Provided by: manpages-dev_6.03-1_all bug

NAME

       mlock, mlock2, munlock, mlockall, munlockall - lock and unlock memory

LIBRARY

       Standard C library (libc, -lc)

SYNOPSIS

       #include <sys/mman.h>

       int mlock(const void addr[.len], size_t len);
       int mlock2(const void addr[.len], size_t len, unsigned int flags);
       int munlock(const void addr[.len], size_t len);

       int mlockall(int flags);
       int munlockall(void);

DESCRIPTION

       mlock(),  mlock2(),  and  mlockall()  lock  part  or  all of the calling process's virtual
       address space into RAM, preventing that memory from being paged to the swap area.

       munlock() and munlockall() perform the converse operation, unlocking part or  all  of  the
       calling  process's  virtual  address space, so that pages in the specified virtual address
       range may once more be swapped out if required by the kernel memory manager.

       Memory locking and unlocking are performed in units of whole pages.

   mlock(), mlock2(), and munlock()
       mlock() locks pages in the address range starting at addr and continuing  for  len  bytes.
       All pages that contain a part of the specified address range are guaranteed to be resident
       in RAM when the call returns successfully; the pages are guaranteed to stay in  RAM  until
       later unlocked.

       mlock2()  also  locks pages in the specified range starting at addr and continuing for len
       bytes.  However, the state of the pages contained in that range  after  the  call  returns
       successfully will depend on the value in the flags argument.

       The flags argument can be either 0 or the following constant:

       MLOCK_ONFAULT
              Lock  pages  that  are  currently  resident  and  mark the entire range so that the
              remaining nonresident pages are locked when they are populated by a page fault.

       If flags is 0, mlock2() behaves exactly the same as mlock().

       munlock() unlocks pages in the address range starting  at  addr  and  continuing  for  len
       bytes.   After  this call, all pages that contain a part of the specified memory range can
       be moved to external swap space again by the kernel.

   mlockall() and munlockall()
       mlockall() locks all pages mapped into the address space of  the  calling  process.   This
       includes the pages of the code, data, and stack segment, as well as shared libraries, user
       space kernel  data,  shared  memory,  and  memory-mapped  files.   All  mapped  pages  are
       guaranteed  to  be  resident  in  RAM  when  the  call returns successfully; the pages are
       guaranteed to stay in RAM until later unlocked.

       The flags argument is constructed as the bitwise OR  of  one  or  more  of  the  following
       constants:

       MCL_CURRENT
              Lock all pages which are currently mapped into the address space of the process.

       MCL_FUTURE
              Lock  all  pages  which will become mapped into the address space of the process in
              the future.  These could be, for instance, new pages required by a growing heap and
              stack as well as new memory-mapped files or shared memory regions.

       MCL_ONFAULT (since Linux 4.4)
              Used  together  with  MCL_CURRENT,  MCL_FUTURE,  or  both.   Mark all current (with
              MCL_CURRENT) or future (with MCL_FUTURE) mappings  to  lock  pages  when  they  are
              faulted  in.   When  used  with  MCL_CURRENT,  all  present  pages  are locked, but
              mlockall() will not fault in non-present pages.  When  used  with  MCL_FUTURE,  all
              future  mappings  will  be  marked to lock pages when they are faulted in, but they
              will not be populated by the lock when the mapping is created.  MCL_ONFAULT must be
              used with either MCL_CURRENT or MCL_FUTURE or both.

       If  MCL_FUTURE  has  been  specified,  then  a  later system call (e.g., mmap(2), sbrk(2),
       malloc(3)), may fail if it would cause the number of locked bytes to exceed the  permitted
       maximum  (see  below).   In  the  same  circumstances, stack growth may likewise fail: the
       kernel will deny stack expansion and deliver a SIGSEGV signal to the process.

       munlockall() unlocks all pages mapped into the address space of the calling process.

RETURN VALUE

       On success, these system calls return 0.  On error,  -1  is  returned,  errno  is  set  to
       indicate  the  error,  and  no  changes  are made to any locks in the address space of the
       process.

ERRORS

       EAGAIN (mlock(), mlock2(), and munlock()) Some or all of the specified address range could
              not be locked.

       EINVAL (mlock(),  mlock2(),  and  munlock())  The result of the addition addr+len was less
              than addr (e.g., the addition may have resulted in an overflow).

       EINVAL (mlock2()) Unknown flags were specified.

       EINVAL (mlockall()) Unknown flags were specified  or  MCL_ONFAULT  was  specified  without
              either MCL_FUTURE or MCL_CURRENT.

       EINVAL (Not on Linux) addr was not a multiple of the page size.

       ENOMEM (mlock(),  mlock2(),  and  munlock())  Some of the specified address range does not
              correspond to mapped pages in the address space of the process.

       ENOMEM (mlock(), mlock2(), and munlock()) Locking or unlocking a region  would  result  in
              the  total  number  of  mappings  with  distinct  attributes  (e.g.,  locked versus
              unlocked) exceeding the allowed maximum.  (For example, unlocking a  range  in  the
              middle  of  a  currently  locked mapping would result in three mappings: two locked
              mappings at each end and an unlocked mapping in the middle.)

       ENOMEM (Linux 2.6.9 and later) the caller  had  a  nonzero  RLIMIT_MEMLOCK  soft  resource
              limit,  but  tried to lock more memory than the limit permitted.  This limit is not
              enforced if the process is privileged (CAP_IPC_LOCK).

       ENOMEM (Linux 2.4 and earlier) the calling process tried to lock more than half of RAM.

       EPERM  The caller is not privileged, but needs privilege  (CAP_IPC_LOCK)  to  perform  the
              requested operation.

       EPERM  (munlockall())   (Linux   2.6.8   and   earlier)  The  caller  was  not  privileged
              (CAP_IPC_LOCK).

VERSIONS

       mlock2() is available since Linux 4.4; glibc support was added in glibc 2.27.

STANDARDS

       mlock(), munlock(), mlockall(), and munlockall(): POSIX.1-2001, POSIX.1-2008, SVr4.

       mlock2() is Linux specific.

       On POSIX systems on which mlock() and munlock()  are  available,  _POSIX_MEMLOCK_RANGE  is
       defined  in  <unistd.h>  and  the  number  of  bytes  in a page can be determined from the
       constant PAGESIZE (if defined) in <limits.h> or by calling sysconf(_SC_PAGESIZE).

       On POSIX systems on which mlockall() and munlockall()  are  available,  _POSIX_MEMLOCK  is
       defined in <unistd.h> to a value greater than 0.  (See also sysconf(3).)

NOTES

       Memory  locking  has  two  main  applications: real-time algorithms and high-security data
       processing.  Real-time applications require deterministic timing,  and,  like  scheduling,
       paging  is one major cause of unexpected program execution delays.  Real-time applications
       will  usually  also  switch  to  a   real-time   scheduler   with   sched_setscheduler(2).
       Cryptographic security software often handles critical bytes like passwords or secret keys
       as data structures.  As a result of paging, these secrets  could  be  transferred  onto  a
       persistent  swap  store medium, where they might be accessible to the enemy long after the
       security software has erased the secrets in RAM and terminated.  (But be  aware  that  the
       suspend mode on laptops and some desktop computers will save a copy of the system's RAM to
       disk, regardless of memory locks.)

       Real-time processes that are using mlockall() to prevent  delays  on  page  faults  should
       reserve  enough  locked  stack pages before entering the time-critical section, so that no
       page fault can be caused by function calls.  This can be achieved by  calling  a  function
       that allocates a sufficiently large automatic variable (an array) and writes to the memory
       occupied by this array in order to touch these stack pages.  This way, enough  pages  will
       be mapped for the stack and can be locked into RAM.  The dummy writes ensure that not even
       copy-on-write page faults can occur in the critical section.

       Memory locks are not inherited by a  child  created  via  fork(2)  and  are  automatically
       removed  (unlocked)  during  an  execve(2) or when the process terminates.  The mlockall()
       MCL_FUTURE and MCL_FUTURE | MCL_ONFAULT settings are not inherited by a child created  via
       fork(2) and are cleared during an execve(2).

       Note  that  fork(2)  will  prepare  the  address space for a copy-on-write operation.  The
       consequence is that any write access that follows will cause a page fault that in turn may
       cause  high  latencies  for  a  real-time process.  Therefore, it is crucial not to invoke
       fork(2) after an mlockall() or mlock() operation—not even from a thread which  runs  at  a
       low priority within a process which also has a thread running at elevated priority.

       The  memory  lock  on  an  address  range is automatically removed if the address range is
       unmapped via munmap(2).

       Memory locks do not stack, that is, pages which have been locked several times by calls to
       mlock(),  mlock2(),  or  mlockall() will be unlocked by a single call to munlock() for the
       corresponding range or by munlockall().  Pages which are mapped to several locations or by
       several processes stay locked into RAM as long as they are locked at least at one location
       or by at least one process.

       If a call to mlockall() which uses the MCL_FUTURE flag is followed by  another  call  that
       does not specify this flag, the changes made by the MCL_FUTURE call will be lost.

       The mlock2() MLOCK_ONFAULT flag and the mlockall() MCL_ONFAULT flag allow efficient memory
       locking for applications that deal with large mappings where only  a  (small)  portion  of
       pages  in  the  mapping are touched.  In such cases, locking all of the pages in a mapping
       would incur a significant penalty for memory locking.

   Linux notes
       Under Linux, mlock(), mlock2(), and munlock() automatically round addr down to the nearest
       page  boundary.   However,  the  POSIX.1  specification of mlock() and munlock() allows an
       implementation to require that addr is  page  aligned,  so  portable  applications  should
       ensure this.

       The  VmLck field of the Linux-specific /proc/[pid]/status file shows how many kilobytes of
       memory the process with ID PID has locked using mlock(), mlock2(), mlockall(), and mmap(2)
       MAP_LOCKED.

   Limits and permissions
       In  Linux  2.6.8 and earlier, a process must be privileged (CAP_IPC_LOCK) in order to lock
       memory and the RLIMIT_MEMLOCK soft resource limit defines a limit on how much  memory  the
       process may lock.

       Since  Linux 2.6.9, no limits are placed on the amount of memory that a privileged process
       can lock and the RLIMIT_MEMLOCK soft resource limit instead defines a limit  on  how  much
       memory an unprivileged process may lock.

BUGS

       In  Linux  4.8  and  earlier,  a  bug  in  the  kernel's  accounting  of locked memory for
       unprivileged processes (i.e., without CAP_IPC_LOCK) meant that if the region specified  by
       addr and len overlapped an existing lock, then the already locked bytes in the overlapping
       region were counted twice when checking against the limit.  Such double  accounting  could
       incorrectly  calculate  a  "total  locked  memory" value for the process that exceeded the
       RLIMIT_MEMLOCK limit, with the result that mlock() and mlock2()  would  fail  on  requests
       that should have succeeded.  This bug was fixed in Linux 4.9.

       In  Linux  2.4  series  of  kernels  up  to  and  including Linux 2.4.17, a bug caused the
       mlockall() MCL_FUTURE flag to be inherited across a fork(2).  This was rectified in  Linux
       2.4.18.

       Since  Linux  2.6.9,  if  a  privileged process calls mlockall(MCL_FUTURE) and later drops
       privileges (loses the CAP_IPC_LOCK capability by, for example, setting its  effective  UID
       to  a nonzero value), then subsequent memory allocations (e.g., mmap(2), brk(2)) will fail
       if the RLIMIT_MEMLOCK resource limit is encountered.

SEE ALSO

       mincore(2), mmap(2), setrlimit(2), shmctl(2), sysconf(3), proc(5), capabilities(7)