Provided by: libcompress-raw-zlib-perl_2.204-1_amd64 
NAME
Compress::Raw::Zlib - Low-Level Interface to zlib or zlib-ng compression library
SYNOPSIS
use Compress::Raw::Zlib ;
($d, $status) = new Compress::Raw::Zlib::Deflate( [OPT] ) ;
$status = $d->deflate($input, $output) ;
$status = $d->flush($output [, $flush_type]) ;
$d->deflateReset() ;
$d->deflateParams(OPTS) ;
$d->deflateTune(OPTS) ;
$d->dict_adler() ;
$d->crc32() ;
$d->adler32() ;
$d->total_in() ;
$d->total_out() ;
$d->msg() ;
$d->get_Strategy();
$d->get_Level();
$d->get_BufSize();
($i, $status) = new Compress::Raw::Zlib::Inflate( [OPT] ) ;
$status = $i->inflate($input, $output [, $eof]) ;
$status = $i->inflateSync($input) ;
$i->inflateReset() ;
$i->dict_adler() ;
$d->crc32() ;
$d->adler32() ;
$i->total_in() ;
$i->total_out() ;
$i->msg() ;
$d->get_BufSize();
$crc = adler32($buffer [,$crc]) ;
$crc = crc32($buffer [,$crc]) ;
$crc = crc32_combine($crc1, $crc2, $len2);
$adler = adler32_combine($adler1, $adler2, $len2);
my $version = Compress::Raw::Zlib::zlib_version();
my $flags = Compress::Raw::Zlib::zlibCompileFlags();
is_zlib_native();
is_zlibng_native();
is_zlibng_compat();
is_zlibng();
DESCRIPTION
The Compress::Raw::Zlib module provides a Perl interface to the zlib or zlib-ng
compression libraries (see "SEE ALSO" for details about where to get zlib or zlib-ng).
In the text below all references to zlib are also applicable to zlib-ng unless otherwise
stated.
Compress::Raw::Zlib::Deflate
This section defines an interface that allows in-memory compression using the deflate
interface provided by zlib.
Here is a definition of the interface available:
($d, $status) = new Compress::Raw::Zlib::Deflate( [OPT] )
Initialises a deflation object.
If you are familiar with the zlib library, it combines the features of the zlib functions
"deflateInit", "deflateInit2" and "deflateSetDictionary".
If successful, it will return the initialised deflation object, $d and a $status of "Z_OK"
in a list context. In scalar context it returns the deflation object, $d, only.
If not successful, the returned deflation object, $d, will be undef and $status will hold
the a zlib error code.
The function optionally takes a number of named options specified as "Name => value"
pairs. This allows individual options to be tailored without having to specify them all in
the parameter list.
For backward compatibility, it is also possible to pass the parameters as a reference to a
hash containing the name=>value pairs.
Below is a list of the valid options:
-Level
Defines the compression level. Valid values are 0 through 9, "Z_NO_COMPRESSION",
"Z_BEST_SPEED", "Z_BEST_COMPRESSION", and "Z_DEFAULT_COMPRESSION".
The default is "Z_DEFAULT_COMPRESSION".
-Method
Defines the compression method. The only valid value at present (and the default) is
"Z_DEFLATED".
-WindowBits
To compress an RFC 1950 data stream, set "WindowBits" to a positive number between 8
and 15.
To compress an RFC 1951 data stream, set "WindowBits" to "-MAX_WBITS".
To compress an RFC 1952 data stream (i.e. gzip), set "WindowBits" to "WANT_GZIP".
For a definition of the meaning and valid values for "WindowBits" refer to the zlib
documentation for deflateInit2.
Defaults to "MAX_WBITS".
-MemLevel
For a definition of the meaning and valid values for "MemLevel" refer to the zlib
documentation for deflateInit2.
Defaults to MAX_MEM_LEVEL.
-Strategy
Defines the strategy used to tune the compression. The valid values are
"Z_DEFAULT_STRATEGY", "Z_FILTERED", "Z_RLE", "Z_FIXED" and "Z_HUFFMAN_ONLY".
The default is "Z_DEFAULT_STRATEGY".
-Dictionary
When a dictionary is specified Compress::Raw::Zlib will automatically call
"deflateSetDictionary" directly after calling "deflateInit". The Adler32 value for
the dictionary can be obtained by calling the method "$d->dict_adler()".
The default is no dictionary.
-Bufsize
Sets the initial size for the output buffer used by the "$d->deflate" and "$d->flush"
methods. If the buffer has to be reallocated to increase the size, it will grow in
increments of "Bufsize".
The default buffer size is 4096.
-AppendOutput
This option controls how data is written to the output buffer by the "$d->deflate"
and "$d->flush" methods.
If the "AppendOutput" option is set to false, the output buffers in the "$d->deflate"
and "$d->flush" methods will be truncated before uncompressed data is written to
them.
If the option is set to true, uncompressed data will be appended to the output buffer
in the "$d->deflate" and "$d->flush" methods.
This option defaults to false.
-CRC32
If set to true, a crc32 checksum of the uncompressed data will be calculated. Use the
"$d->crc32" method to retrieve this value.
This option defaults to false.
-ADLER32
If set to true, an adler32 checksum of the uncompressed data will be calculated. Use
the "$d->adler32" method to retrieve this value.
This option defaults to false.
Here is an example of using the "Compress::Raw::Zlib::Deflate" optional parameter list to
override the default buffer size and compression level. All other options will take their
default values.
my $d = new Compress::Raw::Zlib::Deflate ( -Bufsize => 300,
-Level => Z_BEST_SPEED ) ;
$status = $d->deflate($input, $output)
Deflates the contents of $input and writes the compressed data to $output.
The $input and $output parameters can be either scalars or scalar references.
When finished, $input will be completely processed (assuming there were no errors). If the
deflation was successful it writes the deflated data to $output and returns a status value
of "Z_OK".
On error, it returns a zlib error code.
If the "AppendOutput" option is set to true in the constructor for the $d object, the
compressed data will be appended to $output. If it is false, $output will be truncated
before any compressed data is written to it.
Note: This method will not necessarily write compressed data to $output every time it is
called. So do not assume that there has been an error if the contents of $output is empty
on returning from this method. As long as the return code from the method is "Z_OK", the
deflate has succeeded.
$status = $d->flush($output [, $flush_type])
Typically used to finish the deflation. Any pending output will be written to $output.
Returns "Z_OK" if successful.
Note that flushing can seriously degrade the compression ratio, so it should only be used
to terminate a decompression (using "Z_FINISH") or when you want to create a full flush
point (using "Z_FULL_FLUSH").
By default the "flush_type" used is "Z_FINISH". Other valid values for "flush_type" are
"Z_NO_FLUSH", "Z_PARTIAL_FLUSH", "Z_SYNC_FLUSH" and "Z_FULL_FLUSH". It is strongly
recommended that you only set the "flush_type" parameter if you fully understand the
implications of what it does. See the "zlib" documentation for details.
If the "AppendOutput" option is set to true in the constructor for the $d object, the
compressed data will be appended to $output. If it is false, $output will be truncated
before any compressed data is written to it.
$status = $d->deflateReset()
This method will reset the deflation object $d. It can be used when you are compressing
multiple data streams and want to use the same object to compress each of them. It should
only be used once the previous data stream has been flushed successfully, i.e. a call to
"$d->flush(Z_FINISH)" has returned "Z_OK".
Returns "Z_OK" if successful.
$status = $d->deflateParams([OPT])
Change settings for the deflate object $d.
The list of the valid options is shown below. Options not specified will remain unchanged.
-Level
Defines the compression level. Valid values are 0 through 9, "Z_NO_COMPRESSION",
"Z_BEST_SPEED", "Z_BEST_COMPRESSION", and "Z_DEFAULT_COMPRESSION".
-Strategy
Defines the strategy used to tune the compression. The valid values are
"Z_DEFAULT_STRATEGY", "Z_FILTERED" and "Z_HUFFMAN_ONLY".
-BufSize
Sets the initial size for the output buffer used by the "$d->deflate" and "$d->flush"
methods. If the buffer has to be reallocated to increase the size, it will grow in
increments of "Bufsize".
$status = $d->deflateTune($good_length, $max_lazy, $nice_length, $max_chain)
Tune the internal settings for the deflate object $d. This option is only available if you
are running zlib 1.2.2.3 or better.
Refer to the documentation in zlib.h for instructions on how to fly "deflateTune".
$d->dict_adler()
Returns the adler32 value for the dictionary.
$d->crc32()
Returns the crc32 value for the uncompressed data to date.
If the "CRC32" option is not enabled in the constructor for this object, this method will
always return 0;
$d->adler32()
Returns the adler32 value for the uncompressed data to date.
$d->msg()
Returns the last error message generated by zlib.
$d->total_in()
Returns the total number of bytes uncompressed bytes input to deflate.
$d->total_out()
Returns the total number of compressed bytes output from deflate.
$d->get_Strategy()
Returns the deflation strategy currently used. Valid values are "Z_DEFAULT_STRATEGY",
"Z_FILTERED" and "Z_HUFFMAN_ONLY".
$d->get_Level()
Returns the compression level being used.
$d->get_BufSize()
Returns the buffer size used to carry out the compression.
Example
Here is a trivial example of using "deflate". It simply reads standard input, deflates it
and writes it to standard output.
use strict ;
use warnings ;
use Compress::Raw::Zlib ;
binmode STDIN;
binmode STDOUT;
my $x = new Compress::Raw::Zlib::Deflate
or die "Cannot create a deflation stream\n" ;
my ($output, $status) ;
while (<>)
{
$status = $x->deflate($_, $output) ;
$status == Z_OK
or die "deflation failed\n" ;
print $output ;
}
$status = $x->flush($output) ;
$status == Z_OK
or die "deflation failed\n" ;
print $output ;
Compress::Raw::Zlib::Inflate
This section defines an interface that allows in-memory uncompression using the inflate
interface provided by zlib.
Here is a definition of the interface:
($i, $status) = new Compress::Raw::Zlib::Inflate( [OPT] )
Initialises an inflation object.
In a list context it returns the inflation object, $i, and the zlib status code ($status).
In a scalar context it returns the inflation object only.
If successful, $i will hold the inflation object and $status will be "Z_OK".
If not successful, $i will be undef and $status will hold the zlib error code.
The function optionally takes a number of named options specified as "-Name => value"
pairs. This allows individual options to be tailored without having to specify them all in
the parameter list.
For backward compatibility, it is also possible to pass the parameters as a reference to a
hash containing the "name=>value" pairs.
Here is a list of the valid options:
-WindowBits
To uncompress an RFC 1950 data stream, set "WindowBits" to a positive number between
8 and 15.
To uncompress an RFC 1951 data stream, set "WindowBits" to "-MAX_WBITS".
To uncompress an RFC 1952 data stream (i.e. gzip), set "WindowBits" to "WANT_GZIP".
To auto-detect and uncompress an RFC 1950 or RFC 1952 data stream (i.e. gzip), set
"WindowBits" to "WANT_GZIP_OR_ZLIB".
For a full definition of the meaning and valid values for "WindowBits" refer to the
zlib documentation for inflateInit2.
Defaults to "MAX_WBITS".
-Bufsize
Sets the initial size for the output buffer used by the "$i->inflate" method. If the
output buffer in this method has to be reallocated to increase the size, it will grow
in increments of "Bufsize".
Default is 4096.
-Dictionary
The default is no dictionary.
-AppendOutput
This option controls how data is written to the output buffer by the "$i->inflate"
method.
If the option is set to false, the output buffer in the "$i->inflate" method will be
truncated before uncompressed data is written to it.
If the option is set to true, uncompressed data will be appended to the output buffer
by the "$i->inflate" method.
This option defaults to false.
-CRC32
If set to true, a crc32 checksum of the uncompressed data will be calculated. Use the
"$i->crc32" method to retrieve this value.
This option defaults to false.
-ADLER32
If set to true, an adler32 checksum of the uncompressed data will be calculated. Use
the "$i->adler32" method to retrieve this value.
This option defaults to false.
-ConsumeInput
If set to true, this option will remove compressed data from the input buffer of the
"$i->inflate" method as the inflate progresses.
This option can be useful when you are processing compressed data that is embedded in
another file/buffer. In this case the data that immediately follows the compressed
stream will be left in the input buffer.
This option defaults to true.
-LimitOutput
The "LimitOutput" option changes the behavior of the "$i->inflate" method so that the
amount of memory used by the output buffer can be limited.
When "LimitOutput" is used the size of the output buffer used will either be the
value of the "Bufsize" option or the amount of memory already allocated to $output,
whichever is larger. Predicting the output size available is tricky, so don't rely on
getting an exact output buffer size.
When "LimitOutout" is not specified "$i->inflate" will use as much memory as it takes
to write all the uncompressed data it creates by uncompressing the input buffer.
If "LimitOutput" is enabled, the "ConsumeInput" option will also be enabled.
This option defaults to false.
See "The LimitOutput option" for a discussion on why "LimitOutput" is needed and how
to use it.
Here is an example of using an optional parameter to override the default buffer size.
my ($i, $status) = new Compress::Raw::Zlib::Inflate( -Bufsize => 300 ) ;
$status = $i->inflate($input, $output [,$eof])
Inflates the complete contents of $input and writes the uncompressed data to $output. The
$input and $output parameters can either be scalars or scalar references.
Returns "Z_OK" if successful and "Z_STREAM_END" if the end of the compressed data has been
successfully reached.
If not successful $status will hold the zlib error code.
If the "ConsumeInput" option has been set to true when the "Compress::Raw::Zlib::Inflate"
object is created, the $input parameter is modified by "inflate". On completion it will
contain what remains of the input buffer after inflation. In practice, this means that
when the return status is "Z_OK" the $input parameter will contain an empty string, and
when the return status is "Z_STREAM_END" the $input parameter will contains what (if
anything) was stored in the input buffer after the deflated data stream.
This feature is useful when processing a file format that encapsulates a compressed data
stream (e.g. gzip, zip) and there is useful data immediately after the deflation stream.
If the "AppendOutput" option is set to true in the constructor for this object, the
uncompressed data will be appended to $output. If it is false, $output will be truncated
before any uncompressed data is written to it.
The $eof parameter needs a bit of explanation.
Prior to version 1.2.0, zlib assumed that there was at least one trailing byte immediately
after the compressed data stream when it was carrying out decompression. This normally
isn't a problem because the majority of zlib applications guarantee that there will be
data directly after the compressed data stream. For example, both gzip (RFC 1950) and zip
both define trailing data that follows the compressed data stream.
The $eof parameter only needs to be used if all of the following conditions apply
1. You are either using a copy of zlib that is older than version 1.2.0 or you want your
application code to be able to run with as many different versions of zlib as
possible.
2. You have set the "WindowBits" parameter to "-MAX_WBITS" in the constructor for this
object, i.e. you are uncompressing a raw deflated data stream (RFC 1951).
3. There is no data immediately after the compressed data stream.
If all of these are the case, then you need to set the $eof parameter to true on the final
call (and only the final call) to "$i->inflate".
If you have built this module with zlib >= 1.2.0, the $eof parameter is ignored. You can
still set it if you want, but it won't be used behind the scenes.
$status = $i->inflateSync($input)
This method can be used to attempt to recover good data from a compressed data stream that
is partially corrupt. It scans $input until it reaches either a full flush point or the
end of the buffer.
If a full flush point is found, "Z_OK" is returned and $input will be have all data up to
the flush point removed. This data can then be passed to the "$i->inflate" method to be
uncompressed.
Any other return code means that a flush point was not found. If more data is available,
"inflateSync" can be called repeatedly with more compressed data until the flush point is
found.
Note full flush points are not present by default in compressed data streams. They must
have been added explicitly when the data stream was created by calling
"Compress::Deflate::flush" with "Z_FULL_FLUSH".
$status = $i->inflateReset()
This method will reset the inflation object $i. It can be used when you are uncompressing
multiple data streams and want to use the same object to uncompress each of them.
Returns "Z_OK" if successful.
$i->dict_adler()
Returns the adler32 value for the dictionary.
$i->crc32()
Returns the crc32 value for the uncompressed data to date.
If the "CRC32" option is not enabled in the constructor for this object, this method will
always return 0;
$i->adler32()
Returns the adler32 value for the uncompressed data to date.
If the "ADLER32" option is not enabled in the constructor for this object, this method
will always return 0;
$i->msg()
Returns the last error message generated by zlib.
$i->total_in()
Returns the total number of bytes compressed bytes input to inflate.
$i->total_out()
Returns the total number of uncompressed bytes output from inflate.
$d->get_BufSize()
Returns the buffer size used to carry out the decompression.
Examples
Here is an example of using "inflate".
use strict ;
use warnings ;
use Compress::Raw::Zlib;
my $x = new Compress::Raw::Zlib::Inflate()
or die "Cannot create a inflation stream\n" ;
my $input = '' ;
binmode STDIN;
binmode STDOUT;
my ($output, $status) ;
while (read(STDIN, $input, 4096))
{
$status = $x->inflate($input, $output) ;
print $output ;
last if $status != Z_OK ;
}
die "inflation failed\n"
unless $status == Z_STREAM_END ;
The next example show how to use the "LimitOutput" option. Notice the use of two nested
loops in this case. The outer loop reads the data from the input source - STDIN and the
inner loop repeatedly calls "inflate" until $input is exhausted, we get an error, or the
end of the stream is reached. One point worth remembering is by using the "LimitOutput"
option you also get "ConsumeInput" set as well - this makes the code below much simpler.
use strict ;
use warnings ;
use Compress::Raw::Zlib;
my $x = new Compress::Raw::Zlib::Inflate(LimitOutput => 1)
or die "Cannot create a inflation stream\n" ;
my $input = '' ;
binmode STDIN;
binmode STDOUT;
my ($output, $status) ;
OUTER:
while (read(STDIN, $input, 4096))
{
do
{
$status = $x->inflate($input, $output) ;
print $output ;
last OUTER
unless $status == Z_OK || $status == Z_BUF_ERROR ;
}
while ($status == Z_OK && length $input);
}
die "inflation failed\n"
unless $status == Z_STREAM_END ;
CHECKSUM FUNCTIONS
Two functions are provided by zlib to calculate checksums. For the Perl interface, the
order of the two parameters in both functions has been reversed. This allows both running
checksums and one off calculations to be done.
$crc = adler32($buffer [,$crc]) ;
$crc = crc32($buffer [,$crc]) ;
The buffer parameters can either be a scalar or a scalar reference.
If the $crc parameters is "undef", the crc value will be reset.
If you have built this module with zlib 1.2.3 or better, two more CRC-related functions
are available.
$crc = crc32_combine($crc1, $crc2, $len2);
$adler = adler32_combine($adler1, $adler2, $len2);
These functions allow checksums to be merged. Refer to the zlib documentation for more
details.
Misc
my $version = Compress::Raw::Zlib::zlib_version();
Returns the version of the zlib library if this module has been built with the zlib
library. If this module has been built with zlib-ng in native mode, this function will
return a empty string. If this module has been built with zlib-ng in compat mode, this
function will return the Izlib> API verion that zlib-ng is supporting.
my $version = Compress::Raw::Zlib::zlibng_version();
Returns the version of the zlib-ng library if this module has been built with the zlib-ng
library. If this module has been built with zlib, this function will return a empty
string.
my $flags = Compress::Raw::Zlib::zlibCompileFlags();
Returns the flags indicating compile-time options that were used to build the zlib or
zlib-ng library. See the zlib documentation for a description of the flags returned by
"zlibCompileFlags".
Note that when the zlib sources are built along with this module the "sprintf" flags (bits
24, 25 and 26) should be ignored.
If you are using zlib 1.2.0 or older, "zlibCompileFlags" will return 0.
is_zlib_native(); =head2 is_zlibng_native(); =head2 is_zlibng_compat(); =head2 is_zlibng();
These function can use used to check if "Compress::Raw::Zlib" was been built with zlib or
zlib-ng.
The function "is_zlib_native" returns true if "Compress::Raw::Zlib" was built with zlib.
The function "is_zlibng" returns true if "Compress::Raw::Zlib" was built with zlib-ng.
The zlib-ng library has an option to build with a zlib-compataible API. The
c<is_zlibng_compat> function retuens true if zlib-ng has ben built with this API.
Finally, "is_zlibng_native" returns true if zlib-ng was built with its native API.
The LimitOutput option.
By default "$i->inflate($input, $output)" will uncompress all data in $input and write all
of the uncompressed data it has generated to $output. This makes the interface to
"inflate" much simpler - if the method has uncompressed $input successfully all compressed
data in $input will have been dealt with. So if you are reading from an input source and
uncompressing as you go the code will look something like this
use strict ;
use warnings ;
use Compress::Raw::Zlib;
my $x = new Compress::Raw::Zlib::Inflate()
or die "Cannot create a inflation stream\n" ;
my $input = '' ;
my ($output, $status) ;
while (read(STDIN, $input, 4096))
{
$status = $x->inflate($input, $output) ;
print $output ;
last if $status != Z_OK ;
}
die "inflation failed\n"
unless $status == Z_STREAM_END ;
The points to note are
• The main processing loop in the code handles reading of compressed data from STDIN.
• The status code returned from "inflate" will only trigger termination of the main
processing loop if it isn't "Z_OK". When "LimitOutput" has not been used the "Z_OK"
status means that the end of the compressed data stream has been reached or there has
been an error in uncompression.
• After the call to "inflate" all of the uncompressed data in $input will have been
processed. This means the subsequent call to "read" can overwrite it's contents
without any problem.
For most use-cases the behavior described above is acceptable (this module and it's
predecessor, "Compress::Zlib", have used it for over 10 years without an issue), but in a
few very specific use-cases the amount of memory required for $output can prohibitively
large. For example, if the compressed data stream contains the same pattern repeated
thousands of times, a relatively small compressed data stream can uncompress into hundreds
of megabytes. Remember "inflate" will keep allocating memory until all the uncompressed
data has been written to the output buffer - the size of $output is unbounded.
The "LimitOutput" option is designed to help with this use-case.
The main difference in your code when using "LimitOutput" is having to deal with cases
where the $input parameter still contains some uncompressed data that "inflate" hasn't
processed yet. The status code returned from "inflate" will be "Z_OK" if uncompression
took place and "Z_BUF_ERROR" if the output buffer is full.
Below is typical code that shows how to use "LimitOutput".
use strict ;
use warnings ;
use Compress::Raw::Zlib;
my $x = new Compress::Raw::Zlib::Inflate(LimitOutput => 1)
or die "Cannot create a inflation stream\n" ;
my $input = '' ;
binmode STDIN;
binmode STDOUT;
my ($output, $status) ;
OUTER:
while (read(STDIN, $input, 4096))
{
do
{
$status = $x->inflate($input, $output) ;
print $output ;
last OUTER
unless $status == Z_OK || $status == Z_BUF_ERROR ;
}
while ($status == Z_OK && length $input);
}
die "inflation failed\n"
unless $status == Z_STREAM_END ;
Points to note this time:
• There are now two nested loops in the code: the outer loop for reading the compressed
data from STDIN, as before; and the inner loop to carry out the uncompression.
• There are two exit points from the inner uncompression loop.
Firstly when "inflate" has returned a status other than "Z_OK" or "Z_BUF_ERROR".
This means that either the end of the compressed data stream has been reached
("Z_STREAM_END") or there is an error in the compressed data. In either of these
cases there is no point in continuing with reading the compressed data, so both loops
are terminated.
The second exit point tests if there is any data left in the input buffer, $input -
remember that the "ConsumeInput" option is automatically enabled when "LimitOutput"
is used. When the input buffer has been exhausted, the outer loop can run again and
overwrite a now empty $input.
ACCESSING ZIP FILES
Although it is possible (with some effort on your part) to use this module to access .zip
files, there are other perl modules available that will do all the hard work for you.
Check out "Archive::Zip", "Archive::Zip::SimpleZip", "IO::Compress::Zip" and
"IO::Uncompress::Unzip".
FAQ
Compatibility with Unix compress/uncompress.
This module is not compatible with Unix "compress".
If you have the "uncompress" program available, you can use this to read compressed files
open F, "uncompress -c $filename |";
while (<F>)
{
...
Alternatively, if you have the "gunzip" program available, you can use this to read
compressed files
open F, "gunzip -c $filename |";
while (<F>)
{
...
and this to write compress files, if you have the "compress" program available
open F, "| compress -c $filename ";
print F "data";
...
close F ;
Accessing .tar.Z files
See previous FAQ item.
If the "Archive::Tar" module is installed and either the "uncompress" or "gunzip" programs
are available, you can use one of these workarounds to read ".tar.Z" files.
Firstly with "uncompress"
use strict;
use warnings;
use Archive::Tar;
open F, "uncompress -c $filename |";
my $tar = Archive::Tar->new(*F);
...
and this with "gunzip"
use strict;
use warnings;
use Archive::Tar;
open F, "gunzip -c $filename |";
my $tar = Archive::Tar->new(*F);
...
Similarly, if the "compress" program is available, you can use this to write a ".tar.Z"
file
use strict;
use warnings;
use Archive::Tar;
use IO::File;
my $fh = new IO::File "| compress -c >$filename";
my $tar = Archive::Tar->new();
...
$tar->write($fh);
$fh->close ;
Zlib Library Version Support
By default "Compress::Raw::Zlib" will build with a private copy of version 1.2.5 of the
zlib library. (See the README file for details of how to override this behaviour)
If you decide to use a different version of the zlib library, you need to be aware of the
following issues
• First off, you must have zlib 1.0.5 or better.
• You need to have zlib 1.2.1 or better if you want to use the "-Merge" option with
"IO::Compress::Gzip", "IO::Compress::Deflate" and "IO::Compress::RawDeflate".
CONSTANTS
All the zlib constants are automatically imported when you make use of
Compress::Raw::Zlib.
SUPPORT
General feedback/questions/bug reports should be sent to
<https://github.com/pmqs/Compress-Raw-Zlib/issues> (preferred) or
<https://rt.cpan.org/Public/Dist/Display.html?Name=Compress-Raw-Zlib>.
SEE ALSO
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate,
IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Uncompress::RawInflate,
IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma,
IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzip, IO::Uncompress::UnLzip,
IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
IO::Compress::Zstd, IO::Uncompress::UnZstd, IO::Uncompress::AnyInflate,
IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see <https://datatracker.ietf.org/doc/html/rfc1950>,
<https://datatracker.ietf.org/doc/html/rfc1951> and
<https://datatracker.ietf.org/doc/html/rfc1952>
The zlib compression library was written by Jean-loup Gailly "gzip@prep.ai.mit.edu" and
Mark Adler "madler@alumni.caltech.edu".
The primary site for the zlib compression library is <http://www.zlib.org>.
The primary site for the zlib-ng compression library is
<https://github.com/zlib-ng/zlib-ng>.
The primary site for gzip is <http://www.gzip.org>.
AUTHOR
This module was written by Paul Marquess, "pmqs@cpan.org".
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2023 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.