Provided by: libdate-manip-perl_6.90-1_all 
NAME
Date::Manip::Delta - Methods for working with deltas
SYNOPSIS
use Date::Manip::Delta;
$date = new Date::Manip::Delta;
DESCRIPTION
This module contains functions useful in parsing and manipulating deltas. As used in this
module, the term delta refers to an amount of time elapsed. It includes no information
about a starting or ending time.
There are several concepts involved in understanding the properties of a delta.
standard and business delta
There are two different modes for working with deltas: standard and business. The
mode used depends on how you treat the calendar.
Standard deltas use the full calendar without any modifications.
A business delta uses a calendar in the way a business might. In a business calendar,
anything outside of a business day is ignored. Typically, this includes holidays and
weekends. In addition, the part of the day outside of business hours is also ignored,
so a day may only run from 08:00 to 17:00 and everything outside of this is ignored.
The length of a work day is usually not 24 hours. It is defined by the start and end
of the work day and is set using the config variables: WorkDayBeg and WorkDayEnd
(WorkDay24Hr may be used to specify a 24-hour work day). The work week is defined
using the config variables: WorkWeekBeg and WorkWeekEnd.
Daylight saving time are ignored with business calculations because time changes occur
at night (usually on the weekends) outside of business hours. This may yield
unexpected results if the work day is defined to be 24-hours and the work week
includes a day when a time change occurs.
fields
A delta consists of 7 fields: years, months, weeks, days, hours, minutes, and seconds,
usually expressed as a colon-separated string. For example:
1:2:3:4:5:6:7
refers to an elapsed amount of time 1 year, 2 months, 3 weeks, 4 days, 5 hours, 6
minutes, and 7 seconds long.
normalized
A delta can be normalized or not. A normalized delta has values which have been
simplified based on how a human would think of them. As an example, the delta:
0:0:0:0:0:10:70
is not normalized since 70 seconds is typically thought of as 1 minute 10 seconds. The
normalized form of this delta would be:
0:0:0:0:0:11:10
By default, deltas are converted to a normalized form in most functions that
create/modify a delta, but this can be overridden.
Types of deltas
There are 4 type of deltas that are available.
Exact deltas
The most common type (and the default in most situations) is an exact delta.
An exact delta is one where only fields which have exactly known lengths are
allowed to be non-zero.
For standard calculations, there are only three exactly known fields (hours,
minutes, and seconds). The lengths are defined as:
1 hour = 3600 seconds
1 minute = 60 seconds
Note that since a day is NOT always 24 hours (due to daylight saving time
changes), a day is not an exactly known field.
For business calculations, a day IS an exactly known field. Since business
mode ignores daylight saving time, the length of the day can be calculated
based on the config variables listed above. So, for example, if the work day
is 08:00-17:00, the length of the day is 9 hours. The length of the week is
still unknown since some work weeks may have fewer days than others due to
holidays.
All fields which are not exactly known will always have zero value.
Semi-exact deltas
A semi-exact delta treats the day/week fields as if they were exactly known.
For standard calculations, this is done by using the relationships:
1 day = 24 hours
1 week = 7 days
For business calculations, it is done by treating a week as a constant length
(determined by the config variables listed above) ignoring holidays. So if a
typical work week is Mon-Fri, the length of the week is 5 days.
For semi-exact deltas, the value of the year/month must be zero.
Although this may yield some values that are not exactly accurate around
daylight saving time transitions, strictly speaking, they yield results that
are useful in terms of how humans think of deltas.
Approximate deltas
An approximate delta can have non-zero values for all fields. When
normalizing the fields, the year/month fields are treated as one set using the
relationship
1 year = 12 months
The remaining fields are normalized using the semi-exact relationships.
Estimated deltas
The final type of delta are estimated deltas. These are deltas where an
estimated length is applied to all the approximate fields.
For standard deltas, the additional relationship:
1 year = 365.2425 days
is used. For business deltas, the additional relationship:
1 year = X/7 * 365.2425 days
(where X is the number of work days in a week) is used.
Fractional seconds will be discarded (not rounded).
NOTE: it is not possible to look at a delta and determine what type it is. For
example, a standard delta with a non-zero day value might be approximate or semi-
exact. The type will need to be explicitly selected, or determined by the context of
the operation.
signs
Each field has a sign associated with it. For example, the delta "1 year ago" is
written as:
-1:0:0:0:0:0:0
The sign of any field is optional, and if omitted, it is the same as the next higher
field. So, the following are identical:
+1:2:3:4:5:6:7
+1:+2:+3:+4:+5:+6:+7
In a normalized delta, all fields in a set will have the same sign. So the standard
delta:
0:0:+3:-2:0:0:0:0 (3 weeks -2 days)
is not normalized. The normalized version would be:
0:0:+2:5:0:0:0:0 (2 weeks, 5 days)
Since an approximate delta has two sets (the y/m set and the w/d/h/mn/s set), these
deltas may have two signs. So, the following is a fully normalized approximate delta:
+1:0:-3:3:1:0:0
fractional values
Fractional fields are allowed such as:
1.25 days
1.1 years
but whenever parsing a delta with fractional fields, the delta will be normalized
using the estimated relationships described above. Fractional seconds will be
discarded.
METHODS
new
new_config
new_date
new_delta
new_recur
base
tz
is_date
is_delta
is_recur
config
err Please refer to the Date::Manip::Obj documentation for these methods.
parse
$err = $delta->parse($string, \%opts);
$err = $delta->parse($string [,$business] [,$no_normalize]);
The second format is supported for backward compatibility, but is deprecated and will
be removed in Date::Manip 7.00. The second form is equivalent to:
$err = $delta->parse($string, { business => $business,
nonorm => $no_normalize });
This takes a string and parses it to see if it is a valid delta. If it is, an error
code of 0 is returned and $delta now contains the value of the delta. Otherwise, an
error code of 1 is returned and an error condition is set in the delta.
Recognized options are:
mode : standard/business
to specify if it is a business delta or a standard delta
nonorm : 0/1
1 if the delta should not be normalized
type : exact, semi, approx, estimated
When specifying the type, the delta given must satisfy the requirements of the type
(i.e. no year field for an exact delta).
A delta string is usually specified in compact notation which consists of a colon
separated list of numbers (with optional signs):
Examples:
0:0:0:0:4:3:-2
+4:3:-2
+4::3
In compact notation, from 1 to 7 of the fields may be given. For example D:H:MN:S may
be given to specify only four of the fields. No spaces may be present in the string,
but it is allowed to omit some of the fields. For example 5::3:30 is valid. In this
case, missing fields default to the value 0.
The delta string may also be specified using common field abbreviations. This is
described below in the "ADDITIONAL DELTA NOTATIONS" section.
input
$str = $delta->input();
This returns the string that was parsed to form the delta.
set
$err = $delta->set(\%opts);
$err = $delta->set($field,$val [,$no_normalize]);
The second format is supported for backward compatibility, but is deprecated and will
be removed in Date::Manip 7.00. The second form is equivalent to:
$err = $delta->set( $field => $val, 'nonorm' => $no_normalize );
This explicitly sets one or more parts of a delta. %opts is a set of key/value pairs:
$key $val
delta [Y,M,W,D,H,MN,S] sets the entire delta
business [Y,M,W,D,H,MN,S] sets the entire delta
standard [Y,M,W,D,H,MN,S] sets the entire delta
y YEAR sets one field
M MONTH
w WEEK
d DAY
h HOUR
m MINUTE
s SECOND
nonorm 0/1
mode business, standard
type exact, semi, estimated, approx
An error is returned if an invalid data is passed in.
%opts can only include a single key that affects each field (i.e. you can set delta or
business but not both, and you cannot set both delta and y, but you CAN set both y and
w).
When setting the entire delta with business or standard, it flags the delta as a
business or standard mode delta respectively. In those cases, you are not allowed to
set the mode option. Partial deltas are allowed (i.e. [H,MN,S]) in which case zeros
are added for all fields not specified.
When setting the entire delta with delta, the flag is left unchanged (unless the mode
option is also passed in).
Also, when setting the entire delta, signs are not carried from one field to another,
so [-1,2,...] is equivalent to [-1,+2,...].
By default, a delta is normalized, but setting the nonorm key to a true value will not
do that.
For backwards compatibility, normal can be used in place of standard, both as $field
or as $val. This is deprecated and will be removed in Date::Manip 7.00.
When setting any field in the delta, the type of delta will be determined
automatically as either exact (if only fields that are exactly known are have non-zero
fields), semi (if only fields that are semi-exact or exact are included), or approx
otherwise. If the type option is set, it will be used provided it is valid (i.e. you
cannot set it to exact if fields that are not exactly known are set).
printf
$out = $delta->printf($in);
@out = $delta->printf(@in);
This takes a string or list of strings which may contain any number of special
formatting directives. These directives are replaced with information contained in the
delta. Everything else in the string is returned unmodified.
A directive always begins with '%'. They are described in the section below in the
section "PRINTF DIRECTIVES".
calc
Please refer to the Date::Manip::Calc documentation for details.
type
$flag = $delta->type($op);
This tests to see if a delta is of a certain type. $op can be;
business : returns 1 if it is a business delta
standard : returns 1 if it is a standard (non-business delta)
exact : returns 1 if it is exact
semi : returns 1 if it is semi-exact
approx : returns 1 if it is approximate
estimated : returns 1 if it is estimated
value
$val = $delta->value();
@val = $delta->value();
This returns the value of the delta. In scalar context, it returns the printable
string (equivalent to the printf directive '%Dt'). In list context, it returns a list
of fields.
An empty string/list is returned if there is no valid delta stored in $delta.
convert
$delta->convert($to);
This converts a delta from one type to another. $to can be 'exact', 'semi', or
'approx'. The conversion uses the approximate and estimated relationships listed
above to convert the delta.
For example, if the exact non-business delta $delta contains:
0:0:0:0:44:0:0
then the following call:
$delta->convert('semi')
would produce the semi-exact delta:
0:0:0:1:20:0:0
The result will always be normalized.
Converting from one type to another that is less exact (i.e. exact to semi-exact or
semi-exact to approx) is supported. Converting the other direction is supported for
backward compatibility, but will be removed in 7.00 because that operation is not one
that is well defined.
There is currently no support for converting business to non-business (or vice-versa).
cmp
$flag = $delta1->cmp($delta2);
This compares two deltas (using the approximate relationships listed above) and
returns -1, 0, or 1 which could be used to sort them by length of time.
Both deltas must be valid, and both must be either business or non-business deltas.
They do not need to be the same out of exact, semi-exact, and approximate.
undef will be returned if either delta is invalid, or you try to compare a business
and non-business delta.
ADDITIONAL DELTA NOTATIONS
When parsing a delta, the string may be specified with the field spelled out, rather than
using the colon separated fields.
This expanded notation has the fields spelled out in some language specific form:
Examples:
+4 hours +3mn -2second
+ 4 hr 3 minutes -2
4 hour + 3 min -2 s
4 hr 2 s
A field in the expanded notation has an optional sign, a number, and a string specifying
the type of field. If the sign is absent, it defaults to the sign of the next larger
element. So the following are equivalent:
-4 hr 3 min 2 sec
-4 hr -3 min -2 sec
The valid strings describing each of the fields is contained in "Delta field names"
section of the appropriate Date::Manip::Lang::<LANGUAGE> document. Refer to the
Date::Manip::Lang document for a list of languages.
For example, for English, the document is Date::Manip::Lang::English and the field names
include strings like:
y: y, yr, year, years
m: m, mon, mons, month, months
w: w, wk, ws, wks, week, weeks
d: d, day, days
h: h, hr, hrs, hour, hours
mn: mn, min, mins, minute, minutes
s: s, sec, secs, second, seconds
This list may not be complete. You should refer to the language document for the full
list.
The "seconds" string may be omitted. The sign, number, and string may all be separated
from each other by any amount of whitespace. The string specifying the unit must be
separated from a following number by whitespace or a comma, so the following example will
NOT work:
4hours3minutes
At minimum, it must be expressed as:
4hours 3minutes
4 hours, 3 minutes
In the the expanded format, all fields must be given in the order: Y M W D H MN S. Any
number of them may be omitted provided the rest remain in the correct order. Small numbers
may be spelled out, so
in two weeks
in 2 weeks
both work (but do not rely on this to work for large numbers).
Most languages also allow a word to specify whether the delta is an amount of time after
or before a fixed point. In English, the word "in" refers to a time after a fixed point,
and "ago" refers to a point before a fixed point. So, the following deltas are equivalent:
1:0:0:0:0:0:0
in 1 year
and the following are equivalent
-1:0:0:0:0:0:0
1 year ago
The word "in" is completely ignored. The word "ago" has the affect of reversing all signs
that appear in front of the components of the delta. In other words, the following two
strings are identical:
-12 yr 6 mon ago
+12 yr +6 mon
(don't forget that there is an implied minus sign in front of the 6 in the first string
because when no sign is explicitly given, it carries the previously entered sign).
The in/ago words only apply to the expanded format, so the following is invalid:
1:0:0 ago
A delta may be standard (non-business) or business. By default, a delta is treated as a
non-business delta, but this can be changed in two different ways.
The first way to make a delta be business is to pass in the appropriate option. For
example:
$delta->parse($string, { 'mode' => 'business' });
$delta->parse($string, { 'mode' => 'standard' });
The second way to specify whether a delta is business or non-business is to include a key
word in the string that is parsed. If this string is included, it should not conflict with
the value of a 'mode' option.
Most languages include a word like "business" which can be used to specify that the
resulting delta is a business delta or a non-business delta. Other languages have
equivalent words. The placement of the word is not important. Also, the "business" word
can be included with all types of deltas, and in both compact and expanded notation, so
the following are valid and equivalent:
in 4 hours business
4:0:0 business
business 0:0:0:0:4:0:0
There are also words "exact" or "approximate" which may be included in the delta for
backward compatibility. However, they will be ignored. They will be removed in
Date::Manip 7.00. The accuracy of delta (exact, semi-exact, approximate) will be
determined only by what fields are present in the delta and the options passed in. When a
delta is parsed, it is automatically normalized, unless the 'nonorm' option is passed in.
PRINTF DIRECTIVES
The following printf directives are replaced with information from the delta. Directives
may be replaced by the values of a single field in the delta (i.e. the hours or weeks
field), the value of several fields expressed in terms of one of them (i.e. the number of
years and months expressed in terms of months), or the directive may format either the
entire delta, or portions of it.
Simple directives
These are directives which print simple characters. Currently, the only one is:
%% Replaced by a single '%'
As an example:
$delta->printf('|%%|');
=> |%|
Directives to print out a single field
The following directive is used to print out the value of a single field. Spaces are
included here for clarity, but are not in the actual directive.
% [+] [pad] [width] Xv
Here, X is one of (y,M,w,d,h,m,s). The directive will print out the value for that
field.
If a '+' is included immediately after the '%', a sign will always be included. By
default, only negative values will include a sign.
'width' and 'pad' are used to set the width of the string containing the field as well
as how it is padded.
'width' is any positive integer (without a sign). If 'width' is included, it sets the
length of the output string (unless the string is already longer than that, in which
case the 'width' is ignored).
If 'pad' is included, it may be the character '<', '>', or '0'. It will be ignored if
'width' is not included, or the string is already longer than 'width'. If the
formatted delta field is shorter than 'width', it will be padded with spaces on the
left (if 'pad' is '<'), or right (if 'pad' is '>'), or it will be padded on the left
(after any sign) with zeroes (if 'pad' is '0').
In the following examples, $delta contains the delta: 1:2:3:4:5:6:7
$delta->printf('|Month: %Mv|');
=> |Month: 2|
$delta->printf('|Day: %+05dv|');
=> |Day: +0004|
$delta->printf('|Day: %+<5dv|');
=> |Day: +4|
$delta->printf('|Day: %>5sv|');
=> |Day: 7 |
Directives to print out several fields in terms of one of them
The following directive is used to print out the value of several different fields,
expressed in terms of a single field.
% [+] [pad] [width] [.precision] XYZ
Here, X, Y, and Z are each one of (y,M,w,d,h,m,s). The directive will print out the
value for fields Y through Z expressed in terms of field X.
Y must come before Z in the sequence (y,M,w,d,h,m,s) or it can be the same as Z.
So, to print the day and hour fields in terms of seconds, use the directive:
%sdh
Any time all of X, Y, and Z are from a single set of fields, exact relationships are
used.
If the X, Y, and Z fields do not all belong to the same set of fields, approximate
relationships are used.
For non-business deltas, an approximate relationship is needed to link the Y/M part of
the delta to the W/D part and a semi-approximate relationship is needed to link the
W/D part with the H/MN/S part. These relationships are:
1 day = 24 hours
1 year = 365.2425
For business deltas, the approximate and semi-approximate relationships used to link
the fields together are:
1 week = X (length of business week in days)
1 year = X/7 * 365.2425
For business deltas, the length of the day is defined using WorkDayStart and
WorkDayEnd. For non-business deltas, a day is 24 hours long (i.e. daylight saving
time is ignored).
If 'precision' is included, it is the number of decimal places to print. If it is not
included, but 'width' is included, precision will be set automatically to display the
maximum number of decimal places given 'width'.
If 'pad' is included, it may be the character '<', '>', or '0', and is used in the
same way as printing out a single field.
In the following examples, $delta contains the delta: 1:2:3:4:5:6:7
$delta->printf('|%.4Myw|');
=> |14.6900|
1 year, 2 months, 3 weeks is approximately
14.6900 months
Directives to print out portions of the delta
The following directives may be used to print out some or all of a delta.
% [+] [pad] [width] Dt
% [+] [pad] [width] DXY
The first directive will print out the entire delta.
The second will print out the delta from the X to Y fields inclusive (where X and Y
are each one of (y,M,w,d,h,m,s) and X must come before Y in the sequence).
'pad' is optional and can be either '<' or '>' meaning to pad on the left or right
with spaces. It defaults to '<'.
If a '+' is included immediately following the '%', every field will have a sign
attached. Otherwise, only the leftmost field in each set of fields will include a
sign.
$delta->printf('|%Dt|');
=> |+1:2:+3:+4:5:6:7|
$delta->printf('|%+Dyd|');
=> |+1:+2:+3:+4|
KNOWN BUGS
None known.
BUGS AND QUESTIONS
Please refer to the Date::Manip::Problems documentation for information on submitting bug
reports or questions to the author.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
AUTHOR
Sullivan Beck (sbeck@cpan.org)