Provided by: libimager-perl_1.019+dfsg-1build2_amd64 
NAME
Imager::Font - Font handling for Imager.
SYNOPSIS
use Imager;
$t1font = Imager::Font->new(file => 'pathtofont.pfb');
$ttfont = Imager::Font->new(file => 'pathtofont.ttf');
$w32font = Imager::Font->new(face => 'Times New Roman');
$blue = Imager::Color->new("#0000FF");
$font = Imager::Font->new(file => 'pathtofont.ttf',
color => $blue,
size => 30);
($neg_width,
$global_descent,
$pos_width,
$global_ascent,
$descent,
$ascent,
$advance_width,
$right_bearing) = $font->bounding_box(string=>"Foo");
my $bbox_object = $font->bounding_box(string=>"Foo");
# documented in Imager::Draw
$img->string(font => $font,
text => "Model-XYZ",
x => 15,
y => 40,
size => 40,
color => $red,
aa => 1);
DESCRIPTION
This module manages, the font object returned by Imager::Font->new will typically be of a
class derived from Imager::Font.
new This creates a font object to pass to functions that take a font argument.
$font = Imager::Font->new(file => 'denmark.ttf',
index => 0,
color => $blue,
size => 30,
aa => 1);
This creates a font which is the TrueType font denmark.ttf. It's default color is
$blue, default size is 30 pixels and it's rendered anti-aliased by default. Imager
can see which type of font a file is by looking at the suffix of the file name for the
font. A suffix of "ttf" is taken to mean a TrueType font while a suffix of "pfb" is
taken to mean a Type 1 Postscript font. If Imager cannot tell which type a font is
you can tell it explicitly by using the "type" parameter:
$t1font = Imager::Font->new(file => 'fruitcase', type => 't1');
$ttfont = Imager::Font->new(file => 'arglebarf', type => 'tt');
The "index" parameter is used to select a single face from a font file containing more
than one face, for example, from a Macintosh font suitcase or a ".dfont" file.
If any of the "color", "size" or "aa" parameters are omitted when calling
"Imager::Font->new()" the they take the following values:
color => Imager::Color->new(255, 0, 0, 0); # this default should be changed
size => 15
aa => 0
index => 0
To use Win32 fonts supply the face name of the font:
$font = Imager::Font->new(face=>'Arial Bold Italic');
There isn't any access to other logical font attributes, but this typically isn't
necessary for Win32 TrueType fonts, since you can construct the full name of the font
as above.
Other logical font attributes may be added if there is sufficient demand.
Parameters:
• "file" - name of the file to load the font from.
•
"face" - face name. This is used only under Win32 to create a GDI based font.
This is ignored if the "file" parameter is supplied.
• "type" - font driver to use. Currently the permitted values for this are:
• "tt" - FreeType 1.x driver. Supports TrueType (".ttf") fonts.
•
"t1" - T1 Lib driver. Supports Postscript Type 1 fonts. Allows for synthesis
of underline, strikethrough and overline.
• "ft2" - FreeType 2.x driver. Supports many different font formats. Also
supports the transform() method.
• "color" - the default color used with this font. Default: red.
• "size" - the default size used with this font. Default: 15.
• "utf8" - if non-zero then text supplied to $img->string(...) and
$font->bounding_box(...) is assumed to be UTF-8 encoded by default.
• "align" - the default value for the $img->string(...) "align" parameter. Default:
1.
• "vlayout" - the default value for the $img->string(...) "vlayout" parameter.
Default: 0.
• "aa" - the default value for the $im->string(...) "aa" parameter. Default: 0.
• "index" - for font file containing multiple fonts this selects which font to use.
This is useful for Macintosh "DFON" (.dfont) and suitcase font files.
If you want to use a suitcase font you will need to tell Imager to use the
FreeType 2.x driver by setting "type" to 'ft2':
my $font = Imager::Font->new(file=>$file, index => 1, type=>'ft2')
or die Imager->errstr;
Returns the new font object on success. Returns "undef" on failure and sets an error
message readable with "Imager->errstr".
bounding_box()
Returns the bounding box for the specified string. Example:
my ($neg_width,
$global_descent,
$pos_width,
$global_ascent,
$descent,
$ascent,
$advance_width,
$right_bearing) = $font->bounding_box(string => "A Fool");
my $bbox_object = $font->bounding_box(string => "A Fool");
$neg_width
the relative start of a the string. In some cases this can be a negative number,
in that case the first letter stretches to the left of the starting position that
is specified in the string method of the Imager class
$global_descent
how far down the lowest letter of the entire font reaches below the baseline (this
is often j).
$pos_width
how wide the string from the starting position is. The total width of the string
is "$pos_width-$neg_width".
$descent
$ascent
the same as <$global_descent> and <$global_ascent> except that they are only for
the characters that appear in the string.
$advance_width
the distance from the start point that the next string output should start at,
this is often the same as $pos_width, but can be different if the final character
overlaps the right side of its character cell.
$right_bearing
The distance from the right side of the final glyph to the end of the advance
width. If the final glyph overflows the advance width this value is negative.
Obviously we can stuff all the results into an array just as well:
@metrics = $font->bounding_box(string => "testing 123");
Note that extra values may be added, so $metrics[-1] isn't supported. It's possible
to translate the output by a passing coordinate to the bounding box method:
@metrics = $font->bounding_box(string => "testing 123", x=>45, y=>34);
This gives the bounding box as if the string had been put down at "(x,y)" By giving
bounding_box 'canon' as a true value it's possible to measure the space needed for the
string:
@metrics = $font->bounding_box(string=>"testing",size=>15,canon=>1);
This returns the same values in $metrics[0] and $metrics[1], but:
$bbox[2] - horizontal space taken by glyphs
$bbox[3] - vertical space taken by glyphs
Returns an Imager::Font::BBox object in scalar context, so you can avoid all those
confusing indexes. This has methods as named above, with some extra convenience
methods.
Parameters are:
• "string" - the string to calculate the bounding box for. Required.
• "size" - the font size to use. Default: value set in Imager::Font->new(), or 15.
• "sizew" - the font width to use. Default to the value of the "size" parameter.
• "utf8" - For drivers that support it, treat the string as UTF-8 encoded. For
versions of perl that support Unicode (5.6 and later), this will be enabled
automatically if the 'string' parameter is already a UTF-8 string. See "UTF-8" for
more information. Default: the "utf8" value passed to Imager::Font->new(...) or
0.
• "x", "y" - offsets applied to @box[0..3] to give you a adjusted bounding box.
Ignored in scalar context.
• "canon" - if non-zero and the "x", "y" parameters are not supplied, then
$pos_width and $global_ascent values will returned as the width and height of the
text instead.
On success returns either the list of bounds, or a bounding box object in scalar
context. Returns an empty list or "undef" on failure and sets an error message
readable with "Imager->errstr".
The transformation matrix set by "transform()" has no effect on the result of this
method - the bounds of the untransformed text is returned.
string()
The $img->string(...) method is now documented in "string()" in Imager::Draw
align(string=>$text,size=>$size,x=>...,y=>...,valign => ...,halign=>...)
Higher level text output - outputs the text aligned as specified around the given
point (x,y).
# "Hello" centered at 100, 100 in the image.
my ($left, $top, $right, $bottom) =
$font->align(string=>"Hello",
x=>100, y=>100,
halign=>'center', valign=>'center',
image=>$image);
Takes the same parameters as $font->draw(), and the following extra parameters:
• "valign" - Possible values are:
"top"
Point is at the top of the text.
"bottom"
Point is at the bottom of the text.
"baseline"
Point is on the baseline of the text (default.)
"center"
Point is vertically centered within the text.
• "halign"
• "left" - the point is at the left of the text.
• "start" - the point is at the start point of the text.
• "center" - the point is horizontally centered within the text.
• "right" - the point is at the right end of the text.
• "end" - the point is at the end point of the text.
• "image" - The image to draw to. Set to "undef" to avoid drawing but still
calculate the bounding box.
Returns a list specifying the bounds of the drawn text on success. Returns an empty
list on failure, if an "image" parameter was supplied the error message can be read
with "$image->errstr", otherwise it's available as "Imager->errstr".
dpi()
dpi(xdpi=>$xdpi, ydpi=>$ydpi)
dpi(dpi=>$dpi)
Set or retrieve the spatial resolution of the image in dots per inch. The default is
72 dpi.
This isn't implemented for all font types yet.
Possible parameters are:
• "xdpi", "ydpi" - set the horizontal and vertical resolution in dots per inch.
• "dpi" - set both horizontal and vertical resolution to this value.
Returns a list containing the previous "xdpi", "ydpi" values on success. Returns an
empty list on failure, with an error message returned in "Imager->errstr".
transform()
$font->transform(matrix=>$matrix);
Applies a transformation to the font, where matrix is an array ref of numbers
representing a 2 x 3 matrix:
[ $matrix->[0], $matrix->[1], $matrix->[2],
$matrix->[3], $matrix->[4], $matrix->[5] ]
Not all font types support transformations, these will return false.
It's possible that a driver will disable hinting if you use a transformation, to
prevent discontinuities in the transformations. See the end of the test script
t/t38ft2font.t for an example.
Currently only the ft2 (FreeType 2.x) driver supports the transform() method.
See samples/slant_text.pl for a sample using this function.
Note that the transformation is done in font co-ordinates where y increases as you
move up, not image co-ordinates where y decreases as you move up.
"transform()" has no effect on the results of "bounding_box()".
Returns true on success. Returns false on failure with the cause readable from
"Imager->errstr".
has_chars(string=>$text)
Checks if the characters in $text are defined by the font.
In a list context returns a list of true or false value corresponding to the
characters in $text, true if the character is defined, false if not. In scalar
context returns a string of "NUL" or non-"NUL" characters. Supports UTF-8 where the
font driver supports UTF-8.
Not all fonts support this method (use $font->can("has_chars") to check.)
On error, returns an empty list or undef in scalar context, and sets an error message
readable with "Imager->errstr".
• "string" - string of characters to check for. Required. Must contain at least
one character.
• "utf8" - For drivers that support it, treat the string as UTF-8 encoded. For
versions of perl that support Unicode (5.6 and later), this will be enabled
automatically if the 'string' parameter is already a UTF-8 string. See "UTF-8" for
more information. Default: the "utf8" value passed to Imager::Font->new(...) or
0.
face_name()
Returns the internal name of the face. Not all font types support this method yet, so
you should check with "$font->can("face_name")" before calling "face_name".
glyph_names(string=>$string [, utf8=>$utf8 ][, reliable_only=>0 ] );
Returns a list of glyph names for each of the characters in the string. If the
character has no name then "undef" is returned for the character.
Some font files do not include glyph names, in this case FreeType 2 will not return
any names. FreeType 1 can return standard names even if there are no glyph names in
the font.
FreeType 2 has an API function that returns true only if the font has "reliable glyph
names", unfortunately this always returns false for TrueType fonts. This can avoid
the check of this API by supplying "reliable_only" as 0. The consequences of using
this on an unknown font may be unpredictable, since the FreeType documentation doesn't
say how those name tables are unreliable, or how FT2 handles them.
Both FreeType 1.x and 2.x allow support for glyph names to not be included.
If the supplied "string" is marked as UTF-8 or the "utf8" parameter is true and the
supplied string does not contain valid UTF-8, returns an empty string and set an error
message readable from "Imager->errstr",
can_glyph_names()
As a class method, returns true if the underlying library supports returning glyph
names.
As an object method, returns true if the supplied font supports returning glyph names.
draw
This is used by Imager's string() method to implement drawing text. See "string()" in
Imager::Draw.
MULTIPLE MASTER FONTS
The FreeType 2 driver supports multiple master fonts:
is_mm()
Test if the font is a multiple master font.
mm_axes()
Returns a list of the axes that can be changes in the font. Each entry is an array
reference which contains:
1. Name of the axis.
2. minimum value for this axis.
3. maximum value for this axis
set_mm_coords(coords=>\@values)
Blends an interpolated design from the master fonts. @values must contain as many
values as there are axes in the font.
For example, to select the minimum value in each axis:
my @axes = $font->mm_axes;
my @coords = map $_->[1], @axes;
$font->set_mm_coords(coords=>\@coords);
It's possible other drivers will support multiple master fonts in the future, check if
your selected font object supports the is_mm() method using the can() method.
UTF-8
There are 2 ways of rendering Unicode characters with Imager:
• For versions of perl that support it, use perl's native UTF-8 strings. This is the
simplest method.
• Hand build your own UTF-8 encoded strings. Only recommended if your version of perl
has no UTF-8 support.
Imager won't construct characters for you, so if want to output Unicode character 00C3
"LATIN CAPITAL LETTER A WITH DIAERESIS", and your font doesn't support it, Imager will not
build it from 0041 "LATIN CAPITAL LETTER A" and 0308 "COMBINING DIAERESIS".
To check if a driver supports UTF-8 call the utf8() method:
utf8()
Return true if the font supports UTF-8.
Native UTF-8 Support
If your version of perl supports UTF-8 and the driver supports UTF-8, just use the
$im->string() method, and it should do the right thing.
Build your own
In this case you need to build your own UTF-8 encoded characters.
For example:
$x = pack("C*", 0xE2, 0x80, 0x90); # character code 0x2010 HYPHEN
You need to be careful with versions of perl that have UTF-8 support, since your string
may end up doubly UTF-8 encoded.
For example:
$x = "A\xE2\x80\x90\x41\x{2010}";
substr($x, -1, 0) = "";
# at this point $x is has the UTF-8 flag set, but has 5 characters,
# none, of which is the constructed UTF-8 character
The test script t/t38ft2font.t has a small example of this after the comment:
# an attempt using emulation of UTF-8
DRIVER CONTROL
If you don't supply a 'type' parameter to Imager::Font->new(), but you do supply a 'file'
parameter, Imager will attempt to guess which font driver to used based on the extension
of the font file.
Since some formats can be handled by more than one driver, a priority list is used to
choose which one should be used, if a given format can be handled by more than one driver.
priorities
The current priorities can be retrieved with:
@drivers = Imager::Font->priorities();
You can set new priorities and save the old priorities with:
@old = Imager::Font->priorities(@drivers);
If you supply driver names that are not currently supported, they will be ignored.
Note that by default the priority list no longer includes "tt" and "t1", so typically
you will need to have Imager::Font::FT2 installed to create fonts with Imager.
my @old = Imager::Font->priorities(qw(tt ft2 t1));
register
Registers an extra font driver. Accepts the following parameters:
• type - a brief identifier for the font driver. You can supply this value to
"Imager::Font->new()" to create fonts of this type. Required.
• class - the font class name. Imager will attempted to load this module by name.
Required.
• files - a regular expression to match against file names. If supplied this must
be a valid perl regular expression. If not supplied you can only create fonts of
this type by supplying the "type" parameter to "Imager::Font->new()"
• description - a brief description of the font driver. Defaults to the value
supplied in "class".
AUTHOR
Arnar M. Hrafnkelsson, addi@umich.edu And a great deal of help from others - see the
README for a complete list.
BUGS
The $pos_width member returned by the bounding_box() method has historically returned
different values from different drivers. The FreeType 1.x and 2.x, and the Win32 drivers
return the max of the advance width and the right edge of the right-most glyph. The Type
1 driver always returns the right edge of the right-most glyph.
The newer advance_width and right_bearing values allow access to any of the above.
REVISION
$Revision$
SEE ALSO
Imager(3), Imager::Font::FreeType2(3), Imager::Font::Type1(3), Imager::Font::Win32(3),
Imager::Font::Truetype(3), Imager::Font::BBox(3)
http://imager.perl.org/