Provided by: libtest2-harness-perl_1.000147-1_all 
NAME
App::Yath::Command::kill - Kill the runner and any running or pending tests
DESCRIPTION
This command will kill the active yath runner and any running or pending tests.
USAGE
$ yath [YATH OPTIONS] kill [COMMAND OPTIONS]
YATH OPTIONS
Developer
--dev-lib
--dev-lib=lib
-D
-D=lib
-Dlib
--no-dev-lib
Add paths to @INC before loading ANYTHING. This is what you use if you are developing
yath or yath plugins to make sure the yath script finds the local code instead of the
installed versions of the same code. You can provide an argument (-Dfoo) to provide a
custom path, or you can just use -D without and arg to add lib, blib/lib and
blib/arch.
Can be specified multiple times
Environment
--persist-dir ARG
--persist-dir=ARG
--no-persist-dir
Where to find persistence files.
--persist-file ARG
--persist-file=ARG
--pfile ARG
--pfile=ARG
--no-persist-file
Where to find the persistence file. The default is
/{system-tempdir}/project-yath-persist.json. If no project is specified then it will
fall back to the current directory. If the current directory is not writable it will
default to /tmp/yath-persist.json which limits you to one persistent runner on your
system.
--project ARG
--project=ARG
--project-name ARG
--project-name=ARG
--no-project
This lets you provide a label for your current project/codebase. This is best used in
a .yath.rc file. This is necessary for a persistent runner.
Finder Options
--finder MyFinder
--finder +Test2::Harness::Finder::MyFinder
--no-finder
Specify what Finder subclass to use when searching for files/processing the file list.
Use the "+" prefix to specify a fully qualified namespace, otherwise
Test2::Harness::Finder::XXX namespace is assumed.
Help and Debugging
--show-opts
--no-show-opts
Exit after showing what yath thinks your options mean
--version
-V
--no-version
Exit after showing a helpful usage message
Plugins
--no-scan-plugins
--no-no-scan-plugins
Normally yath scans for and loads all App::Yath::Plugin::* modules in order to bring
in command-line options they may provide. This flag will disable that. This is useful
if you have a naughty plugin that is loading other modules when it should not.
--plugins PLUGIN
--plugins +App::Yath::Plugin::PLUGIN
--plugins PLUGIN=arg1,arg2,...
--plugin PLUGIN
--plugin +App::Yath::Plugin::PLUGIN
--plugin PLUGIN=arg1,arg2,...
-pPLUGIN
--no-plugins
Load a yath plugin.
Can be specified multiple times
COMMAND OPTIONS
Cover Options
--cover-aggregator ByTest
--cover-aggregator ByRun
--cover-aggregator +Custom::Aggregator
--cover-agg ByTest
--cover-agg ByRun
--cover-agg +Custom::Aggregator
--no-cover-aggregator
Choose a custom aggregator subclass
--cover-class ARG
--cover-class=ARG
--no-cover-class
Choose a Test2::Plugin::Cover subclass
--cover-dirs ARG
--cover-dirs=ARG
--cover-dir ARG
--cover-dir=ARG
--no-cover-dirs
NO DESCRIPTION - FIX ME
Can be specified multiple times
--cover-exclude-private
--no-cover-exclude-private
--cover-files
--no-cover-files
Use Test2::Plugin::Cover to collect coverage data for what files are touched by what
tests. Unlike Devel::Cover this has very little performance impact (About 4%
difference)
--cover-from path/to/log.jsonl
--cover-from http://example.com/coverage
--cover-from path/to/coverage.jsonl
--no-cover-from
This can be a test log, a coverage dump (old style json or new jsonl format), or a url
to any of the previous. Tests will not be run if the file/url is invalid.
--cover-from-type json
--cover-from-type jsonl
--cover-from-type log
--no-cover-from-type
File type for coverage source. Usually it can be detected, but when it cannot be you
should specify. "json" is old style single-blob coverage data, "jsonl" is the new by-
test style, "log" is a logfile from a previous run.
--cover-manager My::Coverage::Manager
--no-cover-manager
Coverage 'from' manager to use when coverage data does not provide one
--cover-maybe-from path/to/log.jsonl
--cover-maybe-from http://example.com/coverage
--cover-maybe-from path/to/coverage.jsonl
--no-cover-maybe-from
This can be a test log, a coverage dump (old style json or new jsonl format), or a url
to any of the previous. Tests will coninue if even if the coverage file/url is
invalid.
--cover-maybe-from-type json
--cover-maybe-from-type jsonl
--cover-maybe-from-type log
--no-cover-maybe-from-type
Same as "from_type" but for "maybe_from". Defaults to "from_type" if that is
specified, otherwise auto-detect
--cover-metrics
--no-cover-metrics
--cover-types ARG
--cover-types=ARG
--cover-type ARG
--cover-type=ARG
--no-cover-types
NO DESCRIPTION - FIX ME
Can be specified multiple times
--cover-write
--cover-write=coverage.jsonl
--cover-write=coverage.json
--no-cover-write
Create a json or jsonl file of all coverage data seen during the run (This implies
--cover-files).
Display Options
--color
--no-color
Turn color on, default is true if STDOUT is a TTY.
--hide-runner-output
--no-hide-runner-output
Hide output from the runner, showing only test output. (See Also
truncate_runner_output)
--no-wrap
--no-no-wrap
Do not do fancy text-wrapping, let the terminal handle it
--progress
--no-progress
Toggle progress indicators. On by default if STDOUT is a TTY. You can use
--no-progress to disable the 'events seen' counter and buffered event pre-display
--quiet
-q
--no-quiet
Be very quiet.
Can be specified multiple times
--renderers +My::Renderer
--renderers Renderer=arg1,arg2,...
--renderer +My::Renderer
--renderer Renderer=arg1,arg2,...
--no-renderers
Specify renderers, (Default: "Formatter=Test2"). Use "+" to give a fully qualified
module name. Without "+" "Test2::Harness::Renderer::" will be prepended to your
argument.
Can be specified multiple times. If the same key is listed multiple times the value
lists will be appended together.
--show-times
-T
--no-show-times
Show the timing data for each job
--term-width 80
--term-width 200
--term-size 80
--term-size 200
--no-term-width
Alternative to setting $TABLE_TERM_SIZE. Setting this will override the terminal width
detection to the number of characters specified.
--truncate-runner-output
--no-truncate-runner-output
Only show runner output that was generated after the current command. This is only
useful with a persistent runner.
--verbose
-v
--no-verbose
Be more verbose
Can be specified multiple times
Finder Options
--changed path/to/file
--no-changed
Specify one or more files as having been changed.
Can be specified multiple times
--changed-only
--no-changed-only
Only search for tests for changed files (Requires a coverage data source, also
requires a list of changes either from the --changed option, or a plugin that
implements changed_files() or changed_diff())
--changes-diff path/to/diff.diff
--no-changes-diff
Path to a diff file that should be used to find changed files for use with
--changed-only. This must be in the same format as `git diff -W --minimal -U1000000`
--changes-exclude-file path/to/file
--no-changes-exclude-file
Specify one or more files to ignore when looking at changes
Can be specified multiple times
--changes-exclude-loads
--no-changes-exclude-loads
Exclude coverage tests which only load changed files, but never call code from them.
(default: off)
--changes-exclude-nonsub
--no-changes-exclude-nonsub
Exclude changes outside of subroutines (perl files only) (default: off)
--changes-exclude-opens
--no-changes-exclude-opens
Exclude coverage tests which only open() changed files, but never call code from them.
(default: off)
--changes-exclude-pattern '(apple|pear|orange)'
--no-changes-exclude-pattern
Ignore files matching this pattern when looking for changes. Your pattern will be
inserted unmodified into a `$file =~ m/$pattern/` check.
Can be specified multiple times
--changes-filter-file path/to/file
--no-changes-filter-file
Specify one or more files to check for changes. Changes to other files will be ignored
Can be specified multiple times
--changes-filter-pattern '(apple|pear|orange)'
--no-changes-filter-pattern
Specify a pattern for change checking. When only running tests for changed files this
will limit which files are checked for changes. Only files that match this pattern
will be checked. Your pattern will be inserted unmodified into a `$file =~
m/$pattern/` check.
Can be specified multiple times
--changes-include-whitespace
--no-changes-include-whitespace
Include changed lines that are whitespace only (default: off)
--changes-plugin Git
--changes-plugin +App::Yath::Plugin::Git
--no-changes-plugin
What plugin should be used to detect changed files.
--default-at-search ARG
--default-at-search=ARG
--no-default-at-search
Specify the default file/dir search when 'AUTHOR_TESTING' is set. Defaults to './xt'.
The default AT search is only used if no files were specified at the command line
Can be specified multiple times
--default-search ARG
--default-search=ARG
--no-default-search
Specify the default file/dir search. defaults to './t', './t2', and 'test.pl'. The
default search is only used if no files were specified at the command line
Can be specified multiple times
--durations file.json
--durations http://example.com/durations.json
--no-durations
Point at a json file or url which has a hash of relative test filenames as keys, and
'SHORT', 'MEDIUM', or 'LONG' as values. This will override durations listed in the
file headers. An exception will be thrown if the durations file or url does not work.
--durations-threshold ARG
--durations-threshold=ARG
--Dt ARG
--Dt=ARG
--no-durations-threshold
Only fetch duration data if running at least this number of tests. Default (-j value +
1)
--exclude-file t/nope.t
--no-exclude-file
Exclude a file from testing
Can be specified multiple times
--exclude-list file.txt
--exclude-list http://example.com/exclusions.txt
--no-exclude-list
Point at a file or url which has a new line separated list of test file names to
exclude from testing. Starting a line with a '#' will comment it out (for
compatibility with Test2::Aggregate list files).
Can be specified multiple times
--exclude-pattern t/nope.t
--no-exclude-pattern
Exclude a pattern from testing, matched using m/$PATTERN/
Can be specified multiple times
--extension ARG
--extension=ARG
--ext ARG
--ext=ARG
--no-extension
Specify valid test filename extensions, default: t and t2
Can be specified multiple times
--maybe-durations file.json
--maybe-durations http://example.com/durations.json
--no-maybe-durations
Point at a json file or url which has a hash of relative test filenames as keys, and
'SHORT', 'MEDIUM', or 'LONG' as values. This will override durations listed in the
file headers. An exception will be thrown if the durations file or url does not work.
--no-long
--no-no-long
Do not run tests that have their duration flag set to 'LONG'
--only-long
--no-only-long
Only run tests that have their duration flag set to 'LONG'
--rerun
--rerun=path/to/log.jsonl
--rerun=plugin_specific_string
--no-rerun
Re-Run tests from a previous run from a log file (or last log file). Plugins can
intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run
from that.
--rerun-failed
--rerun-failed=path/to/log.jsonl
--rerun-failed=plugin_specific_string
--no-rerun-failed
Re-Run failed tests from a previous run from a log file (or last log file). Plugins
can intercept this, such as YathUIDB which will grab a run UUID and derive tests to
re-run from that.
--rerun-plugin Foo
--rerun-plugin +App::Yath::Plugin::Foo
--no-rerun-plugin
What plugin(s) should be used for rerun (will fallback to other plugins if the listed
ones decline the value, this is just used ot set an order of priority)
Can be specified multiple times
--search ARG
--search=ARG
--no-search
List of tests and test directories to use instead of the default search paths.
Typically these can simply be listed as command line arguments without the --search
prefix.
Can be specified multiple times
--show-changed-files
--no-show-changed-files
Print a list of changed files if any are found
Formatter Options
--formatter ARG
--formatter=ARG
--no-formatter
NO DESCRIPTION - FIX ME
--qvf
--no-qvf
[Q]uiet, but [V]erbose on [F]ailure. Hide all output from tests when they pass, except
to say they passed. If a test fails then ALL output from the test is verbosely output.
--show-job-end
--no-show-job-end
Show output when a job ends. (Default: on)
--show-job-info
--no-show-job-info
Show the job configuration when a job starts. (Default: off, unless -vv)
--show-job-launch
--no-show-job-launch
Show output for the start of a job. (Default: off unless -v)
--show-run-info
--no-show-run-info
Show the run configuration when a run starts. (Default: off, unless -vv)
Git Options
--git-change-base master
--git-change-base HEAD^
--git-change-base df22abe4
--no-git-change-base
Find files changed by all commits in the current branch from most recent stopping when
a commit is found that is also present in the history of the branch/commit specified
as the change base.
Help and Debugging
--dummy
-d
--no-dummy
Dummy run, do not actually execute anything
Can also be set with the following environment variables: "T2_HARNESS_DUMMY"
--help
-h
--no-help
exit after showing help information
--interactive
-i
--no-interactive
Use interactive mode, 1 test at a time, stdin forwarded to it
--keep-dirs
--keep_dir
-k
--no-keep-dirs
Do not delete directories when done. This is useful if you want to inspect the
directories used for various commands.
--procname-prefix ARG
--procname-prefix=ARG
--no-procname-prefix
Add a prefix to all proc names (as seen by ps).
--summary
--summary=/path/to/summary.json
--no-summary
Write out a summary json file, if no path is provided 'summary.json' will be used. The
.json extension is added automatically if omitted.
Logging Options
--bzip2
--bz2
--bzip2_log
-B
--no-bzip2
Use bzip2 compression when writing the log. This option implies -L. The .bz2 prefix is
added to log file name for you
--gzip
--gz
--gzip_log
-G
--no-gzip
Use gzip compression when writing the log. This option implies -L. The .gz prefix is
added to log file name for you
--log
-L
--no-log
Turn on logging
--log-dir ARG
--log-dir=ARG
--no-log-dir
Specify a log directory. Will fall back to the system temp dir.
--log-file ARG
--log-file=ARG
-F ARG
-F=ARG
--no-log-file
Specify the name of the log file. This option implies -L.
--log-file-format ARG
--log-file-format=ARG
--lff ARG
--lff=ARG
--no-log-file-format
Specify the format for automatically-generated log files. Overridden by --log-file, if
given. This option implies -L (Default: \$YATH_LOG_FILE_FORMAT, if that is set, or
else "%!P%Y-%m-%d~%H:%M:%S~%!U~%!p.jsonl"). This is a string in which percent-escape
sequences will be replaced as per POSIX::strftime. The following special escape
sequences are also replaced: (%!P : Project name followed by a ~, if a project is
defined, otherwise empty string) (%!U : the unique test run ID) (%!p : the process ID)
(%!S : the number of seconds since local midnight UTC)
Can also be set with the following environment variables: "YATH_LOG_FILE_FORMAT",
"TEST2_HARNESS_LOG_FORMAT"
Notification Options
--notify-email foo@example.com
--no-notify-email
Email the test results to the specified email address(es)
Can be specified multiple times
--notify-email-fail foo@example.com
--no-notify-email-fail
Email failing results to the specified email address(es)
Can be specified multiple times
--notify-email-from foo@example.com
--no-notify-email-from
If any email is sent, this is who it will be from
--notify-email-owner
--no-notify-email-owner
Email the owner of broken tests files upon failure. Add `# HARNESS-META-OWNER
foo@example.com` to the top of a test file to give it an owner
--notify-no-batch-email
--no-notify-no-batch-email
Usually owner failures are sent as a single batch at the end of testing. Toggle this
to send failures as they happen.
--notify-no-batch-slack
--no-notify-no-batch-slack
Usually owner failures are sent as a single batch at the end of testing. Toggle this
to send failures as they happen.
--notify-slack '#foo'
--notify-slack '@bar'
--no-notify-slack
Send results to a slack channel and/or user
Can be specified multiple times
--notify-slack-fail '#foo'
--notify-slack-fail '@bar'
--no-notify-slack-fail
Send failing results to a slack channel and/or user
Can be specified multiple times
--notify-slack-owner
--no-notify-slack-owner
Send slack notifications to the slack channels/users listed in test meta-data when
tests fail.
--notify-slack-url https://hooks.slack.com/...
--no-notify-slack-url
Specify an API endpoint for slack webhook integrations
--notify-text ARG
--notify-text=ARG
--message ARG
--message=ARG
--msg ARG
--msg=ARG
--no-notify-text
Add a custom text snippet to email/slack notifications
--notify-text-module ARG
--notify-text-module=ARG
--message_module ARG
--message_module=ARG
--no-notify-text-module
Use the specified module to generate messages for emails and/or slack.
Run Options
--author-testing
-A
--no-author-testing
This will set the AUTHOR_TESTING environment to true
--dbi-profiling
--no-dbi-profiling
Use Test2::Plugin::DBIProfile to collect database profiling data
--env-var VAR=VAL
-EVAR=VAL
-E VAR=VAL
--no-env-var
Set environment variables to set when each test is run.
Can be specified multiple times
--event-uuids
--uuids
--no-event-uuids
Use Test2::Plugin::UUID inside tests (default: on)
--fields name:details
--fields JSON_STRING
-f name:details
-f JSON_STRING
--no-fields
Add custom data to the harness run
Can be specified multiple times
--input ARG
--input=ARG
--no-input
Input string to be used as standard input for ALL tests. See also: --input-file
--input-file ARG
--input-file=ARG
--no-input-file
Use the specified file as standard input to ALL tests
--io-events
--no-io-events
Use Test2::Plugin::IOEvents inside tests to turn all prints into test2 events
(default: off)
--link 'https://travis.work/builds/42'
--link 'https://jenkins.work/job/42'
--link 'https://buildbot.work/builders/foo/builds/42'
--no-link
Provide one or more links people can follow to see more about this run.
Can be specified multiple times
--load ARG
--load=ARG
--load-module ARG
--load-module=ARG
-m ARG
-m=ARG
--no-load
Load a module in each test (after fork). The "import" method is not called.
Can be specified multiple times
--load-import Module
--load-import Module=import_arg1,arg2,...
--loadim Module
--loadim Module=import_arg1,arg2,...
-M Module
-M Module=import_arg1,arg2,...
--no-load-import
Load a module in each test (after fork). Import is called.
Can be specified multiple times. If the same key is listed multiple times the value
lists will be appended together.
--mem-usage
--no-mem-usage
Use Test2::Plugin::MemUsage inside tests (default: on)
--retry ARG
--retry=ARG
-r ARG
-r=ARG
--no-retry
Run any jobs that failed a second time. NOTE: --retry=1 means failing tests will be
attempted twice!
--retry-isolated
--retry-iso
--no-retry-isolated
If true then any job retries will be done in isolation (as though -j1 was set)
--run-id
--id
--no-run-id
Set a specific run-id. (Default: a UUID)
--test-args ARG
--test-args=ARG
--no-test-args
Arguments to pass in as @ARGV for all tests that are run. These can be provided easier
using the '::' argument separator.
Can be specified multiple times
--stream
--no-stream
Use the stream formatter (default is on)
--tap
--TAP
----no-stream
--no-tap
The TAP format is lossy and clunky. Test2::Harness normally uses a newer streaming
format to receive test results. There are old/legacy tests where this causes problems,
in which case setting --TAP or --no-stream can help.
YathUI Options
--yathui-api-key ARG
--yathui-api-key=ARG
--no-yathui-api-key
Yath-UI API key. This is not necessary if your Yath-UI instance is set to single-user
--yathui-coverage
--no-yathui-coverage
Poll coverage data from Yath-UI to determine what tests should be run for changed
files
--yathui-db
--no-yathui-db
Add the YathUI DB renderer in addition to other renderers
--yathui-durations
--no-yathui-durations
Poll duration data from Yath-UI to help order tests efficiently
--yathui-grace
--no-yathui-grace
If yath cannot connect to yath-ui it normally throws an error, use this to make it
fail gracefully. You get a warning, but things keep going.
--yathui-long-duration 10
--no-yathui-long-duration
Minimum duration length (seconds) before a test goes from MEDIUM to LONG
--yathui-medium-duration 5
--no-yathui-medium-duration
Minimum duration length (seconds) before a test goes from SHORT to MEDIUM
--yathui-mode summary
--yathui-mode qvf
--yathui-mode qvfd
--yathui-mode complete
--no-yathui-mode
Set the upload mode (default 'qvfd')
--yathui-only
--no-yathui-only
Only use the YathUI renderer
--yathui-only-db
--no-yathui-only-db
Only use the YathUI DB renderer
--yathui-port 8080
--no-yathui-port
Port to use when running a local server
--yathui-port-command get_port.sh
--yathui-port-command get_port.sh --pid $$
--no-yathui-port-command
Use a command to get a port number. "$$" will be replaced with the PID of the yath
process
--yathui-project ARG
--yathui-project=ARG
--no-yathui-project
The Yath-UI project for your test results
--yathui-render
--no-yathui-render
Add the YathUI renderer in addition to other renderers
--yathui-retry
--no-yathui-retry
How many times to try an operation before giving up
Can be specified multiple times
--yathui-schema PostgreSQL
--yathui-schema MySQL
--yathui-schema MySQL56
--no-yathui-schema
What type of DB/schema to use when using a temporary database
--yathui-upload
--no-yathui-upload
Upload the log to Yath-UI
--yathui-url http://my-yath-ui.com/...
--uri http://my-yath-ui.com/...
--no-yathui-url
Yath-UI url
--yathui-user ARG
--yathui-user=ARG
--no-yathui-user
Username to attach to the data sent to the db
--yathui-db-buffering none
--yathui-db-buffering job
--yathui-db-buffering diag
--yathui-db-buffering run
--no-yathui-db-buffering
Type of buffering to use, if "none" then events are written to the db one at a time,
which is SLOW
--yathui-db-config ARG
--yathui-db-config=ARG
--no-yathui-db-config
Module that implements 'MODULE->yath_ui_config(%params)' which should return a
Test2::Harness::UI::Config instance.
--yathui-db-coverage
--no-yathui-db-coverage
Pull coverage data directly from the database (default: off)
--yathui-db-driver Pg
--yathui-db-drivermysql
--yathui-db-driverMariaDB
--no-yathui-db-driver
DBI Driver to use
--yathui-db-dsn ARG
--yathui-db-dsn=ARG
--no-yathui-db-dsn
DSN to use when connecting to the db
--yathui-db-duration-limit ARG
--yathui-db-duration-limit=ARG
--no-yathui-db-duration-limit
Limit the number of runs to look at for durations data (default: 10)
--yathui-db-durations
--no-yathui-db-durations
Pull duration data directly from the database (default: off)
--yathui-db-flush-interval 2
--yathui-db-flush-interval 1.5
--no-yathui-db-flush-interval
When buffering DB writes, force a flush when an event is recieved at least N seconds
after the last flush.
--yathui-db-host ARG
--yathui-db-host=ARG
--no-yathui-db-host
hostname to use when connecting to the db
--yathui-db-name ARG
--yathui-db-name=ARG
--no-yathui-db-name
Name of the database to use for yathui
--yathui-db-pass ARG
--yathui-db-pass=ARG
--no-yathui-db-pass
Password to use when connecting to the db
--yathui-db-port ARG
--yathui-db-port=ARG
--no-yathui-db-port
port to use when connecting to the db
--yathui-db-publisher ARG
--yathui-db-publisher=ARG
--no-yathui-db-publisher
When using coverage or duration data, only use data uploaded by this user
--yathui-db-socket ARG
--yathui-db-socket=ARG
--no-yathui-db-socket
socket to use when connecting to the db
--yathui-db-user ARG
--yathui-db-user=ARG
--no-yathui-db-user
Username to use when connecting to the db
NO CATEGORY - FIX ME
--check-reload-state
--no-check-reload-state
Abort the run if there are unfixes reload errors and show a confirmation dialogue for
unfixed reload warnings.
SOURCE
The source code repository for Test2-Harness can be found at
http://github.com/Test-More/Test2-Harness/.
MAINTAINERS
Chad Granum <exodist@cpan.org>
AUTHORS
Chad Granum <exodist@cpan.org>
COPYRIGHT
Copyright 2023 Chad Granum <exodist7@gmail.com>.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
See http://dev.perl.org/licenses/