Provided by: libmath-utils-perl_1.14-2_all 
NAME
Math::Utils - Useful mathematical functions not in Perl.
SYNOPSIS
use Math::Utils qw(:utility); # Useful functions
#
# Base 10 and base 2 logarithms.
#
$scale = log10($pagewidth);
$bits = log2(1/$probability);
#
# Two uses of sign().
#
$d = sign($z - $w);
@ternaries = sign(@coefficients);
#
# Using copysign(), $dist will be doubled negative or
# positive $offest, depending upon whether ($from - $to)
# is positive or negative.
#
my $dist = copysign(2 * $offset, $from - $to);
#
# Change increment direction if goal is negative.
#
$incr = flipsign($incr, $goal);
#
# floor() and ceil() functions.
#
$point = floor($goal);
$limit = ceil($goal);
#
# gcd() and lcm() functions.
#
$divisor = gcd(@multipliers);
$numerator = lcm(@multipliers);
#
# Safer summation.
#
$tot = fsum(@inputs);
#
# The remainders of n after successive divisions of b, or
# remainders after a set of divisions.
#
@rems = moduli($n, $b);
or
use Math::Utils qw(:compare); # Make comparison functions with tolerance.
#
# Floating point comparison function.
#
my $fltcmp = generate_fltmcp(1.0e-7);
if (&$fltcmp($x0, $x1) < 0)
{
add_left($data);
}
else
{
add_right($data);
}
#
# Or we can create single-operation comparison functions.
#
# Here we are only interested in the greater than and less than
# comparison functions.
#
my(undef, undef,
$approx_gt, undef, $approx_lt) = generate_relational(1.5e-5);
or
use Math::Utils qw(:polynomial); # Basic polynomial ops
#
# Coefficient lists run from 0th degree upward, left to right.
#
my @c1 = (1, 3, 5, 7, 11, 13, 17, 19);
my @c2 = (1, 3, 1, 7);
my @c3 = (1, -1, 1)
my $c_ref = pl_mult(\@c1, \@c2);
$c_ref = pl_add($c_ref, \@c3);
EXPORT
All functions can be exported by name, or by using the tag that they're grouped under.
utility tag
Useful, general-purpose functions, including those that originated in FORTRAN and were
implemented in Perl in the module Math::Fortran, by J. A. R. Williams.
There is a name change -- copysign() was known as sign() in Math::Fortran.
log10()
$xlog10 = log10($x);
@xlog10 = log10(@x);
Return the log base ten of the argument. A list form of the function is also provided.
log2()
$xlog2 = log2($x);
@xlog2 = log2(@x);
Return the log base two of the argument. A list form of the function is also provided.
sign()
$s = sign($x);
@valsigns = sign(@values);
Returns -1 if the argument is negative, 0 if the argument is zero, and 1 if the argument
is positive.
In list form it applies the same operation to each member of the list.
copysign()
$ms = copysign($m, $n);
$s = copysign($x);
Take the sign of the second argument and apply it to the first. Zero is considered part of
the positive signs.
copysign(-5, 0); # Returns 5.
copysign(-5, 7); # Returns 5.
copysign(-5, -7); # Returns -5.
copysign(5, -7); # Returns -5.
If there is only one argument, return -1 if the argument is negative, otherwise return 1.
For example, copysign(1, -4) and copysign(-4) both return -1.
flipsign()
$ms = flipsign($m, $n);
Multiply the signs of the arguments and apply it to the first. As with copysign(), zero is
considered part of the positive signs.
Effectively this means change the sign of the first argument if the second argument is
negative.
flipsign(-5, 0); # Returns -5.
flipsign(-5, 7); # Returns -5.
flipsign(-5, -7); # Returns 5.
flipsign(5, -7); # Returns -5.
If for some reason flipsign() is called with a single argument, that argument is returned
unchanged.
floor()
$b = floor($a/2);
@ilist = floor(@numbers);
Returns the greatest integer less than or equal to its argument. A list form of the
function also exists.
floor(1.5, 1.87, 1); # Returns (1, 1, 1)
floor(-1.5, -1.87, -1); # Returns (-2, -2, -1)
ceil()
$b = ceil($a/2);
@ilist = ceil(@numbers);
Returns the lowest integer greater than or equal to its argument. A list form of the
function also exists.
ceil(1.5, 1.87, 1); # Returns (2, 2, 1)
ceil(-1.5, -1.87, -1); # Returns (-1, -1, -1)
fsum()
Return a sum of the values in the list, done in a manner to avoid rounding and
cancellation errors. Currently this is done via Kahan's summation algorithm
<https://en.wikipedia.org/wiki/Kahan_summation_algorithm>.
softmax()
Return a list of values as probabilities.
The function takes the list, and creates a new list by raising e to each value. The
function then returns each value divided by the sum of the list. Each value in the new
list is now a set of probabilities that sum to 1.0.
The summation is performed using fsum() above.
See Softmax function <https://en.wikipedia.org/wiki/Softmax_function> at Wikipedia.
uniform_scaling
uniform_01scaling
Uniformly, or linearly, scale a number either from one range to another range
("uniform_scaling()"), or to a default range of [0 .. 1] ("uniform_01scaling()").
@v = uniform_scaling(\@original_range, \@new_range, @oldvalues);
For example, these two lines are equivalent, and both return 0:
$y = uniform_scaling([50, 100], [0, 1], 50);
$y = uniform_01scaling([50, 100], 50);
They may also be called with a list or array of numbers:
@cm_measures = uniform_scaling([0, 10000], [0, 25400], @in_measures);
@melt_centigrade = uniform_scaling([0, 2000], [-273.15, 1726.85], \@melting_points);
A number that is outside the original bounds will be proportionally changed to be outside
of the new bounds, but then again having a number outside the original bounds is probably
an error that should be checked before calling this function.
<https://stats.stackexchange.com/q/281164>
gcd
hcf
Return the greatest common divisor (also known as the highest common factor) of a list of
integers. These are simply synomyms:
$factor = gcd(@numbers);
$factor = hcf(@numbers);
lcm
Return the least common multiple of a list of integers.
$factor = lcm(@values);
moduli()
Return the moduli of an integer after repeated divisions. The remainders are returned in a
list from left to right.
@digits = moduli(1899, 10); # Returns (9, 9, 8, 1)
@rems = moduli(29, 3); # Returns (2, 0, 0, 1)
compare tag
Create comparison functions for floating point (non-integer) numbers.
Since exact comparisons of floating point numbers tend to be iffy, the comparison
functions use a tolerance chosen by you. You may then use those functions from then on
confident that comparisons will be consistent.
If you do not provide a tolerance, a default tolerance of 1.49012e-8 (approximately the
square root of an Intel Pentium's machine epsilon
<https://en.wikipedia.org/wiki/Machine_epsilon>) will be used.
generate_fltcmp()
Returns a comparison function that will compare values using a tolerance that you supply.
The generated function will return -1 if the first argument compares as less than the
second, 0 if the two arguments compare as equal, and 1 if the first argument compares as
greater than the second.
my $fltcmp = generate_fltcmp(1.5e-7);
my(@xpos) = grep {&$fltcmp($_, 0) == 1} @xvals;
generate_relational()
Returns a list of comparison functions that will compare values using a tolerance that you
supply. The generated functions will be the equivalent of the equal, not equal, greater
than, greater than or equal, less than, and less than or equal operators.
my($eq, $ne, $gt, $ge, $lt, $le) = generate_relational(1.5e-7);
my(@approx_5) = grep {&$eq($_, 5)} @xvals;
Of course, if you were only interested in not equal, you could use:
my(undef, $ne) = generate_relational(1.5e-7);
my(@not_around5) = grep {&$ne($_, 5)} @xvals;
polynomial tag
Perform some polynomial operations on plain lists of coefficients.
#
# The coefficient lists are presumed to go from low order to high:
#
@coefficients = (1, 2, 4, 8); # 1 + 2x + 4x**2 + 8x**3
In all functions the coeffcient list is passed by reference to the function, and the
functions that return coefficients all return references to a coefficient list.
It is assumed that any leading zeros in the coefficient lists have already been removed
before calling these functions, and that any leading zeros found in the returned lists
will be handled by the caller. This caveat is particularly important to note in the case
of "pl_div()".
Although these functions are convenient for simple polynomial operations, for more
advanced polynonial operations Math::Polynomial is recommended.
pl_evaluate()
Returns either a y-value for a corresponding x-value, or a list of y-values on the
polynomial for a corresponding list of x-values, using Horner's method.
$y = pl_evaluate(\@coefficients, $x);
@yvalues = pl_evaluate(\@coefficients, @xvalues);
@ctemperatures = pl_evaluate([-160/9, 5/9], @ftemperatures);
The list of X values may also include X array references:
@yvalues = pl_evaluate(\@coefficients, @xvalues, \@primes, $x, [-1, -10, -100]);
pl_dxevaluate()
($y, $dy, $ddy) = pl_dxevaluate(\@coefficients, $x);
Returns p(x), p'(x), and p"(x) of the polynomial for an x-value, using Horner's method.
Note that unlike "pl_evaluate()" above, the function can only use one x-value.
If the polynomial is a linear equation, the second derivative value will be zero.
Similarly, if the polynomial is a simple constant, the first derivative value will be
zero.
pl_translate()
$x = [8, 3, 1];
$y = [3, 1];
#
# Translating C<x**2 + 3*x + 8> by C<x + 3> returns [26, 9, 1]
#
$z = pl_translate($x, $y);
Returns a polynomial transformed by substituting a polynomial variable with another
polynomial. For example, a simple linear translation by 1 to the polynomial "x**3 + x**2
+ 4*x + 4" would be accomplished by setting x = (y - 1); resulting in "x**3 - 2*x**2 +
5*x".
$x = [4, 4, 1, 1];
$y = [-1, 1];
$z = pl_translate($x, $y); # Becomes [0, 5, -2, 1]
pl_add()
$polyn_ref = pl_add(\@m, \@n);
Add two lists of numbers as though they were polynomial coefficients.
pl_sub()
$polyn_ref = pl_sub(\@m, \@n);
Subtract the second list of numbers from the first as though they were polynomial
coefficients.
pl_div()
($q_ref, $r_ref) = pl_div(\@numerator, \@divisor);
Synthetic division for polynomials. Divides the first list of coefficients by the second
list.
Returns references to the quotient and the remainder.
Remember to check for leading zeros (which are rightmost in the list) in the returned
values. For example,
my @n = (4, 12, 9, 3);
my @d = (1, 3, 3, 1);
my($q_ref, $r_ref) = pl_div(\@n, \@d);
After division you will have returned "(3)" as the quotient, and "(1, 3, 0)" as the
remainder. In general, you will want to remove the leading zero, or for that matter values
within epsilon of zero, in the remainder.
my($q_ref, $r_ref) = pl_div($f1, $f2);
#
# Remove any leading zeros (i.e., numbers smaller in
# magnitude than machine epsilon) in the remainder.
#
my @remd = @{$r_ref};
pop @remd while (@remd and abs($remd[$#remd]) < $epsilon);
$f1 = $f2;
$f2 = [@remd];
If $f1 and $f2 were to go through that bit of code again, not removing the leading zeros
would lead to a divide-by-zero error.
If either list of coefficients is empty, pl_div() returns undefs for both quotient and
remainder.
pl_mult()
$m_ref = pl_mult(\@coefficients1, \@coefficients2);
Returns the reference to the product of the two multiplicands.
pl_derivative()
$poly_ref = pl_derivative(\@coefficients);
Returns the derivative of a polynomial.
pl_antiderivative()
$poly_ref = pl_antiderivative(\@coefficients);
Returns the antiderivative of a polynomial. The constant value is always set to zero and
will need to be changed by the caller if a different constant is needed.
my @coefficients = (1, 2, -3, 2);
my $integral = pl_antiderivative(\@coefficients);
#
# Integral needs to be 0 at x = 1.
#
my @coeff1 = @{$integral};
$coeff1[0] = - pl_evaluate($integral, 1);
AUTHOR
John M. Gamble, "<jgamble at cpan.org>"
SEE ALSO
Math::Polynomial for a complete set of polynomial operations, with the added convenience
that objects bring.
Among its other functions, List::Util has the mathematically useful functions max(),
min(), product(), sum(), and sum0().
List::MoreUtils has the function minmax().
Math::Prime::Util has gcd() and lcm() functions, as well as vecsum(), vecprod(), vecmin(),
and vecmax(), which are like the List::Util functions but which can force integer use, and
when appropriate use Math::BigInt.
Math::VecStat Likewise has min(), max(), sum() (which can take as arguments array
references as well as arrays), plus maxabs(), minabs(), sumbyelement(), convolute(), and
other functions.
BUGS
Please report any bugs or feature requests to "bug-math-util at rt.cpan.org", or through
the web interface at <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Math-Utils>. I will
be notified, and then you'll automatically be notified of progress on your bug as I make
changes.
SUPPORT
This module is on Github at <https://github.com/jgamble/Math-Utils>.
You can also look for information at:
• RT: CPAN's request tracker (report bugs here)
<http://rt.cpan.org/NoAuth/Bugs.html?Dist=Math-Utils>
• MetaCPAN
<https://metacpan.org/release/Math-Utils>
ACKNOWLEDGEMENTS
To J. A. R. Williams who got the ball rolling with Math::Fortran.
LICENSE AND COPYRIGHT
Copyright (c) 2017 John M. Gamble. All rights reserved. This program is free software; you
can redistribute it and/or modify it under the same terms as Perl itself.