dot.  In vis multiple “dots” (or selections) can exist at the same
     time.

   Simple addresses
     #n      The empty string after character n; #0 is the beginning of the file.

     n       Line n.

     /regexp/

     ?regexp?
             The substring that matches the regular expression, found by looking towards the end
             (/) or beginning (?) of the file.  The search does not wrap around when hitting the
             end (start) of the file.

     0       The string before the first full line.  This is not necessarily the null string; see
             + and - below.

     $       The null string at the end of the file.

     .       Dot, the current range.

     'm      The mark m in the file.

   Compound addresses
     In the following, a1 and a2 are addresses.

     a1+a2   The address a2 evaluated starting at the end of a1.

     a1-a2   The address a2 evaluated looking the reverse direction starting at the beginning of
             a1.

     a1,a2   The substring from the beginning of a1 to the end of a2.  If a1 is missing, 0 is
             substituted.  If a2 is missing, $ is substituted.

     a1;a2   Like a1,a2 but with a2 evaluated at the end of, and range set to, a1.

     The operators + and - are high precedence, while , and ; are low precedence.

     In both + and - forms, if a2 is a line or character address with a missing number, the
     number defaults to 1.  If a1 is missing, . is substituted.  If both a1 and a2 are present
     and distinguishable, + may be elided.  a2 may be a regular expression; if it is delimited by
     ? characters, the effect of the + or - is reversed.  The % sign is an alias for , and hence
     0,$.  It is an error for a compound address to represent a malformed substring.

   Commands
     In the following, text demarcated by slashes represents text delimited by any printable
     ASCII character except alphanumerics.  Any number of trailing delimiters may be elided, with
     multiple elisions then representing null strings, but the first delimiter must always be
     present.  In any delimited text, newline may not appear literally; \n and \t may be typed
     for newline and tab; \/ quotes the delimiter, here /.  An ampersand & and \n, where n is a
     digit (1–9) are replaced by the corresponding register.  Backslash is otherwise interpreted
     literally.

     Most commands may be prefixed with an address to indicate their range of operation.  If a
     command takes an address and none is supplied, a default address is used.  In normal mode
     this equates to the character the selection is currently over.  If only one selection exists
     x and y default to the whole file 0,$.  In normal mode the write commands w and wq always
     apply to the whole file.  Commands are executed once for every selection.  In visual mode
     the commands are applied to every selection as if an implicit x command, matching the
     existing selections, was present.

     In the description, “range” is used to represent whatever address is supplied.

     Many commands create new selections as a side effect when issued from a visual mode.  If so,
     it is always to the “result” of the change: the new text for an insertion, the empty string
     for a deletion, the command output of a filter etc.  If after a successful command execution
     no selections remain, the editor will switch to normal mode, otherwise it remains in visual
     mode.  This allows interactive refinements of ranges.

   Text commands
     a[count]/text/
             Insert the text count times into the file after the range.

             May also be written as

                    a
                    lines
                    of
                    text
                    .

     c or i  Same as a, but c replaces the text, while i inserts before the range.

     d       Delete the text in range.

   Display commands
     p       Create a new selection for the range.

   I/O commands
     e[!] [file name]
             Replace the file by the contents of the named external file.  If no file name is
             given, reload file from disk.

     r file name
             Replace the text in the range by the contents of the named external file.

     w[!] [file name]
             Write the range (default 0,$) to the named external file.

     wq[!] [file name]
             Same as w, but close file afterwards.

     If the file name argument is absent from any of these, the current file name is used.  e
     always sets the file name, w will do so if the file has no name.  Forcing the e command with
     ! will discard any unsaved changes.  Forcing w will overwrite the file on disk even if it
     has been externally modified since loading it.  Write commands with a non-default addresses
     and no file name are destructive and need always to be forced.

     < shell command
             Replace the range by the standard output of the shell command.

     > shell command
             Sends the range to the standard input of the shell command.

     | shell command
             Send the range to the standard input, and replace it by the standard output, of the
             shell command.

     ! shell command
             Run interactive shell command, redirect keyboard input to it.

     cd directory
             Change working directory.  If no directory is specified, $HOME is used.

     In any of <, >, |, or !, if the shell command is omitted, the last shell command (of any
     type) is substituted.  Unless the file being edited is unnamed, all these external commands
     can refer to its absolute path and file name through the vis_filepath and vis_filename
     environment variables.

   Loops and conditionals
     x/regexp/ [command]
             For each match of the regular expression in the range, run the command with range
             set to the match.  If the regular expression and its slashes are omitted, /.*\n/ is
             assumed.  Null string matches potentially occur before every character of the range
             and at the end of the range.

             The "1"9 and "& registers are updated with the (sub) expression matches of the
             pattern.

     y/regexp/ [command]
             Like x, but run the command for each substring that lies before, between, or after
             the matches that would be generated by x.  There is no default behavior.  Null
             substrings potentially occur before every character in the range.

     X/regexp/ command
             For each file whose file name matches the regular expression, make that the current
             file and run the command.  If the expression is omitted, the command is run in every
             file.

     Y/regexp/ command
             Same as X, but for files that do not match the regular expression, and the
             expression is required.

     g[count][/regexp/] command

     v[count][/regexp/] command
             If the count range contains (g) or does not contain (v) a match for the expression,
             run command on the range.

             The count specifier has the following format, where n and m are integers denoting
             the ranges.

             n,m     The closed interval from n to m.  If n is missing, 1 is substituted.  If m
                     is missing,  is substituted.  Negative values are interpreted relative to
                     the last range.

             %n      Matches every n-th range.

     These may be nested arbitrarily deeply.  An empty command in an x or y defaults to p.  X, Y,
     g and v do not have defaults.

   Grouping and multiple changes
     Commands may be grouped by enclosing them in curly braces.  Semantically, the opening brace
     is like a command: it takes an (optional) address and runs each sub-command on the range.
     Commands within the braces are executed sequentially, but changes made by one command are
     not visible to other commands.

     When a command makes a number of changes to a file, as in x/re/ c/text/, the addresses of
     all changes are computed based on the initial state.  If the changes are non-overlapping,
     they are applied in the specified order.  Conflicting changes are rejected.

     Braces may be nested arbitrarily.

VI(M) KEY BINDINGS

     In the following sections angle brackets are used to denote special keys.  The prefixes C-,
     S-, and M- are used to refer to the ⟨Ctrl⟩, ⟨Shift⟩ and ⟨Alt⟩ modifiers, respectively.

     All active key bindings can be listed at runtime using the :help command.

   Operators
     Operators perform a certain operation on a text range indicated by either a motion, a text
     object or an existing selection.

     When used in normal mode, the following operators wait for a motion, putting vis into
     operator pending mode.
     c           change, delete range and enter insert mode
     d           delete, cut range to register
     <           shift-left, decrease indent
     >           shift-right, increase indent
     y           yank, copy range to register

     When used in normal mode, the following actions take effect immediately.
     =           format, filter range through fmt(1)
     gu          make lowercase
     gU          make uppercase
     g~          swap case
     J           join lines, insert spaces in between
     gJ          join lines remove any delimiting white spaces
     p           put register content after cursor
     P           put register content before cursor

   Motions
     Motions take an initial file position and transform it to a destination file position,
     thereby defining a range.

     0           start of line
     b           previous start of a word
     B           previous start of a WORD
     $           end of line
     e           next end of a word
     E           next end of a WORD
     Fchar⟩     to next occurrence of ⟨char⟩ to the left
     fchar⟩     to next occurrence of ⟨char⟩ to the right
     ^           first non-blank of line
     g0          begin of display line
     g$          end of display line
     ge          previous end of a word
     gE          previous end of a WORD
     gg          begin of file
     G           goto line or end of file
     gj          display line down
     gk          display line up
     gh          codepoint left
     gl          codepoint right
     gH          byte left
     gL          byte right
     g_          last non-blank of line
     gm          middle of display line
     g|          goto column
     h           char left
     H           goto top/home line of window
     j           line down
     k           line up
     l           char right
     L           goto bottom/last line of window
     %           match bracket, quote or backtick
     }           next paragraph
     )           next sentence
     N           repeat last search backwards
     n           repeat last search forward
     [{          previous start of block
     ]}          next start of block
     [(          previous start of parentheses pair
     ])          next start of parentheses pair
     {           previous paragraph
     (           previous sentence
     ;           repeat last to/till movement
     ,           repeat last to/till movement but in opposite direction
     #           search word under selection backwards
     *           search word under selection forwards
     Tchar⟩     till before next occurrence of ⟨char⟩ to the left
     tchar⟩     till before next occurrence of ⟨char⟩ to the right
     ?pattern    to next match of pattern in backward direction
     /pattern    to next match of pattern in forward direction
     w           next start of a word
     W           next start of a WORD

   Text objects
     Text objects take an initial file position and transform it to a range where the former does
     not necessarily have to be contained in the latter.  All of the following text objects are
     implemented in an inner variant (prefixed with i) where the surrounding white space or
     delimiting characters are not part of the resulting range and a normal variant (prefixed
     with a) where they are.

     w           word
     W           WORD
     s           sentence
     p           paragraph
     [, ], (, ), {, }, <, >, ", ', `
                 block enclosed by these symbols

     Further available text objects include:
     gn          matches the last used search term in forward direction
     gN          matches the last used search term in backward direction
     al          current line
     il          current line without leading and trailing white spaces

   Multiple Selections
     vis supports multiple selections with immediate visual feedback.  There always exists one
     primary selection located within the current view port.  Additional selections can be
     created as needed.  If more than one selection exists, the primary one is styled
     differently.

     To manipulate selections use in normal mode:

     ⟨C-k⟩       create count new selections on the lines above
     ⟨C-M-k⟩     create count new selections on the lines above the first selection
     ⟨C-j⟩       create count new selections on the lines below
     ⟨C-M-j⟩     create count new selections on the lines below the last selection
     ⟨C-p⟩       remove primary selection
     ⟨C-n⟩       select word the selection is currently over, switch to visual mode
     ⟨C-u⟩       make the count previous selection primary
     ⟨C-d⟩       make the count next selection primary
     ⟨C-c⟩       remove the count selection column
     ⟨C-l⟩       remove all but the count selection column
     ⟨Tab⟩       try to align all selections on the same column
     ⟨Escape⟩    dispose all but the primary selection

     The visual modes were enhanced to recognize:

     I           create a selection at the start of every selected line
     A           create a selection at the end of every selected line
     ⟨Tab⟩       left align selections by inserting spaces
     ⟨S-Tab⟩     right align selections by inserting spaces
     ⟨C-a⟩       create new selections everywhere matching current word or selection
     ⟨C-n⟩       create new selection and select next word matching current selection
     ⟨C-x⟩       clear (skip) current selection, but select next matching word
     ⟨C-p⟩       remove primary selection
     ⟨C-u⟩
     ⟨C-k⟩       make the count previous selection primary
     ⟨C-d⟩
     ⟨C-j⟩       make the count next selection primary
     ⟨C-c⟩       remove the count selection column
     ⟨C-l⟩       remove all but the count selection column
     +           rotate selections rightwards count times
     -           rotate selections leftwards count times
     _           trim selections, remove leading and trailing white space
     o           flip selection direction, swap cursor and anchor
     ⟨Escape⟩    clear all selections, switch to normal mode

     In insert and replace mode:

     ⟨S-Tab⟩     align all selections by inserting spaces

     Selections can be manipulated using set operations.  The first operand is the currently
     active selections while the second can be specified as a mark.

     |           set union
     &           set intersection
     \           set minus
     ~           set complement

VI(M) COMMANDS

     Any unique prefix can be used to abbreviate a command.

   File and Window management
     A file must be opened in at least one window.  If the last window displaying a certain file
     is closed all unsaved changes are discarded.  Windows are equally sized and can be displayed
     in either horizontal or vertical fashion.  The ⟨C-wh, ⟨C-wj, ⟨C-wk and ⟨C-wl key
     mappings can be used to switch between windows.

     :new    open an empty window, arrange horizontally

     :vnew   open an empty window, arrange vertically

     :open[!] [file name]
             open a new window, displaying file name if given

     :split [file name]
             split window horizontally

     :vsplit [file name]
             split window vertically

     :q[!] [exit code]
             close currently focused window

     :qall[!] [exit code]
             close all windows, terminate editor with exit code (defaults to 0)

     Commands taking a file name will invoke the vis-open(1) utility, if given a file pattern or
     directory.

   Runtime key mappings
     vis supports global as well as window local run time key mappings which are always evaluated
     recursively.

     :map[!] mode lhs rhs
             add a global key mapping

     :map-window[!] mode lhs rhs
             add a window local key mapping

     :unmap mode lhs
             remove a global key mapping

     :unmap-window mode lhs
             remove a window local key mapping

     In the above mode refers to one of ‘normal’, ‘insert’, ‘replace’, ‘visual’, ‘visual-line’ or
     ‘operator-pending’; lhs refers to the key to map and rhs is a key action or alias.  An
     existing mapping may be overridden by forcing the map command by specifying !.

     Because key mappings are always recursive, doing something like:

           :map! normal j 2j

     will not work because it would enter an endless loop.  Instead, vis uses pseudo keys
     referred to as key actions which can be used to invoke a set of available editor functions.
     :help lists all currently active key bindings as well as all available symbolic keys.

   Keyboard Layout Specific Mappings
     In order to facilitate usage of non-latin keyboard layouts, vis allows one to map locale
     specific keys to their latin equivalents by means of the

           :langmap locale-keys latin-keys

     command.  As an example, the following maps the movement keys in Russian layout:

           :langmap ролд hjkl

     If the key sequences have not the same length, the remainder of the longer sequence will be
     discarded.

     The defined mappings take effect in all non-input modes, i.e. everywhere except in insert
     and replace mode.

   Undo/Redo
     :earlier [count]
             revert to older text state

     :later [count]
             revert to newer text state

     If count is suffixed by either of d (days), h (hours), m (minutes) or s (seconds) it is
     interpreted as an offset from the current system time and the closest available text state
     is restored.

SET OPTIONS

     There are a small number of options that may be set (or unset) to change the editor's
     behavior using the :set command.  This section describes the options, their abbreviations
     and their default values.  Boolean options can be toggled by appending ! to the option name.

     In each entry below, the first part of the tag line is the full name of the option, followed
     by any equivalent abbreviations.  The part in square brackets is the default value of the
     option.

     shell [“/bin/sh”]
             User shell to use for external commands, overrides SHELL and shell field of password
             database /etc/passwd

     escdelay [50]
             Milliseconds to wait before deciding whether an escape sequence should be treated as
             an ⟨Escape⟩ key.

     tabwidth, tw [8]
             Display width of a tab and number of spaces to use if expandtab is enabled.

     autoindent, ai [off]
             Automatically indent new lines by copying white space from previous line.

     expandtab, et [off]
             Whether ⟨Tab⟩ should be expanded to tabwidth spaces.

     number, nu [off]
             Display absolute line numbers.

     relativenumbers, rnu [off]
             Display relative line numbers.

     cursorline, cul [off]
             Highlight line primary cursor resides on.

     colorcolumn, cc [0]
             Highlight a fixed column.

     horizon [32768]
             How many bytes back the lexer will look to synchronize parsing.

     redrawtime [1.0]
             Maximum time (in seconds) to wait for syntax highlighting before aborting it.

     theme [“default-16” or “default-256”]
             Color theme to use, name without file extension.  Loaded from a themes/ sub
             directory of the paths listed in the FILES section.

     syntax [off]
             Syntax highlighting lexer to use, name without file extension.

     show-tabs [off]
             Whether to display replacement symbol instead of tabs.

     show-newlines [off]
             Whether to display replacement symbol instead of newlines.

     show-spaces [off]
             Whether to display replacement symbol instead of blank cells.

     show-eof [on]
             Whether to display replacement symbol for lines after the end of the file.

     savemethod [auto]
             How the current file should be saved, atomic which uses rename(2) to atomically
             replace the file, inplace which truncates the file and then rewrites it or auto
             which tries the former before falling back to the latter.  The rename method fails
             for symlinks, hardlinks, in case of insufficient directory permissions or when
             either the file owner, group, POSIX ACL or SELinux labels can not be restored.

     loadmethod [auto]
             How existing files should be loaded, read which copies the file content to an
             independent in-memory buffer, mmap which memory maps the file from disk and uses OS
             capabilities as caching layer or auto which tries the former for files smaller than
             8Mb and the latter for lager ones.  WARNING: modifying a memory mapped file in-place
             will cause data loss.

     layout [“v” or “h”]
             Whether to use vertical or horizontal layout.

     ignorecase, ic [off]
             Whether to ignore case when searching.

COMMAND and SEARCH PROMPT

     The command and search prompt as opened by :, /, or ? is implemented as a single line height
     window, displaying a regular file whose editing starts in insert mode.  ⟨Escape⟩ switches to
     normal mode, a second ⟨Escape⟩ cancels the prompt.  ⟨Up⟩ enlarges the window, giving access
     to the command history.  ⟨C-v⟩ ⟨Enter⟩ inserts a literal new line thus enabling multiline
     commands.  ⟨Enter⟩ executes the visual selection if present, or else everything in the
     region spawned by the selection position and the delimiting prompt symbols at the start of
     adjacent lines.

CONFIGURATION

     vis uses Lua for configuration and scripting purposes.  During startup visrc.lua (see the
     FILES section) is sourced which can be used to set personal configuration options.  As an
     example the following will enable the display of line numbers:

           vis:command('set number')

ENVIRONMENT

     VIS_PATH
             The default path to use to load Lua support files.

     HOME    The home directory used for the cd command if no argument is given.

     TERM    The terminal type to use to initialize the curses interface, defaults to xterm if
             unset.

     SHELL   The command shell to use for I/O related commands like !, >, < and |.

     XDG_CONFIG_HOME
             The configuration directory to use, defaults to $HOME/.config if unset.

ASYNCHRONOUS EVENTS

     SIGSTOP
             Suspend editor.

     SIGCONT
             Resume editor.

     SIGBUS  An mmap(2) ed file got truncated, unsaved file contents will be lost.

     SIGHUP

     SIGTERM
             Restore initial terminal state.  Unsaved file contents will be lost.

     SIGINT  When an interrupt occurs while an external command is being run it is terminated.

     SIGWINCH
             The screen is resized.

FILES

     Upon startup vis will source the first visrc.lua configuration file found from these
     locations.  All actively used paths can be listed at runtime using the :help command.

        $VIS_PATH

        The location of the vis binary (on systems where /proc/self/exe is available).

        $XDG_CONFIG_HOME/vis where XDG_CONFIG_HOME refers to $HOME/.config if unset.

        /etc/vis for a system-wide configuration provided by administrator.

        /usr/local/share/vis or /usr/share/vis depending on the build configuration.

         When creating a new visrc.lua be sure to copy the structure from here.

EXIT STATUS

     The vis utility exits 0 on success, and >0 if an error occurs.

EXAMPLES

     Use vis as an interactive filter.

           $ { echo Pick your number; seq 1 10; } | vis - > choice

     Use the vis-open(1) based file browser to list all C language source files:

           :e *.c

     Spawn background process and pipe range to its standard input:

           :> { plumber <&3 3<&- & } 3<&0 1>&- 2>&-

SEE ALSO

     sam(1), vi(1), vis-clipboard(1), vis-complete(1), vis-digraph(1), vis-menu(1), vis-open(1)

     A Tutorial for the Sam Command Language: http://doc.cat-
     v.org/bell_labs/sam_lang_tutorial/sam_tut.pdf by Rob Pike

     The Text Editor sam: http://doc.cat-v.org/plan_9/4th_edition/papers/sam/ by Rob Pike

     Plan 9 manual page for sam(1): http://man.cat-v.org/plan_9/1/sam

     Structural Regular Expressions: http://doc.cat-v.org/bell_labs/structural_regexps/se.pdf by
     Rob Pike

     vi - screen-oriented (visual) display editor:
     http://pubs.opengroup.org/onlinepubs/9699919799/utilities/vi.html IEEE Std 1003.1
     (“POSIX.1”)

STANDARDS

     vis does not strive to be IEEE Std 1003.1 (“POSIX.1”) compatible, but shares obvious
     similarities with the vi utility.

AUTHORS

     vis is written by Marc André Tanner <mat at brain-dump.org>

BUGS

     On some systems there already exists a vis binary, thus causing a name conflict.