Provided by: libconfig-std-perl_0.903-3_all 
NAME
Config::Std - Load and save configuration files in a standard format
VERSION
This document describes Config::Std version 0.903
SYNOPSIS
use Config::Std;
# Load named config file into specified hash...
read_config 'demo2.cfg' => my %config;
# Extract the value of a key/value pair from a specified section...
$config_value = $config{Section_label}{key};
# Change (or create) the value of a key/value pair...
$config{Other_section_label}{other_key} = $new_val;
# Update the config file from which this hash was loaded...
write_config %config;
# Write the config information to another file as well...
write_config %config, $other_file_name;
DESCRIPTION
This module implements yet another damn configuration-file system.
The configuration language is deliberately simple and limited, and the module works hard
to preserve as much information (section order, comments, etc.) as possible when a
configuration file is updated.
The whole point of Config::Std is to encourage use of one standard layout and syntax in
config files. Damian says "I could have gotten away with it, I would have only allowed one
separator. But it proved impossible to choose between ":" and "=" (half the people I asked
wanted one, half wanted the other)." Providing round-trip file re-write is the spoonful
of sugar to help the medicine go down. The supported syntax is within the general INI
file family
See Chapter 19 of "Perl Best Practices" (O'Reilly, 2005) for more detail on the rationale
for this approach.
Configuration language
The configuration language is a slight extension of the Windows INI format.
Comments
A comment starts with a "#" character (Perl-style) or a ";" character (INI-style), and
runs to the end of the same line:
# This is a comment
; Ywis, eke hight thilke
Comments can be placed almost anywhere in a configuration file, except inside a section
label, or in the key or value of a configuration variable:
# Valid comment
[ # Not a comment, just a weird section label ]
; Valid comment
key: value ; Not a comment, just part of the value
NOTE BENE -- that last is a BAD EXAMPLE of what is NOT supported. This module supports
full-line comments only, not on same line with semantic content.
Sections
A configuration file consists of one or more sections, each of which is introduced by a
label in square brackets:
[SECTION1] # Almost anything is a valid section label
[SECTION 2] # Internal whitespace is allowed (except newlines)
[%^$%^&!!!] # The label doesn't have to be alphanumeric
[ETC. ETC. AS MANY AS YOU WANT]
The only restriction on section labels is that they must be by themselves on a single line
(except for any surrounding whitespace or trailing comments), and they cannot contain the
character "]".
Every line after a given section label until the next section label (or the end of the
config file) belongs to the given section label. If no section label is currently in
effect, the current section has an empty label. In other words, there is an implicit:
[] # Label is the empty string
at the start of each config file.
Configuration variables
Each non-empty line within a section must consist of the specification of a configuration
variable. Each such variable consists of a key and a string value. For example:
name: George
age: 47
his weight! : 185
The key consists of every character (including internal whitespace) from the start of the
line until the key/value separator. So, the previous example declares three keys: 'name',
'age', and 'his weight!'.
Note that whitespace before and after the key is removed. This makes it easier to format
keys cleanly:
name : George
age : 47
his weight! : 185
The key/value separator can be either a colon (as above) or an equals sign, like so:
name= George
age= 47
his weight! = 185
Both types of separators can be used in the same file, but neither can be used as part of
a key. Newlines are not allowed in keys either.
When writing out a config file, Config::Std tries to preserve whichever separator was used
in the original data (if that data was read in). New data (created by code not parsed by
"read_config") is written back with a colon as its default separator, unless you specify
the only other separator value '=' when the module is loaded:
use Config::Std { def_sep => '=' };
Note that this does not change read-in parsing, does not change punctuation for values
that were parsed, and will not allow values other than '=' or ':'.
Everything from the first non-whitespace character after the separator, up to the end of
the line, is treated as the value for the config variable. So all of the above examples
define the same three values: 'George', '47', and '185'.
In other words, any whitespace immediately surrounding the separator character is part of
the separator, not part of the key or value.
Note that you can't put a comment on the same line as a configuration variable. The "#
etc." is simply considered part of the value:
[Delimiters]
block delims: { }
string delims: " "
comment delims: # \n
You can comment a config var on the preceding or succeeding line:
[Delimiters]
# Use braces to delimit blocks...
block delims: { }
# Use double quotes to delimit strings
string delims: " "
# Use octothorpe/newline to delimit comments
comment delims: # \n
Multi-line configuration values
A single value can be continued over two or more lines. If the line immediately after a
configuration variable starts with the separator character used in the variable's
definition, then the value of the variable continues on that line. For example:
address: 742 Evergreen Terrace
: Springfield
: USA
The newlines then form part of the value, so the value specified in the previous example
is: "742 Evergreen Terrace\nSpringfield\nUSA"
Note that the second and subsequent lines of a continued value are considered to start
where the whitespace after the original separator finished, not where the whitespace after
their own separator finishes. For example, if the previous example had been:
address: 742 Evergreen Terrace
: Springfield
: USA
then the value would be:
"742 Evergreen Terrace\n Springfield\n USA"
If a continuation line has less leading whitespace that the first line:
address: 742 Evergreen Terrace
: Springfield
: USA
it's treated as having no leading whitespace:
"742 Evergreen Terrace\nSpringfield\nUSA"
Multi-part configuration values
If the particular key appears more than once in the same section, it is considered to be
part of the same configuration variable. The value of that configuration value is then a
list, containing all the individual values for each instance of the key. For example,
given the definition:
cast: Homer
cast: Marge
cast: Lisa
cast: Bart
cast: Maggie
the corresponding value of the 'cast' configuration variable is:
"['Homer', 'Marge', 'Lisa', 'Bart', 'Maggie']"
Individual values in a multi-part list can also be multi-line (see above). For example,
given:
extras: Moe
: (the bartender)
extras: Smithers
: (the dogsbody)
the value for the 'extras' config variable is:
"["Moe\n(the bartender)", "Smithers\n(the dogsbody)"]"
Internal representation
Each section label in a configuration file becomes a top-level hash key when the
configuration file is read in. The corresponding value is a nested hash reference.
Each configuration variable's key becomes a key in that nested hash reference. Each
configuration variable's value becomes the corresponding value in that nested hash
reference.
Single-line and multi-line values become strings. Multi-part values become references to
arrays of strings.
For example, the following configuration file:
# A simple key (just an identifier)...
simple : simple value
# A more complex key (with whitespace)...
more complex key : more complex value
# A new section...
[MULTI-WHATEVERS]
# A value spread over several lines...
multi-line : this is line 1
: this is line 2
: this is line 3
# Several values for the same key...
multi-value: this is value 1
multi-value: this is value 2
multi-value: this is value 3
would be read into a hash whose internal structure looked like this:
{
# Default section...
'' => {
'simple' => 'simple value',
'more complex key' => 'more complex value',
},
# Named section...
'MULTI-WHATEVERS' => {
'multi-line' => "this is line 1\nthis is line 2\nthis is line 3",
'multi-value' => [ 'this is value 1',
'this is value 2',
'this is value 3'
],
}
}
INTERFACE
The following subroutines are exported automatically whenever the module is loaded...
"read_config($filename => %config_hash)"
"read_config($filename => $config_hash_ref)"
"read_config($string_ref => %config_hash_or_ref)"
The "read_config()" subroutine takes two arguments: the filename of a configuration
file, and a variable into which the contents of that configuration file are to be
loaded.
If the variable is a hash, then the configuration sections and their key/value pairs
are loaded into nested subhashes of the hash.
If the variable is a scalar with an undefined value, a reference to an anonymous hash
is first assigned to that scalar, and that hash is then filled as described above.
The subroutine returns true on success, and throws an exception on failure.
If you pass a reference to the string as the first argument to "read_config()" it uses
that string as the source of the config info. For example:
use Config::Std;
# here we load the config text to a scalar
my $cfg = q{
[Section 1]
attr1 = at
attr2 = bat
[Section 2]
attr3 = cat
};
# here we parse the config from that scalar by passing a reference to it.
read_config( \$cfg, my %config );
use Data::Dumper 'Dumper';
warn Dumper [ \%config ];
"write_config(%config_hash => $filename)"
"write_config($config_hash_ref => $filename)"
"write_config(%config_hash)"
"write_config($config_hash_ref)"
The "write_config()" subroutine takes two arguments: the hash or hash reference
containing the configuration data to be written out to disk, and an optional filename
specifying which file it is to be written to.
The data hash must conform to the two-level structure described earlier: with top-
level keys naming sections and their values being references to second-level hashes
that store the keys and values of the configuartion variables. If the structure of the
hash differs from this, an exception is thrown.
If a filename is also specified, the subroutine opens that file and writes to it. It
no filename is specified, the subroutine uses the name of the file from which the hash
was originally loaded using "read_config()". It no filename is specified and the hash
wasn't originally loaded using "read_config()", an exception is thrown.
The subroutine returns true on success and throws and exception on failure.
If necessary (typically to avoid conflicts with other modules), you can have the module
export its two subroutines with different names by loading it with the appropriate
options:
use Config::Std { read_config => 'get_ini', write_config => 'update_ini' };
# and later...
get_ini($filename => %config_hash);
# and later still...
update_ini(%config_hash);
You can also control how much spacing the module puts between single- line values when
they are first written to a file, by using the "def_gap" option:
# No empty line between single-line config values...
use Config::Std { def_gap => 0 };
# An empty line between all single-line config values...
use Config::Std { def_gap => 1 };
Regardless of the value passed for "def_gap", new multi-line values are always written
with an empty line above and below them. Likewise, values that were previously read in
from a file are always written back with whatever spacing they originally had.
DIAGNOSTICS
Can't open config file '%s' (%s)
You tried to read in a configuration file, but the file you specified didn't exist.
Perhaps the filepath you specified was wrong. Or maybe your application didn't have
permission to access the file you specified.
Can't read from locked config file '$filename'
You tried to read in a configuration file, but the file you specified was being
written by someone else (they had a file lock active on it). Either try again later,
or work out who else is using the file.
Scalar second argument to 'read_config' must be empty
You passed a scalar variable as the destination into "read_config()" was supposed to
load a configuration file, but that variable already had a defined value, so
"read_config()" couldn't autovivify a new hash for you. Did you mean to pass the
subroutine a hash instead of a scalar?
Can't save %s value for key '%s' (only scalars or array refs)
You called "write_config" and passed it a hash containing a configuration variable
whose value wasn't a single string, or a list of strings. The configuration file
format supported by this module only supports those two data types as values. If you
really need to store other kinds of data in a configuration file, you should consider
using "Data::Dumper" or "YAML" instead.
Missing filename in call to write_config()
You tried to calll "write_config()" with only a configuration hash, but that hash
wasn't originally loaded using "read_config()", so "write_config()" has no idea where
to write it to. Either make sure the hash you're trying to save was originally loaded
using "read_config()", or else provide an explicit filename as the second argument to
"write_config()".
Can't open config file '%s' for writing (%s)
You tried to update or create a configuration file, but the file you specified could
not be opened for writing (for the reason given in the parentheses). This is often
caused by incorrect filepaths or lack of write permissions on a directory.
Can't write to locked config file '%s'
You tried to update or create a configuration file, but the file you specified was
being written at the time by someone else (they had a file lock active on it). Either
try again later, or work out who else is using the file.
CONFIGURATION AND ENVIRONMENT
Config::Std requires no configuration files or environment variables. (To do so would be
disturbingly recursive.)
DEPENDENCIES
This module requires the Class::Std module (available from the CPAN)
INCOMPATIBILITIES
Those variants of INI file dialect supporting partial-line comment are incompatible.
(This is the price of keeping comments when re-writing.)
BUGS AND LIMITATIONS
Memory leak re-reading
A daemon re-reading its config file has reported a memory leak.
Parallel testing not safe
This is a config file module. Tests written before "TAP" got parallel testing are
unsafe with parallel testing, surprise! Settings are now included to force serial
testing (until we refactor all tests to use temp dirs?).
If using an older Perl < 5.21.1, and Module.PL, and getting out-of-sequence test
failures installing this module, either update Test::Harness~'>= 3.31' or export
HARNESS_OPTIONS=j1 (or force/no-test, or use Build.PL and/or perl-5.22.0 or newer
instead).
Loading on demand
If you attempt to load "read_config()" and "write_config()" at runtime with "require",
you can not rely upon the prototype to convert a regular hash to a reference. To work
around this, you must explicitly pass a reference to the config hash.
require Config::Std;
Config::Std->import;
my %config;
read_config($file, \%config);
write_config(\%config, $file);
Windows line endings on Unix/Linux (RT#21547/23550)
If the config file being read contains carriage returns and line feeds at the end of
each line rather than just line feeds (i.e. the standard Windows file format, when
read on a machine expecting POSIX file format), Config::Std emits an error with
embedded newline.
Workaround is match file line-endings to locale.
This will be fixed in 1.000.
leading comment vanishes (RT#24597,)
A comment before the first section is not always retained on write-back, if the ''
default section is empty.
Please report any bugs or feature requests to "bug-config-std@rt.cpan.org", or through the
web interface at <http://rt.cpan.org>.
AUTHOR
Damian Conway "<DCONWAY@cpan.org>" Maintainers Bill Ricker "<BRICKER@cpan.org>" Tom
Metro "<tmetro@cpan.org>"
LICENCE AND COPYRIGHT
Copyright (c) 2005, Damian Conway "<DCONWAY@cpan.org>". Copyright (c) 2011,2014,2017,
D.Conway, W.Ricker "<BRICKER@cpan.org>" All rights reserved.
This module is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY
THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.